pureLED HiPower Dot

pureLED
HiPower Dot
PL-HiPowerDot-IP66/12V
Single 10mm LED addressable nodes for complex
artistic effects for use with PureDrive controllers.
The pureLED HiPower Dot is a high brightness, full colour, individually addressable LED node. Supplied in strings of up to fifty
nodes on a flat flexible cable, the HiPower Dot offers excellent weatherproofing with an IP66 rating. The 120 degree beam
angle delivers excellent spread perfect for both direct view and indirect installations. Standard spacing is 100mm between
node centres and custom spacing is available if required. Maximum cable length of 50 metres and 500 nodes per controller
output means large installations are simplified with fewer controllers and repeaters required.
HiPower Dot can create any desired effect from subtly shifting glow to a spectacular light show using high speed motion
effects. The possibilities are limited only by your imagination.
Specifications
Type
Colour
Optics
Lens
Power (at maximum output)
IP Rating
Beam Angle
Cut Length
Max Cable Length
Max Nodes Per Controller Channel
Voltage
Control Options
Mounting Options
Dimensions
PL-HiPowerDot-IP66/12V
Full Colour RGB
Single 10mm High Brightness RGB LED per node
Frosted mini dome lens
0.3W per node
IP66
120 degrees
Every node—Varies with spacing. Standard 91.5mm
50 Metres
500
12V DC
pureLED PureDrive 8K, PureDrive 1K
Surface, Suspended, Recessed, Wall, Cove,
OEMCode
Ordering
PL-HiPowerDot-IP66/12V
No options available for this model
13
Fits 12mm Ø
36mm
Distributed by pureLED Australia. Manufactured in China.
Rev 1