1. No category

NoBo.2042
No. 2042-CPR-547-14
cate CE for Factog Production Control (FPC)
Placed on market by:
1
STEBER d.o.o.
Dobja vas 186, 2390 Ra y ne na Korotkem
Factory: STEBERd.o.o.
Dobja vas 186, 2390 Ra yne na Korotkem
Product: Steel Structures up to EXC2 according to EN 1090-2.
Intended use: For structual use in all types of construction works. Corrosion protection, welding and assembling included.
CE marking method: MPCS - Method 1 ZA 3.2; PPCS - Method 3a ZA 3.4 acc. to 51ST EN 1090-1:2009+A1:2012
Confirmation: All provisions concerning the attestation of factory production control described in Annex ZA of the
following standard(s) were applied:
Factory Production Control (FPC)
In compliance with CPR-Construction Products
Regulation No.305/2011, the following has been
started:
SIST EN 1090-1:2009+Al:2012, Annex IA
Begin of validity: 18. 6. 2014
Period of validity: 18. 6. 2015
The construction product stated is submitted by
the manufacturer to the initial type-testing of the
product, a factory production control and to the
further testing of samples taken at the factory in
accordance with a prescribed test plan.
The Notified Body Institut za varilstvo d.o.o. No.
2042- has performed the initial inspection of the
factory and of the factory production and
performs the continuous surveillance, assessment and approval of the factory production
control.
Remarks: This certificate remains valid as long as the conditions laid down in the harmonised technical specification in
reference or the manufacturiring conditions in the factory or the FPC itself are not modified significantly.
The current validity of the certificate can be checked on: [email protected]
To this certificate belong the welding certificate(s): 2042-CPR-547-14
Place and issue date: Ljubljana, 18. 6. 2014
stli
'o---->-
7-
t'e
.3. - ---- -C(1)
0.
-•
VO t•Y
Dr.-Ing. Miro Uran
General Manager
4ISTITUT ZA VARILSTVO
Welding Institute
WELDING CERTIFICATE
Mark: 2042-CPR-W-547-14
We confirm herewith that the manufacturer meets the terms for
manufacturing component parts of metal constructions by welding
according to the standard SIST EN 1090-1:2009 + AC:2010, Annex ZA.
Manufacturer
Steber d.o.o., Dobja vas 186, 1290 Ra yne na
KorrAkem
Production plant
Steber d.o.o., Dobja vas 186, 1290 Ra y ne na
Koro§kem
Execution class
EXC 2
Standard EN ISO 3834
3
Material — welding method
(ISO/TR 15608 - ISO 4063)
1.1, 1.2 — 135
Products
Steel constructions
Welding coordinator
Bojan Markovia, EVVT
Date of issue: 18.6.2014
Date of expiry: 18.6.2015
Certification body: Institut za varilstvo d.o.o.
Ptujska 19, Ljubljana
(The Welding Institute)
Notification number: 2042
Dr.-Ing. Miro Uran, univ.dipl.in2.
General Manager
4.0
INSTITUT ZA VARILSTVO
Welding Institute
InC
CERTIFIKAT ZA VARJENJE
Oznaka: 2042-CPR-W-547-14
Potrjujemo, da proizvajalec izpolnjuje pogoje za izdelavo sestavnih delov
kovinskih konstrukcij z varjenjem po standardu SIST EN 1090-1:2009 +
AC:2012, Annex ZA.
Proizvajalec
Proizvodni obrat
Steber d.o.o., Dobja vas 186, 1290 Ra yne na
Koro§kem
Steber d.o.o., Dobja vas 186, 1290 Ra yne na
Koro§kem
lzvedbeni razred
EXC 2
Standard EN ISO 3834
3
Material - nadin varjenja
(ISO/TR 15608 - ISO 4063)
1.1, 1.2 — 135
lzdelki
Jeklene konstrukcije
Varilni koordinator
Bojan Markovio, EWT
Datum izdaje:
18.6.2014
Datum veljavnosti: 18.6.2015
Certifikacijski organ: Institut za varilstvo d.o.o.
Ptujska 19, Ljubljana
tevilka priglasitve: 2042
Dr.-Ing. Miro Uran,
Direktor
o0o•
1
co
ZA
INSTITUT ZA VARILSTVO
Welding Institute