1. No category

FMT SERIES THERMOFORMERS – FORM & TRIM
Standard Features
n
n
Heavy Duty Design – capable of 100 psi or higher form air pressure with
minimal deflection; side-actuated
toggles for long life and exceptional
platen stability.
Complete forming and trim
stations with servo platen drives.
High-Tonnage Trim Station – full index length platens for long rule life;
powerful hydraulic trimming boost;
6-inch capability above and below
sheet line; convenient rule-positioning
for exceptional accuracy.
Versatile, Precise Controls – standard
with Informer ™ Series Process
Control System.
n
Oven Control – individually controlled
zones with thermocouple feedback;
top and bottom quartz heating
elements; space-saving clamshell
design; available in a variety of
lengths.
n
Rugged Sheet Conveying and Index Design – sprocketless chain rails;
water-flooded for enhanced process
control; automatic tensioning of pin chain; adjustable hold-down bars; splined drive shaft for rapid width
adjustment.
n
FMT SERIES
Options
n
Lyle exclusive servo wedge trim
n
Quick-change tool package
n
Plug heater control
n
Servo chain rail adjustment
versatility and industry-leading performance. The FMT series
n
Custom oven-zoning layouts
features powerful and precise servo platen drives, roll unwind, oven,
n
Servo shut-height adjustment
form station, steel-rule die-trim station, parts tray and scrap winder.
n
Auto-load roll stand
n
International voltages
n
Clamp frame drive
and Lyle service and support make these machines a perfect choice
n
Servo X-Y trim position adjustment
for the custom former.
n
Upstack or downstack option
n
Robotic offload
n
Servo-controlled valving
When your requirements call for rugged, reliable thermoform and
trim capabilities in one frame, the Lyle FMT series machines offer
Simplicity of operation, ease of maintenance, rugged construction,
Pneumatic-actuated form and trim
platen drives
n
LEAD WITH LYLE
FMT SERIES THERMOFORMERS – FORM & TRIM SPECIFICATIONS
MODEL
125FMT130FMT140FMT
152FMT
Mold Size (Width x Length)
25 x 25 inches
635 x 635 mm
30 x 36 inches
762 x 914 mm
40 x 40 inches
1016 x 1016 mm
52 x 52 inches
1321 x 1321 mm
Max. Full Stroke Dry Cycle Speed CPM
48
48
45
40
Platen Stroke (Top & Bottom Form)
7 inches
178 mm
7 inches
178 mm
9 inches
229 mm
9 inches
229 mm
Platen Stroke (Top & Bottom Trim) 7 inches / 4" bottom
178 mm
7 inches / 4" bottom
178 mm
9 inches / 6" bottom
229 mm
9 inches / 6" bottom
229 mm
Form Pressure Rating 32 tons
29,030 kg
54 tons
48,988 kg
80 tons
72,575 kg
135 tons
122,470 kg
Oven Length 4 Index 100 inches
2540 mm
144 inches
3658 mm
160 inches
4064 mm
208 inches
5283 mm
Trim Force
72 tons
65,317 kg
72 - 100 tons
65,317 - 90,718 kg
150 tons
136,078 kg
150 tons
136,078 kg
Note: Additional or custom sizes are available. Please contact your Lyle Industries representative. Guards may have been altered or removed for photographic purposes; in use,
all guards must remain in place. Specifications subject to change without notice.
Servo wedge trim
Servo top trim
Servo platen drive
For more information, call 989-435-7717 or visit our website at www.lyleindustries.com.
Beaverton, MI 48612
www.lyleindustries.com
I N D U S T R I E S, L L C
Printed in USA ©2015 Lyle Industries, LLC. Informer is a trademark of Lyle Industries, LLC.
AGP14095