1. No category

NB604N ADSL2+ Wireless N300 Modem
Router
Firmware Release Notes
Copyright
Copyright© 2015 NetComm Wireless Limited. All rights reserved.
The information contained herein is proprietary to NetComm Wireless. No part of this document may be translated, transcribed,
reproduced, in any form, or by any means without prior written consent of NetComm Wireless.
Note: This document is subject to change without notice.
This document covers the following products:
NetComm Wireless NB604N
DOCUMENT VERSION
DATE
1.0 - Initial document release
12/09/2014
1.1 - Updated for firmware version GAN5.CZ56T-B-NC.AU-R4B033
18/03/2015
1.2 – Updated for firmware version GAN5.CZ56T-B-NC.AU-R4B035.EN
29/04/ 2015
Table 1 - Document Revision History
NetComm Wireless NB604N Firmware Release Notes
2
www.netcommwireless.com
v1.2
Firmware Details
ITEM
DESCRIPTION
Model
NB604N
Product Name
ADSL2+ Wireless N300 Modem Router
Date
29 April 2015
Firmware Version
GAN5.CZ56T-B-NC.AU-R4B035.EN
Official / Beta Firmware
Official
File Name
GAN5.CZ56T-B-NC.AUR4B035.EN(NB604N)_upgrade.EN
File Size
6.75 MB
MD5 Checksum
E708DBD81149890853D32E4974495729
Firmware Upgrade Instructions
1.
Connect the supplied RJ-45 Ethernet cable from the Ethernet Port on the back of the device to your computer.
2.
Connect the supplied power adapter to your router and press the on/off button to power the router on.
3.
Allow 60 – 90 seconds for the NB604N to power up.
4.
Open a web browser (e.g. Internet Explorer, Firefox, Safari, etc) and type http://192.168.1.1 into the address bar and
press Enter.
5.
At the login screen, type admin into both the Username and the Password fields and click OK.
6.
Select Management from the menu on the right and then Update Software from the menu that appears below
Management.
7.
Select the Browse button to locate and load the new firmware file.
www.netcommwireless.com
v1.2
NetComm Wireless NB604N Firmware Release Notes
3
8.
Click the Update Software button to proceed.
The process takes approximately 2 minutes.
When the update is complete, the router automatically reboots.
9.
To confirm the firmware version number in use, log in to the device again and compare the Software Version number
displayed on the Device Info page with the version of the file you installed.
10. To complete the upgrade, you must reset the device to factory default settings. Select Management from the menu on the
right of the screen and then select Settings and then Restore Default. Click the Restore Default Settings button then click
the OK button to confirm.
Note: You must reset the router to the default settings after the firmware upgrade to ensure that it functions correctly.
NetComm Wireless NB604N Firmware Release Notes
4
www.netcommwireless.com
v1.2
Click the OK button on the window that appears.
The router reboots.
The firmware upgrade is complete.
www.netcommwireless.com
v1.2
NetComm Wireless NB604N Firmware Release Notes
5
Version History
GAN5.CZ56T-B-NC.AU-R4B035.EN
New features
None.
Bug fixes
Fixed an IPV6 connectivity issue.
Fixed an issue where a USB drive was not accessible via Samba protocol after reboot.
Fixed some cosmetic issues.
Known issues
None.
GAN5.CZ56T-B-NC.AU-R4B033.EN
New features
Added IPTV support
Bug fixes
Fixed an issue where certain functions do not operate correctly on the WAN side when Remote Management is on.
Fixed DHCP Option 60 function.
Fixed URL filtering Issue.
Fixed unit stability when Remote Management is enabled. Fixed unit stability when Remote Management is enabled.
Known issues
None.
GAN5.CZ56T-B-NC.AU-R4B030.EN
New features
None.
Bug fixes
Fixed a WiFi passkey vulnerability by supporting the single quote character in the WPA key variable.
Known issues
None.
GAN5.CZ56T-B-NC.TPG-R4B010-AU.EN – Initial production release
New features
None.
Bug fixes
None.
Known issues
None.
NetComm Wireless NB604N Firmware Release Notes
6
www.netcommwireless.com
v1.2