1. home and garden

katalog.book Seite 798 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Thickness measuring instruments
Continued next page
Crankshaft testing equipment
Design: graduation 0.01 mm
Application: to ascertain deflections on crankshafts.
Description of function: the device is used in between two centres arranged at opposite crank arms. On
turning the crankshaft by 180°, the pointer deflection points to a misaligned bearing. The dial gauge is kept
in the vertical position by a counterweight on the rear side, so that one can constantly read from above.
Delivery: complete with dial gauge in wooden case.
Range of application
Complete with a dial gauge and case
33590
mm
Ident. No.
60-300
300
Unit price
E
Ident. No.
O. R.
33591
Replacement dial gauge with a counter weight
60-500
500
O. R.
020
E
Unit price
Calibration
page 701
(O. R.)
Prod. Gr. 337
Measurement tools
Continued next page
Thickness measuring instruments
Application:
Used to measure the thickness of leather, cardboard, paper, felt, rubber, glass, foil, plywood, plastics, metal sheets etc. The curved parts of the thickness gauges
are made of aluminium and are guaranteed to be very handy to use, even when the curves are extended to great lengths. The gauge slide shape is adapted to
suit the materials being measured and can be selected in accordance with the drawings below.
Design:
•0.1 mm graduation; one revolution of the hand = 10 mm on the display range
•0.01 mm graduation; one revolution of the large hand = 1 mm on the display range
•0.01 mm digit increment in the version with an electronic dial gauge
No. 33185 is a pocket thickness gauge in a compact form
Note:
The devices from 200 mm bracket depth and scale division value of 0.1 mm are delivered with a set-up device, so that their stationary use is possible.
No. 33195
33206
No. 33197
No. 33199
No. 33185 110
No. 33185 135
Flat Ø 10 mm
Spherical
Ø1/8''
Ø 30
Ø
20
Ø
Probe shape a
Probe shape b
For rubber blankets, rubber sheets, felts, soft fabrics
30 mm measurment range,
400 mm bow depth,
with a mounting fixture
Bow depth
mm
0 - 10
0 - 10
0 - 10
0 - 30
0 - 30
0 - 30
mm
18
45
50
50
200
400
Ident. No.
110
135
010
050
070*
090*
* with lifting device
h Other thickness measurement devices available on request.
798
Probe shape e
For sheet metal, etc.
Measuring range 10 mm
bow depth 50 mm
Graduation/digit increment
Measuring range
10
Probe shape c
For soft leather, cardboard,
paper, foil
No. 33185
Pocket thickness gauge
Calibration
on request.
0.01 mm
0.1 mm
0.1 mm
0.1 mm
0.1 mm
0.01 mm
33185
33195
33196
33197
33199
33206
U. pr. E
O. R.
O. R.
–
–
–
–
U. pr. E
–
–
–
O. R.
O. R.
O. R.
U. pr. E
–
–
–
O. R.
–
(O. R.)
U. pr. E
–
–
–
(O. R.)
–
–
U. pr. E
–
–
–
O. R.
(O. R.)
O. R.
U. pr. E
–
–
O. R.
–
–
–
Prod. Gr. 331
Edition 5
katalog.book Seite 799 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Thickness measuring instruments
Continued next page
Electronic thickness measuring device
52
33211
mm
mm
mm
mm
mm
N
Ident. No.
12,5
0,01
10
50
0,02
0,5
011
Unit price
E
O. R.
Measuring range
Numerical increment
Ø of flat gauge slides
Bow depth
Error limit
Contact pressing force
h Designs with other gauge slide forms available on request.
Spare battery 3 V type CR 2032 see No. 56815 210 page 1587.
Connection cable for measurement transmission: see No. 39855 page 904.
Calibration
on request.
Measurement tools
0,01 mm
Functions:
•zero setting at any position (RESET)
•switch the counting direction
•mm/inch switching
•preset (measurement presetting)
Delivery: with battery 3 V lithium (type RS 2032), in a case
Prod. Gr. 331
Continued next page
Film thickness gauges
With lifting device:
Design:
The stability of the curved part combined with the insulation of the handle guarantee the accuracy of the
display on the precision measuring gauge. The important positions of the measuring mechanism are stonemounted. The glass and outer ring are a single piece, thereby achieving complete dust protection and enabling shadow-free reading right the way through to the outer edge of the scale.
Application: this measuring device is used solely for measuring the thickness of foils.
Delivery: in a case
Measuring range
Scale graduation value
Ø of the measuring faces/Ø of the dial gauge
Bow depth
One revolution of the large hand
Contact pressing force
With a dial gauge and case
33212
Unit price
h Version with electronic gauge, measuring range 3 mm, on request.
mm
mm
mm
mm
mm
approx. N
Ident. No.
E
Calibration
on request.
0-1
0,001
6,35/58
30
0,2
1,3
010
O. R.
0,001
6,35/58
30
0,1
1,5
020
O. R.
Prod. Gr. 331
Ident. No. 020
Edition 5
799
katalog.book Seite 800 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Quick callipers
Continued next page
Quick callipers for external measurement of grooves and thicknesses
Measurement tools
Application:
For direct measurement of thickness, wall thickness, and external slots at positions difficult to access
Type/advantage:
Mechanical devices:
•slight adjustment through rotating mount(ScaleØ 60mm)
•adjustable tolerance marks
•IP-protected systems (types of protection see table below)
Electronic devices:
•compact and ergonomic housing
•large and high-contrast LCD display (digit height 8.5 mm)
•combined digit and scale display
•IP-protected systems (types of protection see table below)
•practical functions:
– measured value grading (red/green display during tolerance measurements)
– mm/inch switching
– measuring mode ABSOLUT
•data output (data cable, optionally with either USB, Digimatic or U-Wave interface, available on request)
•with batteries (2x 1.5 V type AAA)
POCO:
•very easy-to-handle and cost-effective quick probe
•housing and probe arms made of special plastic
Delivery: with test certificate
Model D110 (Ident. No. 020)
Model C220 (Ident. No. 030)
Model C330 (Ident. No. 065)
Measuring contact 1
Model
Measuring range Scale division
mm
POCO 2K
D110
C220
D220
D220S
C330
D450
C450
Measuring contact 2
0-10
mm
0,1
0,005
0-20
0,01
0-30
0,02
0,05
0,02
0-50
Display
Measuring depths L
max.
mm
36
Mechanical
35
Electronic
Mechanical
85
Mechanical
Electronic
115
Mechanical
167
Measuring contact 6
Measuring contact
Measuring contact Protection class Measuring contacts
33241
length, moving 'Hb' length, stationary 'Hf'
(refer to sketch)
mm
mm
mm
image Ident. No. U. pr. E
5
5
–
HM ball Ø 2
6
010
O. R.
19,1
18,6
IP65
HM ball Ø 1.5 1
020
O. R.
030
O. R.
IP67
HM ball Ø 1.5 1
IP65
HM ball Ø 1.5 1
040
O. R.
24,6
24,6
IP65
Blade R 0.4
2
050
O. R.
30
30
IP67
HM ball Ø 3
1
065
O. R.
IP65
075
O. R.
30
30
HM ball Ø 3
1
IP67
085
O. R.
h Other measuring ranges and special versions with other/special curve forms or measuring contact forms available on request.
800
Prod. Gr. 332
Edition 5
katalog.book Seite 801 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Quick callipers
Continued next page
Quick callipers for internal measurements with 3-point contact
Application:
For direct measurement of drill holes, recesses and inside slots at positions difficult to access.
Type/advantages:
•quick measurement reading
•reliable measurements
•precise measurement results
•suitable for workshops
•IP67
•data interface (Digimatic, USB, U-Wave)
•mm/inch switching
Measuring contact 1
Ball 0.6 mm
Model
Measuring range
G107P3
G210P3
G215P3
G225P3
G240P3
G255P3
G270P3
G285P3
mm
7-14
10-20
15-30
25-45
40-60
55-75
70-90
85-105
Measuring contact 2
Ball 1 mm
Display
Electronic
Measurement tools
Model G107P3 (Ident. No. 400)
Measuring contact 3
Ball 1 mm
Measuring depths L max.
