1. No category

Logical Access
How to Order Guide
D00538, Release C.3
February 2013
The most current version of this document is available for download at:
http://www.hidglobal.com/documents//LogicalAccess_htog_en.pdf
Register and check your order status by going to
www.hidglobal.com/order
This document is subject to change without notice.
HID, HID Global, iCLASS, iCLASS SE, Crescendo, naviGO, OMNIKEY, SIO, ActivIdentity, ActivClient, ActivID, pivCLASS, Indala are the
trademarks or registered trademarks of HID Global Corporation, or its licensors, in the U.S. and other countries.
MIFARE, MIFARE DESFire, MIFARE Classic, MIFARE DESFire and MIFARE DESFire EV1 are trademarks or registered
trademarks of NXP B.V. and are used under license.
Date
Author
Description
Version
02/05/13
SA / JA /
TM
C.3
10/11/12
09/24/12
08/20/12
JA
TM
SA / JA
07/11/12
05/07/12
04/06/12
TM
SA
SA / TM
03/28/12
12/05/11
TM / SA
TM
Added pivCLASS smart card + fix issue on 1457 and 1437/1447, add EV1
option for 1457 and 1456. Added 5021 CL Dark Blue Reader; refined reader
accessory section.
Removed naviGO 2.0 and content now found at HID Identity Assurance
Changed 5427 CK Part Number to R54270001
Added Crescendo C1150 options. Added naviGO 2.0 discontinued statement.
Added OMNIKEY 5427CK; removed OMNIKEY5127CK
Added OMNIKEY 5021 CL
Finalize C1100 options
Add SE options for C1100, C800 and C200/C700 as well as Embeddable for
Dual HF card (MIFARE + DESFire). Removed OMNIKEY Reader Packs.
Added 5321 PAY, 5127 CK, 4121 USB, 5326 DFR and Crescendo C1100
Added 3121 USB (w/ Heavy Base), 2061 Bluetooth, 3621 USB PINPAD,
Heavy Standing Base 31xx.
Modified 3821 USB PINPAD, 3921 (USB), 5321 CR (V2)
Added OMNIKEY Customization Program Order Form
Added new part number for multi-technology Credentials 243, 263
C.2
C.1
C.0
B.9
B.8
B.7
B.6
B.5
Logical Access How to Order Guide – D00538, C.3
Contents
Overview ........................................................................................................................................ 3
Cards ...................................................................................................................................................... 3
Readers .................................................................................................................................................. 4
Basics of Ordering Cards ............................................................................................................ 5
Cards .............................................................................................................................................. 6
Contact and Contactless Combo Cards .................................................................................................. 6
Dual Interface Cards ............................................................................................................................. 12
Embeddable Contactless Cards ............................................................................................................ 13
Card Packages ............................................................................................................................ 25
Crescendo Evaluation Kit ...................................................................................................................... 26
Desktop Smartcard Readers ..................................................................................................... 27
Reader Ordering Guide ......................................................................................................................... 27
OMNIKEY Customization Program ....................................................................................................... 30
Appendix ...................................................................................................................................... 33
Custom Cards ....................................................................................................................................... 33
Identity and Access Management Evaluation Kit Questionnaire ........................................................... 37
Page 2 of 39
© 2010 - 2013 HID Global Corporation. All rights reserved.
February 2013
Logical Access How to Order Guide – D00538, C.3
Overview
HID Global offers a variety of logical access and converged solutions, enabled by the use of a single credential for
both physical and logical access. HID’s primary product lines making up this solution include
• Hardware components: iCLASS®, iCLASS SE®, Crescendo® and OMNIKEY®
• Software components: HID Identity Assurance product portfolio including naviGO®, ActivClient™ and
ActivID® CMS.
No matter where you are in your efforts to improve risk management and physical/data security processes, there is
an HID solution to help you.
This How To Order Guide focuses on the hardware product lines described above. For the software components,
reference HID Identity Assurance: www.hidglobal.com/main/identity-assurance.html.
Visit www.hidglobal.com product section for more information.
Cards
Crescendo
A powerful embedded contact smart chip with cryptographic co-processor is used for logical, physical access control and
enables Crescendo to perform as a PKI card in both Microsoft® and heterogeneous IT environments. To meet the needs of
current physical access control customers, choose to customize Crescendo with the Physical Access Control technologies: Prox
(HID, Indala® and others), iCLASS®, MIFARE™, multi-technology combinations and magnetic stripe.
Crescendo smart cards are standards based.
They work with all PC/SC based smart card readers (including built-in readers in laptops) available on the market. In addition,
Crescendo smart cards are supported in many third party applications.
The Crescendo card is made of highly durable composite plastic. Customize Crescendo cards with pre-printed graphics and anticounterfeiting elements. Fully personalize Crescendo cards with variable data – photos, text and barcodes.
Crescendo products C200, C700, C800, C1100 and C1150 are optimized, tested and supported by the OMNIKEY Reader
product line.
Crescendo C200:
Includes a Smart Card mini-driver for use with Microsoft CryptoAPI compliant applications.
Available with iCLASS, MIFARE Classic, MIFARE DESFire and Prox (HID or Indala) as multitechnology cards.
Crescendo C700:
Includes middleware for use with PKCS#11 and Microsoft CryptoAPI compliant applications.
Available with iCLASS, MIFARE Classic, MIFARE DESFire and Prox (HID or Indala) as multitechnology cards.
Crescendo C800:
Smart Card solution for the ActivIdentity® ActivID® CMS Appliance.
Available with iCLASS, MIFARE Classic, MIFARE DESFire and Prox (HID or Indala) as multitechnology cards.
Crescendo C1100:
Smart Card solution for the ActivIdentity ActivID CMS (Software Version).
Available with iCLASS, MIFARE Classic, MIFARE DESFire and Prox (HID or Indala) as multitechnology cards.
Crescendo C1150:
Smart Card solution that includes a mini-driver for use with Microsoft CryptoAPI applications, as
well as ActivIdentity ActivClient.
Available with iCLASS, MIFARE Classic, MIFARE DESFire and Prox (HID or Indala) as multitechnology cards.
February 2013
© 2010 - 2013 HID Global Corporation. All rights reserved.
Page 3 of 39
Logical Access How to Order Guide – D00538, C.3
pivCLASS
The pivCLASS® credential is a dual interface smart card that addresses the growing demand for projects requiring FIPS 201
interoperability. As part of the pivCLASS portfolio, the card meets the specified US Government National Institute of Standards
and Technology (NIST) security requirements for delivering a reliable verification system. This system protects cardholder data
with a high assurance, public key infrastructure (PKI)-based solution.
The pivCLASS smart card is based on Personal Identity Verification (PIV) of US federal employees and contractors to meet the
challenges defined by PIV for strong security and reliability. Compared to the Crescendo card, this card is using a dual interface
chip (single chip running the same application for contact and contactless services).
This card provides superior security with the FIPS140-2 accreditation.
The pivCLASS card is available in three versions:
Traditional dual interface card
Dual interface card added with proximity interface
Dual interface card with iCLASS
iCLASS and iCLASS SE
Optimized to make physical access control more powerful, iCLASS 13.56 MHz read/write contactless smart card technology
provides versatile interoperability and supports multiple applications such as biometric authentication, cashless vending and
numerous other applications. iCLASS fully supports PC log on security as part of the HID’s iCLASS on the Desktop solution.
Prox
With over 200 million credentials in use around the world, HID is the market leader in contactless cards for access control. Our
global reputation for delivering quality, value, partnership, and service excellence to our customers is unsurpassed in the security
Industry. For security managers, dealers, integrators and OEMs, HID Prox cards are recognized as the industry standard for
physical access control. Featuring 125 kHz RFID technology HID Prox products are robust, affordable, and seamlessly integrate
with access control systems. HID Prox cards fully support PC log on security as part of the HID’s Prox on the Desktop solution.
Readers
The OMNIKEY Smart Card reader leverages HID industry-leadership in all forms of identity credentials to assist you in choosing
the right smart card reader for your solution.
OMNIKEY Smart Card Readers are PC-connected readers for contact-based and contactless smart cards. OMNIKEY Smart
Card Readers are available in various form factors (for example, desktop, laptop or mobile use), and connector type (for
example, serial or USB). In addition, drivers are available for operating system support.
In addition to the standard products, OMNIKEY Smart Card Readers have a defined set of customization options (for example,
customized housing colors, logo prints or labels). The customization options are described in this How To Order Guide.
Page 4 of 39
© 2010 - 2013 HID Global Corporation. All rights reserved.
February 2013
Logical Access How to Order Guide – D00538, C.3
Basics of Ordering Cards
Each part number consists of a base number to indicate the type of credential, and a number or letter to indicate each credential
option. Each credential has a standard part number which includes default options, as indicated on the attached credential guides.
When an order is placed for a credential, the base number and all options must be specified. If you require any options that are
different from the default options, you must indicate those options when placing the order. Complete all part numbers for HID’s order
entry system acceptance.
Include the following information for all orders.
Reader Information
•
•
•
•
•
•
BASE MODEL NUMBER
STYLE
READ RANGE
TYPE
COLOR
OUTPUT FORMAT (reader’s format or format number must also be given at time of order)
Credential Information
Base Part Number (all Credentials listed are delivered with Composite 40% Polyester / 60% PVC for long life applications)
iCLASS Capacity Size and Allocation 0 – 2k Bits (256 Bytes) with 2 Application Areas
1 – 16k Bits (2k Bytes) with 2 Application Areas
2 – 16k Bits (2k Bytes) with 16 Application Areas
3 – 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 – 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Programming
Programming indicates whether the credential is programmed at the HID factory by you with an HID iCLASS card
programmer. If the credential is ordered non-programmed, an HID iCLASS card programmer must be used for programming.
(Contact an HID sales representative for iCLASS card programmer eligibility).
Second Contactless Technology Programming
H – HID Proximity (Specify Programming Information)
E – EM (Fixed sequential programming)
T – HITAG II (Programming not available)
D – Indala Proximity
C – Casi-Rusco Proximity (Fixed Sequential)
F – DESFire (Specify Programming)
M – MIFARE (Specify Programming)
MIFARE Capacity Size
•
MIFARE 1 K Bytes or 4 K Bytes
DESFire EV1 Capacity Size
•
8 K Bytes
Contact Chip and Embeddable Technology
•
Crescendo
o Crescendo C200 - For use with Microsoft Smart Card CSP and Smart Card KSP
o Crescendo C700 - For use in PKCS #11 and Microsoft CryptoAPI (CSP) environments
o Crescendo C800 - For use with HID ActivID Card Management System (CMS) Appliance
o Crescendo C1100 - For use with HID ActivID Card Management System (CMS): Software version
o Crescendo C1150 - For use with Microsoft Smart Card Base CSP and ActivIdentity ActivClient
•
pivCLASS - Dual interface smart card for FIPS201 deployments
•
Embeddable - Must specify contact chip required. Consult your account manager for current availability and contact
chip codes
Front Packaging - Indicates standard or custom artwork and type of finish.
Back Packaging - Indicates standard or custom artwork and type of finish.
iCLASS Credential Numbering - Internal 13.56 MHz programmed number and visible external credential number.
Slot Punch
Optional 125 kHz Proximity or Wiegand Credential Numbering - Internal 125 kHz Proximity or Wiegand programmed
number and visible external credential number.
Custom Artwork Credential Information
Custom Artwork Number (Call your Customer Service Representative for a custom artwork number.)
Credential Programming Information
Bit Format(s)
Facility Code(s)
Internal and External Start Numbers
Internal PIN Code (Length: 2 – 12 Digits)
SIO® (Secure Identity Object) or Standard programming
Any Special Instruction
February 2013
© 2010 - 2013 HID Global Corporation. All rights reserved.
Page 5 of 39
Logical Access How to Order Guide – D00538, C.3
Cards
Contact and Contactless Combo Cards
Crescendo credentials are designed for combined physical and logical access control. The Crescendo card is made of highly durable composite plastic and includes the contactless
and/or Prox technologies necessary to support your existing physical access control systems. Include Magnetic stripe technology and personalize Crescendo cards with a photo ID,
barcode or anti-counterfeiting element. Ensure to check each option with the appropriate values to fulfill a completed order form.
402 / 407 - Crescendo Ordering Guide for Microsoft CryptoAPI and PKCS#11
Base Model :
402 -- Crescendo C200
For use with Microsoft Smart Card CSP and Smart Card KSP1
407 -- Crescendo C700
For use in PKCS #11 and Microsoft CryptoAPI (CSP) environments1
Contactless Technology (Check One) Call HID Customer Service if requiring other technologies.
