Download Report

MSDS# 0226 COVER SHEET
23225
Component #
23228
23209
1859078
23227F
Component #
23228
23209
1859078
NCI3227CH
Component #
1862633
1862635
1862634
Pierce® BCA Protein Assay
Kit
Description
Pierce® BCA Protein Assay
Reagent A
Albumin Standard
Pierce® BCA Protein Assay
Reagent B
Pierce® BCA Protein Assay
Kit
Description
Pierce® BCA Protein Assay
Reagent A
Albumin Standard
Pierce® BCA Protein Assay
Reagent B
Pierce® BCA Protein Assay
Kit
Description
Pierce® BCA Protein Assay
Reagent A
Albumin Standard
Pierce® BCA Protein Assay
Reagent B
23227
Component #
23228
23209
1859078
NCI3225CH
Component #
1862633
1862635
1862634
NCI23227CST
Component #
1862724
1862726
1862725
Pierce® BCA Protein Assay
Kit
Description
Pierce® BCA Protein Assay
Reagent A
Albumin Standard
Pierce® BCA Protein Assay
Reagent B
Pierce® BCA Protein Assay
Kit
Description
Pierce® BCA Protein Assay
Reagent A
Albumin Standard
Pierce® BCA Protein Assay
Reagent B
Pierce® BCA Protein Assay
Kit
Description
Pierce® BCA Protein Assay
Reagent A
Albumin Standard
Pierce® BCA Protein Assay
Reagent B
Life Science Research
PO Box 117
Rockford, IL
(815) 968-0747
Pierce Biotechnology Inc.
3747 N. Meridian Road
61105
(815) 968-7316 fax
www.thermo.com
SAFETY DATA SHEET
Pierce® BCA Protein Assay Reagent A
Section 1. Identification
GHS product identifier
Other means of identification
: Pierce® BCA Protein Assay Reagent A
Product type
Product code
SDS #
: Liquid.
: 0023221 0023222 0023222B 0023223 0023223B 0023228 1856080 1856175 1862633
1862724 1862850 1879970
: 3792
Chemical formula
: Not applicable.
CAS #
: Not applicable.
: BCA Protein Assay Reagent A
Relevant identified uses of the substance or mixture and uses advised against
Not applicable.
Supplier's details
: Thermo Fisher Scientific
Pierce Biotechnology
P.O. Box 117
Rockford, IL 61105
United States
815.968.0747 or
800.874.3723
7 AM - 5 PM Central Time (GMT -06:00)
Emergency telephone
number (with hours of
operation)
: CHEMTREC: 800.424.9300
Outside US: 703.527.3887
Section 2. Hazards identification
OSHA/HCS status
Classification of the
substance or mixture
: While this material is not considered hazardous by the OSHA Hazard Communication
Standard (29 CFR 1910.1200), this MSDS contains valuable information critical to the
safe handling and proper use of the product. This MSDS should be retained and
available for employees and other users of this product.
: Not classified.
GHS label elements
Signal word
Hazard statements
: No signal word.
: No known significant effects or critical hazards.
Precautionary statements
Prevention
: Not applicable.
Response
: Not applicable.
Storage
: Not applicable.
Disposal
Hazards not otherwise
classified
: Not applicable.
: None known.
Section 3. Composition/information on ingredients
Substance/mixture
Other means of
identification
: Mixture
: BCA Protein Assay Reagent A
CAS number/other identifiers
CAS number
Date of issue/Date of revision
: Not applicable.
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
1/10
Pierce® BCA Protein Assay Reagent A
Section 3. Composition/information on ingredients
Ingredient name
%
CAS number
sodium carbonate
[2,2'-Biquinoline]-4,4'-dicarboxylic acid, sodium salt (1:2)
1-3
1-3
497-19-8
979-88-4
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in
this section.
Occupational exposure limits, if available, are listed in Section 8.
Section 4. First aid measures
Description of necessary first aid measures
Eye contact
Inhalation
Skin contact
Ingestion
: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Get medical attention if irritation
occurs.
: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get
medical attention if symptoms occur. In case of inhalation of decomposition products in
a fire, symptoms may be delayed. The exposed person may need to be kept under
medical surveillance for 48 hours.
: Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes.
Get medical attention if symptoms occur.
: Wash out mouth with water. Remove victim to fresh air and keep at rest in a position
comfortable for breathing. If material has been swallowed and the exposed person is
conscious, give small quantities of water to drink. Do not induce vomiting unless directed
to do so by medical personnel. Get medical attention if symptoms occur.
Most important symptoms/effects, acute and delayed
Potential acute health effects
Eye contact
Inhalation
Skin contact
Ingestion
: No known significant effects or critical hazards.
: Exposure to decomposition products may cause a health hazard. Serious effects may be
delayed following exposure.
: No known significant effects or critical hazards.
: No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact
: No specific data.
Inhalation
: No specific data.
Skin contact
Ingestion
: No specific data.
: No specific data.
Indication of immediate medical attention and special treatment needed, if necessary
Notes to physician
Specific treatments
: In case of inhalation of decomposition products in a fire, symptoms may be delayed. The
exposed person may need to be kept under medical surveillance for 48 hours.
: No specific treatment.
Protection of first-aiders
: No action shall be taken involving any personal risk or without suitable training.
See toxicological information (Section 11)
Section 5. Fire-fighting measures
Extinguishing media
Suitable extinguishing
media
Unsuitable extinguishing
media
Date of issue/Date of revision
: Use an extinguishing agent suitable for the surrounding fire.
: None known.
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
2/10
Pierce® BCA Protein Assay Reagent A
Section 5. Fire-fighting measures
Specific hazards arising
from the chemical
Hazardous thermal
decomposition products
Special protective actions
for fire-fighters
Special protective
equipment for fire-fighters
: In a fire or if heated, a pressure increase will occur and the container may burst.
: Decomposition products may include the following materials:
carbon dioxide
carbon monoxide
nitrogen oxides
metal oxide/oxides
: Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training.
: Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Section 6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
For non-emergency
personnel
For emergency responders
Environmental precautions
: No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Put on appropriate personal
protective equipment.
: If specialised clothing is required to deal with the spillage, take note of any information in
Section 8 on suitable and unsuitable materials. See also the information in "For nonemergency personnel".
: Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and
sewers. Inform the relevant authorities if the product has caused environmental pollution
(sewers, waterways, soil or air).
Methods and materials for containment and cleaning up
Small spill
Large spill
: Stop leak if without risk. Move containers from spill area. Dilute with water and mop up
if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and
place in an appropriate waste disposal container. Dispose of via a licensed waste
disposal contractor.
