HL300 THERMO MARK II FEATURES • Adjustable dual front brakes • Single lever bead width adjustment with “OFF” position • Precision side mounted thermostat with dual indicator (no toggle switch or battery needed) • Stainless steel, brass and copper LPG supply lines and valves • Conveniently located operator controls • Internal divider screen • Noise-free operation • No exposed wiring • Precision wheel bearings • Ability to leave open beader box door during application for quick access • Low capital investment • • Rear swivel wheel for 360 degree application • • Bolt together assembly • Reservoir surrounded by 1” mineral wool insulation • Thermoplastic handliner • User Friendly Feature • Cost saving Feature • Exclusive Feature DOUBLEDROP BEAD SYSTEM UPGRADE AVAILABLE THERMO MARK II HL300 SPECIFICATIONS: MATERIAL CAPACITY 300 lbs / 136 kg APPLICATION DIE WIDTH: Min. 4", Max. 12" Standard., Custom width and dual line dies available HEATING TYPE LP gas (20 lb bottle required) DIE HEATER Infrared EMPTY WEIGHT 350 lbs / 158 kg MAIN BURNER Twin Ransome / 20000 BTU GAS CONTROL Honeywell BRAKES Adjustable dual front brakes w/hand controlled lever BEAD DISPENSER Wheel driven beader with application rate proportioned to ground speed DISP. WIDTH ADJUSTABLE 4", 6", 8", 12" and off position MANUAL FRONT POINTER Adjusts for all die sizes WHEELS Dual solid front and single solid rear wheels provide smooth operation MATERIAL AGITATION Manual / horizontal shaft / reverse pitch / flow paddles SHIPPING WEIGHT (Crated) 500 lbs / 205 kg REAR WHEEL (SWIVEL) Precision engineered with quick release lever CONSTRUCTION Aluminum with bolt-together assembly TURNING RADIUS 360° BEAD CAPACITY RESERVOIR Minimum 50 lbs DIMENSIONS: 52"L x 43.25"W x 37"H UNIVERSAL ATTACHMENT KEEP THE HANDLINER FILLED FASTMELT 650 THE LATEST INNOVATIVE FEATURE FROM TITAN ASE The FM650 is a complete self-contained thermoplastic, propane fueled melting kettle on a skid. Its small footprint (48" wide by 42" depth and 51" tall) and empty weight of only 950 lbs make it one of the smallest and fastest melting kettles to date. It can be placed in the back of a standard pickup, flat bed or on a trailer. It has the ability to continually melt and hold 650 lbs. of thermoplastic material at proper temp for your handliner needs. JB70970A Titan ASE 8905 Gurley Road Douglasville, GA 30134 1-866-273-4357 www.AdvancedStripingEquipment.com MADE IN THE USA
© Copyright 2024