2 –13.56 MHz iCLASS 32 KB Only
4 – 13.56 MHz MIFARE Classic 4KB Only
6 – 13.56 MHz DESFire EV1 8KB Only
A – Combo 13.56 MHz iCLASS 32 KB and 125 kHz Prox (HID, Indala, or Casi)
C – Combo 13.56 MHz MIFARE 4KB and 125 kHz Prox (HID, Indala, or Casi)
G – Combo 13.56 MHz DESFire EV1 8KB and 125 kHz Prox (HID, Indala, or Casi)
F – Combo 13.56 MHz iCLASS 32KB and MIFARE 4KB
H – Combo 13.56 MHz iCLASS 32KB and DESFire EV1 8KB
J – Combo 13.56 MHz iCLASS 32KB and DESFire EV1 8KB and 125 kHz Prox (HID, Indala, or Casi)
T – Combo 13.56 MHz iCLASS 32KB and MIFARE 4KB and 125 kHz Prox (HID, Indala, or Casi)
Option - Magnetic Stripe
M - Standard Three Track High Coercivity Magstripe (ISO 7811-6)
Option – Secure Identity Object Programming
H – Programmed with Security Identity Object (SIO): Dual Payload Card
(Supports SIO as well as Standard data format)
P – Programmed with Security Identity Object (SIO)
Option - Custom Artwork 6
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
From the above options, enter your final card options. Examples: 407A and 4022M.
Final Part Number
-
(Options)
Configuration and Programming (required for order)
External Marking Technology (Check One)
Inkjet
Laser
iCLASS Memory Size and Allocation (Check One)
Not Applicable
16k Bits (2k Bytes) with 2 Application Areas
16k Bits (2k Bytes) with 16 Application Areas
Contactless Technology (Check One)
iCLASS
Not Applicable
Configured, Non-Programmed 2
32k Bits (4K Bytes) Application areas 16k/2+16k/1
32k Bits (4K Bytes) Application areas 16k/16+16k/1
Programmed (Specify Programming)
MIFARE Classic
Not Applicable
Non-Programmed 2.
Programmed MIFARE (Specify HID Format,
MIFARE only)
For information about MS CAPI and PKCS #11, visit
www.hidgobal.com/crescendo.
2 Non-programmed cards require field programming capability. Various solutions
are available to securely program credentials.
3 Any programming requiring custom keys or non-standard memory locations.
4 The Manufacturing Legend is required on all cards.
5 External Card Marking is used to trace manufacturing lots and provide readable
serialization.
6 Contact Customer Service for custom artwork number, lead-times, and cost.
7 Though most formats require two fields (site code and card number), use this
area for additional values if required by the format.
8 Laser marking may extend lead times.
1
Non-Programmed 2.
Programmed MIFARE
(Specify HID Format, MIFARE only)
MIFARE DESFire EV1
Not Applicable
Non-Programmed 2.
Custom Programmed, Specify Programming Information 3
125 kHz Prox
Not Applicable
Initialized, Non-Programmed 2.
Programmed HID Prox
Programmed Indala/Casi Prox
Programmed Other Prox
Programming Information
iCLASS
MIFARE or DESFire
125 kHz
Format (i.e. H10301)
Format (i.e. H10301)
Format (i.e. H10301)
Facility / Site Code
Additional Field Data7
Facility / Site Code
Additional Field Data7
Facility / Site Code
Additional Field Data7
Internal Card No. Start
External Card No.
External Start No.
Optional PIN:
Optional Elite Key:
Page 6 of 39
None
Matching
Internal Card No. Start
Random
External Card No.
Non-Matching
(If not Matching)
Sequential: Start #
Random:
Length
ICE #
External Start No.
None
Matching
Random
Non-Matching
(If not Matching)
Sequential: Start #
Random:
Length
© 2010 - 2013 HID Global Corporation. All rights reserved.
Internal Card No. Start
External Card No.
None
Matching
External Start No.
HID
Random
Non-Matching
(If not Matching)
Indala
Casi Compatible
February 2013
Logical Access How to Order Guide – D00538, C.3
408 - Crescendo Ordering Guide
Base Model :
408 -- Crescendo C800 – For ActivIdentity ActivID Card Management System Appliance.
Order minimum quantities of 100.
Contactless Technology (Check One). Call HID Customer Service if requiring other technologies.
0 – None - Contact only card (No physical access)
2 – 13.56 MHz iCLASS 32kb Only
4 – 13.56 MHz MIFARE Classic 4KB Only
6 – 13.56 MHz DESFire EV1 8KB Only
A – Multi-Tech 13.56 MHz iCLASS 32kb and 125 kHz Prox (HID, Indala, or Casi)
C – Multi-Tech 13.56 MHz MIFARE 4KB and 125 kHz Prox (HID, Indala, or Casi)
G – Multi-Tech 13.56 MHz DESFire EV1 8KB and Prox - 125 kHz HID
Option - Magnetic Stripe
M - Standard Three Track High Coercivity Magstripe (ISO 7811-6)
Option – Secure Identity Object Programming
H – Programmed with Security Identity Object (SIO): Dual Payload card
(Support SIO as well as Standard data format)
P – Programmed with Security Identity Object (SIO)
Option - Custom Artwork 6
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
From the above options, enter your final card options. Examples: 408A and 4086M.
Final Part Number
408
-
(Options)
Configuration and Programming (required for order)
External Marking Technology (Check One)
Inkjet
Laser 8
iCLASS Memory Size and Allocation (Check One)
Not Applicable
32k Bits (4K Bytes) Application areas 16k/16+16k/1
Contactless Technology (Check One)
iCLASS
Configured, Non-Programmed 2
Programmed (Specify Programming)
MIFARE Classic or DESFire EV1 Only
Programmed MIFARE (Specify HID Format, MIFARE only)
Non-Programmed 2
Custom Programmed, Specify Programming Information3
Combo iCLASS and Prox
Configured, Non-Programmed 2. iCLASS and Non-Programmed 2 125 kHz Prox.
Configured, Non-Programmed 2. iCLASS, Programmed 125 kHz Prox. (Specify Programming)
Programmed iCLASS and Non-Programmed 2 125 kHz Prox. (Specify Programming)
Programmed iCLASS and Programmed 125 kHz Prox. (Specify Programming)
For information about HID ActivID CMS appliance,
visit www.hidgobal.com/crescendo and www.actividentity.com.
2 Non-programmed cards require field programming capability. Various solutions are available
to securely program credentials.
3 Any programming requiring custom keys or non-standard memory locations.
4 The Manufacturing Legend is required on all cards.
5 External Card Marking is used to trace manufacturing lots and provide readable serialization.
6 Contact Customer Service for custom artwork number, lead-times, and cost.
7 Though most formats require two fields (site code and card number), use this area for
additional values if required by the format.
8 Laser marking may extend lead times.
1
Combo MIFARE and Prox or DESFire and Prox
Non-Programmed MIFARE or DESFire 2 and Non-Programmed 2 125 kHz Prox.
Non-Programmed MIFARE or DESFire 2 and Programmed 125 kHz Prox (Specify Programming)
Programmed MIFARE and Non-Programmed 2 125kHz Prox (Specify Programming)
Programmed MIFARE and Programmed 125kHz Prox (Specify Programming)
Custom Programmed MIFARE or DESFire and Non-Programmed2 125 kHz Prox
(Specify Programming)
Custom Programmed MIFARE or DESFire and Programmed 125kHz Prox (Specify Programming)
Programming Information
iCLASS
MIFARE or DESFire
Format (i.e. H10301)
125 kHz
Format (i.e. H10301)
Format (i.e. H10301)
Facility / Site Code
Facility / Site Code
Facility / Site Code
Additional Field Data7
Additional Field Data7
Additional Field Data7
Internal Card No. Start
External Card No.
External Start No.
Optional PIN:
Optional Elite Key:
February 2013
Internal Card No. Start
None
Matching
Random
External Card No.
Non-Matching
(If not Matching)
Sequential: Start #
Random:
Length
ICE #
External Start No.
Internal Card No. Start
None
Matching
Random
Non-Matching
(If not Matching)
Sequential:
Random:
External Card No.
External Start No.
Start #
Length
© 2010 - 2013 HID Global Corporation. All rights reserved.
None
Matching
Random
Non-Matching
(If not Matching)
HID Proximity
Page 7 of 39
Logical Access How to Order Guide – D00538, C.3
401100 - Crescendo Ordering Guide
Base Model :
401100 -- Crescendo C1100 – ActivIdentity ActivID CMS Software
Order minimum quantities of 25. Optionally, program the C1100 as an SR card (for example, both SIO + Standard format for backwards compatibility).
Contactless Technology (Check One). Call HID Customer Service if requiring other technologies.
0 – None - Contact only card (No physical access)
2 – 13.56 MHz iCLASS 32kb Only
4 – 13.56 MHz MIFARE 4KB Only
6 – 13.56 MHz DESFire EV1 8KB Only
A – Multi-Tech 13.56 MHz iCLASS 32 kb and 125 kHz Prox (HID, Indala, or Casi)
C – Multi-Tech 13.56 MHz MIFARE 4KB and 125 kHz Prox (HID, Indala, or Casi)
F – Multi-Tech 13.56 MHz iCLASS 32kb + MIFARE 4KB
G – Multi-Tech 13.56 MHz DESFire EV1 8KB and Prox - 125 kHz HID
H – Multi-Tech 13.56 MHz iCLASS 32kb + DESFire EV1 8KB
J – Multi-Tech 13.56 MHz iCLASS 32kb + DESFire EV1 8KB - 125 kHz HID
T – Multi-Tech 13.56 MHz iCLASS 32kb + MIFARE 4KB - 125 kHz HID
U – Multi-Tech 13.56 MHz MIFARE 4KB + DESFire EV1 8K
Option - Magnetic Stripe
M - Standard Three Track High Coercivity Magstripe (ISO 7811-6)
Option – Secure Identity Object Programming
H - Programmed with Security Identity Object (SIO): Dual Payload card
(Support SIO as well as Standard data format)
P - Programmed with Security Identity Object (SIO)
Option - Custom Artwork 6
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
From the above options, enter your final card options. Examples: 4011000 (for card without magnetic stripe
and no physical access technology) or 4011006M (for card with magnetic stripe and DESFire EV1 8KB).
Final Part Number
401100
-
(Options)
Configuration and Programming (required for order)
External Marking Technology (Check One)
Inkjet
Laser 8
For information about HID ActivID CMS , visit
www.hidgobal.com/crescendo and
www.actividentity.com.
2 Non-programmed cards require field programming
capability. Various solutions are available to securely
program credentials.
3 Any programming requiring custom keys or nonstandard memory locations.
4 The Manufacturing Legend is required on all cards.
5 External Card Marking is used to trace manufacturing
lots and provide readable serialization.
6 Contact Customer Service for custom artwork number,
lead-times, and cost.
7 Though most formats require two fields (site code and
card number), use this area for additional values if
required by the format.
8 Laser marking may extend lead times.
9 All Crescendo cards come with a blue magnetic stripe.
1
iCLASS Memory Size and Allocation (Check One, if applicable)
Not Applicable
32k Bits (4K Bytes) Application areas 16k/16+16k/1
Contactless Technology (Check One or more, if applicable)
iCLASS Programming
Configured, Non-Programmed 2
Programmed (Specify Programming)
MIFARE Classic or DESFire EV1 Programming
Programmed MIFARE (Specify HID Format, MIFARE only)
Non-Programmed 2
Custom Programmed, Specify Programming Information3
Prox Programming
Non-Programmed 2 125 kHz Prox.
Programmed 125 kHz Prox. (Specify Programming)
Programming Information
iCLASS
MIFARE Classic
125 kHz
Format (i.e. H10301)
Format (i.e. H10301)
Format (i.e. H10301)
Facility / Site Code
Facility / Site Code
Facility / Site Code
Additional Field Data7
Additional Field Data7
Additional Field Data7
Internal Card No. Start
External Card No.
External Start No.
Optional PIN:
Optional Elite Key:
Internal Card No. Start
None
Random
External Card No.
Matching
Non-Matching
(If not Matching)
External Start No.
Optional PIN:
Sequential: Start #
Random:
Length
ICE #
Internal Card No. Start
None
Random
Matching
Non-Matching
(If not Matching)
Sequential:
Random:
Optional Elite Key (SIO only): ICE #
External Card No.
None
Random
Matching
Non-Matching
(If not Matching)
External Start No.
Start #
Length
HID
Indala
Casi Compatible
DESFire EV1
Format (i.e. H10301)
Facility / Site Code
Additional Field Data7
Internal Card No. Start
External Card No.
External Start No.