: Stop leak if without risk. Move containers from spill area. Prevent entry into sewers,
water courses, basements or confined areas. Wash spillages into an effluent treatment
plant or proceed as follows. Contain and collect spillage with non-combustible,
absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in
container for disposal according to local regulations (see Section 13). Dispose of via a
licensed waste disposal contractor. Note: see Section 1 for emergency contact
information and Section 13 for waste disposal.
Section 7. Handling and storage
Precautions for safe handling
Protective measures
: Put on appropriate personal protective equipment (see Section 8).
Advice on general
occupational hygiene
: Eating, drinking and smoking should be prohibited in areas where this material is handled,
stored and processed. Workers should wash hands and face before eating, drinking and
smoking. Remove contaminated clothing and protective equipment before entering
eating areas. See also Section 8 for additional information on hygiene measures.
Conditions for safe storage,
including any
incompatibilities
Date of issue/Date of revision
: Store between the following temperatures: 20 to 25°C (68 to 77°F). Store in accordance
with local regulations. Store in original container protected from direct sunlight in a dry,
cool and well-ventilated area, away from incompatible materials (see Section 10) and
food and drink. Keep container tightly closed and sealed until ready for use. Containers
that have been opened must be carefully resealed and kept upright to prevent leakage.
Do not store in unlabeled containers. Use appropriate containment to avoid
environmental contamination.
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
3/10
Pierce® BCA Protein Assay Reagent A
Section 8. Exposure controls/personal protection
Control parameters
Occupational exposure limits
None.
Appropriate engineering
controls
: Good general ventilation should be sufficient to control worker exposure to airborne
contaminants.
Environmental exposure
controls
: Emissions from ventilation or work process equipment should be checked to ensure they
comply with the requirements of environmental protection legislation. In some cases,
fume scrubbers, filters or engineering modifications to the process equipment will be
necessary to reduce emissions to acceptable levels.
Individual protection measures
Hygiene measures
Eye/face protection
Skin protection
Hand protection
Body protection
Other skin protection
Respiratory protection
: Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period. Appropriate
techniques should be used to remove potentially contaminated clothing. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety showers
are close to the workstation location.
: Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn, unless the
assessment indicates a higher degree of protection: safety glasses with side-shields.
: Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary.
: Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before handling
this product.
: Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
: Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Section 9. Physical and chemical properties
Appearance
Physical state
Color
Odor
Odor threshold
pH
: Liquid. [Clear sparkling liquid.]
: Colorless to light yellow.
: Odorless.
: Not available.
Melting point
Boiling point
: 11.15 to 11.35
: Not available.
: Not available.
Flash point
: [Product does not sustain combustion.]
Burning time
: Not applicable.
Burning rate
: Not applicable.
Evaporation rate
: Not available.
Flammability (solid, gas)
: Not available.
Lower and upper explosive
(flammable) limits
Vapor pressure
: Not available.
Vapor density
: Not available.
Date of issue/Date of revision
: Not available.
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
4/10
Pierce® BCA Protein Assay Reagent A
Section 9. Physical and chemical properties
Relative density
: 1.03
Solubility
Solubility in water
: Easily soluble in the following materials: cold water and hot water.
: Not available.
Partition coefficient: noctanol/water
Auto-ignition temperature
: Not available.
Decomposition temperature
SADT
: Not available.
: Not available.
Viscosity
: Not available.
: Not available.
Section 10. Stability and reactivity
Reactivity
: No specific test data related to reactivity available for this product or its ingredients.
Chemical stability
: The product is stable.
Possibility of hazardous
reactions
: Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to avoid
: No specific data.
Incompatible materials
: No specific data.
Hazardous decomposition
products
: Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
Section 11. Toxicological information
Information on toxicological effects
Acute toxicity
Product/ingredient name
Result
Species
sodium carbonate
LD50 Oral
Rat
Dose
Exposure
4090 mg/kg
-
Irritation/Corrosion
Product/ingredient name
Result
Species
Score
Exposure
Observation
sodium carbonate
Eyes - Mild irritant
Rabbit
-
-
Eyes - Moderate irritant
Rabbit
-
Eyes - Severe irritant
Skin - Mild irritant
Rabbit
Rabbit
-
0.5 minutes
100 milligrams
24 hours 100
milligrams
50 milligrams
24 hours 500
milligrams
-
Sensitization
Not available.
Mutagenicity
Not available.
Carcinogenicity
Not available.
Reproductive toxicity
Not available.
Teratogenicity
Not available.
Specific target organ toxicity (single exposure)
Date of issue/Date of revision
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
5/10
Pierce® BCA Protein Assay Reagent A
Section 11. Toxicological information
Name
Category
Route of
exposure
Target organs
[2,2'-Biquinoline]-4,4'-dicarboxylic acid, sodium salt (1:2)
Category 3
Not applicable.
Respiratory tract
irritation
Specific target organ toxicity (repeated exposure)
Not available.
Aspiration hazard
Not available.
Information on the likely
routes of exposure
: Routes of entry anticipated: Oral, Dermal, Inhalation.
Potential acute health effects
Eye contact
: No known significant effects or critical hazards.
Inhalation
Skin contact
: Exposure to decomposition products may cause a health hazard. Serious effects may be
delayed following exposure.
: No known significant effects or critical hazards.
Ingestion
: No known significant effects or critical hazards.
Symptoms related to the physical, chemical and toxicological characteristics
Eye contact
: No specific data.
Inhalation
: No specific data.
Skin contact
: No specific data.
Ingestion
: No specific data.
Delayed and immediate effects and also chronic effects from short and long term exposure
Short term exposure
Potential immediate
: Not available.
effects
Potential delayed effects
Long term exposure
Potential immediate
effects
Potential delayed effects
: Not available.
: Not available.
: Not available.
Potential chronic health effects
Not available.
General
: No known significant effects or critical hazards.
Carcinogenicity
: No known significant effects or critical hazards.
Mutagenicity
: No known significant effects or critical hazards.
Teratogenicity
: No known significant effects or critical hazards.
Developmental effects
: No known significant effects or critical hazards.
Fertility effects
: No known significant effects or critical hazards.
Numerical measures of toxicity
Acute toxicity estimates
Route
ATE value
Oral
239181.3 mg/kg
Date of issue/Date of revision
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
6/10
Pierce® BCA Protein Assay Reagent A
Section 12. Ecological information
Toxicity
Product/ingredient name
Result
Species
Exposure
sodium carbonate
Acute EC50 242000 µg/l Fresh water
Acute LC50 176000 µg/l Fresh water
Acute LC50 265000 µg/l Fresh water
Acute LC50 300000 µg/l Fresh water
Algae - Navicula seminulum
Crustaceans - Amphipoda
Daphnia - Daphnia magna
Fish - Lepomis macrochirus
96 hours
48 hours
48 hours
96 hours
Persistence and degradability
Not available.
