PUNTO
Punto 92mm Comms
GENERAL INFORMATION
Choose any combination
of the three interface
options as shown
below:
PERIPHERAL OPTIONS
HDMI
RCA
Data
HDMI
Audio/Mic
CH
SMART CHARGING USB
The smart, dual port USB
charger that can detect
connected Apple®, Android®
and Windows® mobile
devices whilst providing fast
charging. It supports sleep
mode charging for most
Apple® products and is
compatible with USB 2.0 and
3.0 portable devices. A
maximum overall current of
2.1A is available for the dual
USB ports.*
NLY
GO
GIN
R
A
HD
MI
CABLE PULL THROUGH
A neat interface that allows
cable extensions to be stored
on the work surface for easy
access.
LOCKING CAP
By using a coin, twist and
unlock the locking cap to
install cables in the
pull-through interface.
128.5
102
2
Eliminate big and
bulky desk
surface data
connector units,
install the Punto
92mm Comms
module.
USB
AESTHETICS
The Punto units are available
in black, grey or white.
G ONLY
GIN
AR
H
C
WORK SURFACE
ULTRA SLIM
119
The Punto sits virtually flush
with the desk surface and
uses minimal space.
LOCKING RING
The ring secures the unit
firmly in position and also
allows for easy removal
when retrofitting or
relocation.
LARGE BOLT THREAD
CHA
RG
I
N
G
O
LY
N
The desk collar has been
engineered for strength with
an easy-to-screw thread to
aid in quick and easy
installation of the unit.
92mm
(Cut-out Size 93mm )
*
Please note that Power Logic in no way endorses these brands. Apple®,
Android® and Windows® are Proprietary Trademarks of Apple®, Google®
and Microsoft® respectively.
All measurements are in millimeters unless otherwise indicated
© 2015 Copyright Powerlogic SA (Pty) Ltd. All Rights Reserved. Due to continual product improvements and
upgrades, Power Logic reserves the right to amend and change products as it sees fit. As such, images of
products are for indicative purposes only and actual products may vary from those depicted and certain
options may be unavailable. Always check with your distributor or with Power Logic regarding availability of the
product of your choice.
PUNTO
Punto 92mm Comms
INSTALLATION & OPERATION
INSTALLATION
50mm
G
LY
ON
CHAR
GIN
CHAR
GIN
EDGE OF WORK SURFACE
G
LY
ON
CUT-OUT
WORK SURFACE
STEP 1
Make a cut-out in a predetermined location with a
diameter of 80mm. Ensure
there is sufficient clearance;
150mm below the work
surface and at least 50mm
between the cut-out edge
and the edge of the work
surface. Ensure the cable can
reach the power outlet with
ease.
STEP 2
Remove the locking collar by
twisting it off in a clockwise
direction (when viewed from
above). Do not connect the
unit to power until the
installation has been
completed.
STEP 3
Drop the unit, cable first, into
the precut mounting hole and
position the unit in the
preferred orientation.
STEP 4
Once the unit is positioned in
the mounting hole, proceed
to attach the locking ring by
twisting it on in a clockwise
direction (when viewed from
below) until tightly fastened.
Be sure to keep the unit in the
desired orientation while
fastening.
DATA & CABLE INSTALLATION
Coin
Cable
Inserts
CHARGING ONLY
CHARGING ONLY
CHARGING ONLY
CHARGING ONLY
Key
STEP 1
Insert a coin in the slot found in
the center of the unit. Rotate the
key in an anti-clockwise
manner until it disengages.
DIMENSIONS:
Mounting Hole Diameter:
STEP 2
Remove the key to free the
interchangeable inserts.
Remove the desired insert.
93mm (Approx. 3-5/8 in.)
ELECTRICAL (SMART CHARGER):
Input:
USB Output:
110V - 240V AC, 100mA (Max)
5V DC, 2.1A (Max) Total
WORK SURFACE THICKNESS:
10mm - 50mm (Approx. 2/5 in. - 2 in.)
MAINTENANCE AND CARE:
Ensure unit is disconnected prior to cleaning.
Clean the unit with a damp cloth and dry immediately.
Do not use harsh chemical solvents.
STEP 3
Install data connectors or
cable pull through from
below and place the insert
back in postion.
PLEASE NOTE:
All products carry a 12
month limited warranty
which excludes normal
wear and tear and product abuse. In the event of
product tampering, the
warranty will be void.
© 2015 Copyright Powerlogic SA (Pty) Ltd. All Rights Reserved. Due to continual product improvements and
upgrades, Power Logic reserves the right to amend and change products as it sees fit. As such, images of
products are for indicative purposes only and actual products may vary from those depicted and certain
options may be unavailable. Always check with your distributor or with Power Logic regarding availability of the
product of your choice.
STEP 4
Replace the key and fasten it
again in a clockwise direction
with a coin.
!
WARNING
!
For indoor use only
If any malfunction occurs, do not attempt
to repair
Return product to manufacturer for repair
Do not insert foreign objects into data
outlets
For counter top mounting
For other options, contact your distributor