Optional PIN:
Optional Elite Key (SIO only):
Page 8 of 39
None
Matching
(If not Matching)
Sequential:
Random:
ICE #
Random
Non-Matching
Start #
Length
© 2010 - 2013 HID Global Corporation. All rights reserved.
February 2013
Logical Access How to Order Guide – D00538, C.3
401150 - Crescendo Ordering Guide
Base Model :
401150 -- Crescendo C1150 – for Microsoft CryptoAPI and PKCS#11 using ActivIdentity ActivClient
Order minimum quantities of 25.
Contactless Technology (Check One). Call HID Customer Service if requiring other technologies.
0 – None - Contact only card (No physical access)
2 – 13.56 MHz iCLASS 32kb Only
4 – 13.56 MHz MIFARE 4KB Only
6 – 13.56 MHz DESFire EV1 8KB Only
A – Multi-Tech 13.56 MHz iCLASS 32 kb + 125 kHz Prox (HID, Indala, or Casi)
C – Multi-Tech 13.56 MHz MIFARE 4KB + 125 kHz Prox (HID, Indala, or Casi)
F – Multi-Tech 13.56 MHz iCLASS 32kb + MIFARE 4KB
G – Multi-Tech 13.56 MHz DESFire EV1 8KB + Prox - 125 kHz HID
H – Multi-Tech 13.56 MHz iCLASS 32kb + DESFire EV1 8KB
J – Multi-Tech 13.56 MHz iCLASS 32kb + DESFire EV1 8KB + 125 kHz HID
T – Multi-Tech 13.56 MHz iCLASS 32kb + MIFARE 4KB + 125 kHz HID
U – Multi-Tech 13.56 MHz MIFARE 4KB + DESFire EV1 8K
Option - Magnetic Stripe
M - Standard Three Track High Coercivity Magstripe (ISO 7811-6)
Option – Secure Identity Object Programming
H - Programmed with Security Identity Object (SIO): Dual Payload card
(Support SIO as well as Standard data format)
P - Programmed with Security Identity Object (SIO)
Option - Custom Artwork 6
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
From the above options, enter your final card options. Examples: 4011500 (for card without magnetic stripe
and no physical access technology) or 4011506M (for card with magnetic stripe and DESFire EV1 8KB).
Final Part Number
401150
-
(Options)
Configuration and Programming (required for order)
External Marking Technology (Check One)
Inkjet
Laser 8
For information about ActivIdentity ActivClient , visit
www.hidgobal.com/crescendo and www.actividentity.com.
Non-programmed cards require field programming
capability. Various solutions are available to securely
program credentials.
3 Any programming requiring custom keys or non-standard
memory locations.
4 The Manufacturing Legend is required on all cards.
5 External Card Marking is used to trace manufacturing lots
and provide readable serialization.
6 Contact Customer Service for custom artwork number, leadtimes, and cost.
7 Though most formats require two fields (site code and card
number), use this area for additional values if required by
the format.
8 Laser marking may extend lead times.
9 All Crescendo cards come with a blue magnetic stripe.
1
iCLASS Memory Size and Allocation (Check One, if applicable)
Not Applicable
32k Bits (4K Bytes) Application areas 16k/16+16k/1
Contactless Technology (Check One or more, if applicable)
iCLASS Programming
Configured, Non-Programmed 2
Programmed (Specify Programming)
MIFARE Classic or DESFire EV1 Programming
Programmed MIFARE (Specify HID Format, MIFARE only)
Non-Programmed 2
Custom Programmed, Specify Programming Information3
Prox Programming
Non-Programmed 2 125 kHz Prox
2
Programmed 125 kHz Prox. (Specify Programming)
Programming Information
iCLASS
MIFARE Classic
125 kHz
Format (i.e. H10301)
Format (i.e. H10301)
Format (i.e. H10301)
Facility / Site Code
Facility / Site Code
Facility / Site Code
Additional Field Data7
Additional Field Data7
Additional Field Data7
Internal Card No. Start
Internal Card No. Start
Internal Card No. Start
External Card No.
External Start No.
Optional PIN:
Optional Elite Key:
None
Random
External Card No.
Matching
Non-Matching
(If not Matching)
External Start No.
Optional PIN:
Sequential: Start #
Random:
Length
ICE #
None
Random
Matching
Non-Matching
(If not Matching)
Sequential:
Random:
Optional Elite Key (SIO only): ICE #
External Card No.
None
Random
Matching
Non-Matching
(If not Matching)
External Start No.
Start #
Length
HID
Indala
Casi Compatible
DESFire EV1
Format (i.e. H10301)
Facility / Site Code
Additional Field Data7
Internal Card No. Start
External Card No.
External Start No.
Optional PIN:
Optional Elite Key (SIO only):
February 2013
None
Matching
Random
Non-Matching
(If not Matching)
Sequential:
Random:
ICE #
Start #
Length
© 2010 - 2013 HID Global Corporation. All rights reserved.
Page 9 of 39
Logical Access How to Order Guide – D00538, C.3
400- Combo Contact and Contactless Ordering Guide
In most cases Crescendo credentials are the ideal combination of contact and contactless technologies. However, some legacy systems may require a specific contact chip. Consult
your account manager for current availability and contact chip codes.
0.033”
(.84 mm)
Contactless Technology (Check One) Call HID Customer Service for other technologies
0 – None - Contact only card (No physical access)
2 – 13.56 MHz iCLASS 32 kb Only
4 – 13.56 MHz MIFARE Classic 4KB Only
6 – 13.56 MHz DESFire EV1 8KB Only
A – Multi-tech 13.56 MHz iCLASS 32 KB and 125 kHz Prox (HID, Indala, or Casi)
C – Multi-tech 13.56 MHz MIFARE 4KB and 125 kHz Prox (HID, Indala, or Casi)
G – Multi-tech 13.56 MHz DESFire EV1 8KB and 125 kHz Prox (HID, Indala, or Casi)
F – Multi-tech 13.56 MHz iCLASS 32KB and MIFARE 4KB
H – Multi-tech 13.56 MHz iCLASS 32KB and DESFire EV1 8KB
J – Multi-tech 13.56 MHz iCLASS 32KB and DESFire EV1 8KB and 125 kHz Prox (HID, Indala, or Casi)
T – Multi-tech 13.56 MHz iCLASS 32KB and MIFARE 4KB and 125 kHz Prox (HID, Indala, or Casi)
U – Multi-Tech 13.56 MHz MIFARE 4KB + DESFire EV1 8K
3.370”
(85.7 mm)
2.125”
(54 mm)
Option - Magnetic Stripe
M - Standard Three Track High Coercivity Magstripe (ISO 7811-6)
Option – Secure Identity Object Programming
H – Programmed with Security Identity Object (SIO): Dual Payload card (Support SIO and Standard data format)
P – Programmed with Security Identity Object (SIO)
SHARED CARD EDGE
Contact Technology (Check One)
XXX – Replace with the three character contact chip code provided by your account manager.
Contact Chip Pre-Perso (Check One)
B -- Blank
S– Operating system instantiated
A– Applet loaded
Option - Custom Artwork 6
½ High Coercivity – ISO 7811-6 Compliant
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
OPTIONAL M AGNETIC STRIPE
THREE TRACK HIGH COERCIVITY
Enter your final card options from check boxes above. Examples: 400A and 400TM
Final Part Number
400
-
-
Configuration and Programming (required for order)
Manufacturing Le gend 4
Describes Ca rd Model
incl. Contactless Technology
External Marking Technology
Inkjet
X* XXXXX YYYYYYYY-YY
iCLASS XH
(Options)
External Ca rd Marking 5
Provides Human Readable
Association to Elect ronic Identities
Laser 8
iCLASS Memory Size and Allocation (Check One)
Not Applicable (Use this when choosing MIFARE options 4 and C above.)
16k Bits (2k Bytes) with 16 Application Areas
16k Bits (2k Bytes) with 2 Application Areas
32k Bits (4K Bytes) Application areas 16k/2+16k/1
32k Bits (4K Bytes) Application areas 16k/16+16k/1
Contactless Technology (Check One)
iCLASS
Not Applicable
Configured, Non-Programmed 2
MIFARE Classic
Not Applicable
Non-Programmed 2.
Programmed (Specify Programming)
Programmed MIFARE (Specify HID Format, MIFARE only)
Custom Programmed, Specify Programming Information 3
Programmed MIFARE (Specify HID Format, MIFARE only)
125 kHz Prox
Not Applicable
Initialized, Non-Programmed 2.
Programmed HID Prox
For information about MS CAPI and PKCS #11, visit www.hidgobal.com/crescendo.
cards require field programming capability. Various solutions are available
to securely program credentials.
3 Any programming requiring custom keys or non-standard memory locations.
4 The Manufacturing Legend is required on all cards.
5 External Card Marking is used to trace manufacturing lots and provide readable serialization.
6 Contact Customer Service for custom artwork number, lead-times, and cost.
7 Most formats require two fields (site code and card number); use this area for additional values if required.
8 Laser marking may extend lead times.
1
DESFire EV1 Classic
Not Applicable
Non-Programmed 2.
Custom Programmed, Specify Programming Information
2 Non-programmed
Programmed Indala/Casi Prox
Programmed Other Prox
Programming Information
iCLASS
MIFARE
Format (i.e. H10301)
125 kHz
Format (i.e. H10301)
Format (i.e. H10301)
Facility / Site Code
Facility / Site Code
Facility / Site Code
Additional Field Data7
Additional Field Data7
Additional Field Data7
Internal Card No. Start
External Card No.
External Start No.
Optional PIN:
Optional Elite Key:
Page 10 of 39
Internal Card No. Start
None
Matching
Random
External Card No.
Non-Matching
(If not Matching)
Sequential: Start #
Random:
Length
ICE #
External Start No.
Internal Card No. Start
None
Matching
Random
Non-Matching
(If not Matching)
Sequential:
Random:
External Card No.
None
Matching
External Start No.
Start #
Length
HID
Random
Non-Matching
(If not Matching)
Indala
Casi Compatible
Continued next page…
© 2010 - 2013 HID Global Corporation. All rights reserved.
February 2013
Logical Access How to Order Guide – D00538, C.3
DESFire EV1
Format (i.e. H10301)
Facility / Site Code
Additional Field Data7
Internal Card No. Start
External Card No.
External Start No.
Optional PIN:
Optional Elite Key (SIO only):
February 2013
None
Matching
(If not Matching)
Sequential:
Random:
ICE #
Random
Non-Matching
Start #
Length
© 2010 - 2013 HID Global Corporation. All rights reserved.
Page 11 of 39
Logical Access How to Order Guide – D00538, C.3
Dual Interface Cards
Those credentials are designed for combined physical and logical access control. The card is made of highly durable composite plastic and includes the contact as well as contactless
technologies necessary to support your existing physical access control systems. Include Magnetic stripe technology and personalize those cards with a photo ID, barcode or anticounterfeiting element. Ensure to check each option with the appropriate values to fulfill a completed order form.
405000 – pivCLASS Smart Card
Base Model :
405000 – pivCLASS Smart Card
Contactless Technology (Check One) Call HID Customer Service if requiring other technologies.
U – Standard ISO14443 Type A (contact and contactless)
V – Standard ISO14443 Type A + Prox 125 kHz
W – Standard ISO14443 Type A + iCLASS
Note: This card is not available with both iCLASS & Prox, either one of the two is possible.
Option - Magnetic Stripe
M – Standard Three Track High Coercivity Magstripe (ISO 7811-6)
Option – Secure Identity Object Programming (only for the card with iCLASS)
H – Programmed with Security Identity Object (SIO): Dual Payload Card
(Supports SIO as well as Standard data format)
Option - Custom Artwork 6
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
From the above options, enter your final card options. Examples: 405000.
Final Part Number
405000
-
(Options)
Configuration and Programming (required for order)
External Marking Technology (Check One)
Inkjet
Laser
iCLASS Memory Size and Allocation (Check One)
Not Applicable
32k Bits (4K Bytes) Application areas 16k/16+16k/1
Contactless Technology (Check One)
iCLASS
Not Applicable
Configured, Non-Programmed 2
Programmed (Specify Programming)
125 kHz Prox
Not Applicable
Initialized, Non-Programmed 2.
Programmed HID Prox
Programmed Indala/Casi Prox
Programmed Other Prox
iCLASS
125 kHz
Format (i.e. H10301)
Facility / Site Code
Format (i.e. H10301)
Facility / Site Code
Additional Field Data7
Additional Field Data7
Internal Card No. Start
External Card No.
External Start No.
Optional PIN:
Optional Elite Key:
None
Matching
Internal Card No. Start
Random
External Card No.
Non-Matching
(If not Matching)
Sequential: Start #
Random:
Length
ICE #
None
Matching
External Start No.
