NAMRC43
Technical Program
Track 1: Manufacturing Systems
Session 1: Manufacturing Efficiency (Tues., 9:00 – 10:30, Audubon)
Session Chair(s): Chinedum Okwudire and Frank Pfefferkorn
Paper #
NAMRC43-64
Authors
H. Zhang, F. Zhao, J. Sutherland
Title
Manufacturing Scheduling of Collaborative
Factories for Energy Cost Reduction
NAMRC43-104
V. Townsend, J. Urbanic
A Case Study Measuring the Impact of a
Participatory Design Intervention on System
Complexity and Cycle Time in an Assemble-toOrder System
NAMRC43-116
S. Cheong, H. Jeong, S. Hwang, Accelerated Life Testing to Predict service Life
S. Hong, J. Domblesky, N. Kim
and Reliability for an Appliance Door Hinge
Session 2: Manufacturing Systems - Sustainability (Thurs., 1:30 – 3:00, Salon II)
Session Chair(s): Moneer Helu and Zhenhua Wu
NAMRC43-114
A. Pleta, D. Ulutan, L. Mears
NAMRC43-131
S. Mukherjee, A. Malshe, G.
Salamo
NAMRC43-54
J. Loizou, W. Tian, J. Robertson,
J. Camelio
P. Wang, R. Gao
An Investigation of Alternative Path Planning
Strategies for Machining of Nickel-Based
Superalloys
NAMRC43-127
H-M. Wang, S-P. Chang, P.
Using Balanced Scorecard for Sustainable
Williams, B. Koo, Y-R. Qu
Design-centered Manufacturing
NAMRC43-60
Q. Hatim
A Simulation Based Methodology of Assessing
Environmental Sustainability and Productivity
for Integrated Process and Production Plans
Session 3: Manufacturing Systems – Design for Manufacturing (Thurs., 3:30 – 5:00, Salon II)
Session Chair(s): Steve Wang and James Kong
Energy Demand Analysis of Photovoltaic Device
– Material and Nanomanufacturing Process
Discovery
NAMRC43-28
A. Das, P. Franciosa, D.
Fixture Design Optimisation Considering
Ceglarek
Production Batch of Compliant Non-Ideal Sheet
Metal Parts
NAMRC43-75
M. Helu, T. Hedberg
Enabling Smart Manufacturing Research and
Development using a Product Lifecycle Test Bed
Session 4: Manufacturing Systems – Modeling (Thurs., 1:30 – 3:00, Salon IV)
Session Chair(s): James Kong and Dazhong Wu
NAMRC43-101
NAMRC43-39
S M. Givechi, A. Haghighi, L.
Wang
Automated Wear Characterization for Broaching
Tools Based on Machine Vision Systems
Enhanced Particle Filtering for Parameter
Estimation
Generic Machining Process Sequencing Through
a Revised Enriched Machining Feature Concept
Session 5: Manufacturing Systems – Controls (Thurs., 8:30 – 10:00, Audubon)
Session Chair(s): Robert Gao and Barney Klemecki
NAMRC43-107
NAMRC43-48
C. DiMarco, J. Ziegert, C.
Vermillion
A. Bharathi, J. Dong
NAMRC43-15
W. Li, H. Dai, D. Zhang
Exponential and Sigmoid-Interpolated
Machining Strategies
A Smooth Trajectory Generation Algorithm for
Addressing Higher-Order Dynamic Constraints in
Nanopositioning Systems
The Relationship between Maximum
Completion Time and Total Completion Time in
Flowshop Production
Track 2: Manufacturing Processes
Session 1: Machining Dynamics I (Tues., 9:00 – 10:30, Walden)
