1. No category

KOC-VEC-PQ-Manufacturers:- ( Revision – 14 May 2015)
X.XX ( SL No. ) Indicates Main Category.
Revised
 Bullet Indicates – Sub-Categories.
-----------------------------------------------------------------------------------------------------------------------------------------------1.01 Compressors
 Rotary (Dry & Oil Flooded Type)
 Centrifugal (LP / HP)
 Reciprocating (LP / HP)
 Instrument / Plant Air
 Turbo (Gas Turbine Drivers)
1.02 Diesel Generators
1.03 Distributed Control Systems (DCS)
1.04 Flanges (Carbon Steel / Alloy Steel / Stainless Steel)
1.05 Line Pipes
 Carbon/ Alloy Steel – ERW
 Carbon/ Alloy Steel - SAW (Longituinal - Single Seam)
 Carbon /Alloy Steel - SAW (Spiral)
 Carbon /Alloy Steel – Seamless
 Stainless Steel – Seamless
 Stainless Steel - SAW (Longitudinal Single Seam)
1.06 Pipe Fittings
 Carbon/ Alloy /Stainless Steel
 Hot Tapping only
 Induction Bends
1.07 Cables (Power & Control)
 XLPE/PVC Insulated Lead Alloy Sheathed to EEMUA-133 (600/1000 Volts Only)
 XLPE/PVC Insulated Lead Alloy Sheathed to EEMUA-133 (up to 6.35/11 KV)
 XLPE/PVC Insulated PVC Sheathed (600/1000 Volts Only)
 XLPE/PVC Insulated PVC Sheathed (Upto & Including 6.35/11 KV)
 Mineral Insulated Cooper Covered (M.I.C.C.)
 Cable of Electrical Oilwell Submersible Pump.
1.08 Programmable Logic Controllers (PLC)
1.09 Pumps
 Centrifugal
 Crude Oil Export
 Submersible (Water Only)
 Fire Water (Horizontal)
 Chemical Injection / Proportioning / Metering
Page 1 of 7
 Positive Displacement
 Centrifugal (For Water Service Only)
 Special (Progressive Cavity)
1.10 Supervisory Control & Data Acquisition System (SCADA)
1.11 Actuators to API-6A ( for Wellheads)
1.12 Valves
 Ball (2" & Above)
 Butterfly
 Plug
 Check (2" & Above)
 Gate (2" & Above)
 Globe (2" & Above)
 Small Sizes (Below 2")
 Bronze Valves
 Gate (Through Conduit to API 6D)
 Fire Hydrant - Diaphragm Type
 Special Material (Monel / Titamium / Duplex / FRP)
2.02 Chokes to API-6A
 Upto & Including 5000 PSI W.P.
 Upto & Including 10000 PSI W.P.
 Upto & Including 15000 PSI W.P.
2.03 Downhole Completion Production Packers
 Standard Conventional Application (Upto & Including 5000 PSI)
 High Pressure & High Temperature (Upto & Including 10000 PSI)
 High Pressure & High Temperature (Upto & Including 15000 PSI)
2.04 Sliding Side Doors (SSD)
2.05 Landing Nipples
2.06 Liner Hangers
 Low Pressure & Low Temperature
 High Pressure & High Temperature
2.07 Transformers (Oil Filled Type & Dry Type)
2.08 Uninterrupted Power Supply Systems (UPS)
2.09 L.V. Switchboards
 Low Voltage/Motor Control Centre (440V)
 Feeder Pillars & Lighting Distribution Boards
2.10 H.V. Switchboards
 High Voltage (3.3 KV & 11 KV)
 SF6 Ring Main Units 3.3 & 11 KV
2.11 Cable Glands & Junction Boxes
 Cable Glands
 Junction Boxes (Electrical)
Page 2 of 7
2.12 Emergency Shutdown Supply Systems (ESD)
2.13 Valve Actuators
 Electrical
 Pneumatic & Hydraulic
2.14 Relief Valves & Rupture Disk
 Relief Valves
 Rupture Disks
2.15 Instrument Panels with Instruments
2.16 Impulse Piping, Tubing & Fittings
 Impulse Piping, Tubing & Fittings
 Instrumentation Valves
2.17 Control Valves
2.18 Instrument & Compensating Cables
2.19 Analysers
2.20 Diesel Engines / Gas Engines
2.21 Gas Turbines
2.22 Desalter Packages
2.23 Flow Metering Packages (For O.E Manufacturers-Flow Meters)
2.24 Fire Water Pumps Packages
2.25 Chemical Injection Packages
2.26 Instrument Air Compressor Packages
2.27 Marine Hoses
 Single Carcass
 Double Carcass
2.28 Wellhead & X-Mass Tree Equipment to API-6A
 Upto and Including 5000 PSI W.P.
