Kr.
www.vigor-equipment.com K14/2-V-EN-No Valid until December 31, 2014 Pipesett V3734, EAN 4047728037341 6 23 cLMN Single parts see VIGOR catalogue 2014 from page 38 on X 2 Design i 12 x Ac 6 2x 2x 4x 1x 1x 1x LL LM LN F1 aE F F F 6 6 1 o size mm 4 4.5 5 5.5 6 7 8 9 10 11 12 13 PH 1 PH 2 PZ 1 PZ 2 T 15 T 20 T 25 T 30 100 25 150 Kr. 225 Alle priser eks. MVA. Ekstraktorsett store muttere/bolter V3741, EAN 4047728037419 3 7 •Special profile sockets for releasing defective nuts and bolt heads VIGOR No. Design i size mm EAN 4047728+ Kr. V3742 V3743 V3744 V3745 V3746 V3747 Extractor Socket with Spirale Profile 3 3 3 3 3 3 21 037426 037433 037440 037457 037464 037471 125 130 140 160 175 190 Extractor Socket with Spirale Profile Extractor Socket with Spirale Profile Extractor Socket with Spirale Profile Extractor Socket with Spirale Profile Extractor Socket with Spirale Profile 22 24 27 30 32 Ekstraktorsett innvendige skruer V3737, EAN 4047728037372 Kr. 798 15 •Extra short style •Hexagon drive size 13 mm •Slightly tapered spiral •Suitable for torn off screws and stud bolts •Collar guarantees locking effect and spreading limit •Special steel •In sturdy plastic box •Contents: Extractors 3.2 mm = 1⁄8" 4.8 mm = 3⁄16" 6.3 mm = 1⁄4" 10 mm = 3⁄8" 12.5 mm = 1⁄2" Extractors3 4 5 5.5 6 8 10 11 12 14 mm Kr. 475 Alle priser eks. MVA. 3 Gripe/sveisetang V3738, EAN 4047728037389 Gripe/sveisetang V3739, EAN 4047728037396 175 Sizes 11 – 19 mm mm 250 Sizes 16 – 27 mm Wire cutter Kr. 155 mm Wire cutter Kr. 185 Tang for både nagler og naglemuttere V3735, EAN 4047728037358 •Rivet nuts for rivets made of copper, brass, steel and stainless steel : M5 M6 M8 M10 •Blind rivets for rivets made of copper, brass, steel and stainless steel : 3.2 4.0 4.8 6.4 mm Rivet nut Blind rivet 2K System Kr. 795 4 Alle priser eks. MVA. Batteri & ladetester også for start/stopp systemer. Integrert skriver V3748, EAN 4047728037488 6/12 V VRLA, GEL, AGM, SLA starter batteries 12/24 V Starter system and charging system •Used for testing built-in batteries •New: suitable for testing start-stop batteries •With starter system and charging system test •LCD display: voltage, battery capacity and battery capacity available in temperature measurements •Operating range: 40 – 2000 A SAE 40 – 2000 A EN2 50 – 2500 A EN1 25 – 1300 A DIN 30 – 1500 A IEC Plug Suitable for batteries with automatic start-stop system Kr. 3495 Muttertrekker med enhåndsbetjening (høyre/venstre) V3653, EAN 4047728036535 Reserve papirruller for skriver 2 stk. V1923, EAN 4047728019231 Protective cover Kr. 78 Powerful twin hammer mechanism 3 3 Multiple power settings in forward and reverse with one-hand reversing switch (right / left) 1,890 Nm max. loosening torque Kr. 1895 rpm 6.3 bar 12.92 m/s² 8,500 96 dBA Coupler plug nominal size Air consumption l/min. 7.2 113 6 1,890 Nm Alle priser eks. MVA. Exhaust air is guided downwards through the handle Coupler plug included 1.95 5 Sett med åpne rørnøkler V3730, EAN 4047728037303 7 4 •For screw connections on brake, fuel, hydraulic and air-conditioning lines •Wrench head ends work like spring hinges •Worn, damaged or too small screw connections are firmly enclosed •Clamping mechanism depending on torque: The higher the torque the more powerful the clamping •Adapts to metric as well as inch sizes •7 for extra leverage 7 Size 14 Size 12/13 Size 11 Size 10 Kr. 995 Available in September Reparasjonsett for plast/kunstoff V3551, EAN 4047728035514 •For repair and reinforcement of plastic parts, as e.g. cracked light bars and housing parts •Suitable for repairing