Slot depth A
Slot width B
mm
34
75
77
85
84
84
84
84
mm
2,2
3,5
5
7
8
8
8,5
9
mm
0,8
1,6
1,5
1,6
1,6
1,6
1,6
1,6
Model G225P3 (Ident. No. 430)
Degree of protection
IP67
Measuring contacts
(refer to sketch)
mm
image
HM ball Ø 0.6
1
HM ball Ø 1
2
HM ball Ø 1
2
HM ball Ø 1
3
HM ball Ø 1
3
HM ball Ø 1
3
HM ball Ø 1
3
HM ball Ø 1
3
33261
Ident. No.
400
410
420
430
440
450
460
470
U. pr. E
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
Prod. Gr. 332
Edition 5
801
katalog.book Seite 802 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Quick callipers
Continued next page
Quick callipers for tube wall measurements
Measurement tools
Application: for direct measuring wall thicknesses of pipes and hollow parts.
Type/advantages:
Mechanical devices:
•slight adjustment through rotating mount(ScaleØ 60mm)
•adjustable tolerance marks
•IP-protected systems (types of protection see table below)
Electronic devices:
•compact and ergonomic housing
•large and high-contrast LCD display (digit height 8.5 mm)
•combined digit and scale display
•IP-protected systems (types of protection see table below)
•practical functions:
– measured value grading (red/green display during tolerance measurements)
– mm/inch switching
– measuring mode ABSOLUT
•data output (data cable, optionally with either USB, Digimatic or U-Wave interface, available on request)
•with batteries (2x 1,5V type AAA)
POCO:
•very easy-to-handle and cost-effective quick probe
•housing and probe arms made of special plastic
Delivery: with test certificate
Measuring contact 3
Measuring contact 4
Model Measuring range Scale division
POCO 2R
mm
1-10
mm
0,1
D1R10
D1R10S
0-10
0,005
0-20
0,01
0-50
0,05
0,02
C2R20
D2R20
D4R50
C4R50
Measuring contact 5
Model C2R20 (Ident. No. 040)
Model D4R50 (Ident. No. 065)
Measuring contact 7
Measuring depths L Measuring contact Measuring contact Protection class
Measuring contacts
33243
max.
length,
length,
(refer to sketch)
moving 'Hb'
stationary 'Hr'
mm
mm
mm
mm
image Ident. No. U. pr. E
Mechanical
33
5
1
–
Carbide ball Ø 2 /
7
010
O. R.
cutter rad. 0.5
19,1
HM ball Ø 1.5
3
020
O. R.
Mechanical
35
0,9
IP65
18,8
Carbide ball Ø 1.5 / 4
030
(O. R.)
cutter rad. 0.4
Electronic
IP67
040
O. R.
85
24,6
2,5
HM ball Ø 1.5
5
Mechanical
IP65
050
O. R.
Mechanical
IP65
065
O. R.
169
30
4,6
HM ball Ø 3
5
Electronic
IP67
075
O. R.
Display
Prod. Gr. 332
802
Edition 5
katalog.book Seite 803 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Quick callipers
Continued next page
Quick callipers for internal measurements of bores, recesses and internal grooves
Application:
For direct measurement of drill holes, recesses and inside slots at positions difficult to access.
Type/advantages:
Mechanical devices:
•slight adjustment through rotating mount(ScaleØ 60mm)
•adjustable tolerance marks
•IP-protected systems (types of protection see table below)
Electronic devices:
•compact and ergonomic housing
•large and high-contrast LCD display (digit height 8.5 mm)
•combined digit and scale display
•IP-protected systems (types of protection see table below)
•practical functions:
– measured value grading (red/green display during tolerance measurements)
– mm/inch switching
– measuring mode ABSOLUT
•data output (data cable, optionally with either USB or Digimatic interface, available on request)
•with batteries (Model C: 2 x 1.5V Type AAA / B: 1 x 1.5V Type AA)
Delivery: with test certificate
Measurement tools
Model G102 (Ident. No. 010)
Model H210 (Ident. No. 060)
Measuring contact 1
Measuring contact 2
Measuring contact 3
Measuring contact 4
Measuring contact 5
Model G313 (Ident. No. 215)
Model Measuring range Scale division
mm
G102
H102
G105
H105
G210
H210
G220
H220
G230
H230
G240
H240
G250
H250
G260
H260
G270
H270
G280
H280
G313
G330
H415
G415
H440
G440
H470
H4100
mm
2,5-12,5
0,005
5-15
0,005
10-30
0,01
20-40
0,01
30-50
0,01
40-60
0,01
50-70
0,01
60-80
0,01
70-90
0,01
80-100
0,01
13-43
30-60
0,02
0,02
0,05
0,02
0,05
0,02
0,05
0,05
15-65
40-90
70-120
100-150
Display
Electronic
Mechanical
Electronic
Mechanical
Electronic
Mechanical
Electronic
Mechanical
Electronic
Mechanical
Electronic
Mechanical
Electronic
Mechanical
Electronic
Mechanical
Electronic
Mechanical
Electronic
Mechanical
Electronic
Electronic
Mechanical
Electronic
Mechanical
Electronic
Mechanical
Mechanical
Measuring depths L max. Slot depth A Slot width B Degree of protection
mm
mm
mm
35
0,7
0,4
35
2,3
0,8
85
5,2
1,2
85
7,0
1,2
85
7,0
1,2
85
8,3
1,2
85
8,3
1,2
85
8,3
1,2
85
8,3
1,2
85
8,3
1,2
127
127
5
6,5
2
2,5
188
5,5
2,2
192
8,3
2,5
192
192
8,3
8,3
2,5
2,5
IP67
IP65
IP67
IP65
IP67
IP65
IP67
IP65
IP67
IP65
IP67
IP65
IP67
IP65
IP67
IP65
IP67
IP65
IP67
IP65
IP67
IP67
IP65
IP67
IP65
IP67
IP65
IP65
h Other measuring ranges and special versions with special measuring probe or measuring contact forms available on request.
Edition 5
Measuring contacts
33261
(refer to sketch)
mm
image Ident. No. U. pr. E
010
O. R.
Blade R 0.1
1
020
O. R.
030
O. R.
HM ball Ø 0.6
3
040
O. R.
050
O. R.
HM ball Ø 1
3
060
O. R.
070
O. R.
HM ball Ø 1
4
080
O. R.
090
O. R.
HM ball Ø 1
4
100
O. R.
110
(O. R.)
HM ball Ø 1
5
120
O. R.
130
(O. R.)
HM ball Ø 1
5
140
O. R.
150
(O. R.)
HM ball Ø 1
5
160
O. R.
170
(O. R.)
HM ball Ø 1
5
180
O. R.
190
(O. R.)
HM ball Ø 1
5
200
O. R.
HM ball Ø 1.3
2
215
O. R.
HM ball Ø 2
5
225
O. R.
235
O. R.
HM ball Ø 1.5
2
245
O. R.
255
O. R.
HM ball Ø 2
5
265
O. R.
HM ball Ø 2
5
275
O. R.
HM ball Ø 2
5
285
O. R.
Prod. Gr. 332
803
katalog.book Seite 804 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Centring instruments
Continued next page
Quick calliper for internal measurements with exchangeable inserts
Application: for measuring recesses, relieves, pocket holes and slots.
Design:
•application range 10-150 mm
•0.01 mm graduation
•measuring range precision pointer 0.20 mm •choice between two and three point measurement
•adjusting device for the display
•free stroke, 10 mm, measuring force per arm 3.5 N
Delivery:
Set in a case consists of: 3 carbide probes - normal, fine short and fine long, 2 variable special probes
for measurement from Ø 6 mm. 1 large and 1 small curve for measurements on 3 contact points.
1 centring device each for measurements of Ø 15-30 mm and of Ø 30-150 mm. screwdriver for changing
the probes.
Calibration
on request.
