Mon Valley Works
ICD Training Schedule
2015 Spring
Mon Valley Works ICD, One South Linden Street, Duquesne, PA 15110
www.monvalleyicd.com
Phone: 412.460.0390
Class Highlights
INSIDE THIS ISSUE
2
Pre Learner Maintenance
Training Program
CDL License Information
Fitness Trainer Certificate
3
4
5
PA State Safety
Inspection Certificate
Irvin Union Hall Class
Small Engine Repair
This program includes classroom preparation
and test to become a licensed PA State Inspection Mechanic. (See Page 7
ICD Training Hub Classes
Financial Workshops
for details.)
ICD Training Hub Classes
Stick/MIG/TIG Welding
Sign Language-Advanced
Computers
CERTIFICATION
ICD Training Hub Classes
Computer Software Seminars
The ServSafe Food Protection Manager Certification is a national
industry certification that qualifies a worker in a restaurant setting. (See
SERVSAFE FOOD PROTECTION MANAGER
page 11 for details)
6
Steel Center Classes
12
Driving Directions
STICK/MIG/TIG WELDING—BEGINNER &
INTERMEDIATE (HUB)
We will once again be offering this class at the HUB. Class size is limited,
so enroll early. (See page 4 for details)
Coordinator
Mike Ondrish
[email protected]
Phone: 412.460.0390
For more information on the classes,
check out the Class Schedule
section, or visit us on the web at
www.monvalleyicd.com
Visit us on Facebook - Monvalley Icd
Simply Cooking Offered in New Year!
We will once again be offering the Simply Cooking Course at Steel
Center.
Simply Cooking explores in-depth methods of cooking for one specific
area per week. (See page 10 for details.)
Page 2
2015 Spring
Mon Valley ICD Special Training Programs
PRE-LEARNER MAINTENANCE TRAINING PROGRAM
Retirees and Maintenance Technician’s are not eligible for this program
Per our 2008 Labor agreement and in an effort to facilitate testing to enter the Mechanical or
Electrical maintenance training program, U.S. Steel and the United Steelworkers have chosen an
online standardized Pre-Learner Maintenance Training Program to provide employees with the
opportunity to acquire the necessary skills and knowledge to test at a higher level when entering
into the Maintenance Training Program.
Any student who does not have access to a computer should contact the Career Development Center to make
arrangements to use the Center computers. If a student needs training in computer basics, it can be provided through
Career Development.
The Program will be administered through the local ICD Program located at the Mon Valley Training Hub. Contact the
coordinator for additional details.
STUDENTS ARE ADVISED THAT COURSE COMPLETION DOES NOT GUARANTEE THEM A MAINTENANCE TECHNICIAN POSITION. ALL ADDITIONAL
REQUIREMENTS TO BECOME A LEARNER OR MAINTENANCE TECHNICIAN MUST STILL BE MET.
ENTRANCE REQUIREMENTS

Students must…
o
be an active nonmaintenance Steelworker
o register with an ICD
Coordinator for the PreLearner Program by calling
(412) 460-0390
o have a valid Email address
o must take the classes on
their own time
COMPLETION REQUIREMENTS





A passing score of (85%)
Completion of all required
classes, labs and tests
All classes must be taken in the
order they are given and all
coursework must be completed.
Certificate of completion from
ICD and course transcript and
performance will be provided to
the Company upon
“graduation”.
All class work can be completed
online at the student’s
convenience.
CDL License Course
This course is a combination of self-study and hands-on training offered through All State
Careers. Those interested in taking this course will meet individually with a representative from
our educational provider. Information on obtaining a Class 'A" CDL permit, locations to get the
required D.O.T. Driver Physical and Drug Screen, and the self-study material will be available at
that time.
Fitness Trainer Certificate
•
•
•
•
•
•
Names are currently being taken for this program
Program is 36 months long
Location: Center for Fitness and Health at Willow Point, Belle Vernon
Qualifies you to take the National Fitness Certification Exam
Class meets once a week (4 time slots to accommodate shift work)
Topics change every 3 months
Contact the Mon Valley ICD coordinator for details on any of these programs.
Page 3
Mon Valley Works ICD
Irvin Union Hall
SMALL ENGINE REPAIR –BACK TO BASICS
Wednesday * March 4, 2015 – May 13, 2015 * 4:30 PM – 7:30 PM * 10
Sessions * Pete Kurka
Starting at the basics you will be guided through the
how's and why's of small gas engines such as chain saw chains and tune-ups of both two
and four cycle engines, with the emphasis on air-cooled overhead valve small engines.