HID
Random
Non-Matching
(If not Matching)
Indala
Casi Compatible
For information about MS CAPI and PKCS #11, visit www.hidgobal.com/crescendo.
cards require field programming capability. Various solutions are available to securely program credentials.
3 Any programming requiring custom keys or non-standard memory locations.
4 The Manufacturing Legend is required on all cards.
5 External Card Marking is used to trace manufacturing lots and provide readable serialization.
6 Contact Customer Service for custom artwork number, lead-times, and cost.
7 Though most formats require two fields (site code and card number), use this area for additional values if required by the format.
8 Laser marking may extend lead times.
9 CUID marking corresponds to the card unique identifier matching the contact chip serial number. By default, the CUID is marked on the card.
1
2 Non-programmed
Page 12 of 39
© 2010 - 2013 HID Global Corporation. All rights reserved.
February 2013
Logical Access How to Order Guide – D00538, C.3
Embeddable Contactless Cards
1597 - Smart ISOProx® II Card Ordering Form
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
1597 Composite 40% Polyester / PVC *
Programming (Check One)
L - Programmed, Low Frequency (125 kHz). Specify Programming Information.
C - Programmed, Low Frequency (125 kHz) Casi-Rusco6. (Identified on Ink jet Markings)
Specify Programming Information.
N - Non-Programmed, Low Frequency (125 kHz). Programming Information Not Required.
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number1
Back Packaging (Check One)
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Reserved for
Contact Smart
Chip Module
(Front or Back
side)
G - Plain White PVC with Gloss Finish2
S - Standard Smart ISOProx II Artwork (shown)2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number1, 2
Front Packaging
Contact chip not included.
SHARED
CARD
EDGE
Card Numbering3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Engraved)4
C - Random Internal/Non-Matching Sequential External (Engraved)4
Back Packaging
Slot Punch5 (Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
For a list of embeddable modules, contact your Regional Sales Representative.
Option - Custom Artwork1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1397LGGMN
Final Part Number
1597
-
(Options #)
125 kHz Card Programming Information
Bit Numbers
. (example: 26 bit)
Facility Code
.
(Custom Formats) Site Code
. City Code
Internal Card No. Start
. Stop
.
External Card No. Start
. Stop
.
Special Instructions:
Format Number
. OEM Code
(example: H10301)
.
.
For Contact Smart Chip selection, contact your Regional Sales Representative. Standard configuration does not include a contact smart chip module.
1 For new artwork files, contact Customer Service for custom artwork number, lead-times and cost.
2 Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo
and reference number printed in the
lower left-hand corner and a slot punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
5 Cards are provided with an optional vertical slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. consult with the
printer manufacturer prior to ordering.
6 Programmed as a sequential 12 digit number.
* The composite construction is recommended for all cards that will have an over-laminate applied.
February 2013
© 2010 - 2013 HID Global Corporation. All rights reserved.
Page 13 of 39
Logical Access How to Order Guide – D00538, C.3
1598 - Smart DuoProx® II Card Ordering Form
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
1598 Composite 40% Polyester / PVC*
Base Model
Programming (Check One)
L - Programmed, Low Frequency (125 kHz). Specify Programming Information.
C - Programmed, Low Frequency (125 kHz) Casi-Rusco. (Identified on Ink jet Markings)
Specify Programming Information.
N - Non-Programmed, Low Frequency (125 kHz). Programming Information Not Required.
Optional
Contact Smart
Chip Module
(Front or Back
side)
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number1
Front Packaging
Contact chip not included.
Back Packaging (Check One)
SHARED
CARD
EDGE
G - Plain White PVC with Gloss Finish2
S - Standard Smart DuoProx II Artwork (shown)2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number1, 2
Card Numbering3 (Check One)
Back Packaging
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Engraved)4
C - Random Internal/Non-Matching Sequential External (Engraved)4
½ High Coercivity – ISO 7811-6 Compliant
For a list of embeddable modules, contact your Regional Sales Representative.
Slot Punch5 (Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Optional Custom Artwork1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1598LGGMN
Final Part Number
1598
125 kHz Card Programming Information
Bit Numbers
. (example: 26 bit)
Facility Code
.
(Custom Formats) Site Code
. City Code
Internal Card No. Start
. Stop
.
External Card No. Start
. Stop
.
Special Instructions:
Format Number
-
(Optional Artwork #)
(example: H10301)
. OEM Code
.
.
For Contact Smart Chip selection, contact your Regional Sales Representative. Standard configuration does not include a contact smart chip module.
1 For new artwork files, contact Customer Service for custom artwork number, lead-times and cost.
2 Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo
and reference number printed in the
lower left-hand corner and a slot punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
5 Cards are provided with an optional vertical slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. consult with the
printer manufacturer prior to ordering.
* The composite construction is recommended for all cards that will have an over-laminate applied.
Page 14 of 39
© 2010 - 2013 HID Global Corporation. All rights reserved.
February 2013
Logical Access How to Order Guide – D00538, C.3
211 - iCLASS Embeddable Card Ordering Guide
The iCLASS embeddable contactless smart card offers read/write capability. Personalize the card with a contact smart chip module, photo ID,
magnetic stripe, barcode, or anti-counterfeiting element.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
211 Composite 40% Polyester / PVC *
iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas
1 - 16k Bits (2k Bytes) with 2 Application Areas
2 - 16k Bits (2k Bytes) with 16 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Front Packaging
Programming (Check One)
C - Configured, Non-Programmed iCLASS. Programming Information Not Required.
P - Programmed iCLASS. Specify Programming Information.
Contact chip not included.
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork/Contact Module with Gloss Finish –
Specify Custom Artwork/Contact Module Number1
SHARED
CARD
EDGE
Back Packaging (Check One)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe Specify Custom Artwork Number1
Back Packaging
Card Numbering (Check One)
M - Sequential Matching Internal/External (Inkjetted)
O - Sequential External only (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)4
B - Sequential Internal/Sequential Non-Matching External
(Laser Engraved)4
C - Random Internal/Non-Matching Sequential External
(Laser Engraved)4
3
½ High Coercivity – ISO 7811-6 Compliant
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Slot Punch5 (Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
For a list of embeddable modules, contact your Regional Sales Representative.
Option - Custom Artwork1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 2111CGGNN
Final Part Number
211
-
(Options #)
iCLASS Card Programming Information
Bit Numbers
. (example: 26 bit)
Format Number
(example: H10301)
Facility Code
.
(Custom Formats) Site Code
. City Code
. OEM Code
.
Internal Card # Start
. Stop
. External Card # Start
. Stop
.
PIN (2-12 digits):
Sequential: Start #
Random: Length
.
Special Instructions:
.
For Contact Smart Chip selection, contact your Regional Sales Representative. Standard configuration does not include a contact smart chip module.
1
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
2
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a
slot punch target printed on the back of the card.
3
The external card number is placed in the bottom right-hand corner on the back of the card.
4
For Laser Engraved external numbers, consult factory for lead times and cost.
5
Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
* The composite construction is recommended for all cards with over-laminate applied. consult with the printer manufacturer prior to ordering.
February 2013
© 2010 - 2013 HID Global Corporation. All rights reserved.
Page 15 of 39
Logical Access How to Order Guide – D00538, C.3
213 - Combination (iCLASS + Prox) Embeddable Ordering Guide
The iCLASS Prox embeddable contactless smart card offers read/write and HID Prox capability in a single card. Personalize the card with a contact smart chip
module, photo ID, magnetic stripe, barcode, or anti-counterfeiting element.
Base Model
213 Composite 40% Polyester / PVC *
iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas
1 - 16k Bits (2k Bytes) with 2 Application Areas
2 - 16k Bits (2k Bytes) with 16 Application Areas
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Programming (Check One)
Optional
Contact Smart
Chip Module
(Front or Back
C - Configured, Non-Programmed iCLASS and 125 kHz Prox.
Programming Information Not Required.
A - Configured, Non-Programmed iCLASS, Programmed 125 kHz Prox.
Specify Programming Information.
P - Programmed iCLASS only. Specify Programming Information.
B - Programmed 125 kHz Prox and iCLASS.
Specify Programming Information.
Front Packaging (Check One)
Front Packaging
G - Plain White with Gloss Finish
C - Custom Artwork/Contact Module with Gloss Finish – Specify Custom Artwork/Contact Module Number1
Back Packaging (Check One)
Contact chip not included.
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1
SHARED
CARD
EDGE
iCLASS Card Numbering3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
O - Sequential External only (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)4
Back Packaging
Slot Punch5 (Check One)
½ High Coercivity – ISO 7811-6 Compliant
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
125 kHz Card Numbering3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
O - Sequential External only (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)4
12345 = Card ID Number
YYYYYYYY-YY = Sales Order No.
For a list of embeddable modules, contact your Regional Sales Representative.
Option - Custom Artwork1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 2133CGGMNM
Final Part Number
213
-
iCLASS Programming Information
Bit Numbers
Format Number
125 kHz Programming Information
. (example: 26 bit)
(Custom Formats) Site Code
.
. Stop
. Stop
(example: H10301)
.
. City Code
OEM Code
.
External Card No. Start
. (example: 26 bit)
Facility Code
. City Code
Internal Card No. Start
Sequential: Start #
Format Number
.
OEM Code
PIN:
Bit Numbers
(example: H10301)
Facility Code
(Custom Formats) Site Code
(Options #)
.
.
Random: Length
.
.
.
Internal Card No. Start
. Stop
External Card No. Start
. Stop
Special Instructions:
.
.
.
For Contact Smart Chip selection, contact your Regional Sales Representative. Standard configuration does not include a contact smart chip module.
1 For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and
reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card. 3 The external card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in bottom center
for 125 kHz Prox on the back of the card. 4 For Laser Engraved external numbers, consult factory for lead times and cost. 5 Cards are provided with an optional slot punch at no additional charge. Some video imaging printers
cannot accommodate pre-slot punched cards.
* The composite construction is recommended for all cards with over-laminate applied. consult with the printer manufacturer prior to ordering.
Page 16 of 39
© 2010 - 2013 HID Global Corporation. All rights reserved.
February 2013
Logical Access How to Order Guide – D00538, C.3
243 – Combination Dual HF (iCLASS / Other HF) Embeddable Ordering Guide
The iCLASS with MIFARE or DESFire embeddable smart card offers multiple High Frequency technologies to simplify card issuance for diverse systems or
migration projects. Add new applications while leveraging your investment in existing access control systems. Personalize the card with a photo ID, magnetic
stripe, barcode, or anti-counterfeiting element.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
243 Composite 40% Polyester / PVC *
iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE CLASSIC 1K)
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Card Programming (Check One)
B - Programmed iCLASS & 2nd Technology. Specify Programming Information –
P - Programmed iCLASS only not 2nd Technology. Specify Programming Information.
C - Configured, Non-Programmed iCLASS . Non-programmed 2nd Technology.
Programming Information Not Required.
A - Configured, Non-Programmed iCLASS, Programmed 2nd Technology.
Specify Programming Information.
2nd High Frequency Technology (Check One)
M – MIFARE Classic 1K Bytes (only available with iCLASS 2k bits)
N – MIFARE 4K Bytes
K – DESFire EV1 8K Bytes
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number1
Back Packaging (Check One)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1
iCLASS Card Numbering3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)4
Slot Punch
IMPORTANT: Dual High Frequency credentials do not allow a slot punch due to the antenna design.
HID recommends using a badge holder to attach this card to a lanyard or badge clip.
N - No Slot Punch
2nd High Frequency Technology Card Numbering3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)4
For a list of embeddable modules, contact your Regional Sales Representative.
Option - Custom Artwork1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 2434PNGGNNN
Final Part Number
243
iCLASS Programming Information
Bit Numbers
Format Number
Facility Code
iCLASS Elite ICE Number (if applicable)
(Custom Formats) Site Code
OEM Code
Internal Card No. Start
External Card No. Start
PIN:
Sequential: Start #
N
nd
2
. (example: 26 bit)
(example: H10301)
.
. City Code
. Stop
. Stop
Random: Length
.
.
.
.
.
-
(Options #)
13.56 MHz Programming Information
Bit Numbers
Format Number
Facility Code
(Custom Formats) Site Code
OEM Code
Internal Card No. Start
External Card No. Start
Special Instructions:
. (example: 26 bit)
(example: H10301)
.
. City Code
.
.
. Stop
.
. Stop
.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner and a
slot punch target printed on the back of the card.
3 The external card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and in the bottom center for 125 kHz Proximity on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
February 2013
© 2010 - 2013 HID Global Corporation. All rights reserved
Page 17 of 39
Logical Access How to Order Guide – D00538, C.3
263 – Multi Technology HF-HF (iCLASS / Other HF + Prox) Embeddable Ordering Guide
The iCLASS + Prox with MIFARE or DESFire embeddable smart card offers multiple High & Low Frequency technologies to simplify card issuance for diverse systems or migration
projects. Add new applications while leveraging your investment in existing access control systems. Personalize the card with a photo ID, magnetic stripe, barcode, or anticounterfeiting element.