Measurement tools
Number
Designation
33286 IRA 2-MD internal measuring instrument with carbide-tipped measuring jaws, set in a case
Ident. No. Set pr. E
010
(O. R.)
Prod. Gr. 362
Continued next page
Centring measuring instrument
Application: for the centre determination of holes, shafts, centring tips to the working spindle
Description of function:
The revolving probe forms one unit with the working spindle axis. The dial gauge is prevented at the rotation
by a stop bar arranged on the rear of the dial gauge. Through the built-in overload safety clutch, a considerable insensitivity against damage is obtained.
Design:
•integrated idle display when the probe is in motion (by steady)
•centring error with standard probe  0.01 mm
•ball-bearing
•with overload friction clutch
•holder: taper shank MK 1, cylindrical screw-on sleeves Ø 8, 10, 12 and 16 mm
Delivery:
Small dial gauge (special design), screw-on taper shank MK 1, 3 screw-on intermediate sleeves 10, 12 and
16 mm, pendulum probe for small holes, 1 angled probe insert 25Ømm with ball 3.6 mm, 1 angled probe
insert 48 mm with ball Ø 3.6 mm, 1 hexagonal wrench width a. f. 2, 1 counter-holder 160 mm, in case.
1,5-120
5-110
010
Application range for inside Ø
mm
Application range for outside Ø
mm
33375 centring measuring instrument with standard accessories Ident. No.
Angled spare probe
E
mm
mm
Ident. No.
Special accessories: Straight probe
E
O. R.
O. R.
mm 100
125
150
200
mm
6
6
6
6
mm 20-180 20-220 20-260 20-340
Ident. No. 100
125
150
200
Set price
Length
Ball Ø
33375
Unit price
Length
Ball Ø
For bores
33376
Unit price
O. R.
48
3,6
500
25
3,6
501
E (O. R.) (O. R.) (O. R.) (O. R.)
Prod. Gr. 333
804
Edition 5
katalog.book Seite 805 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Centring instruments
Continued next page
Design:
The CENTRICATOR dial gauge remains positioned in the direction of the user's view during the rotating measurement process. It is held in place by magnets (no
support rod required). This ensures effortless observation of the dial gauge and precise positioning of the working spindle. Centring units can be used horizontally
and vertically.
Application:
For precise centred positioning of the working spindle based on bore holes, shafts, plane faces, reference edges or recesses, as well as concentricity tests of
working spindles. Can be used on milling machines, lathes and boring machines and systems – in both conventional and CNC operation.
Advantage:
Any axis displacement between the clamping shank and the working spindle will have no effect on the result of the measurement, since the revolving probe and
the working spindle form a single unit.
No. 33400 model CO: The probe direction is set by a rotary switch. The probe with adjustable angle is applied to the test face when the switch is pressed. Then
the measurement is performed. With attachment for different clamping shanks (additional accessories required, see No. 33412).
No. 33405 model CO-S: As model CO, however with cylindrical clamping shank Ø 16 mm.
No. 33410 model C III: The probe direction is set automatically by the device. To facilitate easier handling and to extend the range of application, the measurement head can also be moved and clamped horizontally along a slide. The measuring force can be adjusted for centring tasks with probe extensions.
With attachment for different clamping stems (additional accessories required, see No. 33412).
Standard accessories: straight probe insert ball Ø 5 mm; curved probe insert ball Ø 5 mm (only for CO models);hexagon screwdriver width a. f. 3 mm
Delivery: with operating instructions and workshop calibration certificate.
Model CO-S
No. 33405
Model C III
No. 33410
Number
Model
Dial gauge graduation
Measuring span of dial gauge
Probe range for inside tests*
Probe range for outside tests*
Probe range for planning tests*
mm
mm
mm
mm
mm
Ident. No.
E
Unit price
Application example
33400
33405
33410
CO
0,01
2,5
Ø 6-125
Ø 0-125
Ø 120-160
010
(O. R.)
CO-S
0,01
2,5
Ø 6-125
Ø 0-125
Ø 120-160
010
O. R.
C III
0,01
2,5
Ø 6-220
Ø 0-150
Ø 90-280
010
O. R.
* Information applies to use with standard measuring probes.
h See edge finders No. 23921-23925 page 582.
Prod. Gr. 335
Continued next page
Shanks
for centring instruments CENTRICATOR
Shanks
Clamping thread
33412
Ident. No.
Unit price
E
Morse taper
DIN 228
DIN 228
MT 3
MT 4
M12
M 16
030
040
(O. R.)
(O. R.)
DIN 2080
SK 40
S 20 x 2
320
(O. R.)
* With ring groove.
** Shank design DIN 69871 delivery without pull studs (machine-dependent); see No. 23690. page 575.
h Clamping shank for HSK 63 A according to DIN 69893 A with carrier groove, available on request.
Edition 5
steep taper
DIN 2080
ST 40 M 16 DIN 2080*
M 16
310
(O. R.)
Cylindrical
Ømm
16*
–
500
(O. R.)
Ømm
20
–
510
O. R.
Prod. Gr. 335
805
Measurement tools
Centring instruments CENTRICATOR
katalog.book Seite 806 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Hole and comparative measuring devices
Continued next page
Accessories
for centring instruments CENTRICATOR
Setting ball
Edge finder
Ø 25 mm
(concentricity
tolerance 0.5 m)
for concentricity
testing
All models
All models
Designation
For instruments
Measurement tools
33413
Individual accessory Ident. No.
Unit price
E
33414
Set of accessories
Unit price
100
200
(O. R.)
–
(O. R.)
–
Extension
for C III
No. 33410,
33411
220
Straight probe Angled probe Straight probe
insert
insert
insert
ball Ø 1.6 mm Ball Ø 2.5 mm
ball Ø 5 mm
Angled probe
insert
Ball Ø 5 mm
Angled probe
insert
Ball Ø 5 mm
for C III
No. 33410,
33411
340
All models
All models
All models
All models
300
310
320
330
Ident. No.
–
–
O. R.
O. R.
O. R.
O. R.
O. R.
(O. R.)
Set of accessories (4-part) consisting of aforementioned individual accessories
for instruments No. 33410, 334111
010
E
–
–
(O. R.)
Prod. Gr. 335
Continued next page
Comparison measuring instruments
pictograms and their meaning
806
For measurements of
through holes
For measuring the
diameter of the core
for inside threads
For measurements of
blind holes
For measuring the
track diameter for
internal round threads
For measurements of
short break-outs
For measuring inner
splines
For checking the cylindricity
For measurements of
internal teeth
For checking the
roundness
For measurements of
recesses and pedestal
bearings
For measuring spherical holes
For measurements of
undercuts
Edition 5
katalog.book Seite 807 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Hole and comparative measuring devices
Continued next page
Fine measuring bore gauges with probe heads
Design:
•repeat precision < 1 m
•a holder for all measuring ranges
•all standard probe heads are hardened and hard-chrome plated
Application:
•for comparative measurements and for quick measuring of small and deep holes
•for holes of 0.47-41.10 mm
Delivery: holders with probe heads, driving needles in a wooden case, without setting ring gauges, without
a dial gauge.
No. 33450 Sets with hard chromium-plated probe heads, driving needles and a case, without setting ring
gauges, without a dial gauge
No. 33453 Sets like No. 33450, but with probe heads for borehole base measurements
No. 33455 setting ring inserts
Measurement tools
Calibration
on request.
Measurement of borehole diameters and detection
of possible form errors.
33450
Ident. No.
0,47-0,97
6
2
010
Set price
E
Ident. No.
(O. R.)
–
(O. R.)
–
(O. R.)
–
O. R.
082
O. R.
045
O. R.
055
(O. R.)
065
(O. R.)
075
–
(sapphiretipped gauges)
–
–
(O. R.)
–
(O. R.)
–
(O. R.)
–
(O. R.)
–
(O. R.)
–
6
010
–
(1-1.4 mm
sapphiretipped gauges)
5
020
9
030
21
080
12
040
11
050
10
060
6
070
(O. R.)
