1. No category

waterproofing details
high tear resistance
waterproofing tape
self-adhesive
repair works
soprasolin
®
soprasolin® · self-adhesive waterproofing tape
Soprasolin® is a self-adhesive waterproofing tape
with a high tear-resistance.
It allows to make some detail works of waterproofing, repair, bridging...
soprasolin
®
waterproofing
tapes
Many applications areas
Soprasolin® is easy to apply on most substrates: wood, metal, concrete,
fibre-cement, zinc, rigid PVC.
It is ideal for waterproofing detail works as penetrations, ventilations,
air vents, skylights, gutters, chimney stacks, insulation protection....
Soprasolin® also enables to repair tiles, slates, gutters, wall cracks
or glass roof waterproofing.
It is also used for works of warp insulation, frame panels bridging,
wall cracks chassis, window-sill and of roof ridge.
self-adhesive waterproofing tape · soprasolin®
a number of advantages
n Highly tear-resistant and puncture resistant thanks to its reinforced frame.
n Waterproof: Soprasolin® tape is coated with elastomer bitumen that prevents
the water flow or the humidity.
n Self-adhesive: optimal tack power.
n E asy to install: Soprasolin® adheres on most materials even
at low temperatures by simple smooth down. On irregular or porous substrates,
the use of élastocol® 600 or Aquadère® Stick primer is recommended.
n F lexible: Soprasolin® is an elastomeric product ; it stays flexible
and follows the shape of the support perfectly avoiding any risks of flaw.
nA
esthetics: available in light grey, dark grey or terracotta colour,
Soprasolin® ensures an excellent wrinkle-free finish during application.
nD
urable: the aluminium foil surfacing protects the bitumen against ageing
effects of UV rays and atmospheric attacks.
a really resistant
waterproofing tape!
COLOurs
CHARACTeRISTIcs
Binder
« High tack » elastomer bitumen
Thickness
1 mm
Surface mass
1 kg/m2
Upper face
Laminated PE film, crossed and glue-backed
on aluminium foil
(lacquered in dark grey, terracotta and white colours)
Lower face
Self-adhesive bitumen and silicone release film
Tensile elongation
Longitudinal: 170 %
Transverse: 160 %
packaging
Width*
Length
Light grey
Dark grey
Terracotta
Soprasolin®
Star
installation and recommendations
n Avoid to install Soprasolin® when the temperature
is lower than 5°C. If necessary, in cold weather,
heat the substrate with a blow-torch (or, failing that,
with a hair dryer or a heat gun) and store products
in a heated room.
Rolls/box
n The substrate shall be dry and free of dust.
Porous or irregular substrates will be coated
with élastocol® 600 or Aquadère® Stick primer
(0.4 to 0.8 l/m2, drying time: 1 hour).
Soprasolin® (light grey, dark grey and terracotta)
5 cm
10 m
16
1. Unroll, place and cut the roll to the required size.
10 cm
10 m
8
2. Remove the silicone release film a few centimetres.
15 cm
10 m
8
3. Apply this part, thereby formed, on the substrate.
20 cm
10 m
4
30 cm
10 m
4
10 cm
10 m
8
20 cm
10 m
4
Soprasolin® Star
* Also available in 1 m wide
4. Remove entirely the silicone release film bond
and press firmly using a cloth.
Export Department Communication DC-15/006_EN
SOPREMA GROUP at your service
Looking for a sales contact in oder to discuss a future project or a project
that is under way? Any questions about the installation of our product range?
Contact Soprema Export department
Tel.: +33 (0)3 88 79 84 84
Fax: +33 (0)3 88 79 84 85
Email: [email protected]
Find all the information on www.soprema.com
e-mail : [email protected] - www.soprema.com
Agissez pour
le recyclage des
papiers avec
SOPREMA SAS
et Ecofolio.
ay
er w !
d
n
u
t
c
A proje solutions om
c
e
We hav oprema. 84
4
s
.
8
w
9
ww 3 88 7
Tel. +33
SOPREMA GROUP - 14 rue de Saint-Nazaire - CS 60121 - 67025 STRASBOURG Cedex - FRANCE - TEL. : +33 3 88 79 84 00 - Fax: +33 3 88 79 84 01
SOPREMA SAS WITH CAPITAL OF € 50,000,000. REGISTERED OFFICE: 14 RUE DE SAINT-NAZAIRE - 67100 STRASBOURG. POSTAL ADDRESS: CS 60121 - 67025 STRASBOURG CEDEX FRANCE. RCS STRASBOURG: 314,527,557.
SOPREMA reserves the right, as technology and know-how progress, to modify without warning the composition and conditions of use of its materials, and the subsequently their price.
As a result, orders will only be accepted on the basis of the terms and technical specifications applicable at the time of receipt.