1. No category

bafM;k ;quk;VsM feYl] ua- 5
India United Mills No. 5
A unit of NTC Ltd. (Western Region), A Govt of India Undertaking
A G Pawar Lane, Byculla (East), Mumbai 400 027 : Tel No. Direct -: 23730595 (fax), PABX-: 23713566 /68
Email -: indu.05hotmail.com / Website: www.ntcltd.co.in
Ref: 5/Job/2015
Date: 02.05.2015
Indent No.5/Job/Eng/02
Date: 18.04.2015
To
M/s ____________________________
________________________________
________________________________
________________________________
________________________________
Sub: General civil Job work on Labour charges basis.
for carrying out petty Misc civil work at mill premises
for the period of May 2015 to Oct. 2015
Dear Sir,
Enclosed please find here with a tender document with Terms & Condition.
You are requested to submit your offer complete in all respect in a sealed envelop
Positively on or before due date i.e. 15 .05.2015.
Thanking You
Yours faithfully
Joint Manager (Material)
bafM;k ;quk;VsM feYl] ua- 5
India United Mills No. 5
A unit of NTC Ltd. (Western Region), A Govt of India Undertaking
A G Pawar Lane, Byculla (East), Mumbai 400 027 : Tel No. Direct -: 23730595 (fax), PABX-: 23713566 /68
Email -: indu.05hotmail.com / Website: www.ntcltdwr.co.in
ANNEXURE “A”
Sub: General civil Job work on Labour charges basis.
for carrying out petty Misc civil work at mill premises
for the period of May 2015 to Oct. 2015
Sr.
No.
1
2
3
4
5
6
7
8
9
10
Nature of work
Unit
Labour
charges /Unit (Rs.)
Existing Plaster breaking & new plastering 1: 4 mortal & Sq, ft,/Brass
finishing plaster thickness 20 mm or match finish with existing
plaster.
Construction of new brick wall.9”to 14” .
Sq, ft,/Brass
Construction of dobber wall 14” x 18”
Sq. ft./Brass
Only new plastering with 1.4 mortal finishing plaster thickness Sq. ft./Brass
20mm
To be making & constructing water proof mortal 1:4 , 8” thick
Running
watta at the junction of A.C cement sheet & wall along to the
Meter
Peripheri of wall.
To plastering RCC Slab /Piller prior to that, the corrosive steel
Sq. ft.
to be clean and apply the anti rsusting liquid treatment.
To demolition of existing RCC slab, Piller and remove the
Cubic ft.
debris, then dump at provided area.
To fixing of Kota Ladi ( on the cement mortal 1: 4 including Per Sq. Ft.
making Kota Ladi in line and level
Polishing of Led Kota Ladi for finish with two coat.
Per Sq. Ft.
To fixing of Ceramic tiles on wall, floor area in line and level
Per Sq. Ft
The all above 1 to 10 items are purely on labour charges basis .
All required material will be provided by the mill.
Rate to be quoted along with scaffolding for all items
Yours faithfully
Joint Manager (Material)
bafM;k ;quk;VsM feYl] ua- 5
India United Mills No. 5
A unit of NTC Ltd. (Western Region), A Govt of India Undertaking
A G Pawar Lane, Byculla (East), Mumbai 400 027 : Tel No. Direct -: 23730595 (fax), PABX-: 23713566 /68
Email -: indu.05hotmail.com / Website: www.ntcltdwr.co.in
ANNEXURE “B”
TERMS & CONDITIONS:
1) You will have to use own tools and gadgets required for the job and scaffolding if
required.
2) Rate to be quoted on Labour charges basis. All other required material will be
provided by mill.
3) All statutory Rules ESIC/PF/IT/ Service Tax are applicable you will have to drawn
Insurance, policy under workmen compensation act cover your workmen for
accident/injury while carrying/out work in Mills you will be solely responsible as
well liable for any accident/injury to your workers.
4) Job to be done without damaging Mills property. In case of damage it will be
recovered from you if contract is entrusted with you.
5) You will have to make enter the name of your employees in Mill gate Register
regularly during the period of work.
6) You will have to make entries of all materials brought by you for the job work in
gates entry Register. Material brought to be offered to the Inspection of Mill
Engineer and after his approval it is to be used.
7) Payment:
a. 100% payment will be made on satisfactory completion of work.
8) At every stage of work you should report Mill’s Engineer.
Yours faithfully
Joint Manager (Material)