(O. R.)
(O. R.)
(O. R.)
O. R.
O. R.
(O. R.)
Range of application
Number of sensing heads
Number of motive needles (different construction dimensions)
33453
mm
E
Set price
Setting rings made of steel
33455
Per set
Unit
Ident. No.
Set price
E
0,95-1,55
5
1
025
1,50-3,95 1,50-9,80 3,70-9,80 9,40-20,60 20,40-30,60 28,90-41,10
9
21
12
11
10
6
2
3
1
1
1
1
030
080
040
050
065
075
hWe recommend the following display devices: dial gauges No. 33010 010 and 33044 010 page 779 or precision pointer No. 33160-33161 page 786 and electronic length measuring probes from No. 39655 page 892.
Devices with rotating centre piece for arms run, on request.
(O. R.)
Prod. Gr. 337
Continued next page
Individual and add-on parts
for internal precision measuring instruments
No. 33460 Standard holder 51 mm long
No. 33462 Bit stop for measuring to a precisely defines depth
No. 33463 Angled piece for measurements in confined and difficult to access spaces
No. 33467 Thin extensions of Ø 4 mm in conjunction with these probe heads for deep boreholes of up
to 1000 mm between Ø 4.5-9.5 mm. Extra thin special probe heads and extensions for a measuring range of 2.75-4.00 mm on request.
No. 33468 Standard extension Ø 8 mm for deep boreholes from Ø 8.2 mm. Other lengths on request.
No. 33467 thin extension
with thin feeler head
33460
33462
33463
33468
No. 33468 Standard extension
Ø 8 mm, 64 mm long
Ident. No.
010
Standard holder 51 mm long
Unit price
E
O. R.
Bit stop without a standard extension, stop discs Ø 25 mm
Unit price
E
(O. R.)
Angled piece
Unit price
E
(O. R.)
Standard extension Ø 8 mm, 64 mm long
Unit price
E
O. R.
h No. 33467 thin extensions with thin probe heads on request.
Devices with rotating centre piece for arms runs with twist and
profiled holes, on request.
No. 33460 Standard holder
51 mm long
No. 33462 depth stop with
standard extension No. 33468
Prod. Gr. 337
No. 33463 Angle piece
Edition 5
807
katalog.book Seite 808 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Hole and comparative measuring devices
Continued next page
Probe heads
individual with an M 6 x 0.75 screw-in thread
Range of application
Max. measuring depths
33464
Unit price
Range of application
Max. measuring depths
33464
Unit price
Range of application
Max. measuring depths
Measurement tools
33464
Unit price
Range of application
Max. measuring depths
33464
Unit price
Range of application
Max. measuring depths
33464
Unit price
Range of application
Max. measuring depths
33464
mm 0,47-0,53
mm
1,5
Ident. No.
005
0,52-0,58
1,8
010
0,57-0,67
2,0
015
0,65-0,77
2,5
020
0,75-0,87
2,8
025
0,85-0,97
3,0
030
0,95-1,15
11
035
1,07-1,35
11
040
1,17-1,35
11
045
1,27-1,45
11
050
E
(O. R.)
mm 1,37-1,55
mm
11
Ident. No.
055
(O. R.)
1,50-1,90
17
060
(O. R.)
1,80-2,20
17
065
(O. R.)
2,05-2,45
17
070
(O. R.)
2,30-2,70
22
075
(O. R.)
2,55-2,95
22
080
O. R.
2,80-3,20
22
085
(O. R.)
3,05-3,45
22
090
O. R.
3,30--3,70
22
095
(O. R.)
3,55-3,95
22
100
E
O. R.
mm 3,70-4,30
mm
40
Ident. No.
105
O. R.
4,20-4,80
40
110
O. R.
4,70-5,30
40
115
O. R.
5,20-5,80
40
120
O. R.
5,70-6,30
40
125
O. R.
6,20-6,80
40
130
O. R.
6,70-7,30
40
135
O. R.
7,20-7,80
40
140
O. R.
7,70-8,30
40
145
(O. R.)
8,20-8,80
50
150
E
O. R.
mm 8,70-9,30
mm
50
Ident. No.
155
O. R.
9,20-9,80
50
160
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
9,40-10,60 10,40-11,60 11,40-12,60 12,40-13,60 13,40-14,60 14,40-15,60 15,40-16,60 16,40-17,60
50
50
50
50
50
50
90
90
165
170
175
180
185
190
195
200
E
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
(O. R.)
O. R.
(O. R.)
mm 17,40-18,60 18,40-19,60 19,40-20,60 20,40-21,60 21,40-22,60 22,40-23,60 23,40-24,60 24,40-25,60 25,40-26,60 26,40-27,60
mm
90
90
90
90
90
90
90
90
90
90
Ident. No.
205
210
215
220
225
230
235
240
245
250
E
(O. R.)
(O. R.)
O. R.
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
mm 27,40-28,60 28,40-29,60 29,40-30,60 28,90-31,10 30,90-33,10 32,90-35,10 34,90-37,10 36,90-39,10 38,90-41,10
mm
90
90
90
100
100
100
100
100
100
Ident. No.
255
260
265
270
275
280
285
290
295
E
Unit price
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
h Probe heads for pocket holes and probe heads made of carbide on request.
Prod. Gr. 337
Continued next page
Driving needles (steel)
For probe heads, application range
33465
mm
Ident. No.
Unit price
E
0,47-0,58
010
0,57-0,97
020
0,95-1,55
030
1,50-2,45
040
2,30-3,95
050
3,70-9,80
060
9,40-30,60
070
(O. R.)
(O. R.)
O. R.
O. R.
O. R.
O. R.
O. R.
h Carbide driving needles on request.
28,90-41,10
090
O. R.
Prod. Gr. 337
Continued next page
Setting ring gauges (individual)
for internal precision measuring instruments
•nominal Ø 0.5-1.4 mm, sapphire tipped
•nominal Ø 1.75-40 mm, made of hardened gauge steel
0,55
004
0,6
006
0,7
007
0,8
008
0,9
009
1
010
1,1
011
1,2
012
1,3
013
1,4
014
1,75
017
2
020
2,25
022
2,5
025
E (O. R.)
mm 2,75
Ident. No. 027
(O. R.)
3
030
(O. R.)
3,25
032
(O. R.)
3,5
035
(O. R.)
3,75
037
(O. R.)
4
040
(O. R.)
4,5
045
(O. R.)
5
050
(O. R.)
5,5
055
(O. R.)
6
060
(O. R.)
6,5
065
(O. R.)
7
070
(O. R.)
7,5
075
(O. R.)
8
080
(O. R.)
8,5
085
E (O. R.)
mm
9
Ident. No. 090
(O. R.)
9,5
095
(O. R.)
10
100
(O. R.)
11
110
(O. R.)
12
120
O. R.
13
130
(O. R.)
14
140
O. R.
15
150
(O. R.)
16
160
O. R.
17
170
(O. R.)
18
180
(O. R.)
19
190
(O. R.)
20
200
O. R.
21
210
(O. R.)
22
220
(O. R.)
24
240
O. R.
25
250
(O. R.)
26
260
(O. R.)
27
270
(O. R.)
28
280
(O. R.)
29
290
(O. R.)
30
300
(O. R.)
32
320
(O. R.)
34
340
(O. R.)
36
360
(O. R.)
38
380
(O. R.)
40
400
(O. R.)
(O. R.)
33466
E (O. R.)
mm
23
Ident. No. 230
Unit price
E (O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
Nominal Ø
33466
Unit price
Nominal Ø
33466
Unit price
Nominal Ø
33466
Unit price
Nominal Ø
mm
Ident. No.
0,5
003
h Inch nominal size on request.
808
Prod. Gr. 337
Edition 5
katalog.book Seite 809 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Hole and comparative measuring devices
Continued next page
Quick measuring stands
Ø of the measuring table
Stepless stroke of the measuring table
Max. workpiece Ø/Max. workpiece height
Length x width x height of the foot
Total height of the measuring stand
Measuring stand
33475
mm
mm
mm
mm
mm
Ident. No.
