Pregradne zavese tehnična dokumentacija Dividing curtains technical documentation Dimenzije / Dimensions / Maße L1 E F C B A H X-D D-200 L H = Višina zavese (do 12 m) / Height of the curtain (up to 12 m) / L = Dolžina zavese (do 35 m) / Length of the curtain (up to 35 m) / L1 = Dolžina osi za zaveso (do 35,5 m) / Length of the curtain –axle (up to 35.5 m) / A = Spodnji rob dvignjene zavese / Lower edge of the lifted curtain / B = Višina dvidnjene zavese (50 ali 75 cm) / Height of the lifted curtain (50 or 75 cm) / C = Potrebna razdalja do ovire (~ 50 cm) / Needed space to obstacle (~ 50 cm) / E = Razdalja med osnimi ležaji (1,5 - 3 m) / Axle bearings grid (1.5 - 3m) / F = Razdalja med dvižnimi vrvmi / Lifting bands grid / Obremenitve / Loads / G/2 G G G 2G G G G = 1000 - 1500 N q = 500 N/m Prikazane so obremenitve za zaveso z dvojno tkanino. Loads shown are for double dividing curtain. FIPRO d.o.o. Ι Dacarjeva 36, SI-4248 LESCE Ι +386 41 451-336 Ι [email protected] G G/2 Električna napeljava / Electricity / PPY 3 x 1,5 PPY 5 x 2,5 PPY 3 x 1,5 PPY 3 x 1,5 Z Z Z Ko Eo DZ = Elektro motor / Electro motor / Z = Varnostne zavore / Safety brakes / Ko = Kontrolna omarica (zagotavlja ELAN) / Control box (provided by ELAN) / Eo = Glavna elektro omarica / Main electro box / Montaža / Instalation / Montaža pod tram. Montaža med tramova. Montaža poleg trama. Instalation bellow the beam. Instalation between the beams. Instalation along the beam. FIPRO d.o.o. Ι Dacarjeva 36, SI-4248 LESCE Ι +386 41 451-336 Ι [email protected] Varnost / Safety / Motor: - 230/400V/1,1kW, izhodni navor 400Nm - toplotna zavora, zasilno ročno upravljanje, centralna montaža z elektro omarico na zidu - skladno z EN 12453 - varnostna zavora montirana na obeh straneh osi - kompaktna oblika, varnostni faktor IP65, skladno z EN 12604/12605 Dvižni trakovi: - posebni poliester - natržna obremenitev 1650 daN - širina 25 mm - razmak med dvižnimi trakovi: 1500 - 3000 mm Motor: - 230/400V/1,1kW, output torque 400Nm - wormgear brake, emergency manual operation provided, central installed, with electro locker provided on the wall - in compliance with EN 12453 - safety brakes mounted at axle edings on each side - compact design, safety factor IP65, in compliance with EN 12604/12605 Lifting band: - special polyester - breaking load 1650 daN - width 25 mm - lifting band grid: 1500 - 3000 mm Motor: - 230/400V/1,1kW, output torque 400Nm - wormgear brake, emergency manual operation provided, central installed, with electro locker provided on the wall - in compliance with EN 12453 - safety brakes mounted at axle edings on each side - compact design, safety factor IP65, in compliance with EN 12604/12605 Lifting band: - special polyester - breaking load 1650 daN - width 25 mm - lifting band grid: 1500 - 3000 mm FIPRO d.o.o. Ι Dacarjeva 36, SI-4248 LESCE Ι +386 41 451-336 Ι [email protected] Material / Material / Umetno usnje 1200: - teža 1200 g/m2 po standardu EN ISO 2286-2 - s PVC zaščito ali brez - natezna vrednost 1500N / 50 mm EN ISO 1421/V1 - pretržna vrednost 300N DIN 53356 - ognjeodpornost DIN 4102 B1, NFP 92507 M2, UV zaščiteno, mikrobiološko zaščiteno - sive ali bež barve Umetno usnje 890 - teža 890 g/m2 po standardu EN ISO 2286-2 - s PVC zaščito - natezna vrednost 1500N / 50 mm EN ISO 1421/V1 - pretrna vrednost 300N DIN 53356 - ognjeodpornost DIN 4102 B1, NFP 92507 M2, UV zaščiteno, mikrobiološko zaščiteno - sive ali bež barve, druge barve po naročilu * težje usnje pomeni boljšo zvočno dušenje Artificial leather 1200 - weight 1200 g/m2 acc. to EN ISO 2286-2 - PVC coated or NON-PVC - tensile strength 1500N / 50 mm EN ISO 1421/V1 - tear strength 300N DIN 53356 - flame retardant DIN 4102 B1, NFP 92507 M2, UV protected, microbiological protected - grey or beige colour Artificial leather 890 - weight 890 g/m2 acc. to EN ISO 2286-2 - PVC coated - tensile strength 1500N / 50 mm EN ISO 1421/V1 - tear strength 300N DIN 53356 - flame retardant, DIN 4102 B1, NFP 92507 M2, UV protected, microbiological protected - grey, beige or other colour on demand * heavier leather means better sound absorption FIPRO d.o.o. Ι Dacarjeva 36, SI-4248 LESCE Ι +386 41 451-336 Ι [email protected] FIPRO d.o.o. Dacarjeva 36, SI-4248 LESCE, Slovenia +386 41 451-336 [email protected]
© Copyright 2024