Download Report

PUNTO
Punto 92mm Power
GENERAL INFORMATION
SMART CHARGING USB
O
LY
N
POWER OUTLET
ORIENTATION
Sockets are pre-fitted at
either 45º or 315º. See
reverse for details.
PERIPHERAL OPTIONS
Cat 6
RCA
USB
HDMI
CHA
RG
IN
G
A smart, dual port USB charger that can
detect connected Apple®, Android® and
Windows® mobile devices whilst
providing fast charging. It supports sleep
mode charging for most Apple® products
and is compatible with USB 2.0 and 3.0
portable devices. A maximum, overall
current of 2.1A is available for the dual
USB ports.*
Data HDMI
Audio/Mic
Select any two keystone peripherals
128.5
ARGING ONLY
CH
POWER OUTLETS
Choose from 24 international
power outlets available in
black, grey and white.
Optional colours also
available. Contact your
closest distributor or visit
www.powerlogic.net.
CHROME EFFECT BEZEL
The unit is fitted with a Chrome
Bezel for a neat, stylish finish.
AESTHETICS
The Punto units are available
in black, grey or white
2
Eliminate big, bulky desk
surface power outlets and data
connectors with the compact,
elegant Punto 92mm Power
module.
ULTRA SLIM
IN
G
O
N
LY
Almost flush with the desk
surface, this product uses
minimal space and does so
incredibly efficiently.
77
CHA
RG
LOCKING RING
Secures the unit firmly in
position, but also allows for
easy removal for retrofitting
or relocation.
CHA
RG
IN
G
O
LY
N
The desk collar has been
engineered for strength with
an easy-to-screw thread
which aids in quick and easy
installation of the unit.
INTEGRAL
CABLE STRAIN RELIEF
Installed as a standard, this
simple strain relief greatly
reduces the stresses on
cables exiting the unit,
resulting in a longer life span.
All measurements are in millimeters unless otherwise indicated
© 2015 Copyright Powerlogic SA (Pty) Ltd. All Rights Reserved. Due to continual product improvements and
upgrades, Power Logic reserves the right to amend and change products as it sees fit. As such, images of
products are for indicative purposes only and actual products may vary from those depicted and certain
options may be unavailable. Always check with your distributor or with Power Logic regarding availability of the
product of your choice.
30.9
LARGE BOLT THREAD
92mm
(Cut-out Size 93mm )
*
Please note that Power Logic in no way
endorses these brands. Apple®,
Android® and Windows® are
Proprietary Trademarks of Apple®,
Google® and Microsoft® respectively.
PUNTO
Punto 92mm Power
INSTALLATION & OPERATION
INSTALLATION
EDGE OF WORK SURFACE
LY
LY
N
CHARGING O
N
50mm
CHAR
GI
N
G
O
CUT-OUT
WORK SURFACE
STEP 1
Make a cut-out in a predetermined location with a
diameter of 92mm.
Ensure there is sufficient
clearance; 150mm below the
work surface and at least
50mm between the cut-out
edge and the edge of the
work surface. Ensure the
cable can reach the power
point with ease.
STEP 2
Remove the locking collar by
twisting it off in a clockwise
direction (when viewed from
above). Do not connect the
unit to power until the
installation is complete.
STEP 3
Drop the unit, cable first, into
the precut mounting hole and
angle the unit in the preferred
orientation..
STEP 4
Once the unit is positioned in
the mounting hole, attach the
locking ring by twisting it on
in a clockwise direction
(when viewed from below)
until tightly fastened. Keep
the unit in the desired
orientation while fastening.
DATA & CABLE INSTALLATION
CHARGING O
N
LY
STEP 1
Pull the locking pins away from
the unit wall to disengage while
pushing down on the data
interface on top of the unit.
STEP 2
Slide the comms module out.
STEP 3
STEP 4
Ensure that the comms mode
is securely clipped in from
below.
Insert the data connector from
below and ensure it is securely
clipped in. Replace the comms
module inside the unit from below.
DIMENSIONS:
Mounting Hole Diameter: 93mm (Approx 3-5/8 in.)
WORK SURFACE THICKNESS:
315°
45°
10mm - 50mm (Approx. 2/5 in. - 2 in.)
ELECTRICAL:
Operating Voltage:
Current:
Max Power:
220V - 250V @ 50 Hz
110V - 125V AC @ 60 Hz
15A
1800W @ 110V - 125V AC
3000W @ 220V - 250V AC
MAINTENANCE AND CARE:
Ensure unit is disconnected prior to cleaning.
Clean the unit with a damp cloth and dry immediately.
Do not use harsh chemical solvents.
Power Outlet
Orientations:
This outlet is
currently at 315°
PLEASE NOTE:
All products carry a 12
month limited warranty
which excludes normal
wear and tear and
product abuse. In the
event of product
tampering, the warranty
will be void.
!
WARNING
!
For indoor use only
If any malfunction occurs, do not attempt
to repair
Return product to manufacturer for repair
Do not insert foreign objects into power
outlets
For counter top mounting
For other options, contact your distributor
© 2015 Copyright Powerlogic SA (Pty) Ltd. All Rights Reserved. Due to continual product improvements and
upgrades, Power Logic reserves the right to amend and change products as it sees fit. As such, images of
products are for indicative purposes only and actual products may vary from those depicted and certain
options may be unavailable. Always check with your distributor or with Power Logic regarding availability of the
product of your choice.