Bioaccumulative potential
Not available.
Mobility in soil
Soil/water partition
coefficient (KOC)
: Not available.
Other adverse effects
: No known significant effects or critical hazards.
Section 13. Disposal considerations
Disposal methods
: The generation of waste should be avoided or minimized wherever possible. Disposal of
this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any regional
local authority requirements. Dispose of surplus and non-recyclable products via a
licensed waste disposal contractor. Waste should not be disposed of untreated to the
sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Empty containers or liners may retain some product residues. Avoid dispersal
of spilled material and runoff and contact with soil, waterways, drains and sewers.
Section 14. Transport information
DOT Classification
IATA
UN number
Not regulated.
Not regulated.
UN proper
shipping name
-
-
Transport
hazard class(es)
-
Packing group
-
-
Environmental
hazards
No.
No.
Additional
information
-
-
Special precautions for user
Date of issue/Date of revision
: Transport within user’s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in the
event of an accident or spillage.
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
7/10
Pierce® BCA Protein Assay Reagent A
Section 14. Transport information
Transport in bulk according
to Annex II of MARPOL
73/78 and the IBC Code
: Not available.
Section 15. Regulatory information
U.S. Federal regulations
: TSCA 8(a) CDR Exempt/Partial exemption: Not determined
United States inventory (TSCA 8b): All components are listed or exempted.
Clean Water Act (CWA) 311: sodium hydroxide
Clean Air Act Section 112
(b) Hazardous Air
Pollutants (HAPs)
: Not listed
Clean Air Act Section 602
Class I Substances
: Not listed
Clean Air Act Section 602
Class II Substances
: Not listed
DEA List I Chemicals
(Precursor Chemicals)
: Not listed
DEA List II Chemicals
(Essential Chemicals)
: Not listed
SARA 302/304
Composition/information on ingredients
No products were found.
SARA 304 RQ
: Not applicable.
SARA 311/312
Classification
: Not applicable.
Composition/information on ingredients
Name
%
sodium carbonate
1-3
[2,2'-Biquinoline]-4,4'-dicarboxylic acid, 1 - 3
sodium salt (1:2)
Fire
Sudden
hazard release of
pressure
Reactive
Immediate
(acute)
health
hazard
Delayed
(chronic)
health
hazard
No.
No.
No.
No.
Yes.
Yes.
No.
No.
No.
No.
State regulations
Massachusetts
: None of the components are listed.
New York
: None of the components are listed.
New Jersey
: None of the components are listed.
Pennsylvania
: None of the components are listed.
Canada inventory
: All components are listed or exempted.
International regulations
International lists
Chemical Weapons
Convention List Schedule I
Chemicals
Date of issue/Date of revision
: Australia inventory (AICS): Not determined.
China inventory (IECSC): Not determined.
Japan inventory: Not determined.
Korea inventory: All components are listed or exempted.
Malaysia Inventory (EHS Register): Not determined.
New Zealand Inventory of Chemicals (NZIoC): All components are listed or exempted.
Philippines inventory (PICCS): Not determined.
Taiwan inventory (CSNN): Not determined.
: Not listed
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
8/10
Pierce® BCA Protein Assay Reagent A
Section 15. Regulatory information
Chemical Weapons
Convention List Schedule
II Chemicals
: Not listed
Chemical Weapons
Convention List Schedule
III Chemicals
: Not listed
Section 16. Other information
Hazardous Material Information System (U.S.A.)
Health
0
Chronic Health Hazard
Flammability
0
Physical hazards
0
National Fire Protection Association (U.S.A.)
Health
0
Flammability
0
Instability/Reactivity
0
Special
The customer is responsible for determining the PPE code for this material.
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks Although HMIS® ratings are not required on SDSs under 29 CFR 1910.
1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS®
program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS® materials may
be purchased exclusively from J. J. Keller (800) 327-6868.
Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency
Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is
not the complete and official position of the National Fire Protection Association, on the referenced subject
which is represented only by the standard in its entirety.
Copyright ©2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to be
interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of
chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA
49 and NFPA 325, which would be used as a guideline only. Whether the chemicals are classified by NFPA or not,
anyone using the 704 systems to classify chemicals does so at their own risk.
History
Date of printing
: 12/11/2013.
Date of issue/Date of
revision
Date of previous issue
: 11/13/2013.
Version
: 1
Prepared by
Key to abbreviations
References
: No previous validation.
: MSDS (Regulatory Specialist)
: ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL 73/78 = International Convention for the Prevention of Pollution From Ships,
1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)
UN = United Nations
: Not available.
Indicates information that has changed from previously issued version.
Notice to reader
Date of issue/Date of revision
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
9/10
Pierce® BCA Protein Assay Reagent A
Section 16. Other information
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist.
Date of issue/Date of revision
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
10/10
SAFETY DATA SHEET
Albumin Standard
Section 1. Identification
GHS product identifier
: Albumin Standard
Other means of identification
: Not available.
Product type
Product code
: Liquid.
: 0023209 0023209F 0023210 0023210B 1856269 1862635 1862726 1878740 NCI2320
SDS #
: 0225
Chemical formula
: Not applicable.
CAS #
: Not applicable.
Relevant identified uses of the substance or mixture and uses advised against
Not applicable.
Supplier's details
: Thermo Fisher Scientific
Pierce Biotechnology
P.O. Box 117
Rockford, IL 61105
United States
815.968.0747 or
800.874.3723
7 AM - 5 PM Central Time (GMT -06:00)
Emergency telephone
number (with hours of
operation)
: CHEMTREC: 800.424.9300
Outside US: 703.527.3887
Section 2. Hazards identification
OSHA/HCS status
Classification of the
substance or mixture
: While this material is not considered hazardous by the OSHA Hazard Communication
Standard (29 CFR 1910.1200), this MSDS contains valuable information critical to the
safe handling and proper use of the product. This MSDS should be retained and
available for employees and other users of this product.
: Not classified.
GHS label elements
Signal word
: No signal word.
Hazard statements
: No known significant effects or critical hazards.
Precautionary statements
Prevention
: Not applicable.
Response
: Not applicable.
Storage
: Not applicable.
Disposal
: Not applicable.
Hazards not otherwise
classified
: None known.
Section 3. Composition/information on ingredients
Substance/mixture
: Mixture
Other means of
identification
: Not available.
CAS number/other identifiers
CAS number
Date of issue/Date of revision
: Not applicable.
