Protect your loved ones with
Introducing
SafetyGat ,.
Consumer Retrofit
by SafeStart Systems'"
Each year, thousands of children
and adults are injured when an
electrically powered device
unexpectedly comes back on
after a power interruption.
The cause of these injuries is
when an appliance or tool's
switch is left "on" after a power
outage, circuit breaker trip or
accidental unplugging from the
wall outlet.
Our patented SafetyGate™ Retrofit
Product Series can eliminate the
dangerous hazard of unauthorized
restarts found in over 1.3 billion consumer
appliances, power tools, and industrial
machines in use today.
and prevent dangerous restarts.
The Safety Gate Consumer Retrofit™
is completely automatic. There are no
buttons to push or switches to reset. It
weighs less than 5.6g (2 oz.) and two
retrofits can be used in a standard wall
outlet. Because of SafeStart Systems'
miniaturization technology. consumer
appliances can now have the same safety
restart protection previously available only
for large Industrial machinery, as required by
OSHA, NFPA and the CSA*.
The ingenious lock release allows you to
remove the Safety Gate TM Consumer Retrofit
should the time come to replace your
appliance. The Safety Gate™Consumer
Retrofit is manufactured in the U.S.A. and
comes in an attractive white housing with
yellow accents.
Available in Single, Dual and
Three-packs along with a SafetyGate TM
Professional Retrofit.
SaleStart11 ~
systems LLC
www. safetygatestore. com
www.safestartsystems.com
MADE IN THE USA
c@usumo
Specifications: 120v 60 Hz
15 Amp maximum
U.S. Patent #7,075,195 issued July 2006
#7,391,134 issued June 2008
Other Patents Pending
Underwriterslaboratories listed under the following standards:
UL 498A, UL 1569, CSA C22.2 No.42, Ul24lia
'Standards that apply to Machines Driven by 120 and 240 Volt Motors: IU S Occupational
Safety and HealthAdministration 29 CFR #1910.213. lbl 131'1:
"On applications where injury to the operator might result if motors were to restart after a
power failure, provisions shall be made to prevent machines from automatically
restarting upon restoration of power."
Electrical Controls for Wood Working Machinery
!Electrical Standard for Industrial Machinery, 2002 Edition):
"7 .5.3 Restarting Upon restoration of the voltage or upon switching on the incoming
supply, automatic or unintentional restartingof the machine shall be prevented when
sucharestart can cause ahazardous condition."
And Annex A: A.3.3.104 Undervoltage Protection:
1heprincipal objective of this device is to prevent automatic restarting of theequipment."
The ingenious locking mechanism ensures the SafetyGate will remain securely attached to your
household appliance's electric plug, preventing dangerous restarts at the source.
!Canadian Electrical Code Part 1, 28-400la) undervoltage protection required for motors) :
"When automatic restarting is liable to create ahazard, the motor control device shall
provide low-voltage protection."
preventing
dangerous
restarts in
and around
the home
& workplace