GLOVES GLOVES –

How To Choose The Right Glove
Pinked Cuff – A zigzag finished appearance
commonly found on knit-lined rubber gloves.
Rolled Cuff – Gives additional cuff strength
and a finished appearance. Acts as a barrier
to keep chemicals from running off glove into
skin.
Straight Cuff – Provides a snug fit to protect
from chemical runoff and skin contact.
Unlined – Gives you better sensitivity and
dexterity than lined gloves. Required where
particle contamination is a concern. Powdered
unlined gloves make on/off easier and increase
comfort.
GLOVES
Disposable....................................... 123 - 127
Finger Cots................................................127
Chemical Resistant......................... 128 - 133
Poly / Cotton & Cotton.................... 134 - 136
Coated Cotton................................. 136 - 140
Cut Resistant................................... 141 - 146
Leather............................................. 147 - 149
High Temperature......................................150
Welding............................................ 150 - 151
Vibration....................................................152
Mechanic.......................................... 153 - 157
Cleanroom....................................... 157 - 158
Flock Lined – Shredded fiber, usually cotton,
applied to inside surface of glove material.
Absorbs perspiration. Easy on/off.
Wrist/
Forarem
length
9-14”
Knit Lined – Cotton or synthetic material
bonded to in side surface of glove. Absorbs
perspiration, adds temperature protection.
Jersey Lined – Softest, most comfortable lining. Gives additional temperature protection
and greater cushioning effect.
Gauge – Thickness of glove material usually measured in mils
(1 mil=0.001” gauge). Lower-gauge gloves allow better dexterity and
flexibility. Higher-gauge gloves give better protection, but less flexibility.
Raw Material
Characteristics
Advantages
Precautions for use
Types of hazard
Natural Latex
Excellent flexibility and resistance to tearing, cuts.
Good resistance to numerous
acids and ketones.
Avoid contact with oils,
grease and hydrocarbon
derivatives.
Elbow Length
14-18”
Size
To measure your hand
size, wrap a tape measure around the palm
at its widest point.
This measurement, in XS
inches, is equivalent to
6-7
the glove size (i.e. 9”
measurement = size 9)
Neoprene
Multi-purpose chemical
resistance: acids, aliphatic
solvents, ketones.
Shoulder Length
30-31”
S
7-8
Size Chart
M
L
8-9
9-10
Nitrile
Excellent resistance to abrasion,
snags and perforation.
Performs well when exposed
to sunlight and ozone.
Excellent resistance to hydrocarbon derivatives. No natural
rubber proteins.
Weaker mechanical resistance than natural latex,
and nitrile.
Avoid contact with
ketones and aromatic
solvents.
XL
11-12
PVC
Very good resistance to
acids and bases. No natural
rubber proteins.
Avoid contact with
ketones, oxidizing acids
and organic compounds
containing nitrogen.
The longer the line, the greater the resistance to the hazard concerned.
Abrasion
Cut
Tear
Puncture
Oils and greases
Hydrocarbons
Acids
Non Ketonic solvents
Ketonic solvents
Washing powders, detergents
Phone: 800-MALLORY
Fax: 360-577-4244
WWW.MALLORYCO.COM
121
GLOVES – INTRODUCTION
Gauntlet Cuff – Extended length protects
wrist area. Slides on and off easily. Allows for
maximum movement of forearm.
INTRODUCTION – GLOVES
What To Know About Gloves
Supported Hand Protection
Supported gloves are great for protection against solvents and chemical
resistance, abrasions, cuts and punctures. The glove shell can be dipped
into a polymer or the material can be dipped into a polymer before the
glove is sewn. The work applications determine which glove option is the
best choice for your hand protection needs.
Styles and Materials
• Dipped - Glove shell dipped in a polymer
• Neoprene - Provides greater flexibility plus comprehensive chemical
protection
• Nitrile - Offers excellent abrasion resistance
• PVC - Excellent liquid and solvent protection
• Rubber - For applications where gripping power, cut and puncture
resistance are a concern
• Vinyl - Breathable, easy gripping, minimizes absorption of water, oil
and grease
• Cut-N-Sewn - Sewn from material dipped in a polymer
• Nitrile - Excellent abrasion resistance and dexterity
• Vinyl (Impregnated and Laminated) - Flexibility and mild abrasion
resistance
Unsupported Hand Protection
Unsupported gloves are best when there is a need for greater dexterity
in applications requiring mild chemical protection or a disposable glove
solution. The gauge identifies the mil thickness of a glove. A thin gauge
allows a sense of touch and a heavy gauge provides greater protection and
durability.
Styles and Materials
• Heavy Gauge Unsupported - 45- to 50-mil thickness
• Latex - Greater protection and durability
• Regular Unsupported - 11- to 30-mil thickness
• Latex - Canners and flock-lined, natural rubber, most elastic substance
known
• Nitrile - Unlined and flock-lined, provides cut, snag, puncture and
abrasion resistance better than any other rubber
• Neoprene - Flock-lined, resists oils and offers less hand fatigue
• Neoprene On Latex - Flock-lined, unique dipping process to resist
specifically MEK and other ketones and acetones
• Neoprene Latex Blend - Flock-lined, blending of two rubbers for multipurpose use
• Disposable Unsupported - 5-mil thickness
• Latex - Medical or industrial grade, better dexterity, elasticity, cool and
comfortable
• Vinyl - Medical or industrial grade, durability, softness, no latex allergens
• Polyethylene - 125-mil thickness, promotes good hygiene
Cotton Hand Protection
Cotton gloves are a good choice for comfort and breathability in general-purpose applications and, in heavier weights, for abrasion and heat
protection. Cotton gloves can also be used to protect the product as well
as the hands.
Styles and Materials
• Quilted - For heavy multi-purpose applications and added heat protection
• Chore - General purpose work
• Double Palm - Minimal heat protection
• Hot Mill - Moderate heat protection
• Single Ply - For multi-purpose applications
• Canvas - 8-, 10- or 1-ounce fabric for general purpose work. Some
styles have PVC dots to provide better gripping ability and durability
• Jersey - 9-ounce jersey for general purpose work. Some styles have PVC
dots to provide better gripping ability and durability
122
Phone: 800-MALLORY
• Terrycloth - 9-ounce jersey for general purpose work. Some styles have
PVC dots to provide better gripping ability and durability
• Light Weight - For product protection
• Inspectors - Made with cotton or nylon, is reversible, and may also be
used as gloves or liners
About String Knit Hand Protection
String knit gloves are used for general-purpose work applications and can
provide cut and abrasion resistance, using high-performance yarns, to further protect the hands when working with sharp objects. Various material
weights provide longer durability or additional dexterity where needed.
Some styles may be dipped or coated with a polymer to provide a better
grip and increase durability.
Material Information
• High-performance Yarns - For multi-purpose applications that require
additional cut protection
• Dyneema® Knits - Excellent cut resistance
• Kevlar® Knits - Great cut resistance
• Stainless Steel - Steelcore, Steelcore II
• Multi-Purpose Yarns - For multi-purpose applications
• 100% Cotton - Absorbent and breathable
• Cotton/Polyester - General purpose work
• 100% Synthetic - Less linting than cotton
Leather Hand Protection
Leather gloves are best for protection from rough objects, sparks and heat,
and for cushioning from blows in heavy-duty work requirements. All
kinds of leather provide comfort, durability, dexterity, mild heat resistance
and abrasion protection. These advantages make leather a traditional
favorite for industrial workers.
Styles and Patterns
• Leather Palms, Gunn Patterns - For protection from rough objects,
sparks, heat and cushioning from blows in heavy duty work requirements
• Leather Palms, Clute Patterns - Greatest economy glove offering leather
protection
• Drivers - Allow more dexterity when operating heavy machinery and
vehicles
• Welders - Provide protection for welding and heat applications
• Mig/Tig Welders - afford a fine touch in low heat applications
Types Of Leather
• Cow - Cow leather is the most commonly used leather within the glove
industry due to its plentiful availability. The United States and Australia
produce the majority of these hides. The advantages include comfort,
durability, excellent abrasion resistance and breathability. Chrome tanning of this leather provides greater wear and heat resistance.
• Pig - Pigskin offers the greatest breathability due to the porous texture
of this hide. Additionally, pigskin tends to become softer with use and
withstands moisture without stiffening. When laundered, this leather
will return more to its natural soft texture than other leathers.
• Goat - Independent tests have proven this to be stronger and more
durable leather. The natural lanolin produced by goats helps to create
the softest, most abrasion-resistant leather. This leather is highly recommended for applications requiring tactile sensitivity.
Cuts Of Leather
• Grain - Grain leather is the smooth external side of the hide.
This type of leather provides durability and dexterity
• Split - Split leather is the rougher internal side of the hide.
The three different types of split leather are side, shoulder or belly split
• Side Split - comes from the rib area of the animal.
This part of the leather is more durable and provides the greatest
protection because of its greater density of fibers
• Shoulder Split - is more economical than side, but less durable.
The additional movement in the shoulder area creates fewer fibers and
a more visible texture difference
• Belly Split - is the most economical, but has the least consistency of
texture and appearance
Fax: 360-577-4244
WWW.MALLORYCO.COM
100% nitrile medical-grade long-cuffed exam
glove.
The world’s first accelerator-free disposable
nitrile glove. 100% nitrile utility grade glove,
ambidextrous.
Free from the accelerators common in all
disposable nitrile gloves which have been
linked to workplace conditions like Type IV
dermatitis. The hi-vis green color is great for
jobs where increased visibility and color-coded
operations are critical. Available in a smooth
finish or with new textured fingertips, N-DEX
Free provides laboratory, pharmaceutical, and
industrial workers an accelerator-free, latex-free option with greater grip,
comfort and dexterity. 9 1/2” long, 4 mil, powder free.
100 per dispenser, 20 dispensers per case. Please Specify Size: XS, S, M, L, XL
Item
Description
7705PF
9 1/2”, 4 mil Smooth
7705PFT 9 1/2”, 4 mil Textured
1-19
$12.00
$12.00
20+
$10.29
$10.29
Nitrile is more puncture & abrasion
resistant than latex or vinyl, and is the most
chemically resistant single-use material.
100% nitrile, non-latex medical-grade glove, available in low-powder or powder-free (PF), and featuring Best’s proprietary beaded and rolled
cuff design. The Ultimate N-DEX 9905 and
9905PF are ambidextrous and 11” long, 6 mil thick.
Priced per dispenser. Packed 50 pair per dispenser,
20 dispensers per case.
Nitrile medical grade long-cuffed exam glove, hand-specific.
The N-DEX 9005 and 9005PF are hand-specific and 11” long, 6 mil
thick.
Priced per dispenser. Packed 50 per dispenser, 6 dispensers per case.
Both gloves are rated as a Class 1 medical device. Meets NFPA 1999
requirements for Emergency Response, and OSHA guidelines for handling
chemotherapy drugs and bloodborne pathogens.
Please Specify Size: S, M, L, XL (XXL available only in 9905PF)
Item
Description
1-19
9905 9905PF 11” Low-Powder
11” Powder-Free
$11.83
$11.83
Item
Description
1-5
20+
$10.14
$10.14
6+
9005 11” Hand-Specific
$29.83 $25.14
9005PF 11” Hand-Specific, Powder-Free
$29.83 $25.14
*All N-Dex gloves are in Compliance 21CFR, 170-199. Manufactured in an
FDA-inspected ISO-9002 registered facility. Made in the USA.
N-DEX® Original
Nitrile utility grade glove.
NITRI-DEX™
100% nitrile, non-latex utility grade
glove, lightly dusted with USP-grade
corn starch. A powder-free version is
available. The Original N-DEX gloves
are ambidextrous and 9 1/2” long, 4
mil thick. **8005 offers more chemical,
puncture and abrasion resistance.