58,75
0-40
100/90-100
160 x 110 x 60
250
010
Unit price
E
Ident. No.
O. R.
010
E
(O. R.)
33476
Clamping angled limit stop
Unit price
Prod. Gr. 337
Measurement tools
for internal precision measuring instruments
Design:
•hardened and ground measuring table is raised by a lever on the base
•fixing the table with a clamping screw on the left side of the base
•clamping angled limit stop for quick centring of workpieces, available as accessory.
Application: quick and safe testing of holes
Delivery: quick measuring stands without dial gauge, floating holder, probe head and driving needle
Delivery without 1 Dial gauge,
2 Floating holder and
3 Probe head with driving needle
Continued next page
Universal measuring stands
Design:
•hardened measuring table, burnished, fine polished and with T-slots, interchangeable
•swivelling cantilever arm on the column
•measuring stroke adjustment through star-drive
Application: suitable for measuring deep holes up to 125 mm depth
Delivery: universal measuring stand (without precision pointer, holder, probe head, clamping piece and
driving needle).
Accessories:
Floating holder:
•for oscillating in all horizontal levels
•for measuring with high repeat precision
•floating range infinitely variable from 0-1.5 mm (up to 3 mm without regulation)
Clamping piece:
•is clamped on floating holder shaft
•for clamping the floating holder in the table drilling machines, measuring devices etc.
Stepless measuring stroke
Place table stand
Max. workpiece Ø/Max. workpiece height
Weight
With an angled stop
33480
mm
mm
mm
Kg
Ident. No.
0-130
100 x 100
170/280
15
010
Unit price
Floating holder
E
Ident. No.
(O. R.)
010
Clamping piece
E
Ident. No.
O. R.
020
E
(O. R.)
33485
Unit price
33485
Unit price
Measuring stand
Clamping piece
Prod. Gr. 337
Floating holder
Continued next page
Expansion probe OSIMESS
For quick manual measurements in a Ø-Bereich range of 1.0 to 40 mm. Modular system with a device
holder that can be quickly adapted to the required application range with exchangeable expansion probes
and measuring needles. The measuring path is transmitted by a high-precision carbide-tipped wedge
needle. The three basic designs of the expansion probes are chromium-plated, alternatively carbide-tipped
or designed for blind holes.
•economical measuring device for small diameters
•various accessories
•customer-specific special solutions possible
Edition 5
809
katalog.book Seite 810 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Hole and comparative measuring devices
Continued next page
Internal measuring devices for thread measurements
Properties:
•from thread size M8
•also for metric precision, trapezoid, buttress, round and other special threads
•exchangeable gauge slides, from thread diameter 20 mm
•large measuring depths possible
•thread setting ring required for setting internal measuring devices
Thread M8-M10 with internal measuring devices of the OSG series based on OSIMESS
Thread size M10-M60 with internal measuring devices of the ONG series based on ON/ONM
Thread size M60-M200 with internal measuring devices of the SG series based on SN
OSG series based on OSIMESS
SG series based on SN
Measurement tools
OSNG series based on ON
Continued next page
OSM Measuring stand
for OSIMESS Bore gauges
Application: for the comfortable and exactly repeatable series controls of bores.
With a bracket to hold the OSIMESS instrument holder.
If you press the hand lever, the bracket is lowered to the workpiece and the probe head is inserted into the
borehole being measured. The depth stops facilitate measurements at a reproducible measuring depth.
A floating workpiece rest or a floating holder are available on request for aligning the probe.
Cutting speed infinitely variable
Table Ø
Maximum working stroke
Maximum workpiece height
Length x width x height
OSM 5 stand
33515
mm
mm
mm
mm
mm
Ident. No.
0-250
120
90
200
230 x 130 x 400
050
E
Unit price
(O. R.)
Prod. Gr. 339
OSM 5 measuring table
Comes without a precision pointer
Continued next page
DIATEST Internal gauges
Application:
These measuring devices are used to measure bore diameters using the 2-point comparison measuring
procedure.
Easy to handle:
The a internal precision measuring device is auto-centred by spring bearing centring plates in the
hole. Shuttling the device around in the hole makes it possible to precisely determine the repeatable point
of reversion (measurement result). Simply replacing the micrometer bolts and spacers makes it possible to
refit the instrument quickly to different diameters.
Determination of shape deviations:
Turning and/or moving the device in the hole makes it possible to collect information about deviations from
roundness or cylindricity.
Technical data:
•repeat limit 2 m
•fixed micrometer bolts and moving probe bolts made of hardened steel
Delivery: in wooden case (without precision pointer)
Range of application
Measuring depth(from middle of the probe bolt to
bottom edge of the handle)
33518
mm
mm
18-35
176
35-60
178
50-150
178
Ident. No.
018
035
050
Set price
Range of application
E
mm
O. R.
O. R.
Measuring depth(from middle of the probe bolt to
bottom edge of the handle)
Large set
33518
mm
O. R.
18-150
(18-50/50-150)
176/178
Set price
*
Ident. No.
400*
E
O. R.
The large set consists of just 2 basic instruments. The measuring range is thoroughly covered by extensions (length 16 and 50 mm) to the measuring range.
810
Prod. Gr. 303
Edition 5
katalog.book Seite 811 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Hole and comparative measuring devices
Continued next page
Internal precision measuring instruments, SUBITO
series SU
Measurement tools
Application:
The SUBITO SU can be used to measure the diameters of bore holes precisely using the 2-point measuring
procedure. Ease of handling and the highest measuring precisions are features that set the SUBITO apart.
Advantages:
The precision of an internal comparative measuring device is clearly indicated by a high level of repeatability. For SUBITO SU, that figure is within 0.5-1.5 m, depending on the size of the device. The deviation
in linearity along the entire measurement path of the moving bolt is less than 2-3 m, depending on the
size of the device.The movable micrometer bolt is carbide-tipped as a standard feature.The special
SUBITO INVAR pipe (special nickel alloy) guarantees the least possible thermal expansion caused by hand
heat or high ambient temperature.
Easy to handle:
The SUBITO SU is auto-centred by spring bearing centring plates in the hole. Shuttling the device around
in the hole makes it possible to determine precisely and with repeatability the reversal point (measurement
result). Simply replacing the micrometer bolts and discs makes it possible to refit the SUBITO SU to different dimensions quickly with no complication.
Determination of shape deviations:
Turning and/or moving the device in the hole makes it possible to collect information about deviations from
roundness or cylindricity.
Delivery: without precision pointer with calibration certificate, in wooden case
No. 33520 with fixed bolts made of hardened steel
No. 33521 with fixed, carbide-tipped bolts
Determine the point of reversion
Fixed steel bolts Fixed carbide bolts
Fixed micrometer bolts
Range of application
Measuring depth from the
middle of the probe bolt
to the bottom edge of the
handle
mm
4,5-6
mm
80
6-8
8-12
100
100
12-20
110
18-35
110
35-60
140
50-100
180
18-100 comprises of 3
compl. instruments with
measuring ranges of 18-35,
35-60 and 50-100 mm, in a
wooden case
100-160
110-180
230
7
50-160 comprises of 2
compl. instruments with
measuring ranges of 50100, 100-60 and 50-160
mm, in a wooden case
160-290
180-230
18
Measuring discs
Sizes
Thickness
33520
33521
Number
mm
Number
9
4,5/4,6/4,8/5/5,2/5,4/
–
5,6/5,8/6,0
7
6/6,4/6,8/7/7,2/7,6/8,0
–
–
9
8-12,
increasing in steps of 0.5
mm
9
12-20,
1
increasing in steps of 1 mm
9
18-34
2
increasing in steps of 2 mm
6
35-59
2
increasing in steps of 5 mm
11
50-100
3
increasing in steps of 5 mm
7
27
See application ranges of
18-35, 35-60 and
50-100
mm
–
Ident. No.