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
263 Composite 40% Polyester / PVC *
iCLASS Memory Size and Allocation (Check One)
0 - 2k Bits (256 Bytes) with 2 Application Areas (only available with MIFARE CLASSIC 1K)
3 - 32k Bits (4K Bytes) Application areas 16k/2+16k/1
4 - 32k Bits (4K Bytes) Application areas 16k/16+16k/1
Card Programming (Check One)
T - iCLASS programmed, 2nd Technology programmed, 3rd Technology programmed.
Specify Programming Information
P - Programmed iCLASS and Prox not 2nd Technology. Specify Programming Information.
C - Configured, Non-Programmed iCLASS . Non-programmed 2nd Technology.
Prox programmed. Specify Programming Information.
A - Configured, Non-Programmed iCLASS, Programmed 2nd Technology and Prox.
Specify Programming Information.
N - Configured, Non-Programmed iCLASS, Non Programmed 2nd Technology and Prox.
2nd High Frequency Technology (Check One)
M – MIFARE Classic 1K Bytes (only available with iCLASS 2k bits)
N – MIFARE Classic 4K Bytes
K – DESFire EV1 8K Bytes
3rd Low Frequency Technology
P – HID Prox
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number1
Back Packaging (Check One)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1
iCLASS Card Numbering3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)4
Slot Punch
IMPORTANT: Those credentials do not allow a slot punch due to the antenna design. HID recommends using a badge holder to attach this card to a lanyard or badge clip.
N - No Slot Punch
2nd High Frequency Technology Card Numbering3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)4
3rd Low Frequency Technology Card Numbering3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)4
For a list of embeddable modules, contact your Regional Sales Representative.
Option - Custom Artwork1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 2634TNPGGSNNN
Final Part Number
Page 18 of 39
263
P
N
© 2010 - 2013 HID Global Corporation. All rights reserved.
-
(Options #)
Continued next page…
February 2013
Logical Access How to Order Guide – D00538, B.8
iCLASS 13.56 MHz Programming Information
Bit Numbers
Format Number
Facility Code
iCLASS Elite ICE Number (if applicable)
(Custom Formats) Site Code
OEM Code
Internal Card No. Start
External Card No. Start
PIN:
Sequential: Start #
2nd 13.56 MHz Programming Information
Bit Numbers
Format Number
Facility Code
(Custom Formats) Site Code
OEM Code
Internal Card No. Start
External Card No. Start
Special Instructions:
. (example: 26 bit)
(example: H10301)
.
. City Code
. Stop
. Stop
Random: Length
.
.
.
.
.
. (example: 26 bit)
(example: H10301)
.
. City Code
.
.
. Stop
.
. Stop
.
125 kHz Card Programming Information
Bit Numbers
. (example: 26 bit)
Format Number
(example: H10301)
Facility Code
.
(Custom Formats) Site Code
. City Code
Internal Card No. Start
. Stop
.
External Card No. Start
.Stop
.
Special Instructions:
. OEM Code
.
.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, or custom artwork, will still have a small HID logo
and reference number printed in the lower left-hand corner.
3 The external card number is placed in the bottom right-hand corner for iCLASS 13.56 MHz and MIFARE while it is in the bottom center for 125 kHz Proximity on the back of the card.
4 For Laser Engraved external numbers, consult factory for lead times and cost.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
2
February 2013
© 2010 - 2013 HID Global Corporation. All rights reserved
Page 19 of 39
Logical Access How to Order Guide – D00538, C.3
283 – Combination Dual HF (MIFARE Classic + MIFARE DESFire) Embeddable Ordering Guide
The MIFARE + DESFire embeddable smart card offers multiple High Frequency technologies to simplify card issuance for diverse systems or migration projects.
Add new applications while leveraging your investment in existing access control systems. Personalize the card with a photo ID, magnetic stripe, barcode, or
anti-counterfeiting element. This card is only made available with DESFire EV1 (not DESFire 0.6).
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
283 Composite 40% Polyester / PVC *
MIFARE High Frequency Technology
N – MIFARE 4K Bytes
Card Programming (Check One)
B - Programmed MIFARE and DESFire Technologies. Specify Programming Information
P - MIFARE Programmed only not DESFire Technology. Specify Programming Information
N - Non-Programmed MIFARE and DESFire
A - Non-Programmed MIFARE, Programmed DESFire Technology. Specify Programming Information.
DESFire High Frequency Technology
K – DESFire EV1 8K Bytes
Front Packaging (Check One)
G - Plain White with Gloss Finish
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number1
Back Packaging (Check One)
G - Plain White with Gloss Finish2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number1
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1
MIFARE High Frequency Card Numbering3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)4
Slot Punch
IMPORTANT: Dual High Frequency credentials do not allow a slot punch due to the antenna design.
HID recommends using a badge holder to attach this card to a lanyard or badge clip.
N - No Slot Punch
DESFire High Frequency Technology Card Numbering3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)4
For a list of embeddable modules, contact your Regional Sales Representative.
Option - Custom Artwork1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new artwork)
Enter your final card options from the above selections. Example: 2434PNGGNNN
Final Part Number
273
N
K
MIFARE 13.56 MHz Programming Information
Bit Numbers
Format Number
Facility Code
(Custom Formats) Site Code
OEM Code
Internal Card No. Start
External Card No. Start
Special Instructions:
(example: 26 bit)
(example: H10301)
.
. City Code
.
.
. Stop
.
. Stop
.
N
-
(Options #)
DESFire 13.56 MHz Programming Information
Bit Numbers
Format Number
Facility Code
(Custom Formats) Site Code
OEM Code
Internal Card No. Start
External Card No. Start
Special Instructions:
(example: 26 bit)
(example: H10301)
.
. City Code
.
.
. Stop
.
. Stop
.
.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost. 2 Cards ordered with plain white front and back packaging, or custom artwork, will
have a small HID logo
, reference number (lower left corner) and a slot punch target printed on the back of the card. 3 The external card number on the card back is placed in the
bottom right corner for MIFARE 13.56 MHz and in the bottom center for DESFire. 4 For Laser Engraved external numbers, consult factory for lead times and cost. 5 Cards are provided
with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards.
* The composite construction is recommended for all cards with over-laminate applied. Consult with the printer manufacturer prior to ordering.
1
Page 20 of 39
© 2010 - 2013 HID Global Corporation. All rights reserved.
February 2013
Logical Access How to Order Guide – D00538, C.3
®
1436/1446 – MIFARE Embeddable Card Ordering Guide
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
1436 (1K) Composite 40% Polyester / PVC *
1446 (4K) Composite Polyester 40% / PVC *
Programming (Check One)
M - Programmed, (13.56 MHz with HID Format)6. Specify Programming Information.
N - Non-Programmed (13.56 MHz )6. Programming Information Not Required.
Optional
S - Custom Programmed, Specify Programming Information.
Front Packaging (Check One)
Contact Smart
Chip Module
(Front or Back side)
Number below.1
If Custom Artwork is desired, specify Custom Artwork
 E - Contact Module Embeddable Plain Gloss White Finish
Front Packaging
Contact chip not included.
Back Packaging (Check One)
G - Plain White with Gloss Finish2
S - Standard MIFARE Artwork2
1 - Plain White with Gloss Finish with Magnetic Stripe2
2 - Standard MIFARE Artwork with Magnetic Stripe
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number1, 2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe
Specify Custom Artwork Number1, 2
SHARED
CARD
EDGE
Back
Packaging
Card Numbering3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
O - Sequential External only (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)4
½ High Coercivity – ISO 7811-6 Compliant
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Slot Punch5 (Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
For a list of embeddable modules, contact your Regional Sales Representative.
Option - Custom Artwork1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1430NGGNN
Final Part Number
E
-
(Options #)
13.56 MHz Card Programming Information
Bit Numbers
. (example: 26 bit)
Facility Code
.
(Custom Formats) Site Code
Internal Card No. Start
External Card No. Start
Special Instructions:
Format Number
. City Code
. Stop
. Stop
. OEM Code
(example: H10301)
.
.
.
.
For Contact Smart Chip selection, contact your Regional Sales Representative. Standard configuration does not include a contact smart chip module.
1
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
2
Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo
and reference number printed in the
lower left-hand corner and a slot punch target printed on the back of the card.
3
The external card number is placed in the bottom right-hand corner on the back of the card on Prox Format Programming only. Permanent Unique MIFARE 32 Bit serial # cannot be
printed on cards.
4
For Laser Engraved external numbers, consult factory for lead times and cost.
5
Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer
manufacturer prior to ordering.
6
Includes a permanent Unique MIFARE 32 Bit Serial number.
* The composite construction is recommended for all cards with over-laminate applied.
February 2013
© 2010 - 2013 HID Global Corporation. All rights reserved
Page 21 of 39
Logical Access How to Order Guide – D00538, C.3
1437/1447–Combination (MIFARE + Prox) Embeddable Card Ordering Guide
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Base Model
1437 (1K) Composite 40% Polyester / PVC *
1447 (4K) Composite 40% Polyester / PVC *
MIFARE Programming (Check One)
L - Programmed, (125 kHz only with HID Format)6. Specify Programming Information.
M - Programmed, (13.56 MHz only with HID Format)6. Specify Programming Information.
B - Programmed, (125kHz and 13.56 MHz with HID Format)6. Specify Programming Information.
N - Non-Programmed (125 kHz and 13.56 MHz without HID Format)6. Programming Information Not Required.
S - Custom Programmed , (13.56 MHz only)6, Prox configured Specify Programming Information.
R - Custom Programmed , (125kHz and Custom 13.56 MHz with HID Format)6, Specify Programming Information.
Front Packaging (Check One)
Front Packaging
Contact chip not included.
below.1
If desiring Custom Printing, specify Custom Artwork Number
E - Contact Module Embeddable Plain Gloss White Finish
SHARED
CARD
EDGE
Back Packaging (Check One)
12345 = Card ID Number
G - Plain White with Gloss Finish2
YYYYYYYY-YY = Sales Order Number
S - Standard HID Prox and MIFARE Artwork2
1 - Plain White with Gloss Finish with Magnetic Stripe2
2 - Standard MIFARE Artwork with Magnetic Stripe
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1, 2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1, 2
Back Packaging
13.56 MIFARE Card Numbering3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
O - Sequential External only (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Engraved)4
C - Random Internal/Non-Matching Sequential External (Engraved)4
½ High Coercivity – ISO 7811-6 Compliant
Slot Punch5 (Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
125 kHz Prox Card Numbering3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
O - Sequential External only (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Engraved)4
C - Random Internal/Non-Matching Sequential External (Engraved)4
For a list of embeddable modules, contact your Regional Sales Representative.
Option - Custom Artwork1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1441NGGNNN
Final Part
Number
E
-
(Options #)
13.56 MHz Programming Information
125 kHz Programming Information
Bit Numbers
Bit Numbers
Format Number
. (example: 26 bit)
(example: H10301)
Facility Code
(Custom Formats) Site Code
.
. Stop
External Card No. Start
. Stop
Sequential: Start #
.
(Custom Formats) Site Code
.
Internal Card No. Start
. (example: 26 bit)
(example: H10301)
Facility Code
. City Code
OEM Code
PIN:
Format Number
.
. City Code
OEM Code
.
.
Random: Length
.
Internal Card No. Start
. Stop
External Card No. Start
. Stop
Special Instructions:
.
.
.
.
.
For Contact Smart Chip selection, contact your Regional Sales Representative. Standard configuration does not include a contact smart chip module.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo
and reference number printed in the
lower left-hand corner and a slot punch target printed on the back of the card.
3
The external card number is placed in the bottom left-hand corner (125kHz) and in the bottom right-hand corner (13.56 MHz) on the back of the card on Prox Programming only.
Permanent unique MIFARE 32 Bit serial # cannot be printed on cards.
4
For Laser Engraved external numbers, consult factory for lead times and cost.
5
Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer
manufacturer prior to ordering.
6
Includes a permanent Unique MIFARE 32 Bit Serial number.
* The composite construction is recommended for all cards with over-laminate applied.
1
2
Page 22 of 39
© 2010 - 2013 HID Global Corporation. All rights reserved.
February 2013
Logical Access How to Order Guide – D00538, C.3
1456 – DESFire® Embeddable Card Ordering Form Guide
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Note: Those EV1 cards can operate in a backward compatible mode and work with existing DESFire systems supporting DESFire 0.6
Base Model
1456 Composite 40% Polyester / PVC *
MIFARE DESFire EV1 Memory Size
C - 8K Bytes MIFARE DESFire EV1
Programming (Check One)
N - Non-Programmed (13.56 MHz)6. Programming Information Not Required.