100 per dispenser, 20 dispensers per case. Please Specify Size: S, M, L, XL, XXL
Item
Description
7005
6005PF
8005
9 1/2”, 4 mil. N-DEX Original
$11.25
9 1/2”, 4 mil. Poweder-Free N-DEX$12.00
9 1/2”, 8 mil. N-DEX Plus**
$14.25
1-19
20+
$9.64
$10.29
$12.21
25 pairs per bag, 6 bags per case. Please Specify Size: XS-XXL
Item
Description
1-5
707-08
12” Nitri-Dex - Medium
$20.42 $17.50
6+
N-DEX NightHawk®
CleaN-DEX
®
Class 100 - 100% nitrile glove
Compatible in all classes of cleanrooms
and contain no natural rubber latex or
carbamates, which can cause allergic
reactions. Patented “low modulus”
formulation for the most comfortable
“dry end” glove or for double gloving,
or under-gloving applications. Thermally activated, these gloves relax and
conform from the heat of your hands.
Offer improved puncture and chemical resistance, and are inherently more
static dissipative for ESD sensitive operations than natural rubber. Cleaner
than vinyl. 11” long, 6 mil thick.
50 per bag, 20 bags per case. Please Specify Size: S, M, L, XL
Item
This unique 12”, 9 mil, Nitri-DEX
glove with tractor tread grip and
hand-specific design is the perfect
“hybrid” to bridge the gap between
chemical-resistant and disposable applications. Nitri-DEX is packaged in
a poly bag that has right-hand and left-hand specific compartments. Ideal
for food processing, agricultural produce, janitorial, automotive, aeronautics and pharmaceutical applications. Color blue.
Description
C9905PF 11”, Powder-Free, Nitrile 1-9
$16.33
Phone: 800-MALLORY
10+
$13.99
Sleek and sophisticated, the NightHawk is an accelerator-free, textured fingertip, disposable nitrile
glove offering the world’s least allergenic disposable nitrile protection. Ideal for jobs where the
going gets messy or the application calls for uncompromising tactile feel and touch, NightHawk
is perfect for workers in automotive, electronic
assembly, laboratory, and law enforcement and security environments.
NightHawk offers static-dissipative properties, and excellent protection
from blood-borne pathogens where contact with body fluids may occur.
9.5” long, 4 mil thick.
Sold in packages of 50. 20 pks/case.
Item
Description
7700PFTS Small (6-7)
7700PFTM Medium (7-8)
7700PFTL Large (8-9)
7700PFTXLXLarge (9-10)
Fax: 360-577-4244
1-19 pkgs.
$6.00
$6.00
$6.00
$6.00
WWW.MALLORYCO.COM
20+
$5.14
$5.14
$5.14
$5.14
123
GLOVES – DISPOSABLE NITRILE
Ultimate N-DEX® Long Cuff
N-DEX® Free
DISPOSABLE NITRILE • Dispensers – GLOVES
Trilites 984 CP Class 1000
Nitrilite®
Powder-Free, 100% Nitrile
Nitrilite gloves solve many of the contamination
problems caused by vinyl and natural rubber latex
gloves in today’s cleanrooms. Designed specifically
for critical environments, Nitrilite gloves offer
significantly reduced particulate and extractable
levels. They are 100% powder-free and contain no
plasticizers, silicone, or pigments. Plus, the superior
strength of nitrile means Nitrilite gloves can be thinner than comparable
vinyl or latex gloves, which results in a lighter, more comfortable glove
with improved dexterity and tactility.
• Ideal for: cleanrooms, handling sensitive parts and materials
6 mil ambidextrous, design in unique tri-polymer blend
of neoprene, nitrile and natural rubber provide comfort of
latex exam gloves with added strength, tear resistance and
chemical splash protection.
Extended 11.5” length offers extra protection to hand & wrist.
Textured grip with lightly halogenated finish for optimum tactility and grip; wet or dry. Exclusive finish minimizes tape and label
sticking to gloves. Powder-free clean process for no cross contamination.
In compliance with 21 CFR, 170-199.
• Applications: Laboratory Research, Light Assembly and Sorting, Precision Parts Handling, Light Maintenance
Purple color, Sizes S-XL. Packaged 100 per bag, 10 per case, priced per bag.
Sold 50 gloves per polypack. Please Specify Size: 7 (XS), 8 (S), 8.5 (M), 9 (L), 10
(XL)
Item
Description
93-311 5 mil, 12” length, powder-free ambi,
beaded cuff, textured fingers.
$15.00
1-11
$12.85
Premium Quality 100% Thin-Mil Nitrile
Touch N Tuff disposable gloves set a whole new standard
in comfort, durability, dexterity, and cleanliness. Made
of 100% nitrile, the gloves contain absolutely no
fillers, silicones, or plasticizers. And, although they
are only 4 mils thick, Touch N Tuff gloves provide
three times the puncture resistance of competitive
latex or vinyl gloves. 9.5 inches in length, they are available powdered or
powder-free.
• Ideal for: manufacturing, maintenance and cleanup, intricate parts
handling, laboratory analysis/technical work, hazmat
Description
9.5” Teal, lightly powdered, 4 mil $11.70 9.5” Teal, powder-free, 4 mil
$13.42
1-11
Sold 100 per bag, 10 bags per case. Note-XL
gloves 90 pairs/bag.
12+
$10.03
$11.50
• Non-sterile industrial grade gloves in
4 and 8 mil thickness
• Textured finish for better grip
• Resistance to a wide variety of chemicals
• Latex Free.
• Ideal for: Food processing, chemical processing, handling biohazards,
mail sorting, biomedical and other industrial applications needing
tactile sensitivity plus puncture and abrasion resistance.
Sold 100 per dispenser box, 10 boxs/case Please State Size : S, M, L, XL.
Description
1-11
6015 6020 6025 6030 Powder-Free - Chlorinated 4 mil
Powdered 4 mil Powdered 8 mil Powder-Free 8 mil $10.85
$10.33
$12.47
$13.10
124
Phone: 800-MALLORY
$13.83
Ideal for food handling and light duty
general-purpose jobs. Choose from blue
nitrile or natural color, latex to suit your
needs. Both styles have 9.5” beaded cuff,
and textured fingertips for good grip.
NitriShield® Non-Sterile
Nitrile Gloves
Item
Price
984 CP Class 1000
KleenGuard™ G10 .
Thin Mil Gloves
Caution: Component materials comply with FDA regulations for food contact.
TNT gloves are static-dissipative.
Sold 100 per dispenser box or 10 boxes/case. Please Specify Size: 6.5-7 (S),
7.5-8 (M), 8.5-9 (L), 9.5-10 (XL)
92-500 92-600 Description
98492
12+
Touch N Tuff®
Item
Item
12+
$10.40
$9.90
$11.95
$12.60
Item
G10 Blue Nitrile
1-9
57370
57371
57372
57373
57374
Size 6-7 (XS)
Size 8 (S)
Size 9 (M)
Size 10 (L)
Size 11 (XL)
$8.71
$8.71
$8.71
$8.71
$8.71
Item
Latex, Powder-Free
1-9
57170
57171
57172
57173
57174
Size 6-7 (XS)
Size 8 (S)
Size 9 (M)
Size 10 (L)
Size 11 (XL)
$5.77
$5.77
$5.77
$5.77
$5.77
Item
Latex, Light Powder
1-9
57270
57271
57272
57273
57274
Size 6-7 (XS)
Size 8 (S)
Size 9 (M)
Size 10 (L)
Size 11 (XL)
$5.67
$5.67
$5.67
$5.67
$5.67
10+
$8.02
$8.02
$8.02
$8.02
$8.02
10+
$5.31
$5.31
$5.31
$5.31
$5.31
10+
$5.22
$5.22
$5.22
$5.22
$5.22
AK244
Four Compartment
Glove Dispenser
Great for multifunction use. Store and
dispense a variety of items such as wipe
packets, small parts, earplugs, hair nets,
finger cots or whatever best fits your
needs. Hinged lid and doors.
Fax: 360-577-4244
Item
Description/Size
Price
AK244
4-Glove Dispenser,
16 3/4”W x 12”H x 8 1/2”D
$140.00
WWW.MALLORYCO.COM
Unsupported, disposable natural
rubber glove.
Tactile-sensitive 5 mil Derma Thin
is one of a few thin gauge disposable gloves still made in the USA,
and surpasses similar-gauge natural
rubber and vinyl gloves, in overall
quality, performance and value.
Derma Thin’s specially formulated,
100% natural-rubber compound features the finest quality natural rubber, so you get outstanding strength, wear, and dexterity in a glove that
is cooler, more durable, better fitting, more sensitive and less susceptible
to tearing or developing holes than similar-gauge vinyl gloves. Ergonomically-designed Derma Thin is comfortable, fits well, and provides a great
grip, wet or dry. Ambidextrous for economy and ease, Derma Thin is
lightly powdered with USP-grade corn starch instead of talc for easy donning and doffing to reduce the chance of contamination. 9 1/2” in length,
5 mil thick with rolled cuff. In Compliance 21CFR, parts 170-199.
Made in the USA.
Packed 100 gloves per dispenser, 20 dispensers/case. Please Specify Size: S, M, L, XL
Item
Description 1-19
20+
1005 W1005 9 1/2”, 5 mil, Green
9 1/2”, 5 mil, White
$8.75
$8.75
$7.50
$7.50
• Design: powder-free, beaded cuff, textured,
ambidextrous
• 9.4” long
• Thickness: 6.7 mil (at the fingertip) 5.5 mil (palm)
100 gloves (90 for XL)/dispenser box, 10-dispenser boxes/case
Item
Description
1-9
57110
57220
57330
57440
57550
XS
S
M
L
XL
$13.79
$13.79
$13.79
$13.79
$13.79
10+
$12.70
$12.70
$12.70
$12.70
$12.70
SAFESKIN® LPE .
Powdered Natural .
Rubber Latex™ Exam Gloves
•
•
•
•
9.5” long with beaded cuff
Smooth
Ambidextrous
Thickness: 6.7 mil (at the fingertip) 5.5 mil (palm)
100 gloves (90 for XL)/dispenser box
Conform®
5-Mil, 100% Natural Rubber Latex
Conform gloves provide the highest degree of dexterity
available with the strength and comfort of 100% natural
rubber latex. Component materials comply with FDA
regulations for food contact. Conform gloves are available
in three styles and two colors to allow you to choose the
correct glove for your specific application.
• Ideal for: laboratory analysis/technical work, intricate
parts handling, food processing and handling, quality
control, electronics assembly, light-duty maintenance and cleanup
This product contains natural rubber latex, which may cause allergic reactions in some individuals.
5 mil, 9-1/2”, natural, powdered, exam glove. 100 gloves/box; 10 boxes/case.
Sizes: S, M, L, and XL
Item
Description
1-9
69-210
Conform Latex gloves
$6.08
10+
$5.21
Item
Description
1-9
57270
57271
57272
57273
57274
XS
S
M
L
XL
$5.67
$5.67
$5.67
$5.67
$5.67
10+
$5.22
$5.22
$5.22
$5.22
$5.22
SAFESKIN®
Satin Plus Powder-Free
Natural Rubber Latex™
Exam Gloves
• Beaded cuff, smooth, ambidextrous
• 9.4” long
• Thickness: 6.7 mil (at the fingertip) 5.5 mil (palm)
100 gloves (90 for XL)/dispenser box, 10-dispenser boxes/case
Conform XT
®
Disposable Natural Rubber Latex
Conform XT is 100% natural rubber latex features a
textured grip, and qualifies as a Class I medical device.
• Ideal for: laboratory analysis/technical work, food
processing and handling, quality control, electronics
assembly, light-duty maintenance and cleanup
Component materials comply with FDA regulations
for food contact. This product contains natural rubber
latex which may cause allergic reactions in some individuals.
