View Catalogue - MRS Scientific

Ba
Accessories for Clifton Baths
Flask trays for NE5-28 and NE5-28D Shaking water baths
A perforated tray, complete with flask clips to suit common sizes of glass/polypropylene
Erlenmeyer flasks. The tray simply drops onto the reciprocating trolley and locates snugly.
Code
SFT0025
SFT0050
SFT0100
SFT0250
SFT0500
SFT1000
SFT2000
SFT9000
STT004
SBF01804
Description
39 x 25ml clip tray
32 x 50ml clip tray
18 x 100ml clip tray
12 x 250ml clip tray
8 x 500ml clip tray
5 x 1000ml clip tray
2 x 2000ml clip tray
Universal spring tray
T/T rack tray (holds4) see BW/85250 to BW/85258
Perforated tray only (for clips see below)
BW/85820
baths
Cat. No.
BW/85806
BW/85808
BW/85810
BW/85812
BW/85814
BW/85816
BW/85818
BW/85820
BW/85822
BW/85824
Flask tray for NE5-10D shaking water bath.
Cat. No.
BW/85878
Description
Perforated tray only (for clips see below)
Separate clips
For personalised clip arrangement, clips are supplied with all necessary fixings to enable
them to be attached to the perforated trays BW/85824 and BW/85878. It is possible to mix
and match a variety of clips sizes to suit different applications.
The clips are easy to assemble and remove from the perforated tray, their highly flexible and
elastic design allows glassware to be easily slid into the clip, and yet remain secure during
mixing or shaking.
There are no sharp edges to cut or score glassware and the clips can be autoclaved
Maximum quantity of any one size of clip:
Clip size
25ml
50ml
100ml
250ml
500ml
1000ml
2000ml
Microplate
Cat. No.
BW/85826
BW/85828
BW/85830
BW/85832
BW/85834
BW/85836
BW/85838
BW/85842
10 Litre tray
12
12
6
4
2
1
1
2
Code
FC0025
FC0050
FC0100
FC0250
FC0500
FC1000
FC2000
M11
28 Litre tray
39
32
18
12
8
5
2
4
BW/85828 in situ
Capacity of ask, ml
25
50
100
250
500
1000
2000
Microplate Clip
Immersion cooler (ambient to -20°C), for NE4 Series
This refrigeration cooler has no temperature controls as it is designed to be used in
conjunction with a stirred or circulated water bath where the coil is specially designed to
fit into rear access hole behind the stirrer into the bath without sacrificing the working area.
The cooler runs continuously with the bath providing temperature control.
Technical Specication
Model
DC1-300
Length of hose
Diameter cooling coil
Overall, dims mm
345w
445d
265h
Cooling capacity W
+10°C
800W
0°C
580W
- 10°C
400W
- 20°C
250W
Refrigerant
Voltage
Cat. No.
BW/85262
BW/85272
DC2-300
900mm
65mm
BW/85262
345w
465d
315h
1400W
1000W
700W
450W
R134a
230V
Code
DC1-300
DC2-300
Description
Immersion Dip Cooler
Immersion Dip Cooler
20
10
ºC
0
-10
-20
1
2
Hours
3
4
39