ASI | Information Series EaZm Xa^e Dimensional Letters and Logos ;gdci LZaY"dc HijY ($&+Ç l]^iZ igVchajXZci VXgna^X hiVcYVgY Choosing the Right Solution for Your Brand and Facility Dimensional letters can be integrated into custom interior signage, exterior signage, digital signage enclosures, and donor recognition walls. They project your brand identity in professional and substantive manner that intuitively communicates stability in he minds of your clients. To help educate marketplace, we have consolidated dimensional letters options into seven standardized series. These series are: EaZm Xa^e ;gdci LZaY"dc HijY &$'Ç l]^iZ igVchajXZci VXgna^X hiVcYVgY LF Series: Fabricated Letters LPS Series: Cut Metal Letters LPL Series: Metal Laminate Cut Letters LM Series: Molded Plastic Letters LPP Series: Precision Cut Acrylic Letters LC Series: Cast Metal Letters LTV Series: Cut Vinyl Lettering The most commonly recognized and used dimensional letter solution is the LF Series Fabricated Letters. This series can be fabricated using a variety of materials and manufacturing techniques to create visually striking effects for letter and logo forms. Ig^b"XVe & ;gdci &$-Ç VXgna^X #%*%Ç Vajb^cjb gZijgch #%+(Ç Vajb^cjb WVX`h >aajb^cVi^dc [gdb cZdc dg A:9Éh Eg^bVgn edlZg id aZiiZgh LF Series: Fabricated Letters and Logos Face-lit Channel Letters Illuminated from neon or LED’s. Option of wall or raceway mounting. Can have self contained or remote mount transformers. Aluminum construction can be pop riveted or welded. NOTE: The stroke width of a neon channel letter should never be less than 1.5” thick, or arcing may occur, which could cause a fire. &$)Ç YgV^c ]daZ 6ajb^cjb gZijgch ;gdci 6ajb^cjb [VXZ I]gZVYZY hijY l^i] heVXZg 8aZVg edanXVgWdcViZ Halo-lit Channel Letters Halo-lit channel letters Rated for interior and exterior use Materials: aluminum, brass, bronze, copper and stainless steel Finishes: brushed, polished, oxidized and painted, 140 standard paint colors, custom colors available Illumination options: face and halo with neon or LED Mounting: stud mounting in adhesive grouts for >aajb^cVi^dc [gdb cZdc dg A:9Éh 9gV^c ]daZ asisignage.com | 800.274.7732 flush mounting or mechanical attachment provided for stand-off requirements O"WgVX`Zi [dg bdjci^c\ aZiiZgh dkZg (,Ç ^c ]Z^\]i Material varies Front Dimensional Letters and Logos for Architectural Environments Routed and Cut Dimensional Letters and Logos 1.5” 10/24 threaded stud standard Cut from Metal, Acrylic, Laminates and Vinyl Material Front In addition to the larger fabricated metal letters and channel letters, letterforms and logos can 0.25” routed aluminum or stainless steel also be cut from a variety of substrates. The most commonly used substrates are aluminum and stainless steel, acrylic, metal and woodgrain laminates, and vinyl. The material thickness and mounting method varies by material. To help define each option, we’ve created four sections, or series, of cut letters. LPS Series: Cut Metal Letters VHB Tape or Silicon Adhesive Routed 0.25” aluminum (standard) with threaded studs welded or drilled and tapped for mounting. Nuts used as spacers to reach stand-off distance. Common material choices include Aluminum returnsFront aluminum, brass, bronze, chrome and copper. Finishes: brushed, polished and oxidized. Threaded stud with spacer Precision cut or routed acrylic or metal laminate Front LPP Series: Precision Cut Acrylic Letters Aluminum face Routed acrylic or Sintra®, 3MTM VHBTM adhesive transfer tape with VHB adhesive for flush mounting. For thicker material, threaded studs can be used for a “pin mounting” effect but it is Clear polycarbonate not a common fabrication technique. These letterforms are rated for interior and exterior use. Z-bracket for mounting letters over 37” in height LPL Series Metal Laminate Cut Letters Rated for interior use only. Common material choices include aluminum, brass, bronze, chrome and copper. Finishes: brushed, polished and oxidized. Mounting: VHB tape and silicone adhesive Drain hole Vinyl or frisket paint LTV Series: Cut Vinyl Lettering Frisket painted or opaque vinyl graphics, for a non-illuminate face. Translucent vinyl on acrylic or fiberglass for illuminated faces. EaZm Xa^e Letterforms and Logos in Sign Panels and Faces ;gdci Material varies Routed Letterforms Routed .090 aluminum face (standard) backed with white translucent acrylic. Vinyl overlays are Front LZaY"dc HijY ($&+Ç l]^iZ igVchajXZci VXgna^X hiVcYVgY used for alternate colors. VHB adhesive is used for mounting smaller sizes, and weld-on studs with clips is used to mount larger sizes. Push-Through Letterforms EaZm Xa^e Routed .090 aluminum face (standard) with routed white or clear acrylic pushed through the ;gdci panel face. The standard projection depth is 0.25”, but the depth is determined by the size LZaY"dc HijY the sign and the graphic designer’s intent. V inyl overlays are used for alternate colors. VHB &$'Ç l]^iZ 1.5” 10/24 igVchajXZci threadedVXgna^X stud hiVcYVgY standard adhesive is used for mounting smaller sizes, and weld-on studs with clips is used to mount larger sizes. Front Ig^b"XVe & 0.25” routed aluminum orVajb^cjb gZijgch #%*%Ç stainless steel #%+(Ç Vajb^cjb WVX`h More than 40 years of proven;gdcileadership and signage innovation >aajb^cVi^dc [gdb