SAIK YO English Français LED TV / DVD / DVD The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing LLC in the United States and other countries. Enabling certain features and functionality in this product (e.g. Picture Mode, Volume) may increase its energy consumption, possibly beyond the limits required for ENERGY STAR qualification. This product has earned the ENERGY STAR qualification meeting US Federal Energy efficiency guidelines as established by the Department of Energy and Environmental Protection Agency. The ENERGY STAR program exists to provide energy saving guidelines and help promote energy efficient products and practices. Power Saving Mode is the mode in which the product qualifies for ENERGY STAR . L'activation de certaines fonctions et fonctionnalités sur ce produit (p. ex. Mode image, Volume) peut augmenter sa consommation d'énergie, probablement au-delà des limites requises pour la qualification ENERGY STAR . L'homologation ENERGY STAR a été conférée à ce produit en conformité aux normes d'efficacité de la Commission fédérale de régulation de l'énergie (É.-U) établies par le Ministère de l'énergie et l'Agence pour la protection de l'environnement. Le programme ENERGY STAR existe pour fournir des directives relatives aux économies d'énergie et pour contribuer à la promotion de produits et de pratiques efficaces du point de vue énergétique. SKTVDOMV01 TABLE OF CONTENTS Instructions DVD DVD 33-34 35 36 37 FCC Declaration or Conformity Compliance statement (Part 15): This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The party responsible for compliance to these rules is: ORION SALES,INC. 3471 N.UNION DR. OLNEY,ILLINOIS 62450,U.S.A Ph:1-800-289-0980 Ins truc tion s Ins truc tion s EXAMPLE OF ANTENNA GROUNDING AS PER THE NATIONAL ELECTRICAL CODE ANTENNALEADIN WIRE GROUND CLAMP ELEC TRIC SERVICE EQUIPMENT NEC-NATIONAL ELECTRICAL CODE S2898A ANTENNA DISCHAGRE UNIT (NEC SECTION 810-20) GROUNDING CONDUCTORS (NEC SECTION 810-21) GROUND CLAMPS POWER SERVICE GROUNDING ELECTRODE SYSTEM (NEC ART 250,RARTH) 26) Where the mains plug is used as the disconnect device, the disconnect device shall remain readily operable. 27) Explanation of symbol, marking, signal lamp or similar means indicate that apparatus is completely disconnected from the mains. This equipment is a Class II or double insulated electrical appliance. It has been designed in such a way that it does not require a safety connection to electrical earth. 28) Correct Disposal of this product. This marking indicates that this product should not be disposed with other household wastes throughout the EU. To prevent possible harm to the environment or human health from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of material resources. To return your used device, please use the return and collection systems or contact the retailer where the product was purchased. Ins truc tion s Warning: batteries(pack or batteries installed) should not be exposed to excessive heat such as sunshine, fire or other heat sources. Ins truc tion s Ins truc tion s 10cm 10cm below Note: Drawing is a representative example only TV Buttons and Connections TV Buttons Note: The following is only a representation of the buttons on your unit. The actual position and arrangement of the buttons may differ by model. :Turn ON/OFF Power. SOURCE:External Signal Input Selection. MENU:Display Main MENU And Confirm MENU Item Selection. CH+/-:Select Channel. VOL+/-:Adjust Volume. Connections INPUT VIDEO R L OUTPUT VIDEO R L INPUT Y Pb HDMI Pr AV input External AV Signal Input and Right/Left Audio Inputs. HEADPHONE AV Output External AV Signal Output and Right/Left Audio Outputs. HEADPHONE JACK Plug earphones into jack for private listening. Overrides speakers. USB Input This input is for service personnel only. Component Input Connect to a component output connection on your external device. HDMI Input Connect to a HDMI output connection on your external device. COAXIAL Output Connect to your SPDIF device COAXIAL OUTPUT R L Output Audio Out Right/Left Connect to your external device. OPTICAL Digital Audio Output. ANT 75/RF Connection Connect to the antenna/cable TV output of your device or wall plate. OPTICAL VGA Input Connect to your PC using a VGA cable(not provided). PC Audio Input Connect to your PC Audio Out using 1/8 line cord. 8 5V 0.5A Install and Connect TV Set your TV 1.Put your TV in a place that can bear the weight of the TV. To avoid danger, please do not assemble the TV near water or extreme heat(such as a furnace, light source,or candle.) Do not block the ventilation on the back of the TV. Connect antenna and power 2.Connect the antenna cable to the RF connection on the back of the TV. Plug the TV into the wall power outlet( AC120~ 60Hz). 3 Turn on the TV 3.While in standby mode the power indication light will be red.Press the power button on the TV or remote control.The light will change to green. FM ANT TV ANT TV signal output 2 1 Note: Picture for reference purposes only. TV Stand Installation Instructions TV Stand Installation Instructions 1 2 1. Open the carton and remove the TV, accessories, and base. 2. To avoid injury to the TV, place the TV face down on a firm surface, covered with a soft cloth. Attach the neck to the TV with the supplied screws. 3. Attach the base to the neck with the supplied screws. 