MB MAXPro Series Meltblown Cartridges Westco’s MB MAXPro Series melt-blown polypropylene cartridges provide true depth filtration with a graded density design to maximize dirt holding capacity resulting in fewer change outs. Manufactured through an exclusive process that thermally bonds pure polypropylene he center. MB MAXPro Series Advantages • A broad range chemical compatibility • Graded density design allows higher dirt loading which equals fewer change outs • Multiple length cartridges minimize change out time, available to fit competitive filter vessels • Meets FDA Requirements • Various End –Cap and O-ring options are available • High flow rates with low pressure drops throughout the micron range FDA Listed Materials Manufactured from materials which are listed for food contact applications in Title 21 of the U.S. Code of Federal Regulations Micron Ratings Purity 1,3,5,10,20,30,50,75,100 Filter cartridges are free of surfactants, anti-static agents, binders, and adhesives. Applications Maximum Recommended Operating Conditions • Photographic Chemicals • • • • • D I Water Plating Solutions R.O. Prefiltration Bleach Potable Liquids • • • • • Dilute Acids & Alkalies Water Prefilter for Membranes Oilfeild Fluids Organic Acids & Solvents Change Out P = 20 psid (2.1 bar) P @ Ambient Temp: = 60 psi Maximum Temperature = 180 F Flow Rate = 10 gpm per 10” Length Dimensions: 2-1/2” OD x 9.75” to 50” How to Order: MB MAXPro SERIES Micron Rating MBN = Nominal MBH = High Efficiency MBA = Absolute EXAMPLE: MBN-10-30-2F Length End Cap Gasket 1 9 = 9-3/4” Blank = DOE B = Buna N 3 10 = 10” 2F = 222/Fin E = EPDM 5 19 = 19-1/2” 2C = 222/Cap V = Viton 10 20 = 20” 2S = 222/Spring T = Tef. Encap 20 29 = 29-1/4” 6F = 226/Fin S = Silicone 30 30 = 30” 6C = 226/Cap 50 39 = 39” 6S = 226/Spring 75 40 = 40” SSP = SOE Spring 100 50 = 50” SCE =SOE Ext (MB Nominal – 10 Micron – 30” Length – SOE #222/Fin)