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
1/9
Albumin Standard
Section 3. Composition/information on ingredients
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
There are no ingredients present which, within the current knowledge of the supplier and in the concentrations
applicable, are classified as hazardous to health or the environment and hence require reporting in this section.
Occupational exposure limits, if available, are listed in Section 8.
Section 4. First aid measures
Description of necessary first aid measures
Eye contact
Inhalation
Skin contact
Ingestion
: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Get medical attention if irritation
occurs.
: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get
medical attention if symptoms occur.
: Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes.
Get medical attention if symptoms occur.
: Wash out mouth with water. Remove victim to fresh air and keep at rest in a position
comfortable for breathing. If material has been swallowed and the exposed person is
conscious, give small quantities of water to drink. Do not induce vomiting unless directed
to do so by medical personnel. Get medical attention if symptoms occur.
Most important symptoms/effects, acute and delayed
Potential acute health effects
Eye contact
: No known significant effects or critical hazards.
Inhalation
Skin contact
: No known significant effects or critical hazards.
: No known significant effects or critical hazards.
Ingestion
: No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact
: No specific data.
Inhalation
: No specific data.
Skin contact
: No specific data.
Ingestion
: No specific data.
Indication of immediate medical attention and special treatment needed, if necessary
Notes to physician
Specific treatments
: Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
: No specific treatment.
Protection of first-aiders
: No action shall be taken involving any personal risk or without suitable training.
See toxicological information (Section 11)
Section 5. Fire-fighting measures
Extinguishing media
Suitable extinguishing
media
: Use an extinguishing agent suitable for the surrounding fire.
Unsuitable extinguishing
media
: None known.
Specific hazards arising
from the chemical
Hazardous thermal
decomposition products
Special protective actions
for fire-fighters
Date of issue/Date of revision
: In a fire or if heated, a pressure increase will occur and the container may burst.
: No specific data.
: Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training.
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
2/9
Albumin Standard
Section 5. Fire-fighting measures
Special protective
equipment for fire-fighters
: Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Section 6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
For non-emergency
personnel
For emergency responders
Environmental precautions
: No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Put on appropriate personal
protective equipment.
: If specialised clothing is required to deal with the spillage, take note of any information in
Section 8 on suitable and unsuitable materials. See also the information in "For nonemergency personnel".
: Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and
sewers. Inform the relevant authorities if the product has caused environmental pollution
(sewers, waterways, soil or air).
Methods and materials for containment and cleaning up
Small spill
Large spill
: Stop leak if without risk. Move containers from spill area. Dilute with water and mop up
if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and
place in an appropriate waste disposal container. Dispose of via a licensed waste
disposal contractor.
: Stop leak if without risk. Move containers from spill area. Prevent entry into sewers,
water courses, basements or confined areas. Wash spillages into an effluent treatment
plant or proceed as follows. Contain and collect spillage with non-combustible,
absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in
container for disposal according to local regulations (see Section 13). Dispose of via a
licensed waste disposal contractor. Note: see Section 1 for emergency contact
information and Section 13 for waste disposal.
Section 7. Handling and storage
Precautions for safe handling
Protective measures
: Put on appropriate personal protective equipment (see Section 8).
Advice on general
occupational hygiene
: Eating, drinking and smoking should be prohibited in areas where this material is handled,
stored and processed. Workers should wash hands and face before eating, drinking and
smoking. Remove contaminated clothing and protective equipment before entering
eating areas. See also Section 8 for additional information on hygiene measures.
Conditions for safe storage,
including any
incompatibilities
: Store in accordance with local regulations. Store in original container protected from
direct sunlight in a dry, cool and well-ventilated area, away from incompatible materials
(see Section 10) and food and drink. Keep container tightly closed and sealed until ready
for use. Containers that have been opened must be carefully resealed and kept upright
to prevent leakage. Do not store in unlabeled containers. Use appropriate containment
to avoid environmental contamination.
Section 8. Exposure controls/personal protection
Control parameters
Occupational exposure limits
None.
Appropriate engineering
controls
Environmental exposure
controls
Date of issue/Date of revision
: Good general ventilation should be sufficient to control worker exposure to airborne
contaminants.
: Emissions from ventilation or work process equipment should be checked to ensure they
comply with the requirements of environmental protection legislation. In some cases,
fume scrubbers, filters or engineering modifications to the process equipment will be
necessary to reduce emissions to acceptable levels.
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
3/9
Albumin Standard
Section 8. Exposure controls/personal protection
Individual protection measures
Hygiene measures
Eye/face protection
: Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period. Appropriate
techniques should be used to remove potentially contaminated clothing. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety showers
are close to the workstation location.
: Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn, unless the
assessment indicates a higher degree of protection: safety glasses with side-shields.
Skin protection
Hand protection
Body protection
Other skin protection
Respiratory protection
: Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary.
: Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before handling
this product.
: Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
: Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Section 9. Physical and chemical properties
Appearance
Physical state
: Liquid. [Clear sparkling liquid.]
Color
: Colorless to light yellow.
Odor
Odor threshold
: Odorless.
: Not available.
pH
Melting point
: Not available.
: Not available.
Boiling point
: Not available.
Flash point
Burning time
: [Product does not sustain combustion.]
: Not applicable.
Burning rate
Evaporation rate
: Not applicable.
: Not available.
Flammability (solid, gas)
: Not available.
Lower and upper explosive
(flammable) limits
Vapor pressure
Vapor density
: Not available.
Relative density
: Not available.
: Not available.
: Not available.
Solubility
: Easily soluble in the following materials: cold water and hot water.
Solubility in water
: Not available.
Partition coefficient: noctanol/water
Auto-ignition temperature
Decomposition temperature
: Not available.
SADT
: Not available.
Viscosity
: Not available.
Date of issue/Date of revision
: Not available.
: Not available.
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
4/9
Albumin Standard
Section 10. Stability and reactivity
Reactivity
: No specific test data related to reactivity available for this product or its ingredients.
Chemical stability
: The product is stable.
Possibility of hazardous
reactions
: Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to avoid
: No specific data.
Incompatible materials
: No specific data.
Hazardous decomposition
products
: Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
Section 11. Toxicological information
Information on toxicological effects
Acute toxicity
Not available.
Conclusion/Summary
: To the best of our knowledge, the toxicological properties of this product have not been
thoroughly investigated.
Irritation/Corrosion
Not available.
Sensitization
Not available.
Mutagenicity
Not available.
Carcinogenicity
Not available.
Reproductive toxicity
Not available.
Teratogenicity
Not available.
Specific target organ toxicity (single exposure)
Not available.
Specific target organ toxicity (repeated exposure)
Not available.
Aspiration hazard
Not available.