010
U. pr. E
–
U. pr. E
O. R.
–
–
020
030
–
–
O. R.
O. R.
0,5
040
–
O. R.
0,5/1
050
O. R.
O. R.
1/2
060
O. R.
O. R.
1/2/3
070
O. R.
O. R.
Same as the individual
instruments
080
(O. R.)
O. R.
4
1/2/3/6
090
O. R.
O. R.
7
Same as the individual
instruments
100
O. R.
O. R.
100-160
increasing in steps of 10 mm
See application ranges
of 50-100 and 100-160
4
1/2/3/6
160-220 mm, increasing in
110
O. R.
increments of 10 mm, 1x 70
mm extension
400
7
280-340 increasing by
4
1/2/3/6
120
(O. R.)
280-510
10 mm; extensions: 1x 70
and 1x 100 mm
h Large time saving by using electronic dial gauges with a measurement memory, e. g. see No. 33172 100.
Application range 400-800 mm on request.
SUBITO SU internal gauges for larger (SMT) or smaller (SK) measuring depths, in angled versions (SW), for inch dimensions, also ruby-tipped micrometer bolts
available on request.
Small dial gauges with an extended shaft No. 33002, 33004 or 33010 are recommended for SUBITO devices in application ranges 4.5-20 mm.
All dial gauges with external Ø 58 mm or greater can be used for all other sizes.
Use with precision pointers is optimal (see No. 33160 010 page 786).
The greater precision of SUBITO devices also allows for measurement with electronic length measurement probes (see from No. 39655 page 892).
Edition 5
230
7
O. R.
O. R.
Prod. Gr. 338
811
katalog.book Seite 812 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Hole and comparative measuring devices
Continued next page
Measuring depth extensions
for SUBITO bore gauges
To insert in the dial gauge holder; fits the SUBITO from application ranges of 35-60 mm, with pipe diameter 12 mm
33523
mm
Ident. No.
250
025
500
050
750
075
1000
100
Unit price
E
O. R.
O. R.
(O. R.)
O. R.
Length
h Measuring depth extensions with pipe diameter 18 mm on request
Prod. Gr. 338
Continued next page
Measuring range extensions
for SUBITO bore gauges
To enlarge the application ranges.
Length
For SUBITO instruments of application ranges
For extending the application ranges to
Measurement tools
33527
mm
mm
mm
Ident. No.
Unit price
E
50
50-100
50-150
010
70
100-160 / 160-290
100-230 / 160-360
020
O. R.
O. R.
Prod. Gr. 338
Continued next page
Bolts
for SUBITO bore gauges No. 33520-33521
No. 33528 strong steel bolts
No. 33529 Strong carbide-tipped bolts
Measuring bolts 4.5-6 to 18-35 with thread.
Steel
SUBITO
application
range
mm
4,5-6
6-8
8-12
12-20
Ø to be
measured
mm
4,5
4,6
4,8
5,0
5,2
5,4
5,6
5,8
6,0
6,0
6,4
6,8
7,0
7,2
7,6
8,0
8,0
8,5
9,0
9,5
10
10,5
11
11,5
12
12
13
14
15
16
Carbide
tipped
33528 33529
Ident. No. U. pr. E
005
–
010
–
015
–
020
–
025
–
030
–
035
–
040
–
045
–
050
–
055
–
060
–
065
–
070
–
075
–
080
–
085
–
090
–
095
–
100
–
105
–
110
–
115
–
120
–
125
–
130
–
135
–
140
–
145
–
150
–
D
U. pr. E
(O. R.)
(O. R.)
(O. R.)
O. R.
O. R.
O. R.
(O. R.)
(O. R.)
O. R.
O. R.
(O. R.)
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
Steel
SUBITO
application
range
mm
12-20
18-35
35-60
old
version
D = 5 mm
35-60
new
version
D = 6 mm
50-100
33528 33529
Ø to be
measured
mm
17
18
19
20
18
20
22
24
26
28
30
32
34
35
39
43
47
51
55
59
35
39
44
49
54
59
50
55
60
65
Ident. No.
155
160
165
170
175
180
185
190
195
200
205
210
215
220
225
230
235
240
245
250
600
605
610
615
620
625
255
260
265
270
h SUBITO application range 18-100 see application ranges 18-35, 35-60, 50-100 mm.
Extension 70 mm see No. 33527 020.
SUBITO application range 50-160 see application ranges 50-100, 100-160 mm.
Extension 100 mm on request.
812
Carbide
tipped
U. pr. E
–
–
–
–
O. R.
O. R.
O. R.
(O. R.)
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
O. R.
(O. R.)
O. R.
(O. R.)
(O. R.)
(O. R.)
U. pr. E
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
(O. R.)
(O. R.)
O. R.
(O. R.)
O. R.
O. R.
(O. R.)
(O. R.)
(O. R.)
O. R.
O. R.
O. R.
O. R.
Steel
SUBITO
application
range
mm
50-100
100-160
160-290
280-510
33528 33529
Ø to be
measured
mm
70
75
80
85
90
95
100
100
110
120
130
140
150
160
160
170
180
190
200
210
220
280
290
300
310
320
330
340
Carbide
tipped
Ident. No.
275
280
285
290
295
300
305
310
315
320
325
330
335
340
345
350
355
360
365
370
375
410
415
420
425
430
435
440
U. pr. E
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
(O. R.)
O. R.
O. R.
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
U. pr. E
O. R.
O. R.
(O. R.)
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
Prod. Gr. 338
Edition 5
katalog.book Seite 813 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Hole and comparative measuring devices
Continued next page
Measuring discs
for SUBITO bore gauges No. 33520-33521
D
SUBITO application range
Thickness
Hole Ø d
Measuring discs
33534
E O. R.
Unit price
1
2
mm 12-20
mm 0,5
mm
4
Ident. No. 005
18-35
0,5
1
4
4
010
015
35-60 1
1
2
5
5
020
025
35-602 / 50-100
1
2
3
6
6
6
030
035
040
1
8
045
100-290
2
3
8
8
050
055
6
8
060
1
12
065
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
O. R.
280-800
2
3
12
12
070
075
6
12
080
(O. R.) (O. R.) (O. R.)
Application range 35-60 mm for old Subito devices with Ø D = 5 mm
Application range 35-60 mm for new Subito devices with Ø D = 6 mm
Prod. Gr. 338
Continued next page
Measurement tools
Spare parts
for SUBITO internal precision measuring instruments No. 33520-33521 (not VARIO SV)
The diagrams may differ for the individual device sizes.
No. 33551 complete holder without fixed micrometer bolts and wooden box
No. 33550 complete lower part comprises:
5: measuring device with diversion body, 4: segment, 2+3: centring plate, 1: nipple with micrometer bolts, 6: ejection nut
No. 33549 004-008 complete upper part consisting of:
;: pipe, <: connecting bar, 8: spring, :: handle, 7: clamping screw and =: dial gauge holder
No. 33549 012-500 complete upper part consisting of:
;: pipe, <: connecting bar, 8: spring, :: handle, 7: clamping screw, without dial gauge holder
No. 33528 >: fixed bolts made of steel page 812
No. 33529 >: fixed bolts made of hardened steel page 812
**
Range of application
33550 Complete bottom part
Unit price
33551 Complete holder
Unit price
33530 1 Nipple with feeler pin
Set price
33532 2 Steel centring plate
Unit price
33533 3 Centring plate coated
Unit price
33535 4 Segment
Unit price
33538 5 Measuring device with a diversion body
Unit price
33539 6 Union nut
Unit price
33540 7 Clamping screw
Unit price
33541 8 Spring for a centring plate
Unit price
33542 9 Spring for a connecting rod
Unit price
33544 Bolt-type micrometer key
Unit price
33547 < Connecting rod
Unit price
33548 = Dial gauge holder
Unit price
mm
Ident. No.
E
Ident. No.
E
Ident. No.
E
Ident. No.
E
Ident. No.
E
Ident. No.
E
Ident. No.
E
Ident. No.
E
Ident. No.
E
Ident. No.
E
Ident. No.
