Download Report

Bali® Measuring Guide
Bay or Corner Windows
Cellular Shades, Faux Wood Blinds, Horizontal Blinds, Natural Shades, Pleated Shades, Roller and Solar Shades, Roman Shades, Vertical Solutions, Wood Blinds
Tools and Tips
• Steel tape measure — do not use cloth measuring tape
• Pencil
• Bali Measurement Worksheet – see page 3
•How to Measure Videos – visit baliblinds.com
•Measure each window and identify window
1/8"
locations – size variances are common
1/4"
3/8"
• Round measurements to the nearest 1/8"
1/2"
•Clearly record measurements – width vs. height 5/8"
3/4"
How to Measure an Angle
7/8"
•Use a protractor or angle finder to measure angles.
Two business cards can also be used as templates
(see instructions on page 2).
This measuring guide will help you to accurately measure for Outside Mount or Partially
Recessed Bay or Corner Windows. For Flush Mount Bay or Corner Windows, refer to the
standard measuring guides, specific to your blinds or shades. Visit baliblinds.com to access
product-specific measuring guides.
Corner Window
1
2
Measure Width: Measure width of each window from corner of walls to
the point you would like to cover (A & B). Record measurement.
ANGLE A-B
CEILING
CEILING
Measure Height: Measure the inside height from the top of window
casing to top of sill (H). Record measurement.
H
If corner is not 90°, angle measurement must be indicated.
B
A
Note: Manufacturer will take appropriate deductions for proper fit.
Depending on the angle, some corner blinds cannot be raised to
the same height. Horizontal slat alignment between blinds cannot be
guaranteed
ROOM WALL
ROOM WALL
SIDE
WAL
L
Three-sided Bay Window
1
easure Width (Sides): Measure width of side windows from the corners
M
to the point you would like the blind to cover (A & C). Record measurements.
2
Measure Width (Middle): Measure width of the middle window from
corner to corner (B). Record measurements.
3
Determine Angles: Determine angles between windows (A) and (B) as
well as (B) and (C). Record angles (A & B) and (B & C). If business cards
were used as templates, fax or email to Customer Service.
OR
ANGLE A-B
CEILING
ANGLE B-C
CEILING
H
A
C
B
ROOM WALL
3
easure distance from the center of the baseline (F) to the center of the
M
middle window (E).
4
Measure Height: Measure the inside height from the top of window casing
to top of sill (H). Record measurement.
Note: M
anufacturer will take appropriate deductions for proper fit.
ROOM WALL
SIDE
L
WAL
E
Depending on the angle, some bay blinds cannot be raised to the same
height. Horizontal slat alignment between blinds cannot be guaranteed
1-877-792-0002 Monday–Friday, 8:30 am to 6:00 pm EST
BACK WALL
baliblinds.com
SIDE
WAL
L
F
1 of 3
101785_v1 (02/11)
Bay or Corner Windows
Four-sided Bay Window
1
Measure Width (Sides): Measure width of side windows from the
corners to the point you would like the blind to cover (A & D). Record
measurements.
2
Measure Width (Middle): Measure width of each window from
corner to corner (B & C). Record measurements.
3
etermine Angle (A & B): Determine angle between windows (A)
D
and (B). Record angle.
4
Determine Angle (B & C): Determine angle between windows (B)
and (C). Record angle.
5
etermine Angle (C & D): Determine angle between windows (C)
D
and (D). Record angle.
6
Measure Height: Measure the inside height from the top of window
casing to top of sill (H). Record measurement.
CEILING
ANGLE A-B
CEILING
ANGLE C-D
ANGLE B-C
H
A
B
D
C
ROOM
WALL
ROOM
WALL
SIDE WALL
SIDE WALL
ALL
DE W
SIDE
SI
Note: M
anufacturer will take appropriate deductions for proper fit.
WAL
L
Depending on the angle, some bay blinds cannot be raised to the
same height. Horizontal slat alignment between blinds cannot be
guaranteed
Five-sided Bay Window
1
Measure Width (Sides): Measure width of side windows from the
corners to the point you would like the blind to cover (A & E). Record
measurements.
2
Measure Width (Middle): Measure width of each window from
corner to corner (B, C & D). Record measurements.