Session Chair(s): Hitomi Yamaguchi and Bruce Tai
Paper #
NAMRC43-6
Authors
T. Schmitz
Title
Effect of retention knob geometry on machining
dynamics
NAMRC43-80
J. Deng, L. Zhang, J. Dong, P.
AFM-based 3D Nanofabrication using Ultrasonic
Cohen
Vibration Assisted Nanomachining
NAMRC43-63
K. Singh, R. Singh, V. Kartik
Comparative Study of Chatter Detection
Methods for High-Speed Micromilling of Ti6Al4V
Session 2: Machining Dynamics II (Tues., 11:00 – 12:30, Walden)
Session Chair(s): Jaydeep Karandikar and Patrick Kwon
NAMRC43-99
C. Cheng, Z. Wang, W. Hung, S.
Bukkapatnam, R. Komanduri
C. Schmitt, S. Klein, D. Bahre
NAMRC43-36
T. Sugihara, T. Enomoto
NAMRC43-88
K. Trapp, L. Kaefer, D. Baehre
NAMRC43-130
A. Davoudinejad, E. Chiappini,
S. Tirelli, M. Annoni, M. Strano
Ultra-Precision Machining Process Dynamics and
Surface Quality Monitoring
NAMRC43-73
An introduction to the vibration analysis for the
precision honing of bores
NAMRC43-7
T. Schmitz, A. Honeycutt
The extended milling bifurcation diagram
Session 3: Cutting Tools and Mechanics II (Tues., 9:00 – 10:30, Burnham)
Session Chair(s): Yuebin Guo and Scott Miller
High Speed Machining of Inconel 718 Focusing
on wear behavior of CBN Tool
NAMRC43-42
R. Goncalves, M. da Silva
Influence of Copper Content on 6351 Aluminum
Alloy Machinability
NAMRC43-82
P. Kolar, P. Fotju, T. Schmitz
On cutting force coefficient model with respect
to tool geometry and tool wear
Session 4: Cutting Tools and Mechanics III (Tues., 11:00 – 12:30, Burnham)
Session Chair(s): Livan Fratini and Petr Kolar
Effects of machining ferromagnetic materials on
magnetic property changes
FE simulation and validation of chip formation
and cutting forces in dry and cryogenic cutting
of Ti–6Al–4V
NAMRC43-108
D. Ulutan, A. Pleta, A.
Henderson, L. Mears
Session 5: Forming I (Weds., 1:30 – 3:00, Keynes)
Session Chair(s): Durul Ulutan and Jyhwen Wang
Comparison and Cost Optimization of Solid Tool
Life in End Milling Nickel-Based Superalloy
NAMRC43-46
NAMRC43-70
M. Ramezani, S. Schmid
E. Simenotto, S.Bruschi, A.
Ghiotti, E. Savio
NAMRC43-85
A. Nassari, C. Campbell, G.
Chini, B. Kinsey
Bio-based Lubricants for Forming of Magnesium
Prediction of distortions in hot forged
martensitic stainless steel turbine blades by
numerical simulation
Analytical Model and Experimental Validation of
Single Turn, Axi-Symmetric Coil for
Electromagnetic Forming and Welding
Session 6: Forming II (Weds., 3:30 – 5:00, Keynes)
Session Chair(s): Wayne Cai and Steve Schmid
NAMRC43-113
Y. Zhang, M. Dhaigude, J. Wang
The Anvil Effect in the Spherical Indentation
Testing on Sheet Metals
NAMRC43-84
T. Bakhtiani, H. El-Mounayri, J.
Modeling and simulating of extrusion process of
Zhang
a condenser tube for optimizing the mandrel
geometry
NAMRC43-129
H. Heinzel, M. Ramezani, T.
Experimental investigation of the formability of
Neitzert
organic coated steel sheet metal
Session 7: Abrasive Machining (Weds., 1:30 – 3:00, Burnham)