Information on the likely
routes of exposure
: Routes of entry anticipated: Oral, Inhalation.
Potential acute health effects
Eye contact
: No known significant effects or critical hazards.
Inhalation
: No known significant effects or critical hazards.
Skin contact
: No known significant effects or critical hazards.
Ingestion
: No known significant effects or critical hazards.
Symptoms related to the physical, chemical and toxicological characteristics
Date of issue/Date of revision
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
5/9
Albumin Standard
Section 11. Toxicological information
Eye contact
Inhalation
: No specific data.
: No specific data.
Skin contact
: No specific data.
Ingestion
: No specific data.
Delayed and immediate effects and also chronic effects from short and long term exposure
Short term exposure
Potential immediate
: Not available.
effects
Potential delayed effects
: Not available.
Long term exposure
Potential immediate
effects
Potential delayed effects
: Not available.
: Not available.
Potential chronic health effects
Not available.
General
Carcinogenicity
: No known significant effects or critical hazards.
: No known significant effects or critical hazards.
Mutagenicity
: No known significant effects or critical hazards.
Teratogenicity
: No known significant effects or critical hazards.
Developmental effects
: No known significant effects or critical hazards.
Fertility effects
: No known significant effects or critical hazards.
Numerical measures of toxicity
Acute toxicity estimates
Not available.
Section 12. Ecological information
Toxicity
Not available.
Persistence and degradability
Not available.
Bioaccumulative potential
Not available.
Mobility in soil
Soil/water partition
coefficient (KOC)
Other adverse effects
Date of issue/Date of revision
: Not available.
: No known significant effects or critical hazards.
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
6/9
Albumin Standard
Section 13. Disposal considerations
Disposal methods
: The generation of waste should be avoided or minimized wherever possible. Disposal of
this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any regional
local authority requirements. Dispose of surplus and non-recyclable products via a
licensed waste disposal contractor. Waste should not be disposed of untreated to the
sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Empty containers or liners may retain some product residues. Avoid dispersal
of spilled material and runoff and contact with soil, waterways, drains and sewers.
Section 14. Transport information
DOT Classification
IATA
UN number
Not regulated.
Not regulated.
UN proper
shipping name
-
-
Transport
hazard class(es)
-
Packing group
-
-
Environmental
hazards
No.
No.
Additional
information
-
-
Special precautions for user
: Transport within user’s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in the
event of an accident or spillage.
Transport in bulk according
to Annex II of MARPOL
73/78 and the IBC Code
: Not available.
Section 15. Regulatory information
U.S. Federal regulations
: TSCA 8(a) CDR Exempt/Partial exemption: Not determined
United States inventory (TSCA 8b): All components are listed or exempted.
Clean Air Act Section 112
(b) Hazardous Air
Pollutants (HAPs)
: Not listed
Clean Air Act Section 602
Class I Substances
: Not listed
Clean Air Act Section 602
Class II Substances
: Not listed
DEA List I Chemicals
(Precursor Chemicals)
: Not listed
DEA List II Chemicals
(Essential Chemicals)
: Not listed
SARA 302/304
Composition/information on ingredients
Date of issue/Date of revision
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
7/9
Albumin Standard
Section 15. Regulatory information
SARA 302 TPQ
SARA 304 RQ
Name
%
EHS
(lbs)
(gallons)
(lbs)
(gallons)
sodium azide
0 - 0.1
Yes.
500
-
1000
-
SARA 304 RQ
: 2000000 lbs / 908000 kg
SARA 311/312
Classification
: Not applicable.
Composition/information on ingredients
No products were found.
State regulations
Massachusetts
: None of the components are listed.
New York
New Jersey
: None of the components are listed.
: None of the components are listed.
Pennsylvania
: None of the components are listed.
Canada inventory
: All components are listed or exempted.
International regulations
International lists
Chemical Weapons
Convention List Schedule I
Chemicals
: Australia inventory (AICS): All components are listed or exempted.
China inventory (IECSC): All components are listed or exempted.
Japan inventory: Not determined.
Korea inventory: All components are listed or exempted.
Malaysia Inventory (EHS Register): Not determined.
New Zealand Inventory of Chemicals (NZIoC): All components are listed or exempted.
Philippines inventory (PICCS): All components are listed or exempted.
Taiwan inventory (CSNN): Not determined.
: Not listed
Chemical Weapons
Convention List Schedule
II Chemicals
: Not listed
Chemical Weapons
Convention List Schedule
III Chemicals
: Not listed
Section 16. Other information
Hazardous Material Information System (U.S.A.)
Health
0
Chronic Health Hazard
Flammability
0
Physical hazards
0
National Fire Protection Association (U.S.A.)
Health
0
Flammability
0
Instability/Reactivity
0
Special
The customer is responsible for determining the PPE code for this material.
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks Although HMIS® ratings are not required on SDSs under 29 CFR 1910.
1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS®
program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS® materials may
be purchased exclusively from J. J. Keller (800) 327-6868.
Date of issue/Date of revision
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
8/9
Albumin Standard
Section 16. Other information
Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency
Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is
not the complete and official position of the National Fire Protection Association, on the referenced subject
which is represented only by the standard in its entirety.
Copyright ©2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to be
interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of
chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA
49 and NFPA 325, which would be used as a guideline only. Whether the chemicals are classified by NFPA or not,
anyone using the 704 systems to classify chemicals does so at their own risk.
History
Date of printing
: 12/11/2013.
Date of issue/Date of
revision
Date of previous issue
: 11/13/2013.
Version
Prepared by
: 1
: MSDS (Regulatory Specialist)
Key to abbreviations
References
: No previous validation.
: ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL 73/78 = International Convention for the Prevention of Pollution From Ships,
1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)
UN = United Nations
: Not available.
Indicates information that has changed from previously issued version.
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist.
Date of issue/Date of revision
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
9/9
SAFETY DATA SHEET
Pierce® BCA Reagents
Section 1. Identification
GHS product identifier
: Pierce® BCA Reagents
Other means of identification
: Pierce® BCA Protein Assay Reagent B; Pierce® Micro BCA Reagent C; BCA Reagent B
Product type
Product code
: Liquid.
: 0023224 0023224B 0023234 1856056 1859068 1859078 1862634 1862725 1879980
SDS #
: 2250
Chemical formula
: Not applicable.
CAS #
: Not applicable.
Relevant identified uses of the substance or mixture and uses advised against
Not applicable.