During the hands-on portion, you will be able to bring in your own equipment,
troubleshoot and repair it to your satisfaction. The instructor will oversee and guide you
in your work. Repairs can consist of anything from minor tune-ups to complete
overhauls.
.
Mon Valley ICD Training Hub
Financial Workshops
SOCIAL SECURITY WORKSHOP
Tuesday, March 17, 2015, 4:30 PM – 6:30 PM, 1 session
If you are planning to retire this year, you must understand how to maximize you SS income. Making the
wrong choice could cost your family a hundred thousand dollars. Find out how your choice could have a
major impact on your spouse and understand the effects of divorce on Social Security. Many other aspects of
SS will be discussed. Get your questions answered.
CREATING SUSTAINABLE RETIREMENT INCOME WORKSHOP
Tuesday, March 3, 2015, 4:30 PM – 6:30 PM, 1 session
When you retire, your income stream has to remain predictable so that you can enjoy your retirement after
all of the years of work. Learn to avoid mistakes that could cost you tens of thousands of dollars in additional
taxes. Learn steps to make sure that your retirement income is as dependable as your paycheck. There will
be a discussion of different ways to generate income and how to decide which way is best for you and your
spouse.
CYBER SECURITY
Tuesday, March 10, 2015, 4:30 PM – 6:30 PM, 1 session
Every day on the news we hear about another company’s data base being hacked
and subjecting their customers to ID theft. This workshop will help you do a Cyber
assessment on your family and look for ways to improve your safety. ID theft is
time consuming and expensive to deal with if you identity has been stolen. Make
your family safe today and find out how to continue this protection in the future.
Everyone that uses the internet is at risk for a Cyber attack.
Page 4
2015 Spring
Mon Valley ICD Training Hub
Miscellaneous Classes
STICK/MIG/TIG WELDING
(8 Sessions)
Tuesdays & Thursdays April 7, 2015 – May 28, 2015
*Class Time: 4:30 PM – 7:00 PM * Instructor: Glen Payne
Students will learn the difference between MIG and TIG welding. Students will get
the opportunity to practice the different concepts. TIG welding also specializes in
fusing pieces of aluminum together. MIG short for metal inert gas , is a welding
process that specializes in covering aluminum and other metals not made of iron. Class size limited to 8.
SIGN LANGUAGE—ADVANCED LEVEL
(6 Sessions)
Mondays April 20, 2015 – May 25, 2015 *Class Time: 4:30 PM – 7:00 PM *
Instructor: Deanna Baker
Students will continue learn to sign language. This course will expand on
expressive and receptive vocabulary and grammar skills. This class will focus on specific topics such as,
classifiers, directionality and dialogues as well as language structure and deaf culture. Class size limited to 8.
Mon Valley ICD Training Hub
Computers
Class Times:
1:30 PM – 4:00 or
4:30 PM – 7:00 PM
CREATE YOUR OWN WEBSITE
Thursdays, March 5, 2015 – April 9, 2015
Instructor: Carol Shoemaker
Do you want to build web pages, but have no previous experience? This friendly guide is the perfect place to
start. You’ll begin at square one, learning how the Web and web pages work, and then steadily build from
there. By the end of this course, you’ll have the skills to create a simple site and publish it on the web. This
course is ideal for beginners who have no prior experience in web design. Textbook supplied for this class.
BUY/BUILD THE PERFECT COMPUTER
Thursdays, April 16, 2015 – May 21, 2015
Instructor: Carol Shoemaker
Even if you’re not a total geek you can build your own PC . You’ll discover that the quality is better and the
cost is much lower than any comparable off-the-shelf PC you can buy. In this class, you will design the custom
computer you want, and have fun doing it. The textbook supplied covers six different types of computers to
build
Page 5
Mon Valley Works ICD
Mon Valley ICD Training Hub
Computers- Software Seminars
Class Times:
1:30 PM – 4:00 or 4:30 PM – 7:00 PM
WORKING IN THE CLOUD
Wednesdays, April 1, 2015
Instructor: Donna Kuzemka
This course is designed as an introduction to cloud storage. The focus will be on
storage areas that are free to the user, and can be used to house their files for easier
retrieval. Advantages and disadvantages will be discussed.
WHO DO YOU THINK YOU ARE?
Wednesday, May 6, 2015
Instructor: Donna Kuzemka
If you are anxious to begin researching your family tree, this course will act as an
introduction to some sites that will allow you to search and create information about
your family tree.