Session Chair(s): Barbara Linke and John Patten
NAMRC43-21
W. Grzesik, J. Rech, K. Zak
NAMRC43-94
Y. Alammari, M. Sanati, T.
Freiheit, S. Park
H. Yagashita, J. Osawa
NAMRC43-49
B. Linke, P. Harris, M. Zhang
NAMRC43-98
J. Correa, P. Ferreira
High-Precision Finishing Hard Steel Surfaces
Using Cutting, Abrasive and Burnishing
Operations
NAMRC43-125
Y. Zheng, B. Belmont, A. Shih
Experimental Investigation of the Grinding
Wheel Dynamics in Atherectomy
NAMRC43-90
D. Sun, M. Sealy, Z. Liu, C. Fu, Y. Finite Element Analysis of Machining Damage in
Guo, F. Fang, B. Zhang
Single-Grit Grinding of Ceramic Knee Implants
Session 8: Manufacturing Machines I (Thurs., 1:30 – 3:00, Salon I)
Session Chair(s): Matthew Davies and Placid Ferreira
Investigation of Boring Bar Dynamics for Chatter
Suppression
NAMRC43-52
Hole Making Machine based on Double
Eccentric Mechanism for CFRP/TiAl6V4 Stacks
NAMRC43-74
M. Law, H. Rentzsch, S.
Development of a Dynamic Substructuring
Ihlenfeldt
Framework to Facilitate in Situ Machining
Solutions Using Mobile Machine Tools
Session 9: Manufacturing Machines II (Thurs., 3:30 – 5:00, Salon I)
Session Chair(s): Tony Schmitz and Brian Paul
Development of Desktop Multipurpose Grinding
Machine for Educational Purposes
Analysis and design for rapid prototyping
mechanism using hybrid flexural pivots
NAMRC43-118
B. Lahevardi, I. Garretson, B.
Paul, K. Haapala
Manufacturing Energy Analysis of a
Microchannel Heat Exchanger for High-Density
Servers
Session 10: Joining and Assembly I (Thurs., 8:30 – 10:00, Salon IV)
Session Chair(s): Ali Nassiri and Brad Kinsey
NAMRC43-33
X. Wu, T. Liu, W. Cai
NAMRC43-45
G. Buffa, D. Campanelli, A.
Ducato, M. Cammalleri, L.
Fratini, A. Astarita, A. Squillace,
S. Esposito
D. Bian, T. Bucher, H. Tan, Y.
Yao
M. Hutyala, A. Javadi, J. Zhao,
T. Lin, W. Tang, X. Li
Microstructure, Welding Mechanism, And
Failure Of Al/Cu Ultrasonic Welds
NAMRC43-66
A. Shrivastava, M. Zinn, N.
Analysis of Force Transients during Friction Stir
Duffie, N. Ferrier, F. Pfefferkorn Welding
NAMRC43-41
V. Chauhan, B. Surgenor
A Comparative Study of Machine Vision Based
Methods for Fault Detection in an Automated
Assembly Machine
Session 11: Joining and Assembly II (Thurs., 10:30 – 12:00, Salon IV)
Session Chair(s): Roland Chen and Wayne Cai
(moved to Tues
at 2:00 PM
Lakeview)
NAMRC43-123
Experimental and numerical analysis of
microstructure evolution during Linear Friction
Welding of Ti6Al4V titanium alloys
Effect of Deep Penetration of Interleaf on
Delamination Resistance in GFRP
NAMRC43-17
Scalable Platform for Batch Fabrication
Micro/Nano Devices on Engineering Substrates
of Arbitrary Shapes and Sizes
Session 12: Non-Traditional Manufacturing Processes I (Thurs., 1:30 – 3:00, Welwyn)