Supplier's details
: Thermo Fisher Scientific
Pierce Biotechnology
P.O. Box 117
Rockford, IL 61105
United States
815.968.0747 or
800.874.3723
7 AM - 5 PM Central Time (GMT -06:00)
Emergency telephone
number (with hours of
operation)
: CHEMTREC: 800.424.9300
Outside US: 703.527.3887
Section 2. Hazards identification
OSHA/HCS status
Classification of the
substance or mixture
: While this material is not considered hazardous by the OSHA Hazard Communication
Standard (29 CFR 1910.1200), this MSDS contains valuable information critical to the
safe handling and proper use of the product. This MSDS should be retained and
available for employees and other users of this product.
: Not classified.
GHS label elements
Signal word
: No signal word.
Hazard statements
: No known significant effects or critical hazards.
Precautionary statements
Prevention
: Not applicable.
Response
: Not applicable.
Storage
: Not applicable.
Disposal
: Not applicable.
Hazards not otherwise
classified
: None known.
Section 3. Composition/information on ingredients
Substance/mixture
: Mixture
Other means of
identification
: Pierce® BCA Protein Assay Reagent B; Pierce® Micro BCA Reagent C; BCA Reagent B
CAS number/other identifiers
CAS number
Date of issue/Date of revision
: Not applicable.
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
1/10
Pierce® BCA Reagents
Section 3. Composition/information on ingredients
Ingredient name
%
CAS number
Sulfuric acid copper(2+) salt (1:1), hydrate (1:5)
3-5
7758-99-8
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting in
this section.
Occupational exposure limits, if available, are listed in Section 8.
Section 4. First aid measures
Description of necessary first aid measures
Eye contact
Inhalation
Skin contact
Ingestion
: Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Get medical attention if irritation
occurs.
: Remove victim to fresh air and keep at rest in a position comfortable for breathing. Get
medical attention if symptoms occur.
: Flush contaminated skin with plenty of water. Remove contaminated clothing and shoes.
Get medical attention if symptoms occur.
: Wash out mouth with water. Remove victim to fresh air and keep at rest in a position
comfortable for breathing. If material has been swallowed and the exposed person is
conscious, give small quantities of water to drink. Do not induce vomiting unless directed
to do so by medical personnel. Get medical attention if symptoms occur.
Most important symptoms/effects, acute and delayed
Potential acute health effects
Eye contact
: No known significant effects or critical hazards.
Inhalation
: No known significant effects or critical hazards.
Skin contact
: No known significant effects or critical hazards.
Ingestion
: No known significant effects or critical hazards.
Over-exposure signs/symptoms
Eye contact
: No specific data.
Inhalation
: No specific data.
Skin contact
: No specific data.
Ingestion
: No specific data.
Indication of immediate medical attention and special treatment needed, if necessary
Notes to physician
Specific treatments
: Treat symptomatically. Contact poison treatment specialist immediately if large
quantities have been ingested or inhaled.
: No specific treatment.
Protection of first-aiders
: No action shall be taken involving any personal risk or without suitable training.
See toxicological information (Section 11)
Section 5. Fire-fighting measures
Extinguishing media
Suitable extinguishing
media
Unsuitable extinguishing
media
Specific hazards arising
from the chemical
Date of issue/Date of revision
: Use an extinguishing agent suitable for the surrounding fire.
: None known.
: In a fire or if heated, a pressure increase will occur and the container may burst.
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
2/10
Pierce® BCA Reagents
Section 5. Fire-fighting measures
Hazardous thermal
decomposition products
Special protective actions
for fire-fighters
Special protective
equipment for fire-fighters
: Decomposition products may include the following materials:
sulfur oxides
metal oxide/oxides
: Promptly isolate the scene by removing all persons from the vicinity of the incident if
there is a fire. No action shall be taken involving any personal risk or without suitable
training.
: Fire-fighters should wear appropriate protective equipment and self-contained breathing
apparatus (SCBA) with a full face-piece operated in positive pressure mode.
Section 6. Accidental release measures
Personal precautions, protective equipment and emergency procedures
For non-emergency
personnel
For emergency responders
Environmental precautions
: No action shall be taken involving any personal risk or without suitable training.
Evacuate surrounding areas. Keep unnecessary and unprotected personnel from
entering. Do not touch or walk through spilled material. Put on appropriate personal
protective equipment.
: If specialised clothing is required to deal with the spillage, take note of any information in
Section 8 on suitable and unsuitable materials. See also the information in "For nonemergency personnel".
: Avoid dispersal of spilled material and runoff and contact with soil, waterways, drains and
sewers. Inform the relevant authorities if the product has caused environmental pollution
(sewers, waterways, soil or air).
Methods and materials for containment and cleaning up
Small spill
Large spill
: Stop leak if without risk. Move containers from spill area. Dilute with water and mop up
if water-soluble. Alternatively, or if water-insoluble, absorb with an inert dry material and
place in an appropriate waste disposal container. Dispose of via a licensed waste
disposal contractor.
: Stop leak if without risk. Move containers from spill area. Prevent entry into sewers,
water courses, basements or confined areas. Wash spillages into an effluent treatment
plant or proceed as follows. Contain and collect spillage with non-combustible,
absorbent material e.g. sand, earth, vermiculite or diatomaceous earth and place in
container for disposal according to local regulations (see Section 13). Dispose of via a
licensed waste disposal contractor. Note: see Section 1 for emergency contact
information and Section 13 for waste disposal.
Section 7. Handling and storage
Precautions for safe handling
Protective measures
: Put on appropriate personal protective equipment (see Section 8).
Advice on general
occupational hygiene
: Eating, drinking and smoking should be prohibited in areas where this material is handled,
stored and processed. Workers should wash hands and face before eating, drinking and
smoking. Remove contaminated clothing and protective equipment before entering
eating areas. See also Section 8 for additional information on hygiene measures.
Conditions for safe storage,
including any
incompatibilities
Date of issue/Date of revision
: Store between the following temperatures: 20 to 25°C (68 to 77°F). Store in accordance
with local regulations. Store in original container protected from direct sunlight in a dry,
cool and well-ventilated area, away from incompatible materials (see Section 10) and
food and drink. Keep container tightly closed and sealed until ready for use. Containers
that have been opened must be carefully resealed and kept upright to prevent leakage.
Do not store in unlabeled containers. Use appropriate containment to avoid
environmental contamination.
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
3/10
Pierce® BCA Reagents
Section 8. Exposure controls/personal protection
Control parameters
Occupational exposure limits
Ingredient name
Exposure limits
Sulfuric acid copper(2+) salt (1:1), hydrate (1:5)
ACGIH TLV (United States).
TWA: 1 mg/m³
NIOSH REL (United States).
TWA: 1 mg/m³
Appropriate engineering
controls
: Good general ventilation should be sufficient to control worker exposure to airborne
contaminants.
