Decorative Brackets

Decorative Bracket Installation
Tools needed:
Each bracket comes with the following installation hardware:
Description
1.25" Screw
.5" Screw
Letter
A
B
Quantity
2
2
A
B
1
Select your bracket quantity, size, and style.
2
Select your shelf size and color.
10"
8"
8"
6"
6"
8"
For 10" deep board installations: Mount the 8" side of the 6" x 8"
bracket to the board. Mount the 6" side directly to the wall.
For 8" deep board installations: Mount the 6" side of the 6" x 8"
bracket to the board. Mount the 8" side directly to the wall.
3
Locate wall studs and mark mounting locations of the
top hole of the brackets, ensuring the holes are level.
You should install brackets into all possible studs along
the length of your shelf for stated load capacities.
4
Partially install Screw A into marked holes at stud
locations leaving a small gap for bracket adjustment.
5
Place the top hole of the bracket onto screw and push down
to secure. Use screws A to secure the bottom of the bracket
into the stud. Tighten down the top screw.
6
16" center
to center
A
A
Rest shelf on brackets. Use screws B provided
to secure the board to the brackets.
B
B