G 7246 7240 rs e g n a h e C r y T g Swin SPEEDCHANGER G7246ID.26A •26” outside clamping •220 volt variable speed drive •8000 lbs. bead breaker High performance swing arm tire changer for the high volume tire centers. Exclusive 220v drive motor provides needed torque for handling today’s difficult assemblies. True variable speed control allows operator to match turntable rotational speed with the job at hand. The frame is large and reinforced, to grant the utmost rigidity to the structure and chucking table. The gear box is installed between two steel plates, to avoid flexion during operation. The extra height of the vertical post and tool shaft allow operation on tyres to a max. of 15” (381 mm) width. Available on 110V and single speed. Ref. G7246I.26A G72646ID.26A 220V G7246I.26A 110V IN OUT Ø MAX VARIABLE SPEED 12”-28,5” 10”-26” 46” (1170 mm) 1 SPEED 12”-28,5” 10”-26” 46” (1170 mm) 0 -15 EXTRA WIDE (BALOON TYPE) EXTRA LARGE 15 RPM 15” 46” G7246ID.26A 10” - 26” 12” - 28,5” 46” (1200 mm) 15” (380 mm) 15” (380 mm) OPTIONS PLUS91SA HELPER Plus91SA help device is optional for 7246. 8000 lbs (3600 kg) 220V - 1 hp 6,5/13 rpm 1200/900 Nm STANDARD METAL TOOL 27,2” 24,4” 60” (min.) - 72,2” (max) TECHNICAL DATA External clamping Internal clamping Max. tire diameter Max. rim width Max. bead breaker opening Bead breaker cylinder power at 175 psi Motor Turntable rotation speed Max. torque to turntable 12,2” 20,3” 54,7” (I versions) ” G7246ID.26A + PLUS91SA 36 47” Packing Dimensions 45” Shipping weight 550 lbs (250kg) RAV Equipment U.S.A. Inc. 800.816.8138 info@ravamerica .com www.ravamerica.com INTERNATIONAL Ravaglioli S.p.A. 40037 Sasso Marconi Fraz. Pontecchio M. P.O.B. 1690 - Bologna - Italia Tel. +39 - 051 - 6781511 Fax +39 - 051 - 846349 [email protected] www.ravaglioli.com Plus91N help device is optional for 7240. 8000 lbs (3600 kg) 110V - 1 hp 9 rpm 1200 Nm Packing Dimensions ” •Top European quality at an entry level price. •Heavy duty structure to guarantee proper working conditions at all times. •110 volt single speed motor •20” outside clamping •Tire diameters of 40”. •Bead breaker: galvanised cylinder with simple operation. •Rigid self-centering chuck and wide clamping range. G7240I.20A 10” - 20” 12” - 22” 40” (1000 mm) 12” (305mm) 12” (305 mm) 30 G7240I.20A TECHNICAL DATA External clamping Internal clamping Max. tire diameter Max. rim width Max. bead breaker opening Bead breaker cylinder power at 175 psi Motor Turntable rotation speed Max. torque to turntable 39” STANDARD SWING ARM 20/22 39” Shipping weight 495 lbs (225kg) OPTIONS G800A6 26” G800A5 20” (4 x kit) G800 A8 (2 x kit) G800 A8K (10 x kit) G800 A11K (5 x kit) G800A60 PLASTIC TOOL Technical data and composition presented in this catologue may vary. Pictures reproduced are only indicative.
© Copyright 2024