Environmental exposure
controls
: Emissions from ventilation or work process equipment should be checked to ensure they
comply with the requirements of environmental protection legislation. In some cases,
fume scrubbers, filters or engineering modifications to the process equipment will be
necessary to reduce emissions to acceptable levels.
Individual protection measures
Hygiene measures
Eye/face protection
Skin protection
Hand protection
Body protection
Other skin protection
Respiratory protection
: Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period. Appropriate
techniques should be used to remove potentially contaminated clothing. Wash
contaminated clothing before reusing. Ensure that eyewash stations and safety showers
are close to the workstation location.
: Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn, unless the
assessment indicates a higher degree of protection: safety glasses with side-shields.
: Chemical-resistant, impervious gloves complying with an approved standard should be
worn at all times when handling chemical products if a risk assessment indicates this is
necessary.
: Personal protective equipment for the body should be selected based on the task being
performed and the risks involved and should be approved by a specialist before handling
this product.
: Appropriate footwear and any additional skin protection measures should be selected
based on the task being performed and the risks involved and should be approved by a
specialist before handling this product.
: Use a properly fitted, air-purifying or air-fed respirator complying with an approved
standard if a risk assessment indicates this is necessary. Respirator selection must be
based on known or anticipated exposure levels, the hazards of the product and the safe
working limits of the selected respirator.
Section 9. Physical and chemical properties
Appearance
Physical state
: Liquid.
Color
: Blue.
Odor
Odor threshold
pH
: Not available.
: Not available.
Melting point
: Not available.
: Not available.
Boiling point
: Not available.
Flash point
: [Product does not sustain combustion.]
Burning time
: Not applicable.
Burning rate
: Not applicable.
Evaporation rate
: Not available.
Flammability (solid, gas)
: Not available.
Date of issue/Date of revision
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
4/10
Pierce® BCA Reagents
Section 9. Physical and chemical properties
Lower and upper explosive
(flammable) limits
: Not available.
Vapor pressure
: Not available.
Vapor density
Relative density
: Not available.
: Not available.
Solubility
: Easily soluble in the following materials: cold water and hot water.
Solubility in water
: Not available.
Partition coefficient: noctanol/water
: Not available.
Auto-ignition temperature
: Not available.
Decomposition temperature
: Not available.
SADT
: Not available.
Viscosity
: Not available.
Section 10. Stability and reactivity
Reactivity
: No specific test data related to reactivity available for this product or its ingredients.
Chemical stability
: The product is stable.
Possibility of hazardous
reactions
: Under normal conditions of storage and use, hazardous reactions will not occur.
Conditions to avoid
: No specific data.
Incompatible materials
: No specific data.
Hazardous decomposition
products
: Under normal conditions of storage and use, hazardous decomposition products should
not be produced.
Section 11. Toxicological information
Information on toxicological effects
Acute toxicity
Product/ingredient name
Result
Species
Sulfuric acid copper(2+) salt
(1:1), hydrate (1:5)
LD50 Oral
Rat
Conclusion/Summary
Dose
300 mg/kg
Exposure
-
: To the best of our knowledge, the toxicological properties of this product have not been
thoroughly investigated.
Irritation/Corrosion
Not available.
Sensitization
Not available.
Mutagenicity
Not available.
Carcinogenicity
Not available.
Reproductive toxicity
Not available.
Teratogenicity
Not available.
Date of issue/Date of revision
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
5/10
Pierce® BCA Reagents
Section 11. Toxicological information
Specific target organ toxicity (single exposure)
Not available.
Specific target organ toxicity (repeated exposure)
Not available.
Aspiration hazard
Not available.
Information on the likely
routes of exposure
: Routes of entry anticipated: Oral, Dermal, Inhalation.
Potential acute health effects
Eye contact
: No known significant effects or critical hazards.
Inhalation
: No known significant effects or critical hazards.
Skin contact
: No known significant effects or critical hazards.
Ingestion
: No known significant effects or critical hazards.
Symptoms related to the physical, chemical and toxicological characteristics
Eye contact
: No specific data.
Inhalation
: No specific data.
Skin contact
: No specific data.
Ingestion
: No specific data.
Delayed and immediate effects and also chronic effects from short and long term exposure
Short term exposure
Potential immediate
: Not available.
effects
Potential delayed effects
Long term exposure
Potential immediate
effects
Potential delayed effects
: Not available.
: Not available.
: Not available.
Potential chronic health effects
Not available.
General
: No known significant effects or critical hazards.
Carcinogenicity
: No known significant effects or critical hazards.
Mutagenicity
: No known significant effects or critical hazards.
Teratogenicity
: No known significant effects or critical hazards.
Developmental effects
: No known significant effects or critical hazards.
Fertility effects
: No known significant effects or critical hazards.
Numerical measures of toxicity
Acute toxicity estimates
Route
ATE value
Oral
7500 mg/kg
Date of issue/Date of revision
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
6/10
Pierce® BCA Reagents
Section 12. Ecological information
Toxicity
Product/ingredient name
Result
Species
Exposure
Sulfuric acid copper(2+) salt
(1:1), hydrate (1:5)
EC50 0.024 mg/l
Daphnia
48 hours
Acute LC50 0.032 ppm Fresh water
Fish - Oncorhynchus mykiss
96 hours
Persistence and degradability
Not available.
Bioaccumulative potential
Not available.
Mobility in soil
Soil/water partition
coefficient (KOC)
Other adverse effects
: Not available.
: No known significant effects or critical hazards.
Section 13. Disposal considerations
Disposal methods
: The generation of waste should be avoided or minimized wherever possible. Disposal of
this product, solutions and any by-products should at all times comply with the
requirements of environmental protection and waste disposal legislation and any regional
local authority requirements. Dispose of surplus and non-recyclable products via a
licensed waste disposal contractor. Waste should not be disposed of untreated to the
sewer unless fully compliant with the requirements of all authorities with jurisdiction.
Waste packaging should be recycled. Incineration or landfill should only be considered
when recycling is not feasible. This material and its container must be disposed of in a
safe way. Empty containers or liners may retain some product residues. Avoid dispersal
of spilled material and runoff and contact with soil, waterways, drains and sewers.
Section 14. Transport information
DOT Classification
IATA
UN number
UN3082
UN3082
UN proper
shipping name
Environmentally Hazardous
Substance, Liquid, n.o.s. (Sulfuric
acid copper(2+) salt (1:1), hydrate (1:
5), solution)
Environmentally Hazardous
Substance, Liquid, n.o.s. (Copper (II)
sulfate, pentahydrate (1:1:5))
Transport
9
hazard class(es)
9
Packing group
III
III
Environmental
hazards
Yes.