 Upto and Including 10000 PSI W.P.
 Upto and Including 15000 PSI W.P.
3.01 Air Cooled Heat Exchangers
3.02 Alarm Annunciators
3.03 Alternators
3.04 Boilers / Steam Generators
3.05 Breather Valves
3.06 OCTG (Casing, Tubing & Premium Connections)
 Seamless Casing to API 5CT with API Connections
 Seamless Tubing to API 5CT with API Connections
 Proprietary Premium Connections for Development/Cretaceous Well Applications.
 ERW Casing with API Connection
 Seamless - Casing & Tubing for Deepwell Application
 Proprietary Premium Connections For Deepwell Applications.
3.07 Columns (Absorber/Internal Strippers)
3.08 Controllers (Pressure, Temperature, Level & Flow)
 Electronic
 Pneumatic
Page 3 of 7
3.09 Cooling Towers, Water
3.10 Demineralizer Packages
3.11 Flame Proof Electrical Apparatus
3.12 Filtration Units
3.13 Fire, Smoke & Gas Detection Systems
 Fire, Smoke & Gas Detection Systems
 Gas Detection System Only
 For Logic System Only
 Fire & Smoke Detection Systems Only
3.14 Fired Heaters
3.15 Flares
3.16 Flow Orifice Plates & Holders
3.17 Gas Turbine Controls & Monitoring Systems
 Gas Turbine Controls & Monitoring Systems
 For Vibration Monitoring Only
3.18 Glycol Gas Dehydration Packages
3.19 GRP/GRE/RTRP/FRP Pipes & Fittings
3.20 Heat Exchangers (Shell & Tube Type)
3.21 Injection Water Treatment Packages
3.22 Instrument Air Dryers Packages
3.23 Level Gauges
3.24 Level Transmitters (Displacer Type)
3.25 Lifting Equipment(Crane/Hoist)
3.26 Light Fittings
 Domestic / Decorative
 Hazardous Area
 Industrial Type
 Marine Search Lights
3.27 Molecular Sieve Dehydration Units
3.28 Motors (Electric)
3.29 Oily Water Treatment / Separation Packages
3.30 Pig / Scrapper Traps
3.31 Pressure/Differential Pressure Gauges
3.32 Pressure & Temperature Switches
3.33 Pressure Vessels
3.34 Protective Relays
3.35 Pup Joints (Casing & Tubing)
3.36 Tank Gauges (Local Gauges Boards Type for indication, Servo Radar/Capacity Type for Remort
Indication and Tank Management System)
3.38 Temperature Gauges (With Thermowells)
3.39 Temperature Transmitters (With Elements & Thermowells)
4.01 DC Supply Units (110 Volts)
4.02 Cable Jointing & Termination Kits
4.03 Fibre Optic Cables
4.04 Flow Meters
Page 4 of 7
4.05 Heat Exchangers (Plate Type)
4.06 Impressed Current Graphite Anodes
4.07 Indirect Type Oilfired Heaters
4.08 Level Switches (Displacer /Float Type)
4.09 Oil & Gas Seperators
4.10 Pressure Regulators (Self Acting)
4.11 Pressure / Differential Pressure Transmitters
4.12 Solenoid Valves
4.14 Transformer Rectifier units for cathodic protection
5.01 Plastic Pipes & Fittings
 HDPE for Brackish & Potable Water
 UPVC & PVC Pipe
 Reinforced Thermoplastic Pipes (RTP)
 HDPE/PE-100 Pipes for Gas Service Below 40 Degree Celcius Only
 Sanitory & Storm Water
5.02 Floating Tank Roof Seals & Tank Accessories
5.03 CCTV (Closed Circuit Television) System
5.04 A.C. Units (Industrial / Commercial Type)
 Room Air Conditioners, Split Type Air Conditioning Units, Package Units, Split Air Conditioning Systems
 Air Cooled / Water Cooled Package Chillers - Reciprocating / Screw / Scroll Compressors