4. Note: Insufficient tightening or incorrect installation of the stand will not support your unit correctly, and could result in damage or injury from a tip-over. 3 4 Setup Wizard If your preferred language is French or Spanish, exit this Setup Wizard by pressing the Menu button, and follow the instruction on page 19 to make your language selection and re-enter the Setup Wizard from that Menu screen. Select TV Location TV Location / Power saving Power saving Produces a lower power consumption mode. the default All children 7 years old and above General audience Parental guidance 14 years old and above 17 years old and above MPAA This system defines the rating control which come from MPAA rules. Rating Define G General PG Parental guidance suggested. Some material may not be suitable for children. PG-13 Parents strongly cautioned. Some material may be inappropriate for children under 13. R Restricted. Children under 17 require accompanying parent or adult guardian. NC-17 No one 17 and under admitted. X Adult audience only. Off No Rating Set audience. All ages admitted. interfering lines. Press the “D.Setup” button to enter the DVD settings menu, use the “ ” buttons to select the desired menu page (General / Audio / Video / Preferences), and use “ ” buttons to select the items in each menu, then use “ ” button to enter the selected item. If you change any setting, press “ENTER” button to confirm your selection. Press the “ ” button to return to the sub menu, to go back up to one of the main DVD menu pages, press the “EXIT” button. 1.General Setup Page OSD Language: Set the language of the setup menu and screen display. Screen saver: Set the screen protection. Last Memory: Remember and resume from the position of the previous playback. 2.Speaker Setup Page Downmix: This is for DVD L/R and stereo output, factory default is set to Stereo output. 33 3.Video Setup Page Sharpness: Allows adjustment of the sharpness of the image. Brightness: Allows adjustment of the brightness of the image. Contrast: Allows adjustment of the contrast of the image. 4.Preference Page (Note: This menu page will pop up before a disc is inserted into the DVD mechanism.) TV Type: Select the local TV system (PAL TV/Multi/NTSC TV). Factory default is set to NTSC for use in North America. Audio: Disc audio language selection may be allowed, dependent upon the disc inserted. Subtitle: Disc subtitle language selection may be allowed, dependent upon the disc inserted. Disc Menu: Disc Menu language selection may be allowed, dependent upon the disc inserted. Parental: Set the maximum disc rating (OFF/G/PG/PG13/R/NC17/X-ADULT) that can be viewed without a password. (default password is 0000) Password: Allows user to change the password. Default: Choose this to restore the original default Preference settings 34 at the back of the unit from 35 Specifications Screen Size TV System 24” NTSC NTSC:AIR 2-69 CABLE1-125 28” NTSC NTSC:AIR 2-69 CABLE1-125 8W+ 8W 32” NTSC NTSC:AIR 2-69 CABLE1-125 10W+10W 39” NTSC NTSC:AIR 2-69 CABLE1-125 10W+10W 42” NTSC NTSC:AIR 2-69 CABLE1-125 10W+10W 50” NTSC NTSC:AIR 2-69 CABLE1-125 10W+10W Screen Size power Consumption (LED) Main accessories 24” 48W 28” 36W User's manual x1 32” 56W Remote controller x1 39” 75W 42” 85W 50” 135W Preset Channels Power cord x1 AAA Batteries x2 36 Speaker Output 5W+5W SLEEP: S.MODE: Select amount of time before TV turn off automatically. Press "-" to enter a program number for multiple program channel, such as 2-1 etc. Press to cycle through the different sound settings P.MODE: Press to cycle through the different picture settings P.MODE SLEEP S.MODE MENU SOURCE ENTER TV MTS: Press to select the audio mode, yo u can select St ereo, Mo no, or SA P(second audio program). ASPECT: Aspect function. D.Setup: CH +/- : Press to scan through or to select a channel. V +/-: Press to increase / de crease the sound level. EXIT AV YPbPr DVD HDMI PC DISPLAY ASPECT MTS D.setup FAV D.MENU: D.TITLE: GOTO: D.DISP: FAV+ FAV- REV FWD PREV NEXT ZOOM ANGLE AUDIO/CCD SUBTITLE Zoom Angle Audio Subtitle D.MENU D.TITLE GOTO D.DISP D.Menu D.Title Goto D.Disp PROG STEP REPEAT A-B PROG STEP REPEAT A-B SAIK YO STEP:Play for single frame image A-B During the playback,press this button to repeat playback of a specific section on a disc. 37 ZOOM In DVD source adjust DVD picture size AUDIO/CCD Press to dispiay the closed caption . SAIK YO ORION warranty this product to be free from manufacturing defects in material and workmanship under normal use and conditions for a period of 1 year from data of original purchase in the United States. Should service be necessary under this warranty for any reason due to a manufacturing defect or malfunction during the first 12 months from date of original purchase, ORION will provide carry-in service for units with a screen size of 40 inches or below, and in-home service for units 42 inches or greater in screen size by an ORION authorized Independent Service Center at no charge. Also, if an original part fails due to manufacturing defect in material and workmanship within one year from date of original purchase we will replace the defective part, provided the defect or malfunction is verified along with dated proof of purchase. There are ORION authorized Independent Service Centers located throughout the country. For the one nearest you, DIAL TOLL FREE:1-855-692-9192,ORION will not be liable for damages incurred in shipment of the unit. If there are no ORION authorized Independent Service Centers in your area please call 1-855-692-9192 for assistance.
© Copyright 2024