Description
1-9
69-318
Conform XT Latex gloves
$11.23
Phone: 800-MALLORY
Description
1-9
SP2110
SP2220
SP2330
SP2440
SP2550
XS
S
M
L
XL
$8.38
$8.38
$8.38
$8.38
$8.38
10+
$7.65
$7.65
$7.65
$7.65
$7.65
Economy Latex Disposable
Latex disposable gloves. Made with USDA approved materials (for safe
food handling). Ambidextrous, 9”, with rolled cuff, available in lightly
powdered and powder-free. Natural, powder-free, textured grip, 5 mil, Class I medical device
100 gloves per dispenser, 10 dispensers per case. Sizes S, M, L, XL
Available in sizes: S, M, L, and XL.
Item
Item
Packed 100 gloves per dispenser, 10 dispensers per case. Please Specify Size: S, M, L
10+
$9.63
Item
Description
1-9
GRDR
GRPR
9”, 5 mil. Powdered
9”, 5 mil. Powder-Free
$5.40
$6.23
Fax: 360-577-4244
WWW.MALLORYCO.COM
10+
$4.90
$5.65
125
GLOVES – DISPOSABLE LATEX
Derma Thin™
SAFESKIN® PFE .
Powder-Free .
Natural Rubber Latex™ Exam
Gloves
DISPOSABLE LATEX, VINYL – GLOVES
911A Series
Helping Hands™
Glove Program
Latex Powder-Free “High Risk” Exam
Gloves
Help fight Childhood Cancer.
Each uniquely designed box you
purchase will result in direct
finacial support to those lives touched by childhood cancer.
12”, 14 mil latex, ambidextrous,
powder-free, dispenser boxed, textured
examination glvoes. Tapered, beaded cuff.
Meets or exceeds FDA specs.
50 Gloves/box, 500 gloves/case. Please Specify Size: (XS-100), (S-101), (M-102),
(L-103), (XL-104).
LEX Series
Lightly Powdered - Medical Exam
10” latex, ambidextrous, lightly powdered,
dispenser boxed, smooth examination
gloves. Tapered, beaded cuff. Meets or
exceeds FDA specs.
100 Gloves/box, 1000 gloves/case. Please Specify
Size: (XS-100), (S-101), (M-102), (L-103),
(XL-104).
Item
Description
1-9
911A
12” Latex Powder-Free
$10.52
10+
$9.25
NPX Series
Item
Description
1-9
LEX
10” Latex, Lightly powdered
$4.86
10+
$4.04
Powder-Free Medical Exam
10”, 14 mil nitrile, ambidextrous,
powder-free, dispenser boxed, full textured examination gloves.
100 Gloves/box, 1000 gloves/case. Please
Specify Size: (XS-100), (S-101), (M-102), (L-103), (XL-104).
LPX Series
Powder Free - Medical Exam
Item
Description
1-9
NPX
NPXO
10” Nitrile Powder-Free
10” Nitrile Powder-Free Orange
$10.05
$10.24
10+
$9.25
$9.40
9” latex, ambidextrous, powder-free, dispenser boxed, smooth examination gloves.
Tapered, beaded cuff. Meets or exceeds
FDA specs.
100 Gloves/box, 1000 gloves/case. Please
Specify Size: (XS-100), (S-101), (M-102),
(L-103), (XL-104).
PFXT SERIES
Item
Description
1-9
LPX
9” Latex, Powder-Free
$6.03
10+
$5.55
LPXT Series
Powder Free - Medical Exam
10” latex, ambidextrous, powder-free,
dispenser boxed, textured examination
gloves. Tapered, beaded cuff. Meets or
exceeds FDA specs.
100 Gloves/box, 1000 gloves/case. Please Specify Size: (XS-100), (S-101), (M-102),
(L-103), (XL-104).
Item
Description
1-9
LPXT
10” Latex, Powder-Free
$6.21
10+
Latex Powder-Free Cleanroom Class
100 Gloves
• Textured surface
• Low protein and contact sensitizers
• Class 100 (m3.5) clean room compatible or higher
Controlled environments
• Double chlorinated
• Double bagged
• Tapered, beaded cuff
• 10” And 12” length, ambidextrous
• Total protein content <50ug/g of glove (ppm) using modified
Lowry Method
• Leak tested
• Meets or exceeds FDA requirements with 510(k) registration
• Meets ASTM D3578-95 standards
• Sampled in accordance with MIL STD-105E
• Complies with U.S. Government 21 CFR 177.2600 for food handling
• Qualified for use in the pharmaceutical industry
10” PFXT Series sizes – Small (1), Medium (2), Large (3), X-Large (4)
12” PFXT Series sizes - Small (1), Medium (2), Large (3), X-Large (4)
$5.72
Item
Description
1-9
PFXT10*
PFXT20*
10”, PFXT Low Powder Glove
12”, PFXT Low Powder Glove
$6.58
$8.86
10+
$6.06
$7.91
We stock a full line of Clean Room gloves and related products, so please ask if you do not see what you need!
126
Phone: 800-MALLORY
Fax: 360-577-4244
WWW.MALLORYCO.COM
•
•
•
•
•
•
•
•
Lightly Powdered Vinyl .
Disposables
Choose powdered or powder-free
5 mil thickness
Textured finish for better grip
Rolled cuffs
Component materials comply with FDA regulations for food contact
Ambidextrous
Double chlorinated where noted by suffix of DC
Ideal For: clinical laboratories, nursing home care, dentistry, patient
examinations, pharmacy, and veterinarians
Vinyl disposable gloves, lightly powdered,
12” long. Ideal for: electronics, janitorial, labs,
maintenance, painting, poultry and meat handling, and seafood processing.
Packed 100 gloves per dispenser, 10 dispensers per case.
Please Specify Size: S, M, L, XL
Item
Description
1-9
V1000
12” Powdered Vinyl Disposable
$5.04
10+
$4.34
100 gloves per dispenser, 10 dispensers per case. Sizes S, M, L, XL
Item
Description
1-9
10+
Medical Grade
5000
5010
5045
5048
5050
Vinyl Powdered, Clear
$5.12
Vinyl Powder-Free,Clear
$5.64
Latex Powder-Free, Textured DC $8.75
Med,Tech Powder-Free Latex, DC
12” length, blue 50/per box
$11.70
Powdered Latex, Clear
$6.78
$4.91
$5.41
$8.40
$11.24
$6.50
Barrier
Flat-Film, Hand-Specific, Non-Woven Liner
A major breakthrough in flat-film glove technology,
Barrier gloves feature a unique non-woven liner that
absorbs perspiration and makes the gloves comfortable to wear, especially for extended periods. In
addition, the winged-thumb, hand-specific design
provides greater dexterity. Proprietary seam-fusion
technology provides a secure seal against chemicals
and also assures a flexible, comfortable fit for greater
dexterity and reduced hand fatigue.
• Ideal for: petrochemicals and refining, chemical
transport, hazmat work, aircraft and aerospace
Flat film, hand-specific, 2.5 mil
1 pair per polybag. Please state Right or Left hand and size, 6, 7, 8, 9, 10, 11.
Sensatouch™ Vinyl
Food and lndustrial
Grade gloves
• Choose powdered or powder-free
• 5 mil thickness or 6.5 Mil
Item
Description
1-9
10+
2-100
Non-woven liner
$6.11
$5.24
100 gloves per dispenser, 10 dispensers per
case. Sizes S, M, L, XL
Item
Description
1-9
10+
Food Industry Grade
5015
5020
5025
5055
5060
Powder-Free, Clear Vinyl
Powdered, Clear Vinyl
Powdered, Green, Vinyl 6.5 Mil
Powder-Free Latex, Blue, DC
Powdered Latex, Blue
$5.38
$4.95
$3.44
$8.66
$6.26
$5.16
$4.75
$3.30
$8.30
$6.00
Finger Cots
3 mil white latex. Finger cots provide low cost, convenient
protection when whole hand coverage is not needed. Static
dissipative.
Available rolled and priced per gross. Please Specify Size: S, M, L
Item
Description
Price
R200LWR Finger Cots
$4.42
VersaTouch™
Versatile, Economical 5-mil Vinyl Gloves
When you need economical hand/product protection,
VersaTouch clear 5-mil PVC gloves are the best choice.
They offer near “bare hand” dexterity and sensitivity, and
are available lightly powdered or powder-free. Component
materials comply with FDA regulations for food contact.
• Ideal for: light manufacturing, maintenance and
cleanup, painting and janitorial use
SAF-T-TAPE® Self-Adhering Gauze
• Improves grip while protecting fingers
• Allows greater flexibility than gloves
• Sticks to itself, not to skin or hair
• Permits skin to breathe for greatest
comfort
Sold 100 per box or 10 boxes/case. Please Specify Size: S, M, L, XL
Item
Description
1-11
34-700
34-725
34-775
White, lightly powdered
White, powder free
Blue, lightly powdered
$5.75 $9.00
$5.75
Phone: 800-MALLORY
12+
$4.93
$7.71
$4.93
Item
Description
UOM
Price
110-075
110-100
3/4” x 30 yd
1” x 30 yd
16 per tube
12 per tube
$21.57
$21.57
Fax: 360-577-4244
WWW.MALLORYCO.COM
127
GLOVES – DISPOSABLE LATEX, VINYL
Sensatouch™ Vinyl and
Latex Medical Grade
Exam gloves
CHEMICAL RESISTANT PVC – GLOVES
Ultimate Glove
Premium Double-Dipped
PVC Gloves
PVC Coated - Cotton Lined
• Maximum resistance to chemicals, oils,
solvents and strong acids
• Double-dipped sandy finish green with
knit wrist
• Flexible with interlock lining
• Non-slip grip in wet or dry applications
• Treated with Actifresh
• Ideal for: working with oils and solvents, petrochemicals and refining
Petroleum resistant, triple dipped, seamless gloves.
• Textured PVC grip over 100% seamless, cotton lining
• Ergonomic design provides dexterity and comfortable fit
• Heavy-duty PVC coating for puncture and liquid protection
• Premium appearance and excellent durability
Sold per dozen, 72/case. Sizes: M-XL. Color: Blue.
Item
Description
1-5
73356
Blue Ultimate Glove
$38.40
6+
$34.56
Sold per dozen or 72/case. Size: Men’s Large
Item
Description
1-11 dz.
6400
6410
6412
6414
6418
Knit Wrist
10” Gauntlet 12” Gauntlet
14” Gauntlet 18” Gauntlet
$27.71
$30.10
$33.14
$36.07
$50.09
12+
$26.56
$28.85
$31.77
$34.58
$48.01
Snorkel®
PVC-Coated, Premium Quality
One of Ansells premium gloves, Snorkel features a
unique PVC rough finish which provides outstanding
chemical resistance, wear, and flexibility. The finish contains nylon particles that increase the glove’s cut/abrasion
resistance and wet grip capabilities, while the PVC compound provides greater flexibility and comfort. Choose
between an interlock knit lining for increased flexibility
and launderability or a jersey lining for cushioning and
moderate insulation.
• Ideal for: : Petrochemicals and refining, handling equipment and abrasive materials coated with acids, caustics, solvents, grease, and oil.
Sold per pair.
Item
Description
1-11
12+
Fully coated, knitwrist, jersey-lined $3.18
$2.73
Fully coated, 12” gauntlet, jersey-lined Fully coated, 14” gauntlet, jersey-lined Fully coated, 12” gauntlet, knit-lined Fully coated, 14” gauntlet, knit-lined
Fully coated, 10” gauntlet, jersey-lined $3.90
$4.02
$4.80
$5.15
$3.60
$3.34
$3.44
$4.11
$4.41
$3.08
Women’s S, Men’s L 4-404 Men’s M & L
4-412 4-414 4-452 4-454 4-460 Super Flex™
Smooth finish fully PVC-coated
Best’s exclusive, low-temperature-resistant
PVC formulation keeps recyclable Super Flex
soft and supple even in cold conditions, while
providing excellent abrasion resistance and
protection from a broad range of chemicals. Its two-piece jersey liner enhances worker comfort and glove flexibility, and its yellow color provides
a high-contrast, visual warning of possible contamination due to spill,
splash or splatter. Super Flex is available in a variety of styles, including
a rough-finished style for applications where a good wet grip is required.
