Download Report

Traditional Czech Beads
Spring Bracelet
Bracelet made from PRECIOSA Ripple™ pressed beads
DESIGN BY ALEKSANDRA LYSENKO
PRECIOSA ORNELA presents the new PRECIOSA Ripple™ pressed bead
from the PRECIOSA Traditional Czech Beads brand.
PRECIOSA RippleTM
ART No.: 111 01 351
SIZE: 12 mm
Traditional Czech Beads
BEAD SHOP ZÁSADA
468 25 Zásada
+420 488 117 743
[email protected]
50°41‘49 N, 15°15‘55 E
GLASS SHOP DESNÁ
Krkonošská, 468 61 Desná
+420 488 117 525
[email protected]
50°45‘41 N, 15°19‘7 E
preciosa-ornela.com
facebook.com/PreciosaOrnela
March 2015 © PRECIOSA ORNELA, a.s.
preciosa-ornela.com © PRECIOSA ORNELA, a.s.
Spring Bracelet
Traditional Czech Beads
Traditional Czech Beads
Bracelet made from PRECIOSA Ripple™ pressed beads
You can follow this simple tutorial to create
an elegant bracelet from PRECIOSA Ripple™
pressed beads. The glossy version of the dualcolor vacuum decoration known as California
goes well with gold rocailles and together they
create a luxurious piece of jewelry.
Thanks to the wide range of beads and
seed beads from the PRECIOSA Traditional
Czech Beads brand, you can create your own
combination of colors and surface finishes and
in doing so harmonize your accessories with
your wardrobe and with any number
of occasions.
Procedure:
The bracelet is created using the so-called
„four-bead“ technique“.
Bracelet made from PRECIOSA Ripple™ pressed beads
Step 3:
Repeat the second step until the bracelet
reaches the required length.
Step 6:
Connect the fastening with the connecting ring
or sew it on using an R11. Attach the second
part of the fastening in a similar way.
Materials and Tools:
PRECIOSA Rocailles (R8)
331 19 001; 8/0; 59142 (ca 1 g)
through a few rocailles and tie a firm knot
which you should then dot with superglue
so that it does not later come undone.
Step 1:
String 1x R6, 1x Rip, 2x R6, 1x Rip, 2x R6,
1x Rip and 1x R6 onto a line which is about
1.5 m long. Move the stringing to the middle of
the line. String 1x R6, 1x Rip and 1x R6 onto
one end of the line and thread the second end
through them in the opposite direction.
PRECIOSA ORNELA wishes you much
inspiration and enjoyment from beadworking
with beads and seed beads from the
PRECIOSA Traditional Czech Beads brand.
PRECIOSA Rocailles (R11)
331 19 001; 11/0; 59115 (ca 1 g)
Spring Bracelet
Step 2:
String 1x R6, 1x Rip and 1x R6 onto each end
of the line. String another trio of 1x R6, 1x Rip
and 1x R6 onto one of the ends and thread
the second end through them in the opposite
direction. Repeat this step one more time.
Step 4:
String 5x R11 onto each of the ends.
String 1x R8 onto one of the ends and thread
the second end through it in the opposite
direction.
PRECIOSA Rocailles (R6)
331 19 001; 6/0; 59142 (ca 15 g)
PRECIOSA Ripple™ (Rip)
111 01 351; 12 mm;
00030/98549 (64x)
a 0.25 mm nylon line (ca 1.5 m); 2x connecting
rings (gold); fastening (gold); scissors; needle
nose pliers; flat nose pliers; snipping pliers
Difficulty:
document name: project-spring-bracelet.pdf
Step 5:
String 2x R11 onto each end. Then string a
further 2x R11 onto one end and thread the
second end through them in the opposite
direction. Thread both ends of the line back
March 2015 © preciosa-ornela.com