Session Chair(s): Jason Moore and Shuting Lei
NAMRC43-68
P. Prakasam, S. Castagne, S.
Mechanism of Surface Evolution in Vibratory
Subbiah
Media Finishing
NAMRC43-119
H. Mohammadi, D. Ravindra, S. Experimental Work on Micro Laser-Assisted
Kode, J. Patten
Diamond Turning of Silicon (111)
Session 13: Micro-Manufacturing (Thurs., 3:30 – 5:00, Welwyn)
Session Chair(s): Shreyes Melkote and Chandra Nath
NAMRC43-100
Y. Zhang, L. Wu, H. ElMounayri, J. Zhang
B. Jayasena, S. Melkote
Molecular Dynamics Study of the Strength of
Laser Sintered Nanoparticles
NAMRC43-87
A Preliminary Investigation of PDMS Stamp
Assisted Mechanical Exfoliation of Large Area
Graphene
NAMRC43-65
Z. Kong, P. Rao
Quantification of Ultraprecision Surface
Morphology using an Algebraic Graph Theoretic
Approach
Session 14: Driling and Turning (Thurs., 8:30 – 10:00, Keynes)
Session Chair(s): Bruce Tai and Marko Kirschner
NAMRC43-11
D. Biermann, M. Kirschner
Experimental Investigations on Single-Lip Deep
Hole Drilling of Superalloy Inconel 718 with
Small Diameters
NAMRC43-112
NAMRC43-18
A. Chaudhari, M.
Sankaranarayanasamy
G. Zhang, C. Guo
The Effects of Pilot Hole Geometry on Tool-Work
Engagement Efficacy in Deep Hole Drilling
Modeling of Cutting Force Distribution on Tool
Edge in Turning Process
Session 15: Milling I (Thurs., 10:30 – 12:00, Keynes)
Session Chair(s): Larry Yao and David Stephenson
NAMRC43-91
Z.Y. Liu, M. Sealy, Y. Guo, Z.Q.
Liu
NAMRC43-79
T. Komatsu, Y. Musha, T.
Yoshino, T. Matsumura
NAMRC43-95
H. Onozuka, K. Utsumi, I. Knon,
J. Harai, Y. Numata, T. Obikawa
Session 16: Milling II (Thurs., 1:30 – 3:00, Keynes)
Session Chair(s): Laine Mears and John Agapiou
Energy Consumption Characteristics in Finish
Hard Milling of Tool Steels
Surface Finish and Affected Layer in Milling of
Fine Crystal Grained Stainless Steel
High Speed Milling Processes with Long Oblique
Cutting Edges
NAMRC43-132
C. Nath, Z. Brooks, T. Kurfess
On Machinability Study and Process
Optimization in Face Milling of Some Alloys with
Indexable Mill Inserts
NAMRC43-102
O. Yousefian, J. Tarbutton
Prediction of Cutting Force in 3-Axis CNC Milling
Machines Based on Voxelization Framework for
Digital Manufacturing
NAMRC43-37
K. Zou, Y. Wan, Y. Cai, X. Liang,
Burr Controlling in Micro Milling with Supporting
Z Liu
Material Method
Session 17: Cutting Tools and Mechanics I (Thurs., 3:30 – 5:00, Keynes)
Session Chair(s): Tatsuya Sugihara and Bryan Dods
NAMRC43-26
J. Yu, G. Wang, Y. Rong
NAMRC43-106
S. Pananaskar, S. Pande, Y.
Kwon, A. Sheffer, S. McMains,
Z. Hu
E. Korkmaz, B. Gozen, B. Bediz,
B. Ozdoganlar
Energy-efficient vector field based toolpaths for
CNC pocket machining
S M. Mutyala, J. Zhao, T. Lin, X.
Li
Study on Materials and Fabrication of Functional
Thin Film AlN Force Sensors
Experimental Study on the Surface Integrity and
Chip Formation in the Micro Cutting Process
NAMRC43-35
J. Sheikh-Ahmad,
Effect of Cutting Edge Geometry on Thermal
Stresses and Failure of Diamond Coated Tools
P. Chipalkatti
NAMRC43-55
F. Niaki, D. Ulutan, L. Mears
In-Process Tool Flank Wear Estimation in
Machining Gamma-Prime Strengthened Alloys
Using Kalman Filter
Session 18: Path Planning (Thurs., 10:30 – 12:00, Audubon)
Session Chair(s): Sara McMains and Scott Miller
NAMRC43-111
High-Frequency Compensation of Dynamic
Distortions in Micromachining Force
Measurements
NAMRC43-13
L. Berglind, J. Ziegert
Modulated Tool Path (MTP) Machining for
Threading Applications
Session 19: Non-Traditional Manufacturing Processes II (Thurs., 1:30 – 3:00, Olmstead)