S - Custom Programmed , (13.56 MHz only)6, Specify Programming Information.
Front Packaging (Check One)
Front Packaging
Back Packaging (Check One)
Contact chip not included.
If desiring Custom Printing, specify Custom Artwork Number below.1
E - Contact Module Embeddable Plain Gloss White Finish
G - Plain White with Gloss Finish2
1 - Plain White with Gloss Finish with Magnetic Stripe2
C - Custom Artwork with Gloss Finish – Specify Custom Artwork Number1, 2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1, 2
SHARED
CARD
EDGE
Card Numbering3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
O - Sequential External only (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Laser Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Laser Engraved)4
C - Random Internal/Non-Matching Sequential External (Laser Engraved)4
Back
Packaging
½ High Coercivity – ISO 7811-6 Compliant
Slot Punch5 (Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
For a list of embeddable modules, contact your Regional Sales Representative.
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number
Option - Custom Artwork1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1456CNEGNN
Final Part Number
1456
C
E
-
(Options #)
13.56 MHz Card Programming Information
Bit Numbers
. (example: 26 bit)
Facility Code
.
(Custom Formats) Site Code
. City Code
Internal Card No. Start
. Stop
.
External Card No. Start
. Stop
.
Special Instructions:
Format Number
. OEM Code
(example: H10301)
.
.
For Contact Smart Chip selection, contact your Regional Sales Representative. Standard configuration does not include a contact smart chip module.
1
2
3
4
5
6
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo
and reference number printed in the
lower left-hand corner and a slot punch target printed on the back of the card.
The external card number is placed in the bottom right corner on the back of the card on Prox Format Programming only. Permanent Unique MIFARE 56 Bit serial # cannot be
printed on cards.
For Laser Engraved external numbers, consult factory for lead times and cost.
Cards are provided with optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult the printer manufacturer
prior to ordering.
Includes a permanent Unique MIFARE 56 Bit Serial number.
February 2013
© 2010 - 2013 HID Global Corporation. All rights reserved
Page 23 of 39
Logical Access How to Order Guide – D00538, C.3
1457 – Combination (DESFire® + PROX) Embeddable Card Ordering Guide
Ensure each required option has been checked with the appropriate choice to fulfill a completed order form.
Note: Those EV1 cards can operate in a backward compatible mode and work with existing DESFire systems supporting DESFire 0.6
Base Model
1457 Composite 40% Polyester / PVC *
MIFARE DESFire EV1 Memory Size
C - 8K Bytes MIFARE DESFire EV1
DESFire Programming (Check One)
L - Programmed, (125 kHz only)6. Specify Programming Information.
N - Non-Programmed (125 kHz and 13.56 MHz)6. Programming Information Not Required.
S - Custom Programmed , (13.56 MHz only)6, Prox Configured Specify Programming Information.
R - Custom Programmed , (125kHz and Custom 13.56 MHz)4, 6, Specify Programming Information.
Front Packaging (Check One)
If desiring Custom Printing, specify Custom Artwork Number below.1
E - Contact Module Embeddable Plain Gloss White Finish
SHARED
CARD
EDGE
Back Packaging (Check One)
G - Plain White with Gloss Finish2
1 - Plain White with Gloss Finish with Magnetic Stripe2
3 - Custom Artwork with Gloss Finish with Magnetic Stripe - Specify Custom Artwork Number1, 2
C - Custom Artwork with Gloss Finish - Specify Custom Artwork Number1, 2
13.56 DESFire Card Numbering3 (Check One)
12345 = Card ID Number
M - Sequential Matching Internal/External (Inkjetted)
YYYYYYYY-YY = Sales Order Number
O - Sequential External only (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Engraved)4
C - Random Internal/Non-Matching Sequential External (Engraved)4
Back Packaging
½ High Coercivity – ISO 7811-6 Compliant
Slot Punch5 (Check One)
N - No Slot Punch (Printed location of vertical slot punch will remain)
V - Vertical Slot Punch
125 kHz Prox Card Numbering3 (Check One)
M - Sequential Matching Internal/External (Inkjetted)
O - Sequential External only (Inkjetted)
N - No External Card Numbering
S - Sequential Internal/Sequential Non-Matching External (Inkjetted)
R - Random Internal/Non-Matching Sequential External (Inkjetted)
A - Sequential Matching Internal/External (Engraved)4
B - Sequential Internal/Sequential Non-Matching External (Engraved)4
C - Random Internal/Non-Matching Sequential External (Engraved)4
For a list of embeddable modules, contact your Regional Sales Representative.
Option - Custom Artwork1
(Specify Artwork Number – Refer to the Custom Artwork Forms for new Artwork)
Enter your final card options from check boxes above. Example: 1457CNEGNNN
Final Part Number
1457
C
E
-
(Options #)
13.56 MHz Programming Information
125 kHz Programming Information
Bit Numbers
Bit Numbers
Format Number
. (example: 26 bit)
(example: H10301)
Facility Code
(Custom Formats) Site Code
. City Code
. Stop
External Card No. Start
. Stop
Sequential: Start #
(Custom Formats) Site Code
.
(example: H10301)
.
. City Code
OEM Code
.
Internal Card No. Start
. (example: 26 bit)
Facility Code
.
OEM Code
PIN:
Format Number
.
.
Random: Length
.
Internal Card No. Start
. Stop
External Card No. Start
. Stop
Special Instructions:
.
.
.
.
.
For Contact Smart Chip selection, contact your Regional Sales Representative. Standard configuration does not include a contact smart chip module.
For new artwork files, contact Customer Service for custom artwork number, lead-times, and cost.
Cards ordered with plain white front and back packaging, with no HID artwork or with custom artwork, will still have a small HID logo
and reference number printed in the
lower left-hand corner and a slot punch target printed on the back of the card.
3
The external card number is placed in the bottom left-hand corner (125kHz) and in the bottom right-hand corner (13.56 MHz) on the back of the card on Prox Programming only.
Permanent unique MIFARE 56 Bit serial # cannot be printed on cards.
4
For Laser Engraved external numbers, consult factory for lead times and cost..
5
Cards are provided with an optional slot punch at no additional charge. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer
manufacturer prior to ordering.
6
Includes a permanent Unique MIFARE 56 Bit Serial number.
* The composite construction is recommended for all cards with over-laminate applied.
1
2
Page 24 of 39
© 2010 - 2013 HID Global Corporation. All rights reserved.
February 2013
Logical Access How to Order Guide – D00538, C.3
Card Packages
iCLASS / Prox Combo Cards (for iCLASS or Prox on the Desktop)
2124BG3MNN-10PAK
iCLASS 32K (16K/16 + 16K/1) and HID Prox
Front
Use iCLASS / Prox / mag combination cards to test both Prox on the Desktop and iCLASS on the
Desktop solutions. These cards are pre-programmed with an HID 26 bit format and printed on oneside. The front side is left blank and suitable for dye sublimation imaging, if desired.
Crescendo (for Crescendo on the Desktop)
402AM-10PAK
407AM-10PAK
402CM-10PAK
407CM-10PAK
Crescendo C200
Crescendo C700
Crescendo C200
Crescendo C700
iCLASS/HID Prox
iCLASS/HID Prox
MIFARE/HID Prox
MIFARE/HID Prox
Back
Front
Use Contact Chip / Prox / (iCLASS or MIFARE) / mag combination cards to test all HID on the
Desktop solutions. While they are primarily offered to test Crescendo on the Desktop, you can use
these cards to test Prox on the Desktop and iCLASS on the Desktop. These cards are preprogrammed with an HID 26 bit format and printed on one-side. The front side is left blank and
suitable for dye sublimation imaging, if desired.
Note: To test iCLASS on the Desktop with a Crescendo card, you must order one of the two models
that contain the iCLASS technology.
February 2013
© 2010 - 2013 HID Global Corporation. All rights reserved.
Back
Page 25 of 39
Logical Access How to Order Guide – D00538, C.3
Crescendo Evaluation Kit
A Crescendo Evaluation Kit contains a:
• Crescendo smart card stored in the Crescendo Pocket Guide.
Choose from four different card types.
HID Part Number
1405080111
1405080112
•
•
Crescendo Evaluation kit C700 iCLASS, Prox, Magstripe
Crescendo Evaluation kit C200 iCLASS, Prox, Magstripe
Crescendo Smart Card Reader
This is a USB desktop reader optimized for use
with the Crescendo smart card. If you have a
contact smart card reader currently connected to
your PC, you may choose to use that reader.
Quick Start Guide
The Crescendo card within an Evaluation kit is a working,
printed Crescendo card that contains an evaluation
certificate issued by HID. The card is encoded with HID
standard values in the contactless part for physical access.
Evaluate your Crescendo smart card in three ways.
• Using HID’s remote desktop server
• Using your own corporate network with Windows®
server
• Together with Microsoft® Identity Lifecycle
Manager 2007
To learn more, visit our evaluation site at
www.hidcrescendo.com.
Page 26 of 39
© 2010 - 2013 HID Global Corporation. All rights reserved.
February 2013
Logical Access How to Order Guide – D00538, C.3
Desktop Smartcard Readers
Reader Ordering Guide
Each OMNIKEY Smart Card reader has a unique part number. These numbers as listed below and always represent
the standard product. Customized products will receive an individual part number upon confirmation of the order. All
part numbers must be complete for acceptance by HID Global’s order entry system.
Due to organizational changes, product improvements, and firmware changes, part numbers of OMNIKEY Smart
Card Readers can be subject to change.
The following ordering is available for OMNIKEY readers.
* TAA - TAA stands for Trade Agreements Act of 1979. The TAA is an Act of Congress that governs trade
agreements negotiated between the United States and other countries. Provided is a list of countries in which United
States institutions may purchase devices.
Table 1 - OMNIKEY Smartcard Readers
OMNIKEY Model
PC Interface
Customization
Options
3111 Serial
(Serial RS232
Interface)




Description
Part Number
TAA* Part
Number
Logo
Housing Color
Cable
Landing
Contacts




Contact Reader
EMV
Standard (light) standing base
TAA compliant
N/A
R31110015-1
 Logo
 Housing Color
 Cable




Contact Reader
EMV, CCID
Transparent housing
TAA compliant
R30210015-1
R30210009-1




Logo
Housing Color
Cable
Landing
Contacts




Contact Reader
EMV, CCID
Standard (light) standing base
TAA compliant
R31210020-01
R31210049-1
3121 USB
(Heavy standing
base)




Logo
Housing Color
Cable
Landing
Contacts
 Contact Reader
 EMV, CCID
 Heavy standing base (100 gram)
and middle piece
 TAA compliant
N/A
R31210095-1
3121 USB
(Jumbo standing
base)




Logo
Housing Color
Cable
Landing
Contacts
 Contact Reader
 EMV, CCID
 Jumbo standing base (431 gram)
and middle piece
 TAA compliant
R31210125
R31210103
 Housing Color
 Cable
 Contact Reader CCID compliant
 Fits into 3.5’’ Floppy Bay
 Available with internal or external
USB cable
Retail Version includes:
 Driver CD
 internal & external USB cable
3021 USB
3121 USB
3921 USB
2061 Bluetooth
February 2013
 Bluetooth connected contact
 Bluetooth
smartcard reader
 USB 2.0
 Lanyard attachable
(for configuration
 Two belt-clips
and charging)
 Charging cable
Solution
Compatibility
Crescendo
Crescendo on
the Desktop
Crescendo
Crescendo on
the Desktop
Crescendo
Crescendo on
the Desktop
Crescendo
Crescendo on
the Desktop
Crescendo
R39210001-1
(int. USB)
R39210009-1
(ext. USB)
Crescendo on
the Desktop
Crescendo
N/A
R39210003-1
(Retail)
Crescendo on
the Desktop
Crescendo
R20610000-1
© 2010 - 2013 HID Global Corporation. All rights reserved.
