1. No category

®
Radex 170406
Antihologram compound
Technical Data Sheet
Name
®
Radex Antihologram compound
Description
®
Radex RADEX antihologram compound is a very fine, black paste which removes swirl marks, blooms and holograms,
especially on dark paintworks. The extremely fine nano-particles guarantee an outstanding final finish with an unmatched
deep gloss. The cut intensity can be regulated by using different polishing pads and polishing speed.
Available forms and sizes
Plastic bottle.
Size, liters:
Bottles per box, pcs:
1
6
Recommendations for use
Radex® one step polishing compound can generally be used with all RADEX RDE polishing pads. For the best result, we
recommend using RDE 03 black polishing pad. Recommended polishing speed 1200 – 1500 RPM.
Physical properties
Material:
Density, kg/l:
Viscosity, Pas:
Colour:
pH-Value:
Paste liquid.
1,50
5–9
white
6–9
Advantages
• Deep gloss
• Residues can be cleaned up easily after polishing.
• Silicone free and safe for all paint shop applications.
Storage
Store in clean and dry well ventilated area, preferably at a temperature between 15°C to 30°C in original packing. If
conditions are fulfilled the product can be stored for 24 months from the date of production. Keep from freezing!
Safety instructions
Inhalation: Insure supply of fresh air. In the event oа symptoms seek for medical treatment.
Skin contact: When in contact with the skin, clean with soap and water. Consult a doctor if skin irritation persists.
Eye contact: In case of contact with eyes rinse thoroughly with plenty of water and seek for medical advice.
Ingestion: Rinse out mouth and give plenty of water to drink. Supply with medical care.
Limitation of responsibility
The above information is given in good faith, but the user should assure himself that the performance of the product is
sufficient for his application. The quoted values are average and should not be taken as maximum or minimum values for
specific purposes. We can’t be held responsible for product failure unless full testing has been carried out. The customer
has to decide on the tapes suitability for their own applications.