1. No category

Woodworking Tools
Woodworking Planes
A wooden plane, from which metal planes were copied, remains the
ultimate in the plane maker’s art. A light weight wood plane is a delight
to handle and use. With the Primus adjustment, it is a precision tool,
capable of cutting so smoothly that work is near ready for finishing,
cutting so delicately that shavings can only be measured with a
micrometer. To select planes wisely, and to use them skillfully, you
should understand the design objectives and capabilities. These are
discussed in E.C. Emmerich’s “Complete Book of Woodworking Tools,”
available to download at www.ecetools.com.au
711
701 P
48 S
Primus imProved smooth Plane
Primus try Plane
moving fillister Plane
• Adjustable depth control - anti-backlash precision
adjustment of cutting iron*
• Lignum vitae sole
• Adjustable mouth
• Adjustable depth control - anti-backlash precision
adjustment of cutting iron*
• Lignum vitae sole
• Suitable for long cuts, such as doors
• Hornbeam sole
• Adjustable fence, depth stop & knife spur
• Spur is replaceable
• Suited for rabbeting with or against grain
*Refer to page 97 for a diagram
of the Primus plane cross section
cat.-no.
711
iron width
(mm)
blade angle
length
(mm)
48
50°
225
*Refer to page 97 for a diagram
of the Primus plane cross section
cat.-no.
701 P
iron width
(mm)
blade angle
length
(mm)
60
45°
600
Side view
cat.-no.
649 P
703 P
iron width
(mm)
blade angle
length
(mm)
0 -33
45°
240
48 S
adJustable block Plane
Primus Jack Plane
20 S
• Pocket sized
• Lignum vitae sole
• Adjustable depth control
• Adjustable depth control - anti-backlash precision
adjustment of cutting iron*
• Designed for general use
• Lignum vitae sole
• Common pitch blade
router Plane
• 3 blades
• Beech wood router
• Heavy gauge blade
Hang
Display
*Refer to page 97 for a diagram
of the Primus plane cross section
cat.-no.
703 P
iron width
(mm)
blade angle
length
(mm)
48
45°
240
cat.-no.
649 P
iron width
(mm)
blade angle
length
(mm)
39
50°
150
23 S
710 P
dovetail / skewed moving fillister Plane
Primus rabbet Plane
• Adjustable fence and knife spur
• Suited for moulding sloped surfaces & panel raising
• Can be used to cut sliding dovetails
• Spur is replaceable
• Adjustable depth control - anti-backlash precision
adjustment of cutting iron*
• Lignum vitae sole
710 P
iron width
(mm)
blade angle
length
(mm)
20 S
10, 15, 20
25°
240
iron width
(mm)
blade angle
length
(mm)
33
45°
240
106 S
scrub Plane
• Cut with or diagonally to the grain
• Convex iron fixed with wedge
• Hornbeam sole
*Refer to page 97 for a diagram
of the Primus plane cross section
cat.-no.
cat.-no.
iron width
(mm)
blade angle
length
(mm)
30
50°
280
Side view
cat.-no.
23 S
iron width
(mm)
blade angle
length
(mm)
0 -33
45°
240
cat.-no.
106 S
95
Made in Germany - Since 1852
297
50
edge trimmer
sPokeshave
low angle block Plane
• Square cut straight or curved edges
• Chamfer straight edges
• Used to trim overhanging waste on plastic laminates or
wood veneer
• Convex face & iron
• Adjustable for end grain
cat.-no.
iron width (mm)
description
297.00
90 x 50 x 55
edge trimmer
297.01
90 x 50 x 55
replacement blade
295
cat.-no.
iron width
(mm)
blade angle
length
(mm)
52
45°
250
50
51
cat.-no.
60
iron width
(mm)
blade angle
length
(mm)
41
20°
175
80
veneer cutter
sPokeshave
cabinet scraPer with raised handles
• 2 mm industrial grade saw blade
• Trim excess overhang flush using fence
• Cut veneers up to 1 mm thick into any size strips using
a straight edge guide
• Straight iron
• For finishing instead of using sandpaper
cat.-no.
iron width (mm)
description
295.00
150 x 100
veneer cutter
295.01
150 x 100
replacement blade
113
cat.-no.
iron width
(mm)
blade angle
length
(mm)
52
45°
250
51
55
cat.-no.
