• Introduction Variances Falk™ Triple Reduction Motoreducers & Speed Reducers

Falk™ Triple Reduction Motoreducers & Speed Reducers • Parts Guide
Types EBZ & CB • Sizes 1 thru 6
(Page 1 of 4)
Introduction
Variances
This parts guide is designed to assist in ordering replacements
parts for standard Type “EBZ” and “CB” triple reduction
Motoreducers and Speed Reducers, Sizes 1 thru 6. Consult
Factory for special or modified drives.
1. IDENTIFY DRIVE — Record Drive Model, Ratio and M.O.
Number from nameplate.
The primary variances for these drives are low speed helical
gear width (wide or narrow) and drives with backstops.
2. IDENTIFY INDIVIDUAL PARTS — Use
Ref. No. Part Description
exploded view on Pages 2 & 3
4A-1
Bearing
and Part Descriptions on Page 4 to
4A-2
Bearing
determine Ref. No. of required parts.
4A-3
Pinion & Shaft
4A-4
4A-4A
4A-5
Sample Nameplate
R
Gear
Spacer
Locknut
ENCLOSED
GEAR DRIVE
102-4EBZ3-16B4
7-935429 RATIO 16.69
SERVICE
INPUT
RATING HP 10.0
1750
RPM
SERVICE
OUTPUT
FACTOR
100
RPM
APPROX
CLASS 2
DATE 7/79
U.S. GALS
MODEL
M.O.
www.rexnord.com
1220915
NOTE: Replace seals, shims, and gaskets whenever
reassembling a drive. Shim-gaskets and fasteners are available
only in kits as shown below.
Gear Drive Identification
10
2
4
EBZ
HP
Class
Drive Size
Drive Type
No. Reductions
Variance
Model
Ratio Symbol or Exact Ratio
3
16
B
4
SHIMS & GASKETS — See Kit Ref 108
FASTENERS — See Kit Ref 116
Corrosion Protection & Storage
CAUTION: Follow guidelines below to avoid damage to parts.
1. For domestic or indoor storage, Factory provides standard
24 month protection as boxed or optional 24 month
protection for individual parts.
2. For export or outdoor storage, Factory provides optional 18
month protection.
CAUTION: This protection does not cover exposure to
elements such as standing water, etc.
Rexnord Industries, LLC, Gear Group
3001 W. Canal St., Zip 53208-4200, Milwaukee, WI USA Telephone: 414-342-3131
Fax: 414-937-4359 e-mail: [email protected] web: www.rexnord.com
333-334
October 1993 (.pdf revision)
Supersedes 12-82
Parts Guide • Falk™ Triple Reduction Motoreducers & Speed Reducers
(Page 2 of 4)
333-334
October 1993 (.pdf revision)
Supersedes 12-82
Sizes 1 thru 6 • Types EBZ & CB
Rexnord Industries, LLC, Gear Group
3001 W. Canal St., Zip 53208-4200, Milwaukee, WI USA Telephone: 414-342-3131
Fax: 414-937-4359 e-mail: [email protected] web: www.rexnord.com
Falk™ Triple Reduction Motoreducers & Speed Reducers • Parts Guide
Types EBZ & CB • Sizes 1 thru 6
Rexnord Industries, LLC, Gear Group
3001 W. Canal St., Zip 53208-4200, Milwaukee, WI USA Telephone: 414-342-3131
Fax: 414-937-4359 e-mail: [email protected] web: www.rexnord.com
(Page 3 of 4)
333-334
October 1993 (.pdf revision)
Supersedes 12-82
Parts Guide • Falk™ Triple Reduction Motoreducers & Speed Reducers
Sizes 1 thru 6 • Types EBZ & CB
(Page 4 of 4)
Ref. No.
4
4B
14/18
40
46
48
50
52
54
55
57
58
64
65
66
89
108
114
116
150
160
Description
Seal Cage, Replace with Ref 114
Seal
Head & Bearing Plate, Incls Ref 20 & 48 (Size 2-6)
Thrust Plate
Expansion Plug
Oil Wiper Kit
Seal Cage (Size 3-6 Model A, Replace with Ref 150)
End Cover
Seal (Size 3-6 Model A, Replace with Ref 150)
Shield (Size 2-6)
Oil Dam (Size 4-6), Integral with Ref 66
End Cover
Seal Cage (Size 5 Model A, Replace with Ref 160)
Seal (Size 5 Model A, Replace with Ref 160)
Bevel Housing, Incls Ref 55 & 57 for Size 2 & 3
Incls Ref 55 & 7AB-5 for Size 4, 5
Vent Plug
Shim-Gasket Kit
Incls Ref 5, 19, 24, 24A, 56, 62, 63, 5AB-8, 7AB-6 for Sizes 2-5
Incls Ref 5, 19, 24, 24A, 41, 56, 62, 63, 5AB-8, 7AB-6 for Size 6
Seal Cage Assembly, Incls Ref 4, 4B & 5
Fastener Kit, Incls Ref 6, 20, 23, 28, 51 & 60
Seal Cage Assembly, Replaces Ref 50 & 54 (Size 3-6 Model A)
Seal Cage Assembly, Replaces Ref 64, 65 & 7AB-15 (Size 5 Model A)
Ref. No.
1A2
1A2-1
1A2-2
1A2-3
1A2-4
1A2-5
1A2-8
1AC2
1AC2-1
1AC2-2
1AC2-3
1AC2-4
1AC2-5
1AC2-10
1AC2-11
1AS2
1AS2-2
1AS2-4
1AS2-5
1AS2-11
1AS2-19
1AS2-30
4A
4A-1
4A-2
4A-3
4A-4
4A-4A
4A-5
5AB
5AB-1
5AB-2
5AB-3
5AB-4
5AB-4A
5AB-8
5AB-9
October 1993 (.pdf revision)
Supersedes 12-82
Shaft Assembly, Incls Ref 1A2-1 thru 1A2-8
Bearing
Bearing
Shaft
Pinion
Spacer
Spacer (Sizes 2 & 3)
Shaft Assembly, Incls Ref 1AC2-1 thru 1AC2-11
Bearing
Bearing
Shaft
Pinion
Spacer
Bearing Cage
Locknut
Shaft Assembly, Incls Ref 1AS2-1 thru 1AS2-30
Bearing
Pinion
Spacer
Locknut
Sprag & Spring Kit
Backstop Sub-Assembly, Incls Ref 1AS2-19
Shaft Assembly, Incls Ref 4A-1 thru 4A-5
Bearing
Bearing
Pinion & Shaft
Gear
Spacer
Locknut
Shaft Assembly, Excludes Ref 5AB-9
Bearing
Bearing
Shaft
Gear
Spacer
Shim, Included with Ref 108 (Size 2-6)
Bevel Pinion, Replace with Ref 6AB
6AB
Bevel Pinion/Gear Set
7AB
Shaft Assembly, Excludes Ref 7AB-4
7AB-1
7AB-2
7AB-3
7AB-4
7AB-5
7AB-6
7AB-7
7AB-8
7AB-15
7AB-19
333-334
Description
Bearing
Bearing
Shaft
Gear, Replace with Ref 6AB
Baffle (Size 2-6)
Gasket, Included with Ref 108 (Size 2-6)
Keeper Plate
Seal Ring (Size 2-6)
Seal Sleeve, (Size 5 Model A, Replace with Ref 160)
Shield (Size 6)
Rexnord Industries, LLC, Gear Group
3001 W. Canal St., Zip 53208-4200, Milwaukee, WI USA Telephone: 414-342-3131
Fax: 414-937-4359 e-mail: [email protected] web: www.rexnord.com