SHARING YOUR DIGITAL PHOTOS
Wednesday, June 3, 2015
Instructor: Donna Kuzemka
This course will give ideas on storing and sharing your digital photos, storing your photos
online and new ways to share your photos. Emphasis will be on the free sites available.
Page 6
2015 Spring
Steel Center Classes
Automotive - 4:30 PM - 8:30 PM
Unless otherwise noted
Location: Steel Center for Career & Technical Education
AUTO BODY REPAIR
(8 sessions)
Instructor: Rich Ballog
Wednesdays, March 4, 2015 – April 22, 2015 or Thursdays, March 5, 2015 – April
23, 2015
The course will teach how to repair minor dents and structural damage. Also, it will teach the different types
of paints, primers, and how to use technology for gluing plastics by using the new epoxy glues. Painting and
different clear coats will be covered. (All supplies included except paint and clears.) Class Size Limited to 8.
AUTO DETAILING
(4 Sessions)
Wednesdays, April 29, 2015 – May 20, 2015 * Instructor, Rich Ballog or
Thursdays, April 30, 2015 – May 21, 2015 * Instructor, Chuck Hicks
This course will teach the proper way to clean a car from the inside out including detailing
the engine compartment. Topics will include interior as well as exterior cleaning through demonstration and
hands-on experiences. Class size limited to 8.
AUTOMOTIVE MAINTENANCE—BASIC
Instructor, Greg Siwik
(6 Sessions)
Class Time: 5:00 PM – 9:00 PM Thursdays, March 5, 2015 – April 9, 2015
This class is for the student who wants to learn basic automobile maintenance. It will include demonstrations
on how to change oil, brakes, and tires on an automobile, and how to diagnose engine problems. Instruction
will review automotive operations and common repair techniques. Students will become
familiar with the basics of preventive maintenance, emergency repairs and the operational
systems of the automobile. Class size limited to 8.
AUTOMOTIVE MAINTENANCE—INTERMEDIATE
Instructor, Greg Siwik
Class Time: 5:00 PM – 9:00 PM
Thursdays, April 6, 2015 – May 7, 2015
This auto mechanics program will teach students intermediate fundamentals of auto mechanics including
brake systems, engine repair, diagnostic techniques and electrical/electronic systems. Students will learn how
to replace, repair and diagnosis car troubles. Hands on experience will be a part of this program. Students
must have already taken an introduction auto mechanics repair course to be eligible for this program. Class
size limited to 8.
Page 7
Mon Valley Works ICD
Steel Center Classes
Location: Steel Center for Career & Technical Education
Automotive - 4:30 PM - 8:30 PM
Unless otherwise noted
PA STATE SAFETY INSPECTION CERTIFICATION
(5
Sessions)
Mondays & Wednesdays March 16, 2015 – April 6, 2015
Tactile: April 13, 2015
Class Time: 5:00 PM – 9:00 PM Instructor: Ed Powell
This program includes classroom preparation and test to become a licensed PA State
Inspection Mechanic. Students must possess a valid driver’s license presented the
first day of class and be 18 years of age. Students will need to successfully pass a written exam and hands-on
tactile test to receive their license from the state. Class size limited to 8.
Construction/HVAC
4:30 PM - 8:30 PM - Unless otherwise noted
HOW TO TRIM – WINDOWS, BASEBOARDS
(2 SESSIONS)
Mondays March 2, 2015 – March 9, 2015 * Class Time: 5:00 PM – 9:00 PM * Instructor: Bob Bergam
The trim of windows walls and doors are a part of the finite details of finishing a construction project. This
course will cover appropriate materials, aesthetics, and details to give a wall, or door an appropriate finish.
Class size limited to 8.
HOW TO REPAIR AND REPLACE BATHROOM AND KITCHEN FIXTURES
(3 Sessions)
Mondays March 23, 2015 – April 6, 2015 * Class Time: 5:00 PM – 8:00 PM * Instructor: Bob Bergamasco
Is your sink or shower in desperate need of repair or replacement? Find the true potential of the kitchen or
bathroom area. These mix & match construction classes will teach you how to complete vanities, sinks,
shower heads and more. Class size limited to 8.
BASIC LOCKSMITHING
(2 Sessions)
Mondays April 13, 2015 – April 20, 2015 * CLASS Time: 5:00 PM – 8:00 PM
This course is designed to teach you the basics of locks, electronic security,
keying, and door locks. Class size limited to 8.
