HOW TO SETUP PTZ CRUISE/PRESET ON QT SERIES DVR PTZ cameras must be set in advance and must work well with the DVR. On the DVR, go to Menu‐Setup‐ PTZ and click on ADVANCE tab then click on SETTING under Preset Click on Setting on preset01 to setup the starting point Use the arrow to move the camera to get to the starting point and click on Save, then repeat same process for preset02 for the end point Then go back to PTZ main menu and click on SETTING under CRUISE tab (yellow box) Click on ADD button to add Cruise Click on ADD button to add Cruise You will have one entry for Cruise, click on SETUP button at the bottom Click on ADD ( + ) on the right side Select Preset 1 and click on Check Mark to save it. Click on ADD again to add Preset 2. Now you get 2 presset entry in this Cruise. Click on OK. Then Exit out the Menu Now you get 2 presset entry in this Cruise. Click on OK. Then Exit out the Menu On the Main display screen, click on PTZ icon on the Menu Bar at the bottom side. On this PTZ option select the PTZ camera channel and then click on START CRUISE On this PTZ option, select the PTZ camera channel and then click on START CRUISE.
© Copyright 2024