Download Report

Phosphorescent bumper
Satisfy Professional's Needs
Cordless Impact Driver
DTD148
HIGH POWER
LED Job light with pre-glow
and afterglow functions
• On pulling switch trigger, the
light automatically turns on
before motor starts turning.
• Keeps on illuminating about
12-13 sec. after trigger release.
• With a manual on-off switch for
the activation system
Ergonomically designed
handle with soft grip
provides comfortable grip and more
control while minimizing hand fatigue
and pain.
Battery fuel gauge
Belt clip
175
N•m
DTD148
Dust and drip-proof performance
is enhanced for use in outdoor
applications or harsh environments.
Photo: DTD148
Battery
BL1830: 18V 3.0Ah
BL1840: 18V 4.0Ah
BL1850: 18V 5.0Ah
Charger
DC18RA
DC18RC
DC18SD
Charging time (3.0Ah)
60minutes
DC18SE (Automotive)
Charging time (3.0Ah)
60minutes
DC18SF
Charging time (3.0Ah)
1 to 2 batteries : 60minutes
3 to 4 batteries : 120minutes
Charging time (3.0Ah)
22minutes
Cordless Impact Driver
DTD148RFE/DTD148Z (Available as Skin Only)
Variable Speed
Brake
Capacity
Reversing
Electronic 3-Speed
Built-in Job Light
Carrying Case
Standard Equipment :
Fast Charger, Battery Cartridge
Impacts per minute (ipm)
No load speed (rpm)
Max. fastening torque
Dimensions (L x W x H)
Net weight*
DTD148
Machine screw : M4 - M8 (5/32" - 5/16")
Standard bolt : M5 - M16 (3/16" - 5/8")
High tensile bolt : M5 - M14 (3/16" - 9/16")
Coarse thread (in length): 22 - 125mm (7/8" - 4-7/8")
3rd : 0-3,800 2nd : 0-2,600 1st : 0-1,100
3rd : 0-3,600 2nd : 0-2,100 1st : 0-1,100
175N·m (1,550in.lbs)
BL1850: 119x79x238mm (4-11/16"x3-1/8"x9-3/8")
BL18215: 119x79x220mm (4-11/16"x3-1/8"x8-5/8")
BL1850: 1.5kg (3.3lbs)
BL1815: 1.2kg (2.8lbs)
LONGER RUNTIME
Items of standard equipment and specifications may vary by country or area.
*weight according to EPTA-Procedure 01/2003
Makita New Zealand Ltd.
15 Orbit Drive, Mairangi Bay
PO Box 100 914, North Shore, Auckland 0745
Fax 0800 600 601 Sales 09 4798251
Visit our website for information and tool features :
www.makita.co.nz
Photo : DTD148
Tool does not come with bit.
Powerful
High Performance
More Compact
"T" mode: Fastening mode for
self-tapping screw
175 N.m
35%faster
119 mm
"T" mode is a special mode for optimum fast tightening of self-tapping screws
without damaging the screw and the workpiece. In this mode, first, the tool drills
in the workpiece quickly with the tip of self-tapping screw at 3,600rpm, with the
rotational speed of "Hard" mode. Then, when the tool starts impacting, the builtin electronic controller automatically reduces the rotational speed and the
impact speed to 2,100rpm and 2,600ipm, to that of "Medium" mode in order not
to twist off nor to strip out the screw head. Finally, with the
"Soft" power mode, the tool drives the screw into place without damaging the
screw and the workpiece.
DTD148 : 18V
DTD148 : with BL1840
Compared with the predecessor model
10mm more compact than the predecessor model
3 stage impact
power selection
Power selection
“T” mode
In order to reduce fault
tightening, hard/medium/soft
impact power can be selected to
the material of workpiece or
screw type simply by pushing a
button.
119mm
Battery fuel gauge
Battery fuel gauge
The power remaining in the battery can be indicated in 3 stages
simply by pushing a button;
3 lights on: more than 50% of full battery capacity
2 lights on: 20% to 50% of full battery capacity
1 light on : less than 20% of full battery capacity
Photo: DTD148
Photo: DTD148
High Performance with
Brushless DC Motor
Brushless DC motor
:: Maintenance-free due to no brushes
:: Energy production is more efficient than brushed DC motor because
of no friction loss caused by brushes, enabling to lower amperage for
reduced heat production and increased work amount on a single full
battery charge.
Durable against long continuous
operation
:: Use of BLDC motor lowers heat production; the temperature rise
at housing surface can be reduced well even in hard industrial
applications requiring continuous long operation.
Photo: DTD148
More work amount on a single
full battery charge
:: Thanks to the very efficient energy production of BLDC motor,
work amount on a single full battery charge is increased.
:: Life time work amount of a battery is increased, reducing the
battery cost.
Test: Drove 65mm coarse thread screw into melapi.
DTD148
(4.0Ah Battery)
predecessor model
(4.0Ah Battery)
110
100
Photo: DTD148