N/A
Crescendo on
the Desktop
Page 27 of 39
Logical Access How to Order Guide – D00538, C.3
OMNIKEY Model
PC Interface
Customization
Options
Description
 Label (top)
 Contact Reader
 EMV
 TAA compliant
 Label (top)




4121
ExpressCard™
 Logo
 Label (top)
 Full-featured Contactless
(13.56 MHz) Desktop Reader
 Transparent card retainer
 Fits into ExpressCard™ 34mm
and 54mm slots
 Optional mechanical 54mm
adapter for better stability
6121 USB Dongle
 Logo
 Housing Color




6221 MicroSD
USB 2.0 interface
 Logo
 Housing Color
 Contact SIM sized card reader
with Micro SD Memory support
 ISO 7816 SIM-Size (ID-000)
contact slot
 Micro SDHC memory card slot
supporting up to 32GB
 USB 2.0
3621 USB PINPAD
 Logo
 Housing Color




3821 USB PINPAD
 Logo
 Housing Color





 Logo
 Housing Color
 Cable
 Contactless (13.56 MHz) and
Contact Reader
 Transparent bracket
 EMV, CCID
 Optionally TAA compliant
R53210037-2
 Logo
 Housing Color
 Cable
 Contactless (13.56 MHz) and SIMsized Contact Reader
 Supporting SIM sized cards
 Transparent bracket
 Optionally TAA compliant
R53210038-2
4040 PCMCIA
4321
ExpressCard™ 54
5321 USB (V2)
5321 CL SAM
(USB Interface)
Page 28 of 39
Contact Reader
EMV, CCID
Optional with or without insertion lip
TAA compliant
Part Number
TAA* Part
Number
Solution
Compatibility
Crescendo
N/A
N/A
R40400012
R43210001-2
(No Lip)
R43210002-1
(with Lip)
Crescendo on
the Desktop
Crescendo
Crescendo on
the Desktop
R41210001-1
(for optional 54mm
adaptor see below)
N/A
R61210020-2
R61210020TAA
R62210000
N/A
Contact Reader
Secure Pin Entry (class 2)
EMV, CCID
TAA compliant
N/A
R36210010-1
Crescendo
Contact Reader
Secure Pin Entry (class 2/3)
With display
EMV, CCID
TAA compliant
N/A
R38210012-1
Crescendo
USB 2.0 Dongle (SIM-sized card)
EMV, CCID
Key ring attachable
Optionally TAA compliant
iCLASS on the
Desktop
Crescendo
R53210037-3
iCLASS on the
Desktop
Crescendo on
the Desktop
© 2010 - 2013 HID Global Corporation. All rights reserved.
R53210038-3
iCLASS on the
Desktop
February 2013
Logical Access How to Order Guide – D00538, C.3
OMNIKEY Model
PC Interface
Customization
Options
Description
Part Number
TAA* Part
Number
Solution
Compatibility
5321 CR (V2)
(USB Interface)
 Cable
 Contactless (13.56MHz) Reader
closed housing
 No edges and grooves for easy
cleaning
 Waterproof casing IP67
 TAA compliant
N/A
R53210029-1
iCLASS on the
Desktop
6321 USB
 Logo
 Housing Color
 Contactless (13.56 MHz) and
SIM-sized contact reader
 Special card holder
 CCID
 Optionally TAA compliant
R63210004-1
R63210001-1
iCLASS on the
Desktop
6321 CLi USB
 Logo
 Housing Color
 Contactless Dongle Reader
 iCLASS only
 Special card holder
R63210003-1
N/A
iCLASS on the
Desktop
5321 CLi USB
 Logo
 Housing Color
 Cable




R53210039-1
N/A
iCLASS on the
Desktop
5321 PAY
(USB Interface)
 Logo
 Housing Color
 Payment EMVCo 2.0 CL certified
 Transaction status LEDs
 Contactless (13.56 MHz) and
SIM-sized Smart Card Reader
 Transparent card retainer
R53210021
N/A
iCLASS on the
Desktop
 Logo
 Housing Color
 Cable
 Contactless (13.56 MHz &
125 kHz HID Prox) Smart Card
Reader
 CCID or Keyboard Wedge
Operation Mode
 Closed Housing
 Web-based configuration interface
 Transparent card retainer
 Logo
 Housing Color
 Cable
 Contactless (13.56 MHz &
125 kHz HID Prox) Smart Card
Reader
 CCID support
 Closed Housing
 HID Prox, iCLASS & iCLASS SE
support
 Logo
 Housing Color
 Cable
 Contactless (125 kHz HID Prox)
and Contact Reader
 Transparent card retainer
 EMV, CCID
R53250009-1
 Contactless (13.56 MHz) Desktop
Reader
 Available in various color options
 Optional Card Retainer &
Mounting Accessories
R50210018-DB
(Dark Blue)
R50210018-BL
(Baby Blue)
R50210018-GR (Grey)
R50210018-GN (Green)
R50210018-OR (Orange)
R50210018-RD (Red)
(See Mounting Accessory
Pack and Card Retainer)
5427 CK
(USB Interface)
5326 DFR
(USB Interface)
Contactless Desktop Reader
iCLASS only
Closed housing
Transparent card retainer
R54270001
(See Vertical Standing
Base and Mounting
Accessory Pack.)
N/A
R53260001-1
N/A
Crescendo
5325 USB PROX
5021 CL USB
February 2013
 Logo
 Housing Color
 Cable
N/A
Prox on the
Desktop
Crescendo on
the Desktop
© 2010 - 2013 HID Global Corporation. All rights reserved.
N/A
iCLASS on the
Desktop
Page 29 of 39
Logical Access How to Order Guide – D00538, C.3
OMNIKEY Model
PC Interface
Customization
Options
Description
Part Number
TAA* Part
Number
Solution
Compatibility
5321 CL USB
 Logo
 Housing Color
 Cable
 Contactless (13.56 MHz) Desktop
Reader
 Closed housing
 Transparent card retainer
R53210038-1
N/A
iCLASS on the
Desktop
 Logo
5325 CL USB PROX  Housing Color
 Cable
 Contactless Only Reader
(125 kHz HID® Prox)
 Closed Housing
 Transparent card retainer
R53250008-1
N/A
Prox on the
Desktop
Heavy standing
base 31xx
 Heavy standing base
 Middle piece
 Weight includes middle piece
100 gram
A00000002
OMNIKEY 3121
OMNIKEY 3111
Jumbo standing
base 31xx
 Jumbo standing base
 Middle piece
 Weight includes middle piece
431 gram
A00000003
OMNIKEY 3121
OMNIKEY 3111
Mounting Accessory
Pack
 Packaging size 10 pcs.
 Mounting Jacket for Screw-on
mount
 Mounting Jacket Camera
mounting screw use (hex nut)
 Adhesive Strip for mounting jacket
A50210001
OMNIKEY 5427
OMNIKEY 5021
Card Retainer
 Packaging size 10 pcs.
 Card Retainer for card-present
operation
A50210001
OMNIKEY 5021
Vertical Standing
Base




Standing base for vertical reader
Supports card-present operation
Weight approx. 90 gram
Packaging size 1 pcs.
A54270001
OMNIKEY 5427
Clip-on Adaptor
54mm
 Packaging size 10 pcs.
 Optional mechanical clip-on
adaptor to add stability in 54mm
 Reader not included
A41210001
OMNIKEY 4121
OMNIKEY Customization Program
HID offers a number of standard customizations for its OMNIKEY Smartcard Readers. The following standard
customization options exist.
Standard Customization Options
•
Landing Contacts – Replace the sliding contacts unit (default) with landing contacts
•
No Logo – no HID Logo on reader
•
Logo - Alternative Logo on the reader
Page 30 of 39
© 2010 - 2013 HID Global Corporation. All rights reserved.
February 2013
Logical Access How to Order Guide – D00538, C.3
•
Housing - Alternative housing color
•
Label – Alternative product label
•
Cable - Alternative Length
The following rules apply to all standard customizations.
•
Minimum order quantities (MOQ) may apply (depending on the requested customization)
•
Addition costs for setup (NRE) and per unit may apply
•
Additional Sign-off processes may be required (for example, special artwork and samples)
•
Lead-time increases (due to additional approval and production procedures)
February 2013
© 2010 - 2013 HID Global Corporation. All rights reserved.
Page 31 of 39
Logical Access How to Order Guide – D00538, C.3
OMNIKEY Order Form for Standard Customization Requests
This form, accompanied with the Custom Artwork files, MUST be filled out,
SIGNED and returned to HID so that your order can be processed.
Full HID Part Number to be customized:
Base Product Name:
Quantity:
Desired Delivery Date:
HID Sales Manager:
Customer Contact Information (for Customization Approval & Artwork Sign Off)
HID Customer Number:
Company:
Contact Name:
Contact Email:
Contact Phone:
Contact Shipping Address (for Samples):
Customization Options:
For a full list including non-standard customization options available for the HID OMNIKEY Smart Card readers, contact your Sales Manager.
See the availability of customizations per OMNIKEY reader in Table 1 - OMNIKEY Smartcard Readers (column Customization Options).
Landing Contact Unit. No additional information required.
Customization option available for 3121 / 3111 reader family.
MOQ is 500 pcs.
Neutral – No HID Logo. No additional information required.
Customization option is available for all readers except: 4040, 4121, 4321, 2061 and 3921 reader families.
MOQ is 500 pcs.
Logo Printing – Alternative Reader Logo. Complete all fields.
Housing part to customize (e.g. cap, main body):
Color Codes in Pantone for all colors used in logo:
For all text elements- font style, size, position & color:
Attached custom artwork file name & format (e.g. PDF, AI, JPG):
Resolution must be at least 600dpi.
Logo positioning (description / attached drawings file):
Customization option is available for all readers except 4040, 4121, 4321,5321 CR, 2061 and 3921 reader families.
MOQ is 500 pcs.
Housing – Alternative Housing Color. Complete all fields.
Housing part to customize (e.g. cap, main body):
Color Code(s) in Pantone Plastic:
Customization option is available for all readers except 4040, 4121, 4321, 2061 and 5321 CR readers.
MOQ is 5.000 pcs.
Labeling – Alternative Product Label. Complete all fields.
Attached custom artwork file name & format (e.g. PDF, AI, JPG):
Resolution must be at least 600dpi.
Color Codes & coding system for all colors in label:
Customization option available for the top label of 4040,4121 & 4321 reader families.
MOQ is 500 pcs.
Cable - Alternative Cable Length. Complete all fields.
Desired cable length in centimeters (cm):
Customization option available for all readers except 2061,4040, 4121, 4321, 3621, 3821 and 6x21 reader families.
MOQ is 5.000 pcs.
Additional Comments (optional)
Add further comments for your customization request as necessary.
Name:
Signature:
Date:
Send this form to your sales or customer service representative for further processing.
Page 32 of 39
© 2010 - 2013 HID Global Corporation. All rights reserved.
February 2013
Logical Access How to Order Guide – D00538, C.3
Appendix
Custom Cards
Artwork Checklist
Company Name:
Quantity:
PO No.
Card Artwork File No.
Date
Minimum order quantity for Custom Artwork is 500 cards per order. Some Custom Artworks may be higher.
This form, accompanied with the Custom Artwork placement and Inkjet Location Form
MUST be filled out, SIGNED and returned to HID so that your order can be processed.
Credential Type: Composite PVC/Polyester1 Cards (Additional fee and longer lead-time)
402/407 Crescendo Card
400 Combo Contact/Contactless Card
1597 Smart ISOProx II Card
1598 Smart DuoProx II Card
211 - iCLASS Embeddable Card
213 - iCLASS Prox embeddable Card
1436/1446 - MIFARE
1437/1447 - HID Prox and MIFARE
®
1456 - DESFire®
1457 - DESFire® and Prox
Artwork Placement, Font styles and Colors:
Artwork Placement on Front Side of card
Artwork Placement on Back Side of card.
Font Style(s):
Front Side Colors:
Back Side Colors
Do you plan to print over or around the custom artwork with a dye sublimation printer?
Surface
or Laminated
Yes
No
Lithographic Printing (Refer to the Anti-Counterfeiting Descriptions page in this guide for details)
Card Options:
Slot Punch 2,5:
Signature Panel:
Front Card Finish:
Back Card Finish:
Magnetic Stripe Coercivity:
Magnetic Stripe Type:
Yes
Yes
Gloss
Gloss
High (ISO7811-6)
Standard 3 Track
No
No
Red
Yes
Surface
Yellow
No
Embedded
Horizontal
Size:
Low (ISO 7811-2)
Debitek 1/8 inch
Vertical
Other:
.
.
Anti-Counterfeiting Options:
Invisible Ink:
Micro-fine Print:
Hologram 7:
Blue
Green
Glow in the Dark
Notes:
1. Standard Composite Card is 25% Polyester and 75% PVC. A .035 inch thick card with 35% Polyester is also available. Contact Customer Service for details.
2. Some cards will have printed indicators on the back of the card to show the vertical slot punch location.
3. Some cards will have a small HID logo
and reference number, custom artwork file number, and external number (optional) printed on the card.
