eriX.advanced Communications Management for Command & Control centres and Mobile Command vehicles Seamless integration eriX.advanced is a scalable system for misson critical communications. It integrates services like telephony-, radio-, and intercom despatching, alerting as well as facility control and resource management for public safety vehicles and responders. The emergency processes can be distributed to any number of workstations. Each of them can consist of up to 8 channels of voice recording and documentation. In addition, all key processes are automatically logged. The individual eriX.advanced workstations can be linked together other and to other subsystems via LAN and there are interfaces to command & control systems. Key features •• Simple operation (universal touch user interface) •• Connection of analogue radio devices •• Connection of Motorola, Sepura and other TETRA radio devices •• Analogue and digital alerting •• Telephony via VoIP/SIP •• Integrated voice documentation up to eight channels per workstation •• Full integration of building management (including EIB/KNX) via LAN •• Installation on any Windows 7/8 operating system •• Innovative, fault tolerant system (FTS) architecture, no server needed Touchscreen Audio-Interface LAN TETRA BOS radio devices POCSAG receivers Analogue radio devices www.swissphone.com GSM / SMS Building automation FMS / SDS Voice documentation Digital alerting Analogue alerting Dispatch system interface EN 04.2014 psB26 v2 BIK Simple operation The eriX.advanced software is developed to ensure quick and simple operation for the user. This way, users do not need to undergo extensive, complicated training. At the same time, the simple operating concept increases the level of operator acceptance. Top voice quality eriX.advanced offers a high level of voice quality thanks to a newly developed audio interface (AIF) unit. All analogue signals are digitalised and handled by using a digital signal processor. This way, it is possible to simply and flexibly route all audio paths to any of the four built in speaker amplifiers and other communications devices. Telephony eriX.advanced uses Voice over IP (VoIP) for telephony, but still providing analogue und digital (e.g. ISDN) ports. As a result, there are no limitations to the telephone system. All telephone data can be transmitted compatibly thanks to the global standard SIP protocol. It is also possible to connect door/intercom systems via this protocol. eriX.advanced also features a convenient telephone book with a time-saving participant search function. Radio or PA eriX.advanced can control and simultaneously listen to up to 16 radio- or public address (PA) channels. The radio devices are connected to the system unit (SM1) via audio- and data interface using specific or standard protocols (e.g. PEI). Status monitor eriX.advanced integrates a flexible status monitor software (e.g. FMS) to track and monitor up to several hundred operating resources including a history and printing function. It is possible to automatically or manually capture and display the status of resources such as vehicles or personnel. Alerting eriX.advanced enables analogue and digital alerting in accordance with the POCSAG standard. It is possible to trigger pagers, sirens and vehicle based radio communication systems (like FDM.X) with both alerting methods. The emergency services can be alerted with just a few clicks. IDEA encryption can be integrated into the digital alarm in order to protect against unauthorised access. Building automation eriX.advanced provides high modularity in building automation thanks to various different plugin units. It does not matter whether conventional relay technology or networking via EIB/KNX Instabus is used. An important feature is that building automation is connected by LAN, allowing every workstation and distributed Touchpanels to control the hardware. Interfaces eriX.advanced consists of several data interfaces, among these is the XML-based Command & Control (C&C) interface. This way, these systems can exchange communication and status information, five-tone, POCSAG and telephony data with eriX.advanced. The «FMS 32» interface allows you to link additional software programs. I.SEARCH As an option, the I.SEARCH paging and information system can be connected to eriX.advanced for local notification and alerting. The digital POCSAG standard makes it possible to transmit predefined texts to digital pagers or send any texts to the pagers via email input. Swissphone Wireless AG Fälmisstrasse 21 CH-8833 Samstagern Tel: +41 44 786 77 70 Fax:+41 44 786 77 71 [email protected] www.swissphone.com Swissphone Telecommunications GmbH Industriestr. 51 D-79194 Gundelfingen Tel: +49 761 59 05 0 Fax:+49 761 59 05 100 [email protected] www.swissphone.de Swissphone Austria GmbH Dresdnerstr. 68 A-1200 Wien Tel: +43 1 493 13 41 Fax:+43 1 493 13 41 17 [email protected] www.swissphone.at
© Copyright 2024