3
Determine Angle (A & B): Determine angle between windows (A)
and (B). Record angle.
4
Determine Angle (B & C): Determine angle between windows (B)
and (C). Record angle.
5
etermine Angle (C & D): Determine angle between windows (C)
D
and (D). Record angle.
6
etermine Angle (D & E): Determine angle between windows (D)
D
and (E). Record angle.
7
CEILING
ANGLE A-B
ANGLE D-E
ANGLE B-C
A
ANGLE C-D
H
B
C
D
E
ROOM
WALL
ROOM
WALL
ALL
EW
ALL
SIDE W
SID
easure Height: Measure the inside height from the top of window
M
casing to top of sill (H). Record measurement.
CEILING
BACK WALL
SIDE W
ALL
SID
EW
ALL
Note: M
anufacturer will take appropriate deductions for proper fit.
Depending on the angle, some bay blinds cannot be raised to the
same height. Horizontal slat alignment between blinds cannot be
guaranteed
Ordering
Measuring Angle with Business Cards
• You will need two business cards, a
piece of paper and a pencil.
• Place paper on the floor at the corner
of the angle to be measured.
ard
ess C B
usin
Busin
• Place business cards on top of
paper.
• Align one business card to each wall,
overlapping at the corner.
• Trace angle created by cards on
paper below.
• Fax or email template to Customer
Service.
WA
LL
WALL
FLOOR
ess
Ca
rd
R
PAPE
• Corner and Bay window treatments are made as individual blinds.
Each blind has independent headrail and controls.
Control locations can be on the right or left side of each blind (opposite
corners recommended).
• Identify each window location (left,center and right for bay, left and
right location for corner) and distinguish each blind as bypass or butt.
Bypass is the blind mounted into the corner. Butt is the blind butted up
to the other blind.
• For next steps and where to order, visit baliblinds.com.
• Manufacturer will take appropriate deductions for proper fit. If you do
not want vendor to take deductions, do not order as a bay or corner.
1-877-792-0002 Monday–Friday, 8:30 am to 6:00 pm EST
baliblinds.com
2 of 3
Measuring Worksheet
Bay or Corner Windows
Window Treatment 1 Location:________________________________
Width
Height (H)
Control
Butt or Bypass
Window A
o Left
o Right
o Butt
o Bypass
Window B
o Left
o Right
o Butt
o Bypass
Window C
o Left
o Right
o Butt
o Bypass
Window D
o Left
o Right
o Butt
o Bypass
Window E
o Left
o Right
o Butt
o Bypass
A&B
B&C
C&D
D&E
Angles
Blind/Shade Type
Style Name
Color Number
Options to consider:
o
Valance:_____________________________________________________
o
Other:_______________________________________________________
Window Treatment 2 Location:________________________________
Width
Height (H)
Control
Butt or Bypass
Window A
o Left
o Right
o Butt
o Bypass
Window B
o Left
o Right
o Butt
o Bypass
Window C
o Left
o Right
o Butt
o Bypass
Window D
o Left
o Right
o Butt
o Bypass
Window E
o Left
o Right
o Butt
o Bypass
A&B
B&C
C&D
D&E
Angles
Blind/Shade Type
Style Name
Color Number
Options to consider:
o
Valance:_____________________________________________________
o
Other:_______________________________________________________
Window Treatment 3 Location:________________________________
Width
Height (H)
Control
Butt or Bypass
Window A
o Left
o Right
o Butt
o Bypass
Window B
o Left
o Right
o Butt
o Bypass
Window C
o Left
o Right
o Butt
o Bypass
Window D
o Left
o Right
o Butt
o Bypass
Window E
o Left
o Right
o Butt
o Bypass
A&B
B&C
C&D
D&E
Angles
Blind/Shade Type
Style Name
Color Number
Options to consider:
o
Valance:_____________________________________________________
o
Other:_______________________________________________________
Shaded areas optional for three-, four- and five-sided bay windows
For next steps and where to buy visit: baliblinds.com
1-877-792-0002 Monday–Friday, 8:30 am to 6:00 pm EST
baliblinds.com
3 of 3
101785_v1 (02/11)