Session Chair(s): Jason Moore and Shuting Lei
NAMRC43-16
NAMRC43-32
A. Kamaraj, V. Shaw, M.
Sundaram
Novel Fabrication of Un-Coated SuperHydrophobic Aluminum via Pulsed
Electrochemical Surface Modification
NAMRC43-56
X. Yu, J. Ma, S. Lei
Femtosecond Laser Scribing of Mo Thin Film on
Flexible Substrate Using Axicon Focused Beam
Session 20: Non-Traditional Manufacturing Processes III (Thurs., 3:30 – 5:00, Olmstead)
Session Chair(s): Hazim El-Mounayri and YB Guo
NAMRC43-67
NAMRC43-86
Q. Wang, J. Morrow, N. Duffie,
F. Pfefferkorn
J. Liu, Y. Guo
NAMRC43-89
C. Fu, M. Sealy, Y. Guo, X. Wei
Surface Prediction Model for Thermocapillary
Regime Pulsed Laser Micro Polishing of Metals
Process Capability of Wire-EDM of Nitinol at
Main Cut and Trim Cut Modes
Finite Element Simulation and Experimental
Validation of Pulsed Laser Cutting Nitinol
Track 3: Additive Manufacturing
Session 1: Novel Additive Processes (Tues., 9:00 – 10:30, Salon IV)
Session Chair(s): Yong Huang and Yayue Pan
Paper #
NAMRC43-10
NAMRC43-124
Authors
J. Sun
R. Xiong, Z. Zhang, Y. Huang
Title
3D Printing for Customized Food Fabrication
Identification of Optimal Printing Conditions for
Laser Printing of Alginate Tubular Constructs
NAMRC43-96
S. Das, D. Cormier, S. Williams
Multi-Functional Additive Manufacturing Using
Pulsed Photonic Sintering
Session 2: Design for Additive Manufacturing (Tues., 11:00 – 12:30, Salon IV)
Session Chair(s): Yong Chen and Chi Zhou
Geometric Approaches to Input File Modification
for Part Quality Improvement in Additive
Manufacturing
NAMRC43-51
S. Yang, Y. Tang, Y. Zhao
A new part consolidation method to embrace
the design freedom of additive manufacturing
NAMRC43-122
T. Wu, S. Jahan, P. Kumar, A.
A Framework for Optimizing the Design of
Tovar, H. El-Mounayri, J. Zhang, Injection Molds with Conformal Cooling for
D. Acheson, R. Nalim, K. Brand
Additive Manufacturing
Session 3: Quality in Additive Manufacturing (Tues., 2:00 – 1330, Salon IV)
Session Chair(s): John Obielodan and Roland Chen
NAMRC43-109
W. Zha, S. Anand
NAMRC43-43
W. Land, B. Zhang, J. Ziegert, A.
Davies
C. Li, C. Fu, Y.B. Guo
NAMRC43-93
NAMRC43-92
P. Das, R. Chandran, R. Samant,
S. Anand
In-Situ Metrology System for Laser Powder Bed
Fusion Additive Process
Fast Prediction and Validation of Part Distortion
in Selective Laser Melting
Optimum Part Build Orientation in AM for
Minimizing Part Errors and Support Structures
Session 4: Additive Manufacturing Materials (Weds., 8:30 – 10:00, Walden)
