How to Connect and Cut Single Color Inspire LED Tape Light How to calculate driver wattage Inspire LED Tape Light comes in two types: Bright and Super Bright. Inspire Bright is 1.44 watts/ft, while Inspire Super Bright is 4.32 watts/ft. To calculate the power of the driver required, simply multiply the watts/ft times the number of 1’ Inspire pieces you are going to connect into a run. Example: A 20’ run of Inspire LED Bright requires 20 ft X 1.44 watts/ft = 29 watts minimum driver size. Run Length Limits The maximum length of a run of Inspire Bright is 30’. The maximum length of a run of Inspire Super Bright is 15’. How to Connect Inspire LED Tape to a Dimmable Driver Hardwire Connector Dimmable Driver Inspire LED Tape Red Red (+24VDC) black 120V AC Black Purple (-24VDC) white Green = Ground How to separate Inspire LED Tape To disconnect and separate an individual foot length on a roll, carefully pull and then snip the red 3M away from the back of the tape, then gently pull apart. How to cut Inspire LED Tape Each foot of Inspire LED Tape Light has 18 LEDs. The arrows below indicate where the tape can be cut (every 4 “). 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 Inspire 4” 4” LED Inspirations, 11744 Grant Rd, Cypress, TX 77429 (832) 717-2710 4” 17 18
© Copyright 2024