Page 8
2015 Spring
Steel Center Classes
Location: Steel Center for Career & Technical Education
Construction/HVAC
4:30 PM - 8:30 PM - Unless otherwise noted
BASIC HOME WIRING
(4 Sessions)
Wednesdays January 21, 2015 – February 11, 2015 * Class Time: 5:00 PM –
9:00 PM * Instructor: Dave Hall
The ability to repair basic house wiring in your home is a skill you can
acquire. Knowing how circuits work and what can be done with them is
useful knowledge in the event of an outage, a storm, or other
emergency. The course will provide you with some basics to keep you
and your family safe. Class size limited to 8.
WATERPROOFING BASEMENTS
(4 Sessions)
Wednesdays March 4, 2015 – March 25, 2015 * Class Time: 5:00 PM – 9:00
PM * Instructor: Bob Bergamasco
Course will cover some basic principles along with common terms and current
technology. Concepts to cover will include Concrete Porosity, Water to Cement Ratio, Environmental
Hazards, as well as Ground Water and Hydrostatic Pressure. Class size limited to 8.
AIR CONDITIONING TUNE UP FOR BEGINNERS
(4 Sessions)
Wednesdays April 1, 2015 – April 22, 2015 * Class Time: 6:00 PM – 9:00 PM *
Instructor: TBA
Students will get hands-on experience refinishing furniture. Students can bring in a
small piece of furniture to be worked on or use furniture that will be available in class.
Students will learn how to perform minor repairs, touch-up spot refinishing, strip, stain and finish a piece of
furniture. Class size limited to 8.
Page 9
Mon Valley Works ICD
Steel Center Classes
Location: Steel Center for Career & Technical Education
Miscellaneouse Classes
4:30 PM - 8:30 PM - Unless otherwise noted
SIGN LANGUAGE - BEGINNER LEVEL
(6 Sessions)
Mondays March 9, 2015 – April 13, 2015 * Class Time: 4:30 PM – 7:30 PM *
Instructor: Deanna Baker
Students will be introduced to sign language. Topics covered include learning the alphabet, numbers, simple
words, expressions, and sentence creation. Class size limited to 8.
WOOD CARVING
(6 Sessions)
Mondays March 2, 2015 – April 6, 2015 * Class Time: 5:00 PM – 9:00 PM * Instructor:
Rodney Selders
Students will be introduced to basic and intermediate instruction on woodcarving as an
art form through the creation of hands-on-projects. Topics include selecting, sharpening, care and safe use
of carving knives and tools, selection of wood and proper technique for carving. Projects will develop
woodcarving skills using correct fundamentals in a safe and efficient manner. Class size limited to 8.
HOW TO START A BUSINESS
(4 Sessions)
Tuesdays, March 5, 2015 – March 26, 2015 * Class Time: 5:00 PM – 9:00 PM *
Instructor: Robin White
Are you one of those who dream of owning your own business? You’ll be your own
boss! In this class you will learn how to start your own business. Topics covered are:
Deciding on a Business, How to Write a Business Plan, Home-Based Businesses, Financing Your Vision, How to
Obtain Licenses and Permits, Determining Location for your Business and more. Class size limited to 10.
WRITE A WILL, LIVING WILL, AND POWER OF ATTORNEY
(1 Session)
Tuesdays, March 10, 2015 * Class Time: 5:00 PM – 9:00 PM * Instructor: Jeffrey
Golvash, Esquire
A will is the most practical first step in estate planning. It makes clear how you
want your property to be distributed after you die. Discuss how to write a will,
living will and power of attorney. Class size limited to 8.
CREDIT REPAIR AND FINANCIAL LITERACY
(4 Sessions)
Tuesdays, January 20, 2015 - February 10, 2015 * Class Time: 4:30 PM – 7:30 PM
Instructor: Melody Carter-Frye
Credit governs everyone’s lives. What used to be essential to buy a house or a car, is
now used to determine employment candidacy and make landlord/tenant decisions.
In this course, you will learn the 3 different credit agencies, how to dispute
inaccuracies, how scores are determined, and basics of retirement options, investing,
and financial literacy. Class size limited to 10.
Page 10
2015 Spring
Steel Center Classes
Location: Steel Center for Career & Technical Education
Miscellaneouse Classes
4:30 PM - 8:30 PM - Unless otherwise noted
INTRO TO REAL ESTATE
(4 Sessions)
Thursdays, April 9, 2015 – April 30, 2015 * Class Time: 4:30 PM – 8:30 PM
Instructor: Amie Cande
Are you one of those who dream of owning your own home? Or perhaps you would
like to begin investing in real estate in order to increase your income over time. In this
class you will learn the beginnings of what it takes to become a property owner for
residential interest, or financial interests. Flipping homes will be discussed along with need-to-know laws
and basics to property ownership, selling property and more. Class size limited to 8.