Sanitized®. Made in the USA.
Sold per pair or by 72/case. Size: Large
Item
Description
1-11
12+
753 755 756 -10
Knit Wrist
12” Gauntlet
Elbow-Length Gauntlet
$3.42
$3.90
$5.49
$2.93
$3.34
$4.91
Cannonball™ Gloves
High-grade PVC coating provides outstanding
chemical resistance, wear and flexibility, making this glove an excellent choice for abrasive
chemical applications. Featuring a unique,
non-slip wet grip. Suitable for handling slick, abrasive materials, provides
good protection against a wide range of chemicals. Launderable. Soft,
two-piece jersey liner enhances worker comfort and dexterity. Sanitized®.
Made in the USA.
Sold per pair or by 72/case.
PVC Insulated Glove
Item
Description
1-11
12+
803
L803
810
L811
812
812M
814
Knit Wrist, Large
Knit Wrist, Small
10” Gauntlet, Large
11” Gauntlet, Small
12” Gauntlet, Large
12” Gauntlet, Medium
14” Gauntlet, Large $3.42
$3.42
$3.35
$3.65
$3.90
$3.90
$4.02
$2.93
$2.93
$2.87
$3.13
$3.34
$3.34
$3.44
Double dipped PVC, resists oils,
solvents, and chemicals.
The Atlas 460 has a seamless 100%
acrylic pile lining to keep hands warm and dry. The insulated lining flexes
with the glove, reducing the hand fatigue associated with working in cold
environments. The double-dipped PVC coating is waterproof and chemical resistant, and is textured for positive grip, wet or dry.
Sold per pair.
Item
Description
1-11
12+
460
PVC insulated glove
$10.36
$9.25
128
Phone: 800-MALLORY
Economy
Foam-Lined PVC
Fluorescent orange PVC glove is fully coated
and foam-lined with a knit wrist.
Sold per pair.
Fax: 360-577-4244
Item
Description
1-11
12+
M6700 2 1/2” Rubberized Safety Cuff $2.86
$2.59
WWW.MALLORYCO.COM
600 Vinylove™
Petroflex®
Knit wrist for a snug fit, soft, flexible
PVC coating.
PVC-Coated
The 600 offers comfort and flexibility
as well as liquid-proof protection for
hands in wet working environments.
This short style glove has a specially
formulated PVC coating on an ergonomically shaped seamless liner, with a
cotton knit wrist.
600
620 Vinylove™
PVC double-dipped seamless knit,
outperforms unsupported latex gloves.
An economical choice for applications where gloves become excessively
contaminated or where glove controls are difficult to administer. The
rough finish optimizes cut/abrasion resistance and provides excellent wet
grip, while an interlock knit cotton lining provides flexibility and launderability. A jersey lining is also available for cushioning and moderate
insulation.
• Ideal for: refining and petrochemicals, machining, construction,
forestry, mining, utilities, handling equipment and abrasive materials
coated with oil, grease, acids, and solvents
Sold per pair or 72/case. Size: Large
Item
Provides workers with maximum comfort and dexterity. Liquid- and chemicalresistant PVC coating remains flexible
in cold temperatures and provides an
excellent grip.
Description 1-11
12+
Fully coated, jersey-lined
620
660 Vinylove™
Triple-dipped PVC, resists oils, solvents, and chemicals.
12-202
12-210
12-212
12-214
knitwrist,
10” gauntlet
12” gauntlet
14” gauntlet
$2.00
$2.22
$2.40
$2.70
$1.71
$1.90
$2.05
$2.31
$2.40
$2.70
$2.05
$2.31
Fully coated, knit-lined
12-252
12-254
Suited to a variety of work applications
requiring added protection. The 660
has the protection, comfort, and dexterity required for hard-working hands.
10” gauntlet
12” gauntlet
660
Sold per pair or by 144/case.
Item
Description
1-11
12+
600
620
620X
660
Green, Knit Wrist M-XL
12” Orange, S-L
12” Orange XL
12” Blue, S-L
$3.10
$3.95
$4.25
$3.36
$2.38
$3.20
$3.60
$2.58
Fuzzy Duck®
Features Best’s exclusive, breathable, PVC
coating on a soft, comfortable, two-piece
jersey liner. Abrasion resistant Fuzzy
Duck outwears and replaces cotton, light-to-medium-weight leather, and
goatskin gloves for a variety of applications. While not liquid-proof, the
textured coating provides an excellent grip and minimizes absorption of
water, oil and grease, although not a true anti-vibration glove, Fuzzy Duck
tends to absorb and minimize shock, too. Sanitized®. Made in the USA.
Economy Double-Dipped .
PVC Gloves
• Black, sandy textured finish with interlock
lining
• Ideal for: basic liquid, mild chemical protection, auto industry, construction & mining
• Men’s size Large fits most
Sold per pair or by 72/case.
Item
Description
1-11
12+
6500S
6510S
6512S
6414S
Knit wrist
10” Gauntlet 12” Gauntlet
14” Gauntlet $1.36
$1.56
$1.72
$3.06
$1.13
$1.29
$1.65
$2.48
Sold per pair or by 72/case. Please Specify Size: S, M, L, XL
Item
Description
1-11
12+
962 Fully-Coated Slip-on
$2.68
$2.30
Temp-Sea 770
Heavy Weight, smooth Blue 11” glove with
thermal lining and over-edged cuff. Liner made from acrylic terry knit
with brushed jersey for comfort and cold temperature protection (-22
degrees Fº). Specially formulated Blue PVC coating provides liquid proof
protection in wet applications, while maintaining flexibility and dexterity
in cold environments.
Offers excellent resistance to oil, grease and hydrocarbon.
• Ideal for: Fishing applications; Road maintenance; Cold storage facilities; Maintenance at ski resorts; Food industry, handling and operation
of cold storage units.
PVC Gloves
• Interlock and with smooth or sandy finish
• Fully coated-Black PVC
• Ideal for: liquid and basic chemical protection
for refining, mining and utilities, petrochemicals,
fishing, ship building, and handling abrasive
materials coated with grease and oil, caustics, acids
and solvents.
Sold per pair, 48 pairs per case.
Sold per dozen pair or by 12dz/case. Size: Men’s Large
Item
Description
1-11
6212 6212R 12” Smooth Gauntlet
12” Rough-sandy Gauntlet
$13.77
$14.81
Phone: 800-MALLORY
12+
$13.20
$14.20
Item
Description
Price
77039
Temp-Sea
$12.87
Fax: 360-577-4244
WWW.MALLORYCO.COM
129
GLOVES – CHEMICAL RESISTANT PVC
Vinylove™ Liquid Proof
CHEMICAL RESISTANT LATEX – GLOVES
Unsupported Lined
Latex Gloves
Chemical Resistant Gloves
Sold per dozen pair or by 12dz/case.
• 18 Mil., Flock lined, yellow, recessed diamond
grip
• Rolled bead cuff for tear resistance
• Provides resistance to acids, alkalis, alcohols, salts,
ketones
• Flock lining provides increased comfort and ease of donning
• Chlorinated
• 12” length
• Ideal for: electronics, laboratory, assembly and maintenance
•
•
•
•
12” length, 18 mil thickness
Embossed grip on palm and fingers
Straight cuff
Flock lined for easy on, easy off as well
as perspiration absorption
• Component materials comply with FDA regulations for food
contact
• Industry Applications: Food-processing industries, janitorial work,
poultry, and research laboratories.
Item
Yellow Flocked
1-11 dz.
5270P
5280P
5290P
Size 7
Size 8
Size 9
$7.92
$7.92
$7.92
Item
Blue Flocked
1-11 dz.
5270PB
5280PB
5290PB
Size 7
Size 8
Size 9
$7.92
$7.92
$7.92
12+
12+
$6.60
$6.60
$6.60
Providing unequalled value, comfort, and
flexibility as well as outstanding tactile
sensitivity, strength, dexterity and elasticity,
the form-fitting 12”, 18-mil, 100% naturalrubber-latex Value Master feature a selfflushing tractor-tread pattern that provides
an excellent grip, wet or dry, and encourages
run off of fluids often trapped by diamondshaped embossed patterns. Value Master resists a wide range of chemicals,
including animal fats, caustics, acids, oils, salts, alcohols and detergents.
Each Value Master is air tested to ensure quality. Value Master is available unlined, either amber (VMU) or blue (VMUP) or flock lined, either
yellow (VM) or blue (VMP). The VMU and VMUP are chlorinated to
provide extra, casehardened chemical resistance and to ease donning and
doffing. The VM and VMP feature 100%-cotton flocking for added comfort. Value Master gloves are available in four sizes for a perfect fit.
Sold by the dozen or12dz/case.
Description-Size
1-11 dz.
VMUAS
VMUAM
VMUAL
VMUAX
VMUPS
VMUPM
VMUPL
VMUPX
Unlined-amber - small (07)
Unlined-amber - medium (08)
Unlined-amber - large (09)
Unlined-amber - extra large (10)
Unlined-blue - small (07)
Unlined- blue - medium (08)
Unlined- blue - large (09)
Unlined- blue - extra large (10)
$8.52
$8.52
$8.52
$8.52
$8.52
$8.52
$8.52
$8.52
Item
Description-Size
1-11 dz.
VMS
VMM
VML
VMX
VMPS
VMPM
VMPL
VMPX
Flock-lined-yellow - small (07)
$7.08
Flock-lined-yellow - medium (08) $7.08
Flock-lined-yellow - large (09)
$7.08
Flock-lined-yellow - extra large (10)$7.08
Flock-lined-blue - small (07)
$7.08
Flock-lined- blue - medium (08)
$7.08
Flock-lined- blue - large (09)
$7.08
Flock-lined- blue - extra large (10) $7.08
130
Phone: 800-MALLORY
Sold per Dozen or 12 dz/case. Please Specify Size: S-XL
$6.60
$6.60
$6.60
Value Master™ ChemicalResistant Gloves
Item
General Duty -Unsupported Latex
12+
$7.32
$7.32
$7.32
$7.32
$7.32
$7.32
$7.32
$7.32
12+
$6.12
$6.12
$6.12
$6.12
$6.12
$6.12
$6.12
$6.12
Item
Description
1-11 dz.
48-G12Y
18 mil, flock lined
$7.98
12+
$6.88
Canners and Handlers™
Unsupported, unlined, medium-duty, natural rubber latex
Featuring excellent dexterity, tensile strength, and elasticity,
our 20-mil Canners and Handlers gloves are a good choice
for chemical, snag, puncture, abrasion, and cut resistance.
Offered in two lengths for added protection against chemical hazards and two embossing designs (pattern and pebble)
for excellent grip on wet or dry surfaces. These gloves are
made with component materials that comply with FDA regulations for
food contact.
• Ideal for: poultry, food processing, small parts assembly, pharmaceutical
manufacturing, janitorial/plant maintenance.
Sold per dozen or 144/case.
This product contains natural rubber latex, which may cause allergic reactions in
some individuals.
Item
Description-Size
384
392
394
Natural, pattern, embossed, 20 mil, 14”
7, 8, 9, 10
$15.60
Natural, pebble- embossed, 20 mil, 12”
6.5, 7, 7.5, 8, 8.5, 9, 9.5, 10, 11
$9.36
Natural, pattern- embossed, 20 mil, 12”
7, 8, 9, 10
$9.36
1-11 dz.
