Setting up video results with RunScore Results Runners love to see videos of them crossing the finish line. This is easy to do with RunScore Results. Here is a video by Steve Stone showing how to set up your finish line to record the video. https://runsignup.wordpress.com/2014/12/19/guest-blog-video-results/ Once you have the video posted on YouTube, view it until you can clearly see the time on the finish-line clock. Record that time and how far you are into the video. This is displayed on the bottom status line of the video. Then go, in RunScore Results, to the listings and right-click on the listing that you used to upload results and select RunScore Results to .../Edit video settings. You will then see the Finish Line Video Setup Dialog. You copy the part after "v=" of the link for the video. The "Column header" field is the header for the column that displays the clock time. When you click "Save and Exit", the data will be saved in the race folder with a name "5K.VideoSetup.txt" where the "5K" is the name of the listing you are using. Notice that you could have more than one video setup -- one for each listing file. If you already have the results on the web, it then takes only a click on "RunScore Results to .../Upload video settings" to send these settings to the web. If you don't have the results there, you must upload them first. Then upload the video settings. When they are uploaded, in RunScore, go to Online/Race/View RunScore Results online. You will then see, on the Results page: When "Video" is clicked, you are taken to the YouTube video about 5 seconds before 1:41:00: