1. No category

ANNEXURE TO TENDER NO.MRPU/IGCAR/CAP/6565
1. Description of the ITEM: Sample Mounting Stubs for FE-SEM:
2. Detailed SPECIFICATIONS and Quantity:
a) Aluminum grooved pin mount stubs: 200 numbers with holder box
b)
c)
d)
e)
f)
g)
Standard aluminum grooved pin mount stubs fits for Zeiss system and dimensions are listed in Fig 1.
Pelco 16111 or equivalent can be quoted
Low profile 45°/90° pin leg mountable stubs: 10 numbers with holder box
Low profile 45°/90° SEM mount, Pin legs fits in the ZEISS system sample holder. The stubs should be
made of aluminum, grooved edge and 9.5 mm pin leg with dimensions as listed in the Fig 2.
Pelco 16104 or equivalent can be quoted
Low profile 70° EBSD pin leg Mount stubs: 10 numbers with holder box
Low profile 70°EBSD SEM mount for ZEISS system. The stubs are made of aluminum, grooved edge
and 9.5 mm pin leg with dimensions listed in the Fig 3.
Pelco 16109 or equivalent can be quoted
45°/90° SEM pin leg mount stubs: 5 numbers with holder box
Pin leg 45°/90° SEM mounts fits for ZEISS system. The stubs made of aluminum, grove edged and 9.5
mm pin leg with dimensions listed in Fig 4.
Pelco 16355 or equivalent can be quoted
Dumont Anti-capillary and Anti capillary reverse self closing tweezers: 2 numbers
The tweezers made up of Inox SS, non magnetic with one bent tip for holding TEM grids. The
tweezers having tip width 0.06mm, thickness 0.02 mm and overall length 110 mm, as shown in Fig 5.
Pelco 510-5 NM or equivalent can be quoted
Pro reverse self closing Tweezers: 2 numbers
High precision reverse Curved, self closing and non magnetic tweezers specially intended for
microscopic assembly applications. The tweezers are having tip width0.16 mm, thickness 0.17mm, and
overall length 116 mm as shown in Fig 6.
Pelco 5372- NM or equivalent can be quoted
Scotch tape: 3 numbers
3MTM 665 double side coated adhesive transparent tape with no side liner and non-conductive. The
width and length are 6.35 mm and 23 m respectively.
Pelco 16076-1 or equivalent can be quoted
Fig 1
Fig 2
Fig 3
110
Fig 5
Fig 4
110
Fig 6
*The dimension given in the above figures is in mm.
The acceptance for these items will be given after checking the compatibility of the items for the
SEM (ZEISS Supra 55) applications.
Note:
After publishing the tender, if there is any change in specification, it will be published as
corrigendum in the MRPU portal.
MAKE OFFERED MAY BE CLEARLY INDICATED IN THE REMARKS COLUMN.