12+
$13.32
$8.04
$8.04
Unsupported Latex Gloves
•
•
•
•
•
12” length, 18 mil thickness
Embossed grip on palm and fingers
Scalloped or straight cuffs
Chlorinated for easy on, easy off
Component materials comply with FDA
regulations for food contact
• Industry Applications: canning and food-processing industries, janitorial work, maintenance, R & D.
Sold per dozen pair or by 12dz/case. Sizes: 7-7-1/2; 8-8-1/2; 9-9-1/2; 10-10-1/2
Item
Scalloped Cuff
1-11 dz.
5080E
5080B
5090E
5090B
Size 8 - Amber
Size 8 - Blue
Size 9 - Amber
Size 9 - Blue
$7.92
$7.92
$7.92
$7.92
Item
Straight Cuff
1-11 dz.
5180E
5180B
5190E
5199B
Size 8 - Amber
Size 8 - Blue
Size 9 - Amber
Size 9 - Blue
$8.04
$8.04
$8.04
$8.04
Fax: 360-577-4244
WWW.MALLORYCO.COM
12+
$6.60
$6.60
$6.60
$6.60
12+
$6.72
$6.72
$6.72
$6.72
Chem Master™
Neoprene Over Rubber
For insulation against heat or cold, Insulated
Neoprene features a triple-layer construction of foam insulation sandwiched between
a layer of 100% cotton jersey and 100%
cotton interlock. Gloves are fully coated and
rough finished.
Sold per pair, Large only.
Item
Description/Size
1-11 dz.
12+
6781R10 12” Gauntlet, Insulated
$10.93
6781R0610 6” Nitrile, Laminated
$16.67
6781R145 14” Nitrile, Laminated, Sewn Sleeve$23.88
$9.37
$14.92
$20.47
Defensive Guard™
Neoprene Gloves
Neoprene over natural rubber construction
provides excellent abrasion, tear, and puncture resistance. 100% cotton flock lining.
13” long, 26-mil, flock-lined, tractortread grip, black over blue safety feature.
Suggested applications: automotive and
battery manufacturing, chemical plants, aircraft assembly, food processing, pesticide manufacturing, plant maintenance and printing clean up.
21CFR, 170-199 compliant.
Sold per dozen or by 144/case. Please Specify Size: S, M, L, XL
Item
Description
1-11 dz.
CHM
13” Chem Master, 26 mil
$17.52
12+
$15.12
Chemi-Pro®
Unsupported, Heavy-Duty, Cotton Flock-Lined, Neoprene
Over Natural Rubber Latex
Neoprene-coated glove with sewn-on
nitrile-laminated sleeve. This rugged glove
is suitable for many pellet-blasting and
sandblasting applications. Launderable, the
sleeve is not liquid-proof, although the gauntlet itself is.
Sold per pair.
Item
Description/Size
1-11
6780-20
12” Gauntlet, Smooth,
w/ Sewn-on sleeve
$26.80
12+
$22.03
Neoprene™ Gloves
Multi-dipped in premium grade Neoprene for superior quality and durability and provides excellent protection
against acids, caustics, oils, greases and
many solvents. Suggested applications:
degreasing, petrochemicals, refining,
metal fabrication, plating, galvanizing,
and general material handling.
A unique dipping process which combines neoprene over
natural rubber latex provides increased protection against
a wide range of chemicals. The gloves are 27 mil thick for
extra ruggedness and durability, and the 13” length is longer than most standard gloves for added forearm protection.
A recessed diamond-embossed pattern provides added grip
on wet or dry surfaces, while a cotton flock lining absorbs
perspiration and increases worker comfort. Chemi-Pro gloves are an
economical, cost-saving substitute for higher-priced, heavy gauge nitrile
and neoprene gloves.
• Ideal for: aircraft assembly, automotive manufacturing, chemical plants,
pesticide manufacturing and plant maintenance
Caution: This product contains natural rubber latex, which may cause
allergic reactions in some individuals.
Sold per dozen. Please Specify Size: 7 (XS), 8 (S), 8.5 (M), 9 (L), 10 (XL)
Item
Description
224
Blue/yellow, diamond- embossed, flock-lined,
27 mil, 13”
$17.40
1-11 dz.
12+
$14.88
Sold per pair.
Item
Description
1-11
12+
$4.63
$6.10
$7.23
$10.20
$3.97
$5.23
$6.20
$8.74
$6.10
$7.23
$5.23
$6.20
Smooth Finish
5122
6780
6784
6797-10
Knit Wrist, Fully Coated, Large
12” Gauntlet, Fully Coated, Large
14” Gauntlet, Fully Coated, Large
Elbow-Length, Palm Coated, Large
Rough Finish
6780R-10 12” Gauntlet, Fully Coated, Large
6784R-100 14” Gauntlet, Fully Coated, Large
ChemTech Unsupported .
Neoprene-on-Latex Gloves
• Component materials comply with FDA regulations for
food contact
• 28 and 30 mil thick
• Flocked-lined, ocean blue with yellow cuff
• Embossed grip on palm and fingers
• Industry Applications: aircraft assembly, automotive and battery
manufacturing and printing industry.
• Lined-Black
Sold per dozen pair or by 12dz/case. Please state size when ordering.
Neoprene Dry Box Gloves
Neoprene, 8” dia cuff, 15 mil,
32” length, ambidextrous.
Sold per pair. Please Specifiy Size:
9Q (9 3/4), 10H (10 1/2).
Item
Description
Price
8N1532A/10H Dry Box Gloves
8N1532A/9Q Dry Box Gloves
$122.65
$122.65
Phone: 800-MALLORY
Item
28 mil – Blue/Yellow
1-11 dz.
5406S
5407S
5408S 5409S 5400S 5401S Size 6 Size 7 Size 8
Size 9 Size 10
Size 11 $22.49
$22.49
$22.49
$22.49
$22.49
$23.47
Item
30 mil – Black
1-11 dz.
5435
Sizes: S, M, L, XL
$28.08
Fax: 360-577-4244
WWW.MALLORYCO.COM
12+
$21.56
$21.56
$21.56
$21.56
$21.56
$22.50
12+
$26.88
131
GLOVES – CHEMICAL RESISTANT NEOPRENE
Insulated Neoprene™ .
& Nitrile Gloves
CHEMICAL RESISTANT BUTYL, VITON, NITRILE – GLOVES
Viton®/Viton® II
Butyl Glove
Unsupported Viton glove.
Butyl gloves exhibit the highest permeation
resistance to gas or water vapors. Ideal for
use in ketones and esters. 13 mil, 11” length.
Sold per pair. Please specifiy size: 7, 8, 9, 10, 11
Item
Description
Price
B131
11” 13 mil. Butyl Glove
$20.31
Heavy-duty yet flexible, Viton gloves were
developed for the highest chemical-resistance
barrier to aromatic hydrocarbons such as
benzene, toluene or xylene. Viton II gloves also offer an excellent barrier
to most chlorinated solvents and aliphatic hydrocarbons. Smooth finish
with rolled cuff.
890 14”, 30 mil Unlined, Please Specifiy Size: 9 (L), 10 (XL)
892 12”, 12 mil Please Specifiy Size: S, M, L, XL, XXL
Sold per pair.
ChemTek™
Performs under the toughest conditions
Offerin the broadest line of highly resistant chemical protective gloves in
the industry. For an extra measure of security, each pair is packed with an
individual insert so critical information is always at your fingertips.
ChemTek butyl gloves deliver the ketone resistance of natural rubber plus
better hydrocarbon resistance. They also provide the ester resistance of
nitrile with improved aldehyde resistance. If you need superior resistance
for ester, ketones and oxidizing agents including concentrated oxidizing
mineral acids such as 70% nitric and 98% sulfuric, you’ll find a ChemTek
butyl glove that fits your application.
The Viton layer over the butyl means a lower-cost glove for aggressive
chemical exposure.
• Ideal for: maintenance, sampling, production, hazmat, first response,
unknown exposure
Sold per pair.
Item
Description & Size
1-11
12+
14 mil, smooth finish, 12” length
7, 8, 9, 10, 11 14 mil, rough finish, 12” length
7, 8, 9, 10, 11 20 mil, rough finish, 12” length
9, 10 14 mil, smooth finish, 14” length
7, 8, 9, 10, 11 20 mil, smooth finish, 14” length
9, 10 28 mil, smooth finish, 14” length
9, 10 14 mil, rough finish, 14” length
7, 8, 9, 10, 11 20 mil, rough finish, 14” length
9, 10 $17.20
$14.74
$18.05
$15.47
$23.02
$19.73
$22.75
$19.50
$25.83
$22.14
$32.08
$27.50
$20.05
$17.18
$26.50
$22.71
12 mil, smooth finish, 12”length
8, 9, 10 20 mil, smooth finish, 12” length
9, 10
$58.40
$50.05
$81.73
$70.05
Silver Shield® Glove
2.7 mil., lightweight, flexible laminate material. Resistant to over 280 different chemicals,
including alcohols, aliphatics, aromatics, chlorines, ketones and esters.
Does not contain chemical accelerators that can cause allergic reactions.
Sold per pair.
$139.00
$68.50
Sold per pair. Item
Description
Price
46831
12”, 20 mil, Fluonit
$ 57.52
TopChem 345
Heavy Weight Gray 14.5”, smooth PVA
glove, knit lined with a pinked cuff. Provides chemical protection of the
top 12 hazardous chemicals, 3 gases and can withstand full immersion, in
pure water for 2 hours without degrading. Unique water resistant outer
layer allows gloves to be used in water-based solvents.
Multi-Layer construction offers inner layer of neoprene with several outer
layers of PVA with comfortable knit liner to absorb perspiration.
• Ideal for : Metal Treatment using solvents, Cleaning of printing presses,
Mixing of inks and paints, Manufacturing of resins and composite
materials, and Hazardous material handling.
Sizes: 7-10, Sold per pair.
Item
Description
Price
34531
Topchem
$54.63
Silver Shield®/.
4H® Sleeves
An excellent choice for chemical and
petrochemical laboratories, spill cleanups,
hazmat control operations, photo finishing, medical laboratories and other applications.
• Resistant to over 280 different chemicals, including alcohols, aliphatics,
aromatics, chlorines, ketones and esters
• Sleeves can be worn with gloves and/or apron to provide additional
protection for the arms and shoulders
Length 20”, 2.7 mil. Sizes: one size fits all. Made in USA.
Sold per pair.
Item
Description/Size
Price
SSG
Silver Shield Glove, 7, 8, 9, 10, 11
$4.75
132
Price
14”, 30 mil, Viton, Unlined
12” 12 mil, Viton II
Smooth black, unlined glove with pinked
cuff. Combines Nitrile layer and several outer layers of Fluoroelastomer
to provide excellent chemical protection against acids, alkali compounds,
alcohols, high aromatic solvents, aliphatics or chlorines.
The green nitrile interior provides the glove with superior mechanical resistance. As the black outer Fluoroelastomer layer wears through abrasion
the green inner layer will appear, indicating gloves should be replaced.
• Ideal for: Metal degreasing, Petroleum refineries, Site decontamination,
Cleaning Applications using hazardous solvents, Manufacturing of
paints, coatings, and varnish.
Viton/butyl
38-612 38-620 Description
890
892
Fluonit 468
Butyl
38-214 38-314 38-320 38-414 38-420 38-428 38-514 38-520 Item
Phone: 800-MALLORY
Fax: 360-577-4244
Item
Description
Price
SSS
20” Silver Shield Sleeves-pair
$13.50
WWW.MALLORYCO.COM
Chemical-Resistant
Unsupported Nitrile
Unlined, Green, Pebble-Grip Gloves
Light weight construction and hand specific
design provides real comfort and protection. Provides flexibility, tactile sensitivity and dexterity.
• Excellent resistance to animal fats
• Comply with fda regulation
• Used in light chemical applications, printing and meat and poultry
processing
Sold per dozen or 12 dz/case. Please Specify Size: 8, 9. 10, 11
Item
Description
1-11 dz.