plastic components within a few minutes, the kit ensures dimensional stability and prepares the workpiece for subsequent treatments such as painting or filling •Electric capacity: 100 – 240 V -50/60Hz Max: up to 20 W •Contents: 100 clips type V / X 0.6 mm 100 clips type W / X 0.6 mm 100 clips type W / X 0.8 mm VIGOR No. Design size mm EAN 4047728+ Kr. V3703 V3704 V3705 V3706 Line Wrench 10 Line Wrench 11 Line Wrench 12/13 Line Wrench 14 037037 037044 037051 037068 295 295 295 295 5 6 www Contents: V3671 type V X 0.6 mm V3672 type W X 0.8 mm V3673 type W X 0.6 mm Also available: V3674 type F X 0.8 mm VIGOR No. V3671 V3672 V3673 V3674 V3675 V3676 V3677 Kr. 1348 6 Alle priser eks. MVA. V3675 type S X 0.8 mm X 100 x 100 x 100 x 100 x 100 x 100 x 100 x V3676 type U X 0.6 mm V3677 type U X 0.8 mm Design EAN 4047728+ Kr. clips type V / X 0.6 mm 036719 036726 036733 036740 036757 036764 036771 130* 130* 130* 196* 196* 196* 196* clips type W / X 0.8 mm clips type W / X 0.6 mm clips type F / X 0.8 mm clips type S / X 0.8 mm clips type U / X 0.6 mm clips type U / X 0.8 mm * Price per set Støtdemperverktøy V3863, EAN 4047728038638 3 •Suitable for installation and removal of shock absorbers with rebound spring •Special construction enables appropriate lifting of the piston rod without tilting •Clamping piece with V-formed plastic inserts enables fixation in final stop position without causing any damage •For: BMW, FIAT, FORD, MERCEDES-BENZ, NISSAN, PEUGEOT, TOYOTA •Contents: Special base component Sturdy threaded spindle M12 with special receptacle Universal clamping piece with V-formed plastic inserts. Kr. 1895 Løsgjenge verktøysett V3864, EAN 4047728038645 24 •For threads: M6 M8 M10 •For the repair of damaged or worn-out threads •Due to an one-piece and extremely thin-walled design the threaded repair inserts are heat and torsion resistant. •Contents: 3 x Twist drills made of HSS-E high-alloy steel with 8% cobalt 3 x HSS-G precision screw taps 5 x Threaded repair inserts M6 x 1.00 x 12 mm 5 x Threaded repair inserts M8 x 1.25 x 16 mm 5 x Threaded repair inserts M10 x 1.50 x 20 mm 3 x Assembly tools, sizes: M6 M8 M10 M6 M8 M10 Alle priser eks. MVA. Kr. 1095 7 V3898, EAN 4047728038980 Kr. 945 V3441, 445 EAN 4047728034418 mm Kr. 945 20 – 120 Nm 540 3 mm 40 – 200 Nm V3899, EAN 4047728038997 m m 610 Kr. 1225 3 60 – 320 Nm V3899 Available in September 3 Double scale: Nm and Ibf.ft. Torque Technology Made in Germany BILREKVISITA – DELER – KAROSSERIMATERIELL – VERKSTEDUTSTYR Postboks 142 – Industriveien 1 – 2020 Skedsmokorset – Telefon 63 89 33 00 – Telefax 63 89 33 60 – e-post: [email protected] – www.rodin.no Alle priser eks. MVA. VIGOR GmbH ∙ Am Langen Siepen 13-15 ∙ D-42857 Remscheid www.vigor-equipment.com ∙ [email protected] Products in this brochure available as long as stock lasts! All rights reserved regarding technical modifications. Figures may not always correspond to the original and are thus not binding! Errors and omissions excepted! Copyright 2014 by VIGOR GmbH •Release accuracy tolerance ± 4% of scale value (in direction of actuation) •Double scale: Nm and Ibf.ft. •Scale graduation: 1 Nm (V3441, V3898), 2 Nm (V3899) •Torque release: palpable and audible •Fine-tooth reversible ratchet •72 teeth, rotation angle 5° •Handle with suspension lug •With serial number and certificate •DIN EN ISO 6789:2003 (D), square drive according to DIN 3120 A, ISO 1174-1A • 1.10 kg (V3898), 1.45 kg (V3899), 1.26 kg (V3441) 3 K14/2-V-EN/No I. 08.2014 / 1. Di 14985-U09/Paf Momentnøkkel 20 – 120 Nm, 40 – 200 Nm, 60 – 320 Nm
© Copyright 2024