Yes.
Additional
information
Non-bulk packages of this product are The environmentally hazardous
not regulated as hazardous materials substance mark is not required when
unless transported by inland waterway. transported in sizes of ≤5 L or ≤5 kg.
The marine pollutant mark is not
required when transported on inland
waterways in sizes of ≤5 L or ≤5 kg.
Special provisions
Date of issue/Date of revision
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
7/10
Pierce® BCA Reagents
Section 14. Transport information
8, 146, IB3, T4, TP1, TP29
Special precautions for user
: Transport within user’s premises: always transport in closed containers that are
upright and secure. Ensure that persons transporting the product know what to do in the
event of an accident or spillage.
Transport in bulk according
to Annex II of MARPOL
73/78 and the IBC Code
: Not available.
Section 15. Regulatory information
U.S. Federal regulations
: TSCA 8(a) CDR Exempt/Partial exemption: Not determined
United States inventory (TSCA 8b): All components are listed or exempted.
Clean Water Act (CWA) 307: Sulfuric acid copper(2+) salt (1:1), hydrate (1:5)
Clean Water Act (CWA) 311: Sulfuric acid copper(2+) salt (1:1), hydrate (1:5)
Clean Air Act Section 112
(b) Hazardous Air
Pollutants (HAPs)
: Not listed
Clean Air Act Section 602
Class I Substances
: Not listed
Clean Air Act Section 602
Class II Substances
: Not listed
DEA List I Chemicals
(Precursor Chemicals)
: Not listed
DEA List II Chemicals
(Essential Chemicals)
: Not listed
SARA 302/304
Composition/information on ingredients
No products were found.
SARA 304 RQ
: Not applicable.
SARA 311/312
Classification
: Not applicable.
Composition/information on ingredients
Name
%
Fire
Sudden
hazard release of
pressure
Reactive
Immediate
(acute)
health
hazard
Delayed
(chronic)
health
hazard
Sulfuric acid copper(2+) salt (1:1),
hydrate (1:5)
3-5
No.
No.
Yes.
No.
No.
SARA 313
Product name
CAS number
%
Form R - Reporting
requirements
Sulfuric acid copper(2+) salt (1:1), hydrate (1:5)
7758-99-8
3-5
Supplier notification
Sulfuric acid copper(2+) salt (1:1), hydrate (1:5)
7758-99-8
3-5
SARA 313 notifications must not be detached from the SDS and any copying and redistribution of the SDS shall include
copying and redistribution of the notice attached to copies of the SDS subsequently redistributed.
State regulations
Massachusetts
: The following components are listed: Sulfuric acid copper(2+) salt (1:1), hydrate (1:5)
New York
: None of the components are listed.
New Jersey
: The following components are listed: COPPER compounds
Date of issue/Date of revision
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
8/10
Pierce® BCA Reagents
Section 15. Regulatory information
Pennsylvania
: The following components are listed: COPPER COMPOUNDS
Canada inventory
: All components are listed or exempted.
International regulations
International lists
Chemical Weapons
Convention List Schedule I
Chemicals
: Australia inventory (AICS): All components are listed or exempted.
China inventory (IECSC): All components are listed or exempted.
Japan inventory: All components are listed or exempted.
Korea inventory: All components are listed or exempted.
Malaysia Inventory (EHS Register): Not determined.
New Zealand Inventory of Chemicals (NZIoC): All components are listed or exempted.
Philippines inventory (PICCS): All components are listed or exempted.
Taiwan inventory (CSNN): Not determined.
: Not listed
Chemical Weapons
Convention List Schedule
II Chemicals
: Not listed
Chemical Weapons
Convention List Schedule
III Chemicals
: Not listed
Section 16. Other information
Hazardous Material Information System (U.S.A.)
Health
1
Chronic Health Hazard
Flammability
0
Physical hazards
0
National Fire Protection Association (U.S.A.)
Health
1
Flammability
0
Instability/Reactivity
0
Special
The customer is responsible for determining the PPE code for this material.
Caution: HMIS® ratings are based on a 0-4 rating scale, with 0 representing minimal hazards or risks, and 4
representing significant hazards or risks Although HMIS® ratings are not required on SDSs under 29 CFR 1910.
1200, the preparer may choose to provide them. HMIS® ratings are to be used with a fully implemented HMIS®
program. HMIS® is a registered mark of the National Paint & Coatings Association (NPCA). HMIS® materials may
be purchased exclusively from J. J. Keller (800) 327-6868.
Reprinted with permission from NFPA 704-2001, Identification of the Hazards of Materials for Emergency
Response Copyright ©1997, National Fire Protection Association, Quincy, MA 02269. This reprinted material is
not the complete and official position of the National Fire Protection Association, on the referenced subject
which is represented only by the standard in its entirety.
Copyright ©2001, National Fire Protection Association, Quincy, MA 02269. This warning system is intended to be
interpreted and applied only by properly trained individuals to identify fire, health and reactivity hazards of
chemicals. The user is referred to certain limited number of chemicals with recommended classifications in NFPA
49 and NFPA 325, which would be used as a guideline only. Whether the chemicals are classified by NFPA or not,
anyone using the 704 systems to classify chemicals does so at their own risk.
History
Date of printing
: 12/11/2013.
Date of issue/Date of
revision
Date of previous issue
: 11/13/2013.
Version
: 1
Date of issue/Date of revision
: No previous validation.
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
9/10
Pierce® BCA Reagents
Section 16. Other information
Prepared by
Key to abbreviations
References
: MSDS (Regulatory Specialist)
: ATE = Acute Toxicity Estimate
BCF = Bioconcentration Factor
GHS = Globally Harmonized System of Classification and Labelling of Chemicals
IATA = International Air Transport Association
IBC = Intermediate Bulk Container
IMDG = International Maritime Dangerous Goods
LogPow = logarithm of the octanol/water partition coefficient
MARPOL 73/78 = International Convention for the Prevention of Pollution From Ships,
1973 as modified by the Protocol of 1978. ("Marpol" = marine pollution)
UN = United Nations
: Not available.
Indicates information that has changed from previously issued version.
Notice to reader
To the best of our knowledge, the information contained herein is accurate. However, neither the above-named
supplier, nor any of its subsidiaries, assumes any liability whatsoever for the accuracy or completeness of the
information contained herein.
Final determination of suitability of any material is the sole responsibility of the user. All materials may present
unknown hazards and should be used with caution. Although certain hazards are described herein, we cannot
guarantee that these are the only hazards that exist.
Date of issue/Date of revision
: 11/13/2013.
Date of previous issue
: No previous validation.
Version
:1
10/10