310R
13” 11 mil. Unlined pebble grip
$15.68
12+
$13.52
Unsupported Nitrile
Gloves
Ideal for food processing (red meat,
poultry, dairy), chemical processing
(petrochemicals, oil refining), machine operations, graphic arts, battery
manufacturing and maintenance 13 length, heavy-duty non-slip grip.
Straight cuffs. Component materials comply with FDA regulations for
food contact.
Sold per dozen pair or by 12dz/case.
Item
Straight Cuff
1-11 dz.
5307 5308 5309
5310
5311
Size 7 Size 8
Size 9
Size 10 Size 11
$15.72
$15.72
$15.72
$15.72
$15.72
AquaKnight hand protection styles combine liquid and chemical protection with enhanced tactile sensitivity. The nitrile and neoprene styles
provide waterproof protection and the latex series is splash resistant. This
assortment of seamless knit liners with different polymers affords the
greatest dexterity plus chemical hand protection.
• Ideal for: Chemical processing, handling rough castings and steel bars,
metal treatment, paint and varnish manufacturing, petrochemical and
oil refining.
6942
Sold per the pair.
9685
6942 Waterproof Neoprene
65% Cotton / 35% Polyester
Seamless Liner
Sizes: L, XL
9685 Waterproof
13 Gauge Cotton Shell
Double Dipped Nitrile
Sizes: S, M, L
9697 Splash Resistant 13 Gauge Nylon Shell
Fully Coated With Stretch Latex
Knit Wrist
9697
Sizes: S, M, L, XL
Item
Description
Price
6942
9685
9697
Waterproof Neoprene
Double Dipped Nitrile
Fully Coated Latex
$7.48
$5.80
$4.25
12+
$15.12
$15.12
$15.12
$15.12
$15.12
Sol-Vex®
Unsupported, Premium-Quality,
Embossed Nitrile.
Sol-Vex gloves are made of a
high-performance nitrile compound which provides an outstanding combination of strength and chemical resistance. When exposed to aromatic
and petroleum solvents, as well as caustics and animal fats, Sol-Vex gloves
have proven to be a superior choice over rubber or neoprene. Sol-Vex
gloves won’t swell, weaken, or degrade, and offers better protection against
snags, punctures, abrasions, and cuts. Sol-Vex gloves do not promote
contact dermatitis, and their component materials comply with FDA
regulations for food contact.
• Ideal for: chemical processing, oil refining, petrochemicals; food
processing (red meat, poultry, vegetables, fruit, dairy, and canning);
machining operations using cutting oil and coolants, metal fabrication;
Graphic arts, printing cleanup
Blue Grit® Gloves
• First dip smooth rubber coating,
second dip in dry granular rubber for
extra grip
• 100% cotton lining for extra comfort
and absorption
• Cut- and puncture-resistant
• Made with FDA-accepted materials
for use in food processing
• Construction, fishing, glass handling,
masonry, painting, sheet metal industry and wood working.
Sold per pair or by 72/case. Please Specify Size: S or L
Item
Description
1-11
12+
6850
6852
Blue Grit 10” Length Blue Grit 12” Length $3.24
$3.41
$3.11
$3.27
Sold by the pair or 144 per case.
Item
Description/Size
1-11
12+
37-145
37-155
37-175
37-165
37-185
13” 11 mil., 6, 7, 8, 9, 10, 11
13” 15 mil., 7, 8, 9, 10, 11
13” 15 mil., Flock-Lined,
6, 7, 8, 9, 10, 11 15” 22 mil,
7-7.5, 8-8.5, 9-9.5, 10, 11
18” 22 mil,
7-7.5, 8-8.5, 9-9.5, 10, 11
$1.58
$1.85
$1.36
$1.59
$1.82
$1.56
$6.30
$8.83
Phone: 800-MALLORY
$5.40
$7.57
PowerCoat Nitrile-Coated Gloves
Provides excellent chemical and compound resistance while allowing the
ultimate flexibility and dexterity. Superior protection against punctures,
cuts, and abrasion make these the optimum choice for the toughest
industrial jobs, including chemical handling, auto assembly, petro-chemical refining, degreasing and food processing. Supported, 26” medium
weight., nitrile, yellow, elastic cuff, with rough grip.
Sold per pair. Please Specify Size:M, L, XL
Item
Description
1-11
12+
722
26” PowerCoat Nitrile Gloves
$10.82
$9.75
Fax: 360-577-4244
WWW.MALLORYCO.COM
133
GLOVES – CHEMICAL RESISTANT NITRILE
AquaKnight® Gloves
POLY / COTTON – GLOVES
String Knit Gloves
Cotton/polyester blend provides comfort
and warmth. Allows manual dexterity.
Use as a glove or glove liners.
String Knits
Sold by the Dozen or 25 dz/case.
Please Specify Size: S, M, L, XL
•
•
•
•
•
Reversible pattern
Provides comfort and warmth
Use as gloves or glove liners
Color-coded hem to identify sizes
Refrigerated areas, food processing, general maintenance, parts handling, shipping / receiving and
automotive plants.
Sold per dozen. Please Specify Size: XS, S, M, L
Item
Description/Size
1-11 dz.
9500
9636LM
9638LM
Cotton/Poly, Regular Weight
Economy Weight
Light Weight
$5.16
$3.00
$2.82
12+
$5.04
$2.88
$2.70
Wool Knit Liner
Item
Description
1-11 dz.
9616
100% Acrylic-White
$7.72
12+
$7.40
Standard-weight wool/acrylic blend liner.
Wool provides warmth, and acrylic ensures
comfort. 4” thermal cuff keeps out cold.
Sold per pair or 144/case. Sizes: Men’s
Item
Parade Gloves
These 100% white cotton gloves are excellent for handling electronics components.
Snug fitting for good dexterity. Made with
three lines of raised stitching on the back. Slip-on
style.
Description
100WMNZ Parade Gloves 1-11
12+
$1.95
$1.85
Thermastat™ Gloves
Sold per dozen. Please Specify Size: S, M, L
Item
Description
WK18ATC Wool Knit Liner
1-11 dz.
$10.36
12+
$8.93
Inspector Gloves
•
•
•
•
•
Dupont’s hollow-core hydrophobic polyester
Greater thermal insulation
Fastest evaporation rate of moisture
Extra softness for non-chafing comfort
Made with FDA-accepted materials for use in
food processing applications
• Machine wash and dry
• Reversible pattern
• Utilities, poultry, beef and pork processing, refrigerated warehousing,
commercial fishing and commercial landscaping.
Sold per pair or 300/case. One size fits all.
Extremely lightweight 100% cotton
inspector’s glove. Comfortable and crisp
looking. Reversible pattern allows longer
wear. Unhemmed.
Sold per dozen. Size: Men’s only.
Item
Description
1-11 dz.
8600CM
Inspector Gloves
$3.95
Item
Description
1-11
12+
9620
9622
100% Acrylic - White
100% Acrylic - Blue
$2.89
$3.24
$2.77
$3.11
12+
$3.80
ThermaKnit™ Insulator®
Lightweight Thermastat Fibers
The Insulator is made of Dupont®-certified
Thermastat fast-wicking fibers. These unique
fibers act as a hand warmer for use in cold and damp working environments. Used as a liner under gloves, the Insulator is perfect anywhere
hands are subjected to cold, damp conditions.
• Ideal for: utilities, handling chilled or refrigerated products, fishing
industry, construction, general maintenance
Winter Liner
Heavy string knit, nylon and polypropylene blend, ambidextrous pattern
for double wear. Large size fits most
men, Small size fits most women.
Retains wicking action of pure polypropylene, yet lasts longer.
Sold per pair.
Sold per dozen. Please Specify Size: S, M, L, XL
Item
Description
1-11 dz.
3272
Winter Liner, White
$11.52
12+
$9.84
Item
Description
1-11
12+
78-101
78-150
Blue Insulator- One Size Fits All
White Insulator- One Size Fits All
$3.09
$2.80
$2.64
$2.40
WickDry® Thermo-O-Liner
Ultra light weight
WickDry® moves the moisture away and
keeps hands dry under the most strenuous conditions. Plus the added benefit of
Thermolite® gives thermal insulation and
additional wicking away of moisture, blended with Lycra® for a smooth
form fit.
Cotton Liners
100% cotton multi purpose liners.
Sold per dozen, 120/case. Size: L. Color: Natural.
Item
Description
1-5 dz.
72223
Large Cotton Liners - 12 doz $5.52
134
Phone: 800-MALLORY
6+
Sold per pair. Please Specify Size: S, M, L
$4.97
Fax: 360-577-4244
Item
Description
1-11
12+
9995
Glove liner
$10.50
$9.35
WWW.MALLORYCO.COM
Brown Jersey
7800
7100
Red Head Cotton Glove
Sold by the Dozen or 25dz/case.
Item
Description
1-11 dz.
7100
7102
7800
7802
Men’s Brown Jersey
Ladies Brown Jersey
Men’s Brown Jersey with dots
Ladies Brown Jersey with dots
$5.85
$5.85
$8.34
$8.34
12+
• Double palm canvas
• Fourchette styles provide the best fit of any
heavy fabric glove
• Multi-purpose gloves used for light protection in warehousing, farming and logging applications
Sold per pair or 120/case. Please Specify Size: S, M, L, XL
$5.60
$5.60
$8.00
$8.00
Item
Description
1-11
12+
920
920E
No Band
Elastic Band
$1.53
$1.58
$1.32
$1.36
Quality Cotton Gloves!
Red Knit Wrist
Available in a sturdy 12 oz cotton with a red
knit wrist. Great for warm working environments where perspiration could interfere with
glove quality and effectiveness.
Felt-Lined Jersey Glove
Brown jersey driver’s style glove with red
felt lining. Slip-on cuff. Gunn pattern with
straight thumb. Very comfortable.
Sold per pair or 144/case.
Sold by the Dozen or 25dz/case. Size: One size fits most
Item
Description
1-11 dz.
7900
Felt Jersey
$11.52
12+
$11.04
Canvas Gloves
The most economical, general-use canvas
glove available! These 8- and 12-ounce gloves
are a standard in any industry. Good quality
and value.
8110
Sold by the Dozen. Men’s sizes.
Item
Description
1-11 dz.
8110
8300C
2410G
8 oz 12 oz
12 oz, Knit Wrist $5.76
$11.28
$33.72
12+
$4.80
$10.20
$28.56
Item
Description
1-11
12+
125 12 oz. (red)
$1.74
$1.70
WHITE OX
1014
Near-leather hand safety for the
price of canvas!
The glove every logger and woodsman
has known for over 60 years. 100%
cotton; fourchette pattern (the most
comfortable of glove patterns, usually
only found in dress styles); double ply
quilted palm equates to construction
from canvas of 22-ounce thickness; 10ounce canvas smooth back; knitwrist.
Fuzzy nap both inside and outside.
Reconfigured index finger seam gives
same protection as wrap around
construction.
Snug fit has the effect of reducing size
by approximately 1/2 size.
Gauntlet version has 5” rubberized
canvas sleeve. Fast red dye for printing does not bleed.
1015
1016
Sold per pair or 120/case.
Lucky Logger
A true 26-ounce cotton glove!
Shop and compare, most logger’s
gloves are made with two 11ounce layers, but the Lucky
Logger was designed with a
full 18-ounce outer layer on
the palm and grip, (extra
thickness where you need
it most) and an 8-ounce
inner layer. Built to give
you almost twice the wear at a very reasonable price. Extra features include a generous full cut and knuckle strap
for added protection. Lucky Lites have the same great design as Lucky
Logger, but with a 10-ounce outer layer on palm and grip.
Sold per pair or 72/case.