E
Ident. No.
E
Ident. No.
E
Ident. No.
E
4,5-6
004
(O. R.)
004
(O. R.)
004
O. R.
004
(O. R.)
–
–
004
(O. R.)
004
(O. R.)
–
–
004
O. R.
004
O. R.
004
(O. R.)
–
–
6-8
8-12
006
008
(O. R.) (O. R.)
006
008
(O. R.) (O. R.)
006
008
O. R.
O. R.
006
008
(O. R.) (O. R.)
006
008
(O. R.) (O. R.)
006
008
(O. R.) O. R.
006
008
(O. R.) (O. R.)
–
–
–
–
004
(O. R.)
006
008
O. R.
O. R.
004
O. R.
006
008
O. R.
O. R.
006
O. R.
–
–
–
–
18-35 35-601 35-602 50-100 100-160 160-290 280-510 400-800
018
035
039
050
100
160
280
500
(O. R.) (O. R.) (O. R.) (O. R.) (O. R.)
(O. R.)
(O. R.)
(O. R.)
018
–
039
050
100
160
280
500
O. R.
–
O. R.
O. R.
O. R.
O. R.
(O. R.)
(O. R.)
018
035
050
100
160
280
–
O. R.
O. R.
O. R.
O. R.
O. R.
(O. R.)
–
018
035
039
050
100
160
280
500
O. R. (O. R.) (O. R.) (O. R.) (O. R.)
(O. R.)
(O. R.)
(O. R.)
018
035
039
050
100
160
280
–
(O. R.) (O. R.) (O. R.) (O. R.) (O. R.)
(O. R.)
(O. R.)
–
018
035
050
100
280
O. R.
O. R.
O. R.
O. R.
(O. R.)
018
035
039
050
100
160
280
–
(O. R.) (O. R.) (O. R.) (O. R.) (O. R.)
(O. R.)
(O. R.)
–
–
035
039
050
100
280
–
O. R.
O. R.
O. R.
O. R.
(O. R.)
012
O. R.
012
018
035
050
100
160
280
500
O. R.
O. R.
O. R.
O. R.
O. R.
(O. R.)
(O. R.)
(O. R.)
012
035
050
100
280
O. R.
(O. R.)
(O. R.)
O. R.
(O. R.)
012
018
–
–
–
–
–
–
–
O. R.
O. R.
–
–
–
–
–
–
–
012
035
050
100
280
500
O. R.
O. R.
O. R.
O. R.
(O. R.)
(O. R.)
012
035
050
100
280
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
12-20
012
O. R.
012
O. R.
012
O. R.
012
(O. R.)
012
(O. R.)
012
O. R.
012
O. R.
–
–
** Fixed steel bolt-type micrometers (No. 33528) or carbide (No. 33529) see page 812.
1
Application range for 35-60 mm for old SUBITO devices, can be recognised from the Ø 10 mm pipe (part 11).
2
Application range for 35-60 mm for new SUBITO devices, can be recognised from the Ø 12 mm pipe (part 11).
Edition 5
Prod. Gr. 338
813
katalog.book Seite 814 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Hole and comparative measuring devices
Continued next page
SUBITO VARIO for extended measuring ranges
series SV/SVS
Based on the SUBITO internal precision measuring instrument No. 33520-33521, a modular system has
been developed which covers larger measuring ranges through the use of replaceable measuring
heads.
Repeat precision 0.0005 to 0.0015 mm, depending on the size of the instruments. Exchangeable bottom
parts, clear point of reversion, large measuring depth for small boreholes.
All the devices can be used together with dial gauges, precision pointers No. 33160 and electronic length
probes with a stem Ø of 8 h 6.
No. 33555 with fixed steel bolts, without precision pointer
No. 33556 with carbide-tipped bolts, without precision pointer
Delivery: in wooden case
Calibration
page 701
Measurement tools
No. 33555 040
Type
Range of application
Number of measuring heads
Measuring depth from the middle of the probe bolt to the bottom
edge of the handle
Number of fixed micrometer bolts
Dimensions of the fixed micrometer bolts
Number of measuring discs
Thickness of the measuring discs
Application range extension
Special equipment
33555
SV
6-18
2
100
mm
mm
18-160
2
140
SVS
18-160
2
Depending on the bottom part
160-430
1
200
17
20
20
7
6/6,5/7/7,5/8/8,5/ 18/20/22/24/26/28/ 18/20/22/24/26/28/ 160/170/180/190/
200/210/220
30/32/34/
9/9,5/10/11/12/13/ 30/32/34/50/55/50/
65/70/75/80/85/ 50/55/60/65/70/75/80/
14/15/16/17/18
85/90/95/100
90/95/100
2
5
5
4
mm
0,25/0,5
0,5/1,0/1,0/2,0/3,0
0,5/1,0/1,0/2,0/3,0
1/2/3/6
mm
–
16/55
16/55
3 x 70
–
–
Accessories for borehole base
–
measurements
Ident. No.
–
035
040
050
33556
E
Ident. No.
–
010
(O. R.)
035
(O. R.)
045
(O. R.)
055
Set price
E
O. R.
(O. R.)
(O. R.)
(O. R.)
Set price
h Dial gauges and precision pointers see No. 33001-33170 page 779.
ESU setting unit see No. 33 580-33 587 page 817.
Prod. Gr. 338
Continued next page
SUBITO internal fine measuring devices for blind holes
series SS/SSV
Application: for measuring blind holes, centring shoulders, etc.
Design:
•SSV for larger measuring range based on Subito SS
•carbide-tipped Vernier calliper and mobile micrometer bolts
•high measuring safety, repeat limit 0.001 mm
•measurement close to the ground
•setting via ring or ESU setting unit 33580 .../33582...
Type
Range of application
Number of measuring heads
Measuring depth t
Distance from the drill base h*
Number of Vernier callipers
Ranges of the individual Vernier callipers
33560
Unit price
With a wooden case, without a dial
mm 20-50
1
mm
80
mm 1,5
3
mm 20-30
30-40
40-50
Ident. No.
020
E
O. R.
Calibration
page 701
SS
SSV
50-110 110-300 300-600 20-140
1
1
1
2
60
90
90
60
1,5
2
2
1,5
2
4
6
6
20-30
50-80 110-150 300-350
30-40
80-110 150-200 350-400
40-50
200-250 400-450
50-80
250-300 450-500
500-550 80-110
550-600 110-140
050
110
300
140
O. R.
* For measurements extremely close to the base of a bore hole dimension h = 1 mm.
h Special design for larger diameters and measuring depths available on request.
Ruby measuring contacts available on request.
To measure holes below 20 mm, we recommend:
DIATEST internal precision measuring instruments No. 33450-33468 page 807.
Prices on request.
814
O. R.
(O. R.)
(O. R.)
Prod. Gr. 338
Edition 5
katalog.book Seite 815 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Hole and comparative measuring devices
Continued next page
The SUBITO plug gauges OD are robust and easy to use reference measuring devices which were designed
for the series control of bore holes. Thereby, the following requirements are met:
Marking
•easy to handle
•robust and reliable
•minimum measuring time
•matched to the relevant hole Ø, with tolerance
•maximum measuring safety
Technical data
•application range: possible from
•carbide measuring contacts and measuring needles
Ø 2 up to 800 mm
(wear-resistant)
•repeat limit 1 m
•standard connecting thread of the plug gauges
•version for blind holes
M 11 x 0.75 (adaptation with other systems
•version for through holes
e. g. M 10 x 1 or M 6 x 0.75 on request)
Special designs
•multiple measuring axes
•stationary
•ruby, ceramic or coated measuring contacts •automatic
•very deep bore holes
•true to gauge size
•slots and recesses
•easy interchangeable measuring contacts
•with integrated inductive probe
•plug gauges > 130 mm can be manufactured as runner•profile sections
cross sleeves or as solid plugs up to a Ø 250 mm,
•Taper
> Ø 250 mm only as as runner-cross sleeves
Accessories
•holder in various lengths
•Floating holder
•holder especially for use of electronic length measuring probes
•angled piece
•depth limit stop
•stand
•measuring depth extensions
mm 2,5-6
mm 0,15
mm 1,5
mm
6
mm
1
mm
10
m
1
fe
Measuring sleeveØ D
Measuring path
Front dimension h standard A
Front dimension h standard B*
front dimension h for blind holes
Height H of measuring sleeve
Repetition precision
Linearity error
6,1-20
0,2
2,5
10
1
15
1
20,1-40
40,1-60
60,1-130
0,2
0,2
0,2
3,5
3,5
4
10
10
10
1,2
1,2
1,2
20
28
33
1
1
1
< 1 % measuring path
Measurement tools
Plug gauges OD for series control
Plug gauge OD with holder
and precision pointer
130,1-300
0,2
7
18
6
55
2
* Prices on request.