Session Chair(s): Jingyan Dong and Meisam Salahshoor
NAMRC43-78
Y. Zhou, Y. Tang, T. Hoff, M.
Garon, F. Zhao
The Verification of the Mechanical Properties of
Binder Jetting Manufactured Parts by
Instrumented Indentation Testing
NAMRC43-121
X. Song, Y. Chen, T. Lee, S. Wu, Ceramic Fabrication Using Mask-ImageL. Cheng
Projection-based Stereolithography Integrated
with Tape-casting
NAMRC43-103
A. Habib, N. Ahsan, B. Khoda
Optimizing material deposition direction for
functional internal architecture in additive
manufacturing processes
Session 5: Metal Additive Manufacturing I (Thurs., 10:30 – 12:00, Walden)
Session Chair(s): Murali Sundaram and Bahir Khoda
NAMRC43-27
J. Romano, L. Ladani, M.
Sadowski
NAMRC43-44
P. Kattire, S. Paul, R. Singh, W.
Yan, R. Singh
NAMRC43-50
Y. Han, C. Wei, J. Dong
NAMRC43-59
A. Brant, M. Sundaram
NAMRC43-14
C. Lee, J. Tarbutton
Modeling of Temperature Distribution and Melt
Geometry in DMLS Processes – A Comparison
among Common Materials
NAMRC43-8
M. Doyle, K. Agrawal, W. Sealy, Effect of Layer Thickness and Orientation on
K. Schull
Mechanical Behavior of Binder Jet Stainless Steel
420 + Bronze Parts
NAMRC43-117
T. Do, C. Shin, P. Kwon
Improving Structural Integrity with Boron-Based
Additives for 3D printed 420 Stainless Steel
Session 6: Metal Additive Manufacturing II (Thurs., 1:30 – 3:00, Walden)
Session Chair(s): Prahalad Rao and James Yang
Experimental Characterization of Laser Cladding
of CPM 9V on H13 Tool Steel for Die Repair
Applications
NAMRC43-128
G. Manogharan, R. Wysk, O.
AIMS- a Metal Additive-Hybrid Manufacturing
Harrysson, R. Aman
System: System Architecture and Attributes
NAMRC43-25
X. Wang, X. Gong, K. Chou
Scanning Speed Effect on Mechanical Properties
of Ti- 6Al-4V Alloy Processed by Electron Beam
Additive Manufacturing
Session 7: Novel Additive Processes II (Thurs., 3:30 – 5:00, Walden)
Session Chair(s): Denis Cormier and Bashir Khoda
Droplet Formation and Settlement of PhaseChange Ink in High Resolution
Electrohydrodynamic (EHD) 3D Printing
A Novel System for Cloud-Based Micro Additive
Manufacturing of Metal Structures
Electric poling-assisted additive manufacturing
process for lead-free piezoelectric device
fabrication
Track 4: Cyber-Physical Systems in Manufacturing
Session 1: Cyber-Physical Systems in Manufacturing I (Weds., 8:30 – 10:00, Salon II)
Session Chair(s): Wei (Mike) Li and Prahalad Rao
Paper #
NAMRC43-126
Authors
Title
L. Wang, M. Torngren, M. Onori TRACK KEYNOTE - Current Status and
Advancement of Cyber Physical Systems in
Manufacturing
NAMRC43-47
M. Hutchins, R. Bhinge, M.
Framework for Identifying Cybersecurity Risks in
Micali, S. Robinson, J.
Manufacturing
Sutherland, D. Dornfeld
NAMRC43-57
H. Vincent, L. Wells, P.
Trojan Detection and Side-Channel Analyses for
Taragaza, J. Camelio
Cyber-Security in Cyber-Physical Manufacturing
Systems
Session 2: Cyber-Physical Systems in Manufacturing II (Weds., 3:30 – 5:00, Salon II)