Item
Description
1-11
12+
4814
4810
Lucky Logger
Lucky Lites
$2.59
$2.48
$2.53
$2.42
Phone: 800-MALLORY
Item
Description
1-11
12+
1014
1014M
1015
1016
Original
Snug Fit
Gauntlet
Original with elastic
$4.14
$4.14
$5.52
$4.41
$3.50
$3.50
$4.67
$3.74
Heavyweight .
Hot Mill with Burlap .
Lining (4564ML)
•
•
•
•
•
Straight thumb
Nap-out cotton canvas
Knuckle strap
Burlap liner for extra heat insulation
Clute pattern
Sold per pair or 144/case.
Item
Description
1-11 12+
9132G
Heavy Weight Gloves
$1.70
$1.44
Fax: 360-577-4244
WWW.MALLORYCO.COM
135
GLOVES – COTTON
You won’t find a warmer or
more comfortable jersey glove
for such an economical price!
Men’s and Ladies’ sizes. Available with or without dots,
for extra gripping power and
convenience.
COTTON • Coated COTTON – GLOVES
Badger Paw® Grip with Dots
Gold Chore Gloves
Great comfort at an affordable price! These
16-ounce double palm gloves with nap exposed are durable and they feel great to wear.
Sold by the Dozen or 144/case.
Item
Description
1-11 dz.
8516
Gold Chore Gloves
$14.52
12+
$12.24
Designed for use in high abrasion areas where
the flexibility and breath ability of machine
knit gloves. Seamless inner layer of cotton
provides hand comfort and wicks perspiration
away. Fingertips are reinforced. Excellent replacement for leather palm
gloves being used in general industrial applications. Applications include
general maintenance, handling cartons, metal parts, or small castings.
Sold by the Dozen or 72/case. Please Specify Size: S, M, L, XL
Item
Description
1-11 dz.
9205
Heavy Weight $28.56
12+
$26.40
Black Dot Gloves
Plastic dot coatings on the palms of these
10 ounce gloves provide great gripping
power for using hand tools and for similar
applications.
Two-Sided Dot Gloves
Sold by the Dozen or 25 dz/case.
Item
Description
1-11 dz.
8800
Black Dot Gloves
$8.76
12+
$7.32
• Coated with PVC dots on two sides
• Color-coded hem to identify sizes
• Ideal for: automotive plants, material handling, bottling industries, package handling,
farm and gardening
Sold by the Dozen or 25 dz/case. Please Specify Size: S. M, L, XL. Gray in Small or
Large only.
Item
Description
9660
2 sided, Natural
9662SM/LM2 sided, Gray, S or L only
9670LM/SMGray cotton-poly
Performers Extra™ Unique coating processes provide sure gripping ability and excellent abrasion resistance
for gloves that are comfortably pliable
and reduce hand, arm and back fatigue.
Double-side brown dot coating over cotton.
Ambidextrous for added wearability.
1-11 dz.
$10.08
$6.60
$7.56
12+
$8.40
$5.52
$6.36
Single-Side Dot Gloves, Coated with dots on one side
Sold by the Dozen or 20 dz/case. Please Specify Size: S, M, L, XL
Item
Description
1-11 dz.
9650
Regular Weight - White
$8.16
12+
$6.80
Sold by the Dozen or 144/case. Please Specify Size: Men’s, Ladies’, Jumbo, Youth
Item
Description
1-11 dz.
CD5AR
Standard Weight $11.40
12+
$10.20
Honey Grip Glove
• Criss cross pattern - Seamless Knit
• Designed for excellent dexterity and gripping power.
• Coated with PVC in honeycomb pattern and can be
used for Material handling, roofing, bottling, and more.
Sold per dozen, 120/case. Sizes M-XL. Color:Golden yellow.
Brown Dot Gloves
Very popular in shake mills, this cotton/
synthetic knit glove with brown dots on
both sides is comfortable and durable.
Item
Description
1-5 dz.
63330
Honey Comb Gripper
$17.86
6+
$16.07
Sold by the Dozen or 25 dz/case.
Item
Description/Size
1-11 dz.
9660LD
9660SD
Brown Dot, Large
Brown Dot, Small
$6.24
$6.24
12+
$5.28
$5.28
Gray Soft Duralon® .
with Badger Paw® Grip
Item
9675
Description
1-11 dz.
Honey Grip
$14.04
12+
$13.44
Liberty Golden Gripper
50/50 polyester/acrylic knit glove with PVC
overlay on both sides. Coated thumb crotch and
fingertips. Reversible pattern; fits either hand.
Sold by the Dozen.
Sold by the Dozen or 72/case. Please Specify Size: S, M, L, XL
Item
Description
1-11 dz.
8605
Single-side dotted
$20.76
Phone: 800-MALLORY
• Multi-purpose, reversible pattern glove features a heavy weight, seamless construction
• Coated with uncured PVC in a honeycomb pattern for
tackiness
• Material handling, roofing, bottling, farm and gardening industries.
Sold by the Dozen. Please Specify Size: S. M, L, XL
Special soft Duralon yarn stretches across
the hand for an exact fit without compromising hand comfort. Microdots protect
13 gauge knit fabric from abrasive objects, yet are small enough that they
do not interfere with hand sensitivity to touch or feel. Breathable Duralon
knit keeps hands cool in summer and warm in winter. Applications include light assembly where dexterity and manual sensitivity are desirable.
Excellent for shipping and receiving departments that handle cartons and
must enter data on keypads.
136
Honey Grip®
12+
$19.08
Fax: 360-577-4244
Item
Description
PNV104
Golden Gripper PVC Criss Cross $11.28
WWW.MALLORYCO.COM
1-11 dz.
12+
$9.24
Offer extreme comfort and sensitivity with lint-free
polyamide knit liner and smooth grip, Nitrile foam
coated fingertips and palm. The cellular structure
of the Nitrile foam extracts perspiration for
optimum comfort.
Nitrile foam coated palmside and fingertips
offer excellent anti-slip grip, abrasion resistance
and smudge-free parts handling. Polyamide liner
is 280-denier stretch knit for ultimate elasticity, breathable comfort and
good durability.
Hand specific design in 5 sizes for optimum fit. Launderable. Medium
Weight and Color: Gray knit wrist w/green.
• Applications: Assembling Mechanical Components, Small Gearing,
Nuts, Bolts, Fastenings, Precision Assembly
Sizes: 6-10. Sold per pair, 100 pairs per case.
Item
Description
Price
55441
554 Ultrane
$2.43
562 ULTRANE Grip gloves
Feature an expanded contact area for exceptional abrasion resistance and improved grip
particularly in wet applications. Medium thickness, good general purpose glove. Knit wrist,
with raised dots for dependable grip.
Reinforced raised dot Nitrile foam finish on palmside
and fingers (including knuckles) offer excellent anti-slip
grip, abrasion resistance parts handling.
Polyamide liner is 280-denier stretch knit for ultimate elasticity, breathable comfort and good durability.
Hand specific design in 5 sizes for optimum fit. Launderable. Color: Gray
w/Black.
• Applications: Precision Mechanics with dry or slightly wet (oily) applications, Sorting Mechanical Parts.
Maxx-Grip Glove
Rubber Coated - Seamless Knit
Good general purpose glove with triple
dipped palms.
• Textured rubber grip over seamless poly/
cotton knit
• Breathable stretch knit wrist and back for
comfort
• Contour fit for excellent dexterity and gripping
power
• Rubber palm for puncture, wear and liquid protection
• Machine Washable
Sold per dozen, 72/case. Sizes: S-XL.
Item
Description
1-5
73349
73347
Black Maxx Grip Blue Maxx Grip
$22.08
$22.08
6+
$19.87
$19.87
Thermo Mega-Grip Glove
Rubber-Coated - Insulated - Seamless Knit
Warm cotton knit glove with triple dipped palms.
• Textured rubber grip over seamless warm cotton knit
• Breathable stretch knit wrist and back for comfort
• Contour fit for excellent dexterity and gripping power
• Rubber palm for puncture, wear and liquid protection
• Ideal for cold weather or padded glove applications
• Machine Washable
Sold per dozen, 120/case. Sizes: S-XL.
Item
Description
1-5
73373
Black & Gray
$34.80
6+
$31.32
Sold per pair, 100 pairs per case.
Item
Description
Price
56241
562 Ultrane
$3.03
Nitri-Dex Glove
Nitrile Coated - Seamless Knit
Contour fit for excellent dexterity
and gripping power.
• Textured nitrile palm over seamless nylon knit
• Breathable stretch knit wrist and
back for comfort
• Contour fit for excellent dexterity
and gripping power
• Nitrile palm for puncture, wear and liquid protection
• Machine Washable
ULTRANE 548
Black Nylon knitted gloves with palm and fingers
coated with black polyurethane foam. Curved fingers
and contoured palm.
Guaranteed silicone-free. Elastic knitted wrist (natural
rubber elastic wrist band). Textured external surface.
Excellent abrasion resistance, comfortable seamless knit
liner.
• Applications: Intricate assembly work, sorting small
components, handling microprocessors, electronics.
Sold per dozen, 120/case. Sizes S-L. Color-Sage Green & Gray or Black & Gray
Sizes S-XXL. Different color cuff for each size. Sold per pair, 98 pairs per case.
Item
Description
Price
54839
548 Ultrane
$1.65
Phone: 800-MALLORY
Item
Description
1-5
73376
73361
Black & Gray
Sage Green & Gray
$22.80
$22.80
Fax: 360-577-4244
WWW.MALLORYCO.COM
6+
$20.52
$20.52
137
GLOVES – COATED COTTON
554 ULTRANE gloves
Coated COTTON – GLOVES
These gloves fit comfortably on relaxed hands. Flexible coatings allow
freedom of movement and reduce hand fatigue. The knit liners are seamless - no lumps or seams to rub and irritate hands. The materials and
production techniques give an outstanding grip, comfort, and flexibility.
Atlas Gloves offer superior hand protection for every job.
All Atlas gloves are machine washable.
300 Original Latex Palm
The original has all the proven design and
quality features - ergonomic fit, outstanding
grip, wet or dry. Available in a wide variety
of sizes to ensure a comfortable fit for
everyone.
300-I ThermaFit™
Thick napped liner for comfort &
warmth! The ThermaFit is a truly durable, comfortable
work glove. The thick poly cotton/acrylic liner uses a revolutionary napping process to cushion and keep hands
warm while allowing maximum flexibility and comfort.
Specially textured palm provides a great grip, and the
ergonomic design reduces hand fatigue.
350 NitrileFit™
Increased puncture and abrasion resistance.
The same ergonomic design and superior fit
found in this Atlas 300 with the added protection of nitrile palm coating. Specially formulated
nitrile coating provides increased puncture and
abrasion resistance with excellent grip. Grease
and oil resistant palm and fingertips.
370 Nitrile Tough™
Tough and durable lightweight gloves. The flexible nitrile coating is tougher than rubber,
protecting palms and fingertips from
the rigors of every day work. Seamless
lightweight black nylon knit liner increases
comfort while it repels dirt and stains.
Ideal for jobs requiring maximum dexterity
and freedom of hand movement without
the fatigue associated with heavier, bulkier
gloves.
Sold per pair or 144/case. Please Specify Size: S,
M, L, XL
Item
Description/Color
1-11
12-71 72+
300
300I
350
370
Original Latex Palm, Blue
Thermal Latex Palm, Gray
Nitrile Palm, Green
Nitrile Palm, Gray
$3.50
$3.80
$3.79
$3.90
$3.30
$3.50
$3.38
$3.49
$2.85
$3.00
$3.01
$3.12
Rubber
Dipped Knit Glove
Black poly/cotton knit shell is comfortable and breathable for extended wear. Dipped,
natural-rubber coating aids in abrasion and puncture
resistance. Outstanding grip in both wet and dry applications. Sewn-on Harley-Davidson® Bar and Shield logo patch.