4. Do not order slot punched cards for use in dye sublimation printers. Slot edge may damage the printer ribbon. Slot should be punched after dye sublimation printing.
5. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering
6. Surface Holograms cannot be placed over internal electronics.
7. Representation, Warranty and Indemnity. Customer represents and warrants to HID that it owns, controls, or otherwise has the full and unrestricted right to use the custom artwork
provided to HID for use in connection with this Custom Artwork Checklist Form (the Custom Artwork) and to authorize and license HID to use and apply the Custom Artwork to the
cards in the manner provided in this Custom Artwork Checklist Form. Customer agrees to indemnify HID and hold it harmless from and against any claims, liabilities, losses and/or
expenses (including reasonable attorney fees and costs of suit) arising out of the use by HID of the Custom Artwork in the manner provided by this Custom Artwork Checklist Form or
by any custom artwork proofs approved by the Customer.
8. HID does not recommend placing custom graphics on either side of the Contact Smart Chip area.
Name:
February 2013
Signature:
© 2010 - 2013 HID Global Corporation. All rights reserved.
Date:.
Page 33 of 39
Logical Access How to Order Guide – D00538, C.3
Electronic Artwork Checklist
File Submission and Preparation
This document gives digital artwork specifications from our press department. Use these guidelines and your project should go
smoothly through the pre-press department.
MEDIA:
Submit files through E-Mail or on CD. Compressed files should be self extracting. Submitted media will not be returned to the customer.
An FTP address is available upon request for submitting media.
PLATFORM: MS WINDOWS®/Macintosh®
Projects that are set up in any of the major applications (listed below under Graphic Applications) generally translate to Macintosh®
smoothly. Save your final file with pictures embedded, outlined fonts and EPS Vector editable file.
FONTS:
Use Type 1 fonts and include screen and printer fonts on disk. Type may be converted to paths or outlines, but we cannot make copy
changes to text submitted in this form. In addition, converted type loses the benefits of PostScript font definitions; hence, type quality
may suffer. This is more noticeable in small type (-18 point).
PLACED GRAPHICS:
All placed graphics, saved as TIFF or EPS, should be included in their native program. If a Photoshop image is placed in a Quark
document, we need the Photoshop image to produce the job. Sizing, cropping, rotation, etc. should all be done to the element in its
native program and placed in Quark. Color images should be converted from RGB to CMYK. Special colors should be designated using
PMS or provide color sample to be matched. Resolution of color images, BandW halftones, or duotones should be 300 dpi.
GRAPHIC APPLICATIONS (latest version):
Adobe Photoshop® - Adobe Illustrator® - QuarkXpress®
BITMAPS AND TRACING:
Scanned line art converted to bitmaps should have a resolution of 1200 - 2400 dpi. Lower resolutions will result in jagged curves. Many
programs can convert (trace) bitmaps to vector drawings. Smoothing a traced image can be time consuming, but once completed yields
a resolution independent graphic that will provide crisp reproduction for all future uses. We can provide this service for you at our
regular file intervention rate. Minimum required DPI (dots per inch) is 300.
BLEEDS:
Incorporate 0.125 inch of overwork for all bleed images. Any portion of the image that extends to the edge of the product is considered
a bleed. Minimum required size with bleed is 2.227 x 3.477 inch for standard card size file.
MARGINS:
Elements that do not bleed should be at least 0.125 inch from the edge.
Page 34 of 39
© 2010 - 2013 HID Global Corporation. All rights reserved.
February 2013
Logical Access How to Order Guide – D00538, C.3
Anti-Counterfeiting Descriptions
Printing Types
1)
Laminated Lithographic Printing: High resolution (>3600 dpi) offset printing technology yields photographic quality
images. Laminated printing places the ink layer under a rigid clear plastic overlay which protects the printed image
from abrasion and allows you to re-print over the existing artwork on the card. The cards are compatible with all Photo
ID printing methods: dye-sub, reverse transfer and resin transfer.
2)
Surface Lithographic Printing: This process is identical to the Laminated Lithographic Printing, but the ink layer is
applied to the outer surface of the finished card and may include a clear coat. You may not be able to re-print on the
card. The inks and clear coat are not compatible with D2T2 printing (Dye Diffusion Thermal Transfer, AKA dyesublimation). The surface printing is durable enough for normal handling and use, but may wear more quickly in heavy
use or swipe (magnetic stripe) applications. It is not recommended for high use applications, or for printing critical data
such as emergency information. This process is often used for quick turnaround of simple text and graphics on card
backs.
Surface Hologram
Holograms are one of the most recognizable anti-counterfeiting devices on the market. The optically variable image cannot be
duplicated with standard printing. Surface holograms are applied via hot stamping to the exterior of the card surface. This style of
application is common to all financial transaction cards.
Embedded Hologram
Embedded holograms are positioned under the rigid clear outer layer of the card surface. Unlike surface holograms, embedded
holograms are amenable to dye sublimation – allowing the entire card surface to be personalized. This application style furthers
the effectiveness of the anti-counterfeiting feature by requiring expensive specialized equipment during manufacture.
Embedded Advantage™ Security Seal
The Advantage™ product is a specialized optically variable device that is manufactured in only one plant worldwide. It has been
the OVD of choice for many government identity documents, including many states driver licenses and the INS card. Like the
embedded hologram, this device is placed under the rigid clear outer layer and is not subject to surface abrasion and wear.
Advantage™ images shift from orange to green at different viewing angles.
Invisible Ultra-Violet (UV) Fluorescing Images
Common on credit card, currency and travel documents, invisible ink images provide a covert anti-counterfeiting mechanism.
Though blue/violet fluorescing ink is readily available and inexpensive, red, green, yellow and orange fluorescing pigments
remain difficult to acquire. This covert anti-counterfeiting device remains popular because of its relatively easy implementation in
the field.
Micro-fine Printing
Very small spot color printing that exploits the limitations of inkjet, toner based (laser) and dye sublimation printers. Counterfeit
reproductions can be determined with a handheld magnification tool.
Guilloche Printing
Fine line interlocking spot color patterns that are extremely difficult to scan and reproduce. These design elements are often
multicolor and are commonly used on currency and travel documents.
Composite Formulations
Composite formulations are designed for durable applications and for use in dye sublimation printers that employ re-transfer
technology and/or polyester laminate patches. Composite cards will minimize the warping caused by such processes. These
formulations derive their strength from combining biaxial oriented polyester (OPET) with traditional polyvinyl chloride (PVC).
February 2013
© 2010 - 2013 HID Global Corporation. All rights reserved.
Page 35 of 39
Logical Access How to Order Guide – D00538, C.3
Custom Card Artwork Placement and Inkjet Location Guides
Standard PVC and Composite PVC/Polyester Cards
Company Name:
Quantity:
Card and Artwork File No.
PO No.
Date
1. External Number:
Standard Location: The standard external # location is shown on the template below. The external # can only be printed on
the back of the card. The external # will be printed in the standard location, unless otherwise specified.
Custom Location: Indicate the desired external # location by writing 12345 on the appropriate template. The external
# can only be printed on the back of the card.
2. An Artwork File Number is placed on each card. The standard location is indicated by the CCCCC. The standard location
for the custom artwork number is on the back side of the card. Indicate/incorporate the artwork number on the artwork.
If there will be front side printing only, the custom artwork number will be placed on the printed side, opposite the standard
location.
3. Artwork Placement: Indicate the placement of your artwork on the template below. Custom artwork must clear the
slot punch locations and edges by a min. of 0.125 inch.
4. Magnetic Stripe (Optional): If the location of the magnetic stripe is custom (other than standard) and/or if other types of
magnetic stripes are to be added to the card (i.e. Debitek stripe), indicate the locations of the magnetic stripe(s) on the template.
Standard Location
Custom Location
Card Artwork Templates
Slot Punch Indicators
Front
12345 = Card ID Number
YYYYYYYY-YY = Sales Order Number Back
Contact Smart Chip location to be embedded compliant with ISO 7816 on front or back side.
HID does not recommend placing custom graphics on either side of the Contact Smart Chip area.
Notes:
1. External # location reads in the direction as shown. External # character height is approximately 0.1 inch.
2. Cards will have a small HID logo
and reference number printed in the lower left-hand corner and a slot punch target printed on the back of the card.
3. A standard custom artwork file number is printed on the back side of the card. Front side printing of this same number is an option.
4. Slot punch location indicators will appear on the back side of the card only.
5. Do not order slot punched cards for use in dye sublimation printers.
Slot edge may damage the printer ribbon. Slot should be punched after dye sublimation printing.
6. Some video imaging printers cannot accommodate pre-slot punched cards. Consult with the printer manufacturer prior to ordering.
Name:
Page 36 of 39
Signature:
© 2010 - 2013 HID Global Corporation. All rights reserved.
Date:.
February 2013
Logical Access How to Order Guide – D00538, C.3
Identity and Access Management Evaluation Kit Questionnaire
Thank you for your interest in HID’s Crescendo evaluation kit.
To acquire the best evaluation kit complete the following questionnaire.
Send your completed questionnaire to the following email address:
[email protected]
Thank you for taking the time to complete this form!
NOTE: Questions marked * are mandatory.
CONTACT DETAILS
1a. *Your name:
1b. *Name of your organisation:
1c. *Phone number:
1d. *E-mail address:
1e. *Evaluation Kit Delivery address:
Address 1:
Address 2:
Address 3:
Town/City:
ZIP/Postcode:
Country:
1f. *Nature of your business / organisation
Systems Integrator:
VAR:
Distributor:
Installer:
Reseller:
Consultant:
End-user:
Other - specify:
PROJECT INFORMATION
Do you have an upcoming project in mind - if so what type of business / organisation will the cards
be deployed in?
2a. End-user business
Local/central government:
Defence:
Police:
Utilities:
Financial services:
Other - specify:
Healthcare:
Education:
Energy:
Manufacturing:
Enterprise:
2b. Potential number of users in first year:
2c. Potential number of users over next 5 years:
2d. Likely timescales for deployment:
< 6 months
< 2 years
February 2013
< 12 months
Unknown:
© 2010 - 2013 HID Global Corporation. All rights reserved.
Page 37 of 39
Logical Access How to Order Guide – D00538, C.3
CARD REQUIREMENTS – CONTACTLESS CHIP
3a. *Physical smart card applications click all that apply:
Door Access:
ePurse / eVending / eTicket:
Time and Attendance:
Secure Print Release:
Mustering:
Car Park Access:
Loyalty/Reward scheme:
Event Management:
Other - specify:
3b. *Contactless technologies, click all that apply:
HID Prox:
Indala Prox:
iCLASS:
MIFARE:
Legic:
Other - specify
3c. Do you have any particular contactless chip coding requirements?
3d. Do you have any particular contactless chip programming requirements?
CARD REQUIREMENTS – CONTACT CHIP
4a.*Logical smart card applications click all that apply:
Secure PC / Network Logon:
Digital Signature:
Secure E-mail:
Secure VPN/SSL:
Secure Web Access:
Secure Single Sign On:
Secure Pre-boot Authentication:
Secure Disk Encryption:
Other - specify:
4b.*Contact standards support, click all that apply:
CryptoAPI / MSCAPI:
PKCS#11:
Microsoft BaseCSP / Minidriver:
PKCS#15:
FIPS140-2:
Common Criteria EAL:
FIPS 201 (PIV):
BAC/EAC:
EMV:
Other - specify:
END-USER ENVIRONMENT
5a. Which operating system(s) will the cards be used with – specify:
Server (example: Windows 2003 Server):
Client (example: Windows XP or Vista):
5b Certificate authority – specify:
(example Microsoft CA)
5c.* Do you intend to use a Card Management system. If so which one:
Microsoft ILM 2007:
Bell ID CMS:
Intercede MyID:
AET BlueX:
ActivIdentity CMS:
None:
Other - specify:
Page 38 of 39
© 2010 - 2013 HID Global Corporation. All rights reserved.
February 2013
Logical Access How to Order Guide – D00538, C.3
CARD PERSONALISATION
6a. Are you interested in having your cards graphically personalized by HID?
Yes:
No:
6b. If yes, state any requirements you may have
READERS
7a. Do you have any requirements for contact/contactless readers.
If so specify.
For more information, click here.
PRINTERS
8a. Do you have any requirements for printers.
If so, specify.
For more information, click here.
ACCESSORIES
9a. Do you have any requirements for card accessories as card holders, yoyo’s or lanyards.
If so, specify.
GENERAL
10a. Where did you hear about Crescendo:
Salesperson:
Website:
Conference:
Advert:
Existing customer:
Other - specify:
10b. When may we contact you?
10c. feel free to include any other relevant information here.
February 2013
© 2010 - 2013 HID Global Corporation. All rights reserved.
Page 39 of 39