Sample Name: Name: Poly(styrene--b-ferrocenyldimethylsilane) Poly(styrene 1H NMR spectrum of the sample: sample: Sample #: P1001910019-SFES Structure: 1000 CH3 sec.bu CH2 CH b n Si CH3 Fe P10019-SFES 500 m Solvent methanol Composition: 0 8.0 ppm (f1) 7.0 6.0 5.0 5.82 Mw/Mn (PDI) 8.00 47.72 Mn ×103 S-b-FES 38.0-b-11.0 4.0 3.0 2.0 1.0 1.25 SEC profile of the block copolymer: copolymer: Synthesis Procedure: Poly(styrene-b- ferrocenyldimethylsilane)) is prepared by anionic living polymerization by successive addition of styrene followed by the addition of ferrocenyldimethylsilane monomer. P10019-SFES 0.3 0.2 Characterization: An aliquot of the polystyrene block was terminated before addition of hexamethyl cyclotrisiloxane and analyzed by size exclusion chromatography (SEC) to obtain the molecular weight and polydispersity index (PDI). The final block copolymer composition was calculated from 1H-NMR spectroscopy by comparing the peak area of the styrene protons at 6.3-7.2 ppm with the peak area of Si(CH3) at 0.2ppm. Solubility: Polymer is soluble in THF, CHCl3, Toluene and precipitate out from ether and hexanes. 0.1 0.0 15 20 25 Ve (ml) Polystyrene, Mn=38,000 Mw: 43,500 PI=1.15 Block Copolymer PS(38,000)-b-PFES(11,000), PI=1.25 Composition from FTIR/HNMR Thermal analysis of the samples was carried out on a TA Q100 differential scanning calorimeter at a heating rate of o 10 C/min.The midpoint of the slope change of the heat flow plot of the second heating scan was considered as the glass transition temperature (Tg). Melting and crystallization curve for the sample The melting temperature (Tm) was taken as the maximum of the endothermic peak where as the crystallization temperature (Tc) was considered as the minimum of the exothermic peak. Thermogram for FES block Thermal analysis results at a glance Tg: 106 For PS block Tm : - oC T c: - For FES block Tm: 139oC Tc: 104 oC Tg: 36oC Melting curve for PLA block: block: -0.1 -0.2 Heat Flow (W/g) Thermal analysis of the sample P10019 P1001910019SFES -0.3 -0.4 -0.38 -0.5 -0.40 Heat Flow (W/g) -0.42 138.64°C -0.6 120 32.89°C 125 130 Exo Up 135 140 145 150 Temperature (°C) -0.44 35.76°C(T) Crystallization curve: -0.46 37.27°C 0.29 -0.48 -0.50 28 30 32 34 Exo Up 36 38 40 42 44 0.28 46 Temperature (°C) Thermogram for PS block H e a t F lo w (W /g ) 104.10°C -0.48 0.27 -0.50 0.26 Heat Flow (W /g) -0.52 101.07°C -0.54 0.25 60 Exo Up 105.62°C(T) -0.56 -0.58 108.85°C -0.60 90 Exo Up 95 100 105 Temperature (°C) 110 115 120 80 100 Temperature (°C) 120 140
© Copyright 2024