Sold per pair. Please Specify Size: S, ML and XL
©2006 H-D, All rights reserved. Manufactured by Bacou-Dalloz under license
from Harley-Davidson Motor Company. Not intended for use when riding a motorcycle. Improper use may result in serious personal injury or death.
Item
Description
1-11
12+
HDG200
Black poly
$3.60
$2.52
Flex-Tuff®
Latex Dipped String Gloves
• Maximum flexibility for comfort and fit
• Natural rubber provides abrasion resistance
• Textured palm dip for extra grip and
durability
• Material handling, glass handling operations, fishing and plywood
industries, sanitation, general maintenance.
Sold per pair or 144/case. Please Specify Size: S, M, L S, M, L, XL
Item
Description
1-11
12+
9680
Blue Latex palm & fingers
$3.04
$2.92
Economy Flex-Tuff® II Latex
Dipped String Gloves
• Latex dipped strings & cotton/polyester shell
• Textured latex palm dip
Sold per pair or 144/case. Please Specify Size: S, M, L, XL
Item
Description
1-11
12+
9688
Gray Textured Latex palm dip
$1.65
$1.58
Skinny Dip®
Seamfree cotton/poly shell with wrinkle
finish flat dipped natural-rubber coating.
Truly outstanding dexterity, and greater
comfort with the added benefit of an ergonomic design. This general-purpose glove
can be used in most applications. Wrinkle
finish, flat dipped natural rubber, knitwrist, cotton/poly shell.
Economy Latex Palm
Sold per pair. Please Specify Size: S, M, L S, M, L, XL
Item
Description
1-11
12-71 72+
3811
Skinny Dip
$2.06
$1.96
138
Phone: 800-MALLORY
• Cotton/Polyester shell
• Choose from 10 or 13 gauge weights
• Palm and fingers dipped for greater durability
Sold per pair or 240/case
$1.65
Fax: 360-577-4244
Item
Description
1-11
12+
9681
9682
Green 10 Gauge
Blue 13 Gauge
$0.80
$0.98
$0.77
$0.94
WWW.MALLORYCO.COM
UltraTech™ Work Gloves
•
•
•
•
•
•
Innovative Purple Nitrile gloves deliver
25% better productivity versus leather
for general-purpose use. Exclusive nitrile
foam coating provides the highest abrasion
resistance rating.
Perfect for small parts assembly, auto
assembly, materials handling, warehouse
activities and general maintenance.
• Seamless knit nylon liner improves dexterity
• Abrasion resistance rating of 4 (EN Standards)
• Excellent dexterity
• Black & purple color hides oil and dirt
Good to excellent tactile sensitivity
Excellent comfort and fit
Cut and abrasion resistance
100% nylon shell
Polyurethane palm and fingers dip
Ideal for: assembly, low lint protection, manufacturing, small parts
handling, general purpose
Sold per pair or 144/case. Please Specify Size: S, M, L XS, S, M, L, XL
Item
Description
1-11
12+
9696
Gray Polyurethane $2.87
$2.75
Sold per pair.
Item
Purple Nitrile
1-11
12+
40225
40226
40227
40228
40229
Size 7 (S)
Size 8 (M)
Size 9 (L)
Size 10 (XL)
Size 11 (XXL)
$3.45
$3.45
$3.45
$3.45
$3.45
$3.17
$3.17
$3.17
$3.17
$3.17
HyFlex® Foam gloves
The outstanding oil grip you need with the
increased comfort you want.
• The dark foam nitrile coating effectively hides soil,
lengthening the time between glove replacements.
Perfect for any job requiring workers to handle
small, oily parts.
Sold per pair or by 72/case. Available in sizes: 6, 7, 8, 9, 10,
and 11.
G40 Latex Coated® Gloves
Designed for excellent durability in the
work environment, these general-purpose
poly-cotton latex-coated gloves are processed to yield lower latex proteins. An excellent value, they offer good grip and great
comfort and dexterity. They excel at use in
masonry, general maintenance, materials
handling, warehousing and shipping.
Item
Description
1-11
12+
11-800
11-801
HyFlex Gray Foam Nitrile Gloves $4.28
HyFlex Black Foam Nitrile Gloves $4.28
$3.67
$3.67
HyFlex® Lite
Sold per pair.
Item
Gray-Black Latex
1-11
12+
97270
97271
97272
97273
97274
Size 7 (S)
Size 8 (M)
Size 9 (L)
Size 10 (XL)
Size 11 (XXL)
$2.33
$2.33
$2.33
$2.33
$2.33
$2.14
$2.14
$2.14
$2.14
$2.14
PowerFlex®
Where dexterity is the key factor, HyFlex Lite is the
perfect choice. Ideal for the electronics industry, and
computer assembly.
Sold per pair or by 72/case. Available in sizes: 6, 7, 8, 9., 10
Item
Description
1-11
12+
11-600
HyFlex® Lite Gloves
$2.63
$2.26
Hynit®
Cut-, Abrasion-, and Puncture-Resistant; Poly/Cotton
Knit Liner
The Quality Choice in Light- to Medium-Duty Gloves
PowerFlex gloves provide a combination of cut,
abrasion, and puncture resistance; superior wet and
dry grip; and unbelievable comfort. The gloves are
ergonomically designed with a soft gray; seamless poly/
cotton knit liner that’s palm-dipped with a textured,
natural rubber coating. The uncoated back allows air to
circulate, which keeps hands cooler and drier, and the fully coated thumb
provides added protection in this high-risk area.
• Ideal for: general maintenance, shipping & receiving, assembly, concrete & brick handling and lumber handling
Sold per pair. Please Specify Size: 7 (XS), 8 (S), 8.5 (M), 9 (L), 10 (XL)
Caution: This product contains natural rubber latex, which may cause allergic
reactions in some individuals.
Item
Description
1-11
12+
80-100 Seamless poly/cotton knit lining; dipped in
textured natural rubber $2.77
$2.37
Phone: 800-MALLORY
Knit-Lined, Dipped, Color-Coded Cuff
A comfortable, longwearing replacement for cotton or
leather gloves. Made from a longwearing nitrile-impregnated fabric, which provides excellent snag, puncture,
abrasion, and cut resistance. Hynit gloves outwear
8-ounce cotton by as much as 10 to 1, goatskin by 3 to
1, and light leather by 4 to 1. The gloves feature superior
dry grip, no silicone, and are light and comfortable to wear. Fully launderable, with color-coded cuffs to simplify sorting and storage.
•General plant use • Assembly and inspection • Receiving • Light-to-medium fabrication • Materials handling.
Sold per pair or 144/case. Please Specify Size: 6.5 (Women’s S), 7 (Women’s M),
7.5 (Women’s L), 8 (Men’s M), 9 (Men’s L), 10 (Men’s XL)
Item
Description
1-11
12+
32-105
32-125
32-135
Slip-on
Perforated Back Panel - Slip-on Nylon Mesh Back - Slip-on $2.47
$2.59
$2.75
$2.11
$2.21
$2.35
Fax: 360-577-4244
WWW.MALLORYCO.COM
139
GLOVES – Coated COTTON
G40 Purple Nitrile® Foam
Coated Gloves
Coated COTTON – GLOVES
Palm-Coated Heavy Nitrile
Driver’s style glove. Features an elastic, striped
back to provide excellent cut, puncture, snag
and abrasion resistance. Suggested applications:
metal fabricating and grinding, or handling
abrasives.
Nitri-Pro™ Gloves
Sold per pair or by 72/case.
Please Specify Size: S, M, L, XL
Supported Nitrile
Nitri-Pro is an economical replacement for
heavy-duty leather palm work gloves, and is
available rough finished for a good wet grip
and extra wear or smooth finished for a good
dry grip and more flexibility. Features triplelayer foam insulation. Suggested applications:
handling rough castings, cores, extrusions,
tubular steel, sheet metal, fabricated metal, lumber, plywood, drywall,
concrete blocks, bricks, and general building materials. 21CFR, 170-199
compliant.
Sold per pair or by 72/case. Please Specify Size: S, M, L.
Item 7066R available in M, L only.
Item
Description
1-11
12+
7066
7066R
Smooth Palm, Safety Cuff
Rough Palm
$4.25
$4.25
$3.49
$3.49
Item
Description
1-11
12+
9740
Heavy Nitrile, jersey-lined driver
$5.35
$5.12
Nitty Gritty™ Gloves
The most cut resistant, comfortable, premium value glove of its class. Multi-dipped,
premium natural-rubber coating gives you
superior cut, abrasion, snag and puncture
resistance and extended wear. Suggested
applications: sharp edged objects, like glass,
sheet metal, scrap metal or tin plate, slippery or smooth materials, or abrasive objects like lumber, tile, concrete
blocks and brick. 21CFR, 170-199 compliant.
Sold per pair or by 72/case.
Item
Predalite®
Lightweight Nitrile
Description/Size
1-11
12+
$4.40
$5.17
$5.92
$6.38
$4.40
$4.40
$4.70
$3.62
$4.25
$4.86
$5.25
$3.62
$3.62
$3.86
Wrinkle Finish
63NFW
64NFW
65NFW
67NFW
63PNFW
L63PNFW
66NFW
Lightweight nitrile (NBR) rubber coating for cut, abrasion, snag and puncture
resistance. Thinner coating on 100% cotton
interlock lining for a greater sense of touch
and dexterity. Palm-coated with knit
wrist.
• Ideal for: light to medium fabrication,
material handling, and maintenance.
Knit Wrist, Fully Coated, Large
10” Gauntlet, Fully Coated, Large
12” Gauntlet, Fully Coated, Large
14” Gauntlet, Fully Coated, Large
Knit Wrist, Palm Coated, Large
Knit Wrist,Palm Coated, Small
Safety Cuff, Palm Coated, Large
Sold per pair or by 72/case. Please Specify Size: XS, S, M, L, XL
Item
Description
1-11
12+
9780
LightWeight, Knit Wrist
$2.23
$2.14
• Rough-textured natural-rubber coating
for greater gripping power and a higher
degree of cut resistance
• Crinkle finish
• Ideal for: handling of sharp-edged materials
such as glass or metal, or highly abrasive items,
such as concrete blocks or lumber.
Hylite
Ruggedness and Comfort for
Medium-Duty Applications
Sold per pair or by 72/case. Size: Men’s Large
Hylite combines the comfort of a cotton lining and the
exceptional snag, puncture, abrasion, and cut resistance
of a nitrile coating in a medium-duty glove. The glove
is a better alternative to cotton, light- to medium-duty
leather, and PVC. For extra comfort, Hylite features an
interlock knit lining, generous sizing, and a contoured design. Hylite
gloves outwear cotton up to 12 to 1, light leather 5 to 1, and PVC-coated
gloves 3 to 1.
• Ideal for: assembly, inspection, medium-duty material handling, light
fabrication, shipping and receiving and maintenance
Sold per pair. Please Specify Size: 7 (XS), 8 (S), 8.5 (M), 9 (L), 10 (XL)
Item
Description
1-11
12+
47-400
47-402
47-409
Palm coated, knitwrist
Fully coated, knitwrist
Fully coated, 4” w/ nitrile cuff
$3.34
$3.42
$4.10
$2.86
$2.93
$3.51
140
Phone: 800-MALLORY
TuffTex® Work Gloves
Item
Description
1-11
12+
6820 6845
Cotton Canvas Shell 12” Gauntlet $3.52
$2.66
$3.38
$2.55
Whizz-knit™
Seamless knit liner supported vinyl coated
gloves
Porous textured coating for breathability and
easy gripping. Minimizes absorption of water,
oil and grease. Versatile glove for hand protection in small parts handling, construction, electronics
assembly, shipping, receiving, assembly, maintenance, light fabrication,
inspection and packaging.
Sold per pair or 120/case. Please Specify Size: XS, S, M, L
Fax: 360-577-4244
Item
Description
1-11
12+
9891
Whizz-knit™
$2.34
$2.24
WWW.MALLORYCO.COM