 Centrifugal and Absorption Chillers
5.05 A.C. Units (Hazardous Location / Severe Duty)
5.06 Air Handling / Fan Coil / VAV Units
5.07 Fire Hose 2 1/2 " Diameter X 100 feet with Instantaneous Couplings
5.08 Fire Extinguisher Dry Powder - 12 Kgs
5.09 Fire Extinguisher Water Type - 9 Liters
5.10 Fire Extinguisher Carbon Dioxide Type 5 Kgs
5.11 Flouroprotein Foam Liquid Concentrate in 5 Imperial Gallon Containers
5.12 Flouroprotein Foam Liquid Concentrate in 45 Imperial Gallon Containers.
5.14 Safety Shoes (Boots, Long Boots & Shoes)
5.15 Coveralls (Single Piece and Two Opieces : 100% Cotton and Inherent Flame Resistant.)
6.01 Hydrocyclone Packages (for Oily Water Separation)
6.02 Hard Hat (Industrial Use)
6.03 Mill Applied Fusion Bonded Epoxy Applicators
6.04 Mill Applied Three Layers Extruded HDPE Applicators
6.05 Industrial Painting Products and Systems
 Acrylic Polyurethene
 Fast Curing Epoxy
 Fiber Glass Lining
 Fire Proofing
 Glass Flake
 HB Epoxy MIO
 Heat Shrink Sleeve
 High Build Epoxy
 High Build Polyurethane
Page 5 of 7
 High Temperature Acrylic modified Silicone
 Inorganic Zinc Silicate
 Phenoloic/Novalac Epoxy
 Solvent Free Epoxy
 Two Pack High-Build Epoxy (Surface Tolerant)
 Zinc Free Inorganic Silicate
 Zinc Phosphate Epoxy
 Zinc Rich Epoxy
6.09 Flame Arrestors
6.10 Welding Products
6.11 Internal Corrosion Monitoring Probe System
6.13 HSE - Body Protection
 Body Aprons
 Chemical Suits
 Biological Suits
 Asbestos Suits ( for handling Asbestos )
 Full Body Safety Harness
 Fall Arrestors
 Long Rubber Boots
 Rain Coats
 Safety Winter Jackets (100 Percent Cotton and inherent Flame Resistant(IFR) material
6.14 HSE - Respiratory Protection /Breathing Apparatus
 Masks (Dust/ Paticulate/ Gas/ Asbestos)
 Escape Masks
 SCBA ( Self Contained Breathing Apparatus )
 Canister Type Gas Masks
 HEPA (High Efficiency Particulate Air) Masks
6.15 HSE – Face, Ear & Eye Protection.
 Eye Protection Goggles(Chemical Resistance)
 Ear Muffs & Ear Plugs
6.16 HSE - Hand protection
 Chemical Resistance Coated, Disposable Electrical Lineman's General Purpose(Cotton), Heat Resistant &
Welders's GLOVES.
6.17 HSE - General Items
 Safety Torches
 Personnel H2S Detectors
 Portable Multi Gas Detectors
 Explosimeters
 Portable Strobe Light
 Glow Stick
 Noise Measuring Instruments
7.01 OIL in Water Analysers
8.01 Marine Ropes (Nylon/Polyster/Ployproplylene/ Manila/Sisal)
8.02 Electric Surface Heating (for Hazardous areas)
Page 6 of 7
8.04 E-SCADA System (Electrical SCADA System)
9.01 H.V. Switchboards - High Voltage-Double Busbar : 11KV, 40KA, 3 Seconds Rated.
9.02 Crude Oil/Gas Treatment Chemicals
 Demulsifiers/Reverse Demulsifiers
 Gas and Condensate Inhibitor
 Antifoam
 Single function Scale Inhibitor
 Single function Corrosion Inhibitor
 Dual Scale & Corrosion Inhibitor
 Oxygen Scavenger
 Rust & Oxidation Inhibitor
 Drag Reducing Agent
 Methanol
 Tri-ethylene Glycol
9.03 Sea Water Treatment Chemicals Package (Coagulant, Anionic polyelectrolyte, Cationic polyelectrolyte,
Antifoam, Scale Inhibitor, Corrosion Inhibitor, Biocide A, Biocide B & Oxygen Scavenger.)
9.04 Effluent Water Treatment Chemicals Package (Scale inhibitor, Corrosion inhibitor, Biocide A, Biocide B
& Oxygen Scavenger.)
10.01 Casing Hardware Equipment
 Floating Equipment
 Centralization Equipment
 Annulus Casing Packers
 Stage Cementing Tools
10.02 Multiphase Flow Meters (Special Application for Wellhead Monitoring)
11.01 Line Pipes (API-5L:LSAW/ERW above 20”) for OCTG Application
11.02 Progressive Cavity Pumping System (PCP)
 Downhole PCP (Rotor & Stator).
 Sucker rod for PCP pumping system.
11.03 Sucker Rod Pumping System (Mechanical / Hydraulic) (SRP)
 Reciprocating Pump Unit (Mechanical and/or Hydraulic) for SRP Pumping system.
 Downhole sucker rod Pump (Barrel & Plunger) for SRP system.
 Sucker rod for SRP pumping system.
11.06 Flow Metering Packages (For Packager, Integrator, Assembler)
11.07 GAS Sweeting System & GAS Compression System
12.01 Fire Suppression System ( Gaseous Based )
Page 7 of 7