Session Chair(s): Zhenhua Wu and Xi Wang
NAMRC43-81
NAMRC43-29
NAMRC43-71
M. Givechi, A. Haghighi, L.
Wang
D. Wu, J. Terpenny, W.
Gentzsch
A. Syberfelt, O. Danielsson, M.
Holm, L. Wang
Generic Machining Process Sequencing Through
a Revised Enriched Machining Feature Concept
Cloud-based Design, Engineering Analysis and
Manufacturing: A Cost-Benefit Analysis
Visual Assembly Guidance Using Augmented
Reality
Track 5: Robert J. Hocken Honorary Symposium
Session 1: Hocken Symposium I (Tues., 9:00 – 10:30, Salon I)
Session Chair(s): John Ziegert
Paper #
NAMRC43
Authors
R. Wilhelm
Title
Building Precision Metrology at UNC Charlotte
and Across the Globe
NAMRC43-40
J. Mayr, M. Egeter, S. Weikert,
Thermal Error Compensation of Rotary Axes and
K. Wegener
Main Spindles using Cooling Power as Input
Parameter
NAMRC43-23
J. Gie, J. Agapiou, S. Kurgin
CNC Machine Tool Work Offset Error
Compensation Method
Session 2: Hocken Symposium II (Tues., 11:00 – 12:30, Salon I)
Session Chair(s): Scott Smith
NAMRC43
D. Lucca
NAMRC43-34
H.S. Park, U. Tuladhar, C. Shah
NAMRC43-53
S. Pande, P. Biradar
"Nanocut" and the Mechanics of Nanometric
Cutting
Development of an Inspection System for Micro
Level Roughness Detection
Efficient algorithms for automated inspection of
freeform surfaces
Session 3: Hocken Symposium III (Tues., 2:00 – 3:30, Salon I)
Session Chair(s): Tony Schmitz
NAMRC43
H. Kunzmann
NAMRC43-38
B. Muralakrishnan, M. Shilling,
P. Rachakonda, W. Ren, V. Lee,
D. Sawyer
NAMRC43-110
C. Dang, C. Bui, J. Hwang
Measure what is measureable, make
measureable what is not: Contributions of Bob
Hocken to realize this requirement
Towards the development of a documentary
standard for derived-point to derived-point
distance performance evaluation of 3D imaging
systems
Volumetric error model for multi-axis machine
tools
In order to maintain topical coherence and prevent single paper sessions, the following two NAMRC
papers are being presented in MSEC sessions.
Session 2: Equipment Design & Tooling to Enhance Manufacturing Processes (Thurs., 3:30 – 5:00,
Salon IV)
Session Chair(s): Chair: Johnson Samuel, Rensselaer Polytechnic Institute
NAMRC43-31
Paul Anderson, JohnZiegert
Subscale Machining of Large Components
Session 3: Advance in Manufacturing of Polymers and Composites (Tues., 2:00 – 3:30, Lakeview)
Session Chair(s): Chair: Felicia Stan, Dunarea de Jos University of Galati
NAMRC43-62
W. Li, B. Belmont, A. Shih
Design and Manufacture of Polyvinyl Chloride
(PVC) Tissue Mimicking Material for Needle
Insertion
NAMRC Panel Discussions
Panel 1: Government Support of Manufacturing Research – Current Status and Future Trends
(Weds., 10:30 – 12:00, Salon II)
Session Chair(s): Scott Smith - UNCC
Participant
Affiliation
Dr. Pramod Khargonekar NSF – Assistant Director for Engineering
Dr. Frank Gayle
NIST – Deputy Director Advanced Manufacturing National Program Office
Dr. Mark Johnson
DOE – Director Advanced Manufacturing Office
Ms. Adele Ratcliffe
DoD – Director Manufacturing Technology
Panel 2: Manufacturing Education, Workforce Development, and Outreach
(Thurs. 10:30 – 12:00 AM, Salon I)
Session Chair(s): Bryan Dods - GE
Mr. Mark Pringle
Dr. Keith Miller
Dr. Steven Liang
Mr. Michael Realon
Siemens Energy – Director of Operations, Charlotte Energy Hub
Greenville Technical College - President
Georgia Tech – Morris M. Bryan Professor of Advanced Manufacturing
Olympic Community of Schools