80
iron width
(mm)
blade angle
length
(mm)
70
70°
280
75
comPass / circular Plane
sPokeshave
bullnose Plane
• Adjustable sole flexes to smooth either convex or concave
surfaces.
• Concave face & iron
• Designed for use in confined spaces and to smooth
into a corner
cat.-no.
113
96
60
iron width
(mm)
blade angle
length
(mm)
44
55°
260
cat.-no.
55
iron width
(mm)
blade angle
length
(mm)
52
45°
250
cat.-no.
75
iron width
(mm)
blade angle
length
(mm)
27
40°
100
409
411
217
Precision trY square
Precision sliding bevel
marking gauge
• Without mitre on handle
• Laser metric markings
• Rosewood handle
• Blue steel blade
• Heavy brass washers
• Handle and blade works to any angle up to 180°
• Blue steel blade
• Hornbeam
• 2 individually adjustable posts
• Easy to read metric scales
NOTE:
The (217 K) circular
fence is used to
mark against
curved surfaces.
217 P
217 K
Hang
Display
Hang
Display
cat.-no.
size (mm)
409.150
150
cat.-no.
409.250
250
411
410
size (mm)
description
size (mm)
217 P
0-150
lignum vitae face
300
217 K
0-150
circular fence
412
cat.-no.
207.30
Precision trY square
Precision mitre square
cam clamP
• Mitre on handle
• Laser metric markings
• Rosewood handle
• Brass edging and rivets
• Blue steel blade
• Rosewood handle
• Brass edging and rivets
• Blue steel blade
• For glueing and clamping on delicate surfaces
• Steel rail with tough hornbeam arms & cork protection pads
Hang
Display
cat.-no.
410
size (mm)
250
Hang
Display
cat.-no.
412
size (mm)
cat.-no.
size (mm)
300
207.30
300
302
Cross section of an
Primus Plane
REgULAToR
ADjUSTing SCREW
sPring miter clamP set
• For glueing and clamping on different miter joints
• Suitable for picture frames and furniture repairs
TEnSion SCREW nUT
cat.-no.
AnTi-BACKLASH SPRing
302
97
Made in Germany - Since 1852
253 / 250 / 252 / 251 / 2503
208.35
255.00
frame (bow) saw
Panel saw
Dovetail / trenching saw
• High quality timber frame
• Heavy steel rod as tensioning element
• Varnished timber handle
• Blade with adjustable depth
253.60
Standard Saw
253
• Used to cut square lumber
• Cuts across the grain
Offset Saw
250
• Accurate fine cuts
• Suitable for tenons & dovetails
Curve Saw
252
• Narrow blade with fine teeth
• Cuts curves
Two-way Saw
251
• Rip-cutting of timbers
• Coarse set teeth
Japanese Saw
2503
• Cuts on pull stroke
• Precision sharpened, 70 HRC teeth
cat.-no.
blade length (mm)
overall length (mm)
cat.-no.
blade length (mm)
overall length (mm)
208.35
350
430
255.00
150
270
256.01
SAWS
cat.-no.
blade length
(mm)
teeth
per inch
overall length
(mm)
description
253.60
600
5
900
standard
250.60
600
9
900
offset
252.60
600
9
900
curve
251.60
600
4
900
two-way
2503.60
600
12
900
japanese
254.30
hack saw
comPass / keyhole saw
• Adjustable handle can be positioned anywhere on the
steel frame
• Varnished timber handle
• Varnished timber handle
SPARE SAW BLADES
cat.-no.
blade length
(mm)
teeth
per inch
description
253.61
600
5
spare standard blade
250.61
600
9
spare offset blade
252.61
600
9
spare curve blade
251.61
600
4
spare two-way blade
2503.61
600
12
spare japanese blade
Hang
Display
cat.-no.
blade length (mm)
overall length (mm)
cat.-no.
blade length (mm)
overall length (mm)
256.01
150
310
254.30
300
460
206.30
back saw
• Varnished timber handle
98
cat.-no.
blade length (mm)
overall length (mm)
206.30
300
410
Whilst every effort has been made to ensure the accuracy of the information supplied herein, we assume no liability for any errors or omissions.
Information contained in this document is subject to change without prior notice.