PUBLIC SPEAKING
(4 Sessions)
Thursday, March 12 2015 – April 2, 2015 * Class Time: 4:30 PM – 8:30 PM
Instructor: TBA
Introduction to the fundamentals of traditional public speaking strategies and
approaches. This course will cover the history of classical rhetorical theory and
highlights the importance of being able to speaking in front of groups, crowds, or individuals. Topics will
include controlling speech anxiety, how to structure and organize information to present to a variety of
audiences and physical and vocal delivery skills. Class size limited to 8.
Culinary Classes
Instructor: Chef Norm Domek
4:30 PM - 8:30 PM - Unless otherwise noted
HOW TO BOIL A LOBSTER
(1 Session)
Thursdays, March 5, 2015 * Class Time: 5:00 PM – 9:00 PM
This one-time course is being offered for students who are interested in
learning specific food preparation techniques and culinary strategy. This
course will cover pot size, best cooking practices, differences in tenderness and
color, and cooling to eat. Class size limited to 8.
SIMPLY COOKING
(4 Sessions)
Thursdays, March 12, 2015 – April 2, 2015 * Class Time: 5:00 PM – 9:00 PM
Homemade Cookies
3/12/15
Side Dishes/Salads
3/19/2015
Bar B Q Basics
3/26/2015
Thanksgiving/Christmas
4/2/2015
Simply Cooking explores in-depth methods of cooking for one specific area per week. This program is
suitable for students of all skill levels. Beginners in the kitchen will learn all the basics and come away with
the confidence to cook independently. Those with some experience will broaden their culinary knowledge,
hone their skills, and acquire valuable tips and insight so they can take their culinary ventures to a new level.
Class size limited to 8.
Page 11
Mon Valley Works ICD
Culinary Classes
Instructor: Chef Norm Domek
4:30 PM - 8:30 PM - Unless otherwise noted
SERVSAFE FOOD PROTECTION MANAGER CERTIFICATION
(4 SESSIONS)
Tuesdays & Thursdays, April 7, 2015 – April 16, 2015 * Class Time: 5:00 PM – 9:00 PM
The ServSafe Food Protection Manager Certification is a national industry certification that qualifies a worker
in a restaurant setting. The class covers the following:
•
Hazard Analysis & Critical
Control Points (HACCP)
•
Basic Food Safety
•
Personal Hygiene
•
Time & Temperature Control
•
Safe Food Preparation
•
Receiving and Storing Food
•
Methods of Thawing,
Cooking, Cooling and
Reheating Food
•
Cleaning & Sanitation
•
Food Safety Regulations
•
Preventing crosscontamination & Allergens
Students will need to successfully pass a written exam before receiving their certificate. Class size limited to
8.
Page 12
2015 Spring
Driving Directions to Mon Valley Works Training Hub
From
Clairton
•Turn right on Rt. 837 North and continue driving north.
•As you approach the Duquesne-McKeesport bridge, stay to
the right and continue driving under the bridge on Rt. 837
North.
•At the third traffic signal, make a right onto East Grant
Avenue crossing the railroad tracks into the RIDC City Center
of Duquesne (marked by a large blue sign).
•The first intersection is Linden Street. Make a right on
Linden and the first left turn into the HUB parking lot.
From
Irvin
Plant
•Take Philip Murray Road to Rt. 837 North.
•Make left turn on Rt. 837 North and continue driving north.
•As you approach the Duquesne-McKeesport bridge, stay to
the right and continue driving under the bridge on Rt. 837
North.
•At the third traffic signal, make a right onto East Grant
Avenue crossing the railroad tracks into the RIDC City Center
of Duquesne (marked by a large blue sign).
•The first intersection is Linden Street. Make a right on
Linden and the first left turn into the HUB parking lot.
From
Edgar
Thomson
•Turn right onto Braddock Ave through stops signs and
continue onto a four lane boulevard. At the 3 way stop sign,
make right onto East Pittsburgh/McKeesport Boulevard.
•East Pittsburgh/McKeesport Boulevard becomes Bowman
Avenue up the hill, through several traffic lights and down
bricked surfaces (about 3-4 miles).
•At "Y in the road", stay right onto the Duquesne Bridge and
continue on Rt. 837 North.
•At the fourth traffic signal, make a right onto East Grant
Avenue crossing the railroad tracks into the RIDC City Center
of Duquesne (marked by a large blue sign).
•The first intersection is Linden Street. Make a right on
Linden and the first left turn into the HUB parking lot.