No. 33562 Plug gauges OD with front dimension h: standard A
Application range Ø
33562
Unit price
Application range Ø
33562
Unit price
Application range Ø
33562
mm
Ident. No.
2,5-6
003*
6,1- 12
005*
E
mm
Ident. No.
(O. R.)
60,1 - 80
560*
(O. R.)
80,1 - 100
580*
20,1 - 30
520*
30,1 - 40
530*
40,1 - 60
540*
(O. R.)
(O. R.)
(O. R.)
(O. R.)
100,1 - 110 110,1 - 120 120,1 - 130 130,1 - 140
600*
610*
620*
630*
E
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
mm 140,1 - 150 150,1 - 160 160,1 - 170 170,1 - 180 180,1 - 190 190,1 - 200
Ident. No.
640*
650*
660*
670*
680*
690*
E
Unit price
12,1 - 20
010*
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
No. 33562: Plug gauges > 130 mm,
manufactured as runner-cross sleeves
Prod. Gr. 334
Continued next page
Plug gauges OD with front dimension h for blind holes
Tips of order: When ordering, it is necessary to specify the nominal Ø, the borehole length and the fit or tool tolerance.
mm
Ident. No.
2,5 - 6
006
6,1- 12
012
12,1- 20
020
20,1- 30
030
30,1- 40
040
40,1- 60
060
60,1- 80
080
80,1-100
100
100,1-110
110
33566
E
mm
Ident. No.
(O. R.)
110,1-120
120
(O. R.)
120,1-130
130
(O. R.)
130,1-140
140
(O. R.)
140,1-150
150
(O. R.)
150,1-160
160
(O. R.)
160,1-170
170
(O. R.)
170,1-180
180
(O. R.)
180,1-190
190
(O. R.)
190,1-200
200
Unit price
E
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
Application range Ø
33566
Unit price
Application range Ø
*
Orders must state the nominal Ø, bore length and fit or tool tolerance.
Surcharge for OD measuring sleeves < 20 mm and tolerance < 10 m.
h Measuring contacts in special design, ruby fitted or chromium plates: for scratch-sensitive workpiece surfaces (e. g. dry aluminium or non-ferrous metals) special
measuring contacts can be manufactured.
Additional information, advice and quotations available on request.
Edition 5
(O. R.)
Prod. Gr. 334
815
katalog.book Seite 816 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Hole and comparative measuring devices
Continued next page
Accessories for SUBITO plug gauge OD
device holder to take up plug gauges OD
Ident. No. 010-031 Standard device holder
Ident. No. 050 Special device holder with fine adjustment for holding electronic measuring probes
Ident. No. 060 Special device holder with reset mechanism for blind hole plug gauges and for the use for
scratch-sensitive bore holes.
33561
mm
mm
Ident. No.
50
12
010
105
12
020
145*
18
025
235
12
030
235*
18
031
110
12
050
Unit price
E
O. R.
O. R.
(O. R.)
(O. R.)
(O. R.)
(O. R.)
Length
Rod Ø
* For plug gauges OD from Ø 60 mm.
h Wooden case fitting for OD plug gauge with device holder available on request.
70
12
060
(O. R.)
Prod. Gr. 334
Continued next page
Accessories for SUBITO plug gauge OD
Measurement tools
measuring depth extension, can be used from Ø 12 mm onwards
Length
Rod Ø
33563
mm
mm
Ident. No.
Unit price
E
100
250
500
12
015
18
110
12
020
18
120
12
030
18
130
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
1000
18
140
(O. R.)
Prod. Gr. 334
Continued next page
Over and above!
internal measuring instruments in special designs
Describe your measuring problem; the variety of already realized special solutions – ranging from slightly modified standard measuring devices to
individual special forms – certainly includes a solution for you.
Examples of various OD plug gauges in special designs
Examples of several barrel gauges OD
with measuring bit stop
t Technical Hotline +49 (0)711 9813-366
Continued next page
SUBITO internal fine measuring devices for internal toothing
series KT
Application:
For measuring the pitch circle diameter via the test measurement M (DIN 5480 and others) on internal
toothing with an odd or even number of teeth, with straight or slanted tooth forms, such as involute
toothing.
Design:
The assembly is similar to the SUBITO standard device No. 33521 with stepped measuring discs for holding
the interchangeable carbide measuring ball discs. The available ball diameters are 1-15 mm, in increments
of 0.001 mm. Application range: Ø 8-250 mm. Also available for larger diameters on request.
Delivery:
Device holder with moving probe bolts, exchangeable gauge slides, measuring discs, a wooden case,
without spherical inserts. Probe bolts and gauge slides with an inside thread for screwing in the spherical
inserts.
Type/Size
Range of application
Device holder with a feeler pin
Number of exchangeable gauge slides
mm
Number and thickness of the Vernier callipers
In a wooden box,
Ident. No.
33572
without a dial gauge
Unit price
E
KT 12
8-12
1
5
KT 22
12-22
1
11
008
012
022
055
(O. R.)
(O. R.)
(O. R.)
(O. R.)
KT 55
KT 250
22-55
55-250
1
1
9
10
1 extension 16 mm 3 extensions of 50 mm
each
1x0.5 mm 1x0.5 mm 1 x 0.5 and 1 x 1.0 mm 1 x 1.2 and 1 x 3 mm
h Accessory: 1 set of ball inserts with carbide balls at your required of Ø 1-15 mm; not included in
the scope of delivery, must be ordered separately (specify type/size).
Reducer unit to enable the KT 55 ball inserts to be used in KT 250. KT 510 on request.
816
Calibration
page 701
Prod. Gr. 338
Edition 5
katalog.book Seite 817 Samstag, 8. März 2014 3:56 15
Manual measuring devices with dial indicator
Hole and comparative measuring devices
Continued next page
Special internal precision measuring instruments for slots and recesses
series ON/ONM
Measurement tools
B
E
Application:
For measuring slots and groove diameters, for slot depths of up to 5 mm (10 mm is optional).
Application range Ø 6-200 mm.
No. 33577 008-022 ON expansion probe with a carbide-tipped wedge needle
No. 33577 055-140 ONM expansion probe with a carbide-tipped wedge needle and corresponding Vernier callipers
Insertion Ø and groove Ø required when placing orders.
No. 33576 010 holder for ON and ONM devices (without dial gauge)
Calibration
page 701
Type
Range of application
Lead in Ø
Min. insertion width
Max. measuring depths
Max. expansion distance
33577 Expansion probe
Unit price
33576
Holder (without dial gauge)
mm
mm
mm
mm
mm
Ident. No.
E
Ident. No.
ON 8
6-8
6
0,8
60
2
008
ON 12
8-12
8
1,2
60
4
012
ON 14
10-14
10
1,2
60
4
014
ON 18
12-18
12
1,2
60
6
018
ON 22
16-22
16
1,2
60
6
022
(O. R.)
(O. R.)
(O. R.)
(O. R.)
(O. R.)
ONM 40-200/10
d+10*
40-200
2,5
140
10
140
ONM 40-200/20
d+20*
40-200
2,5
140
20
141
(O. R.)
(O. R.)
(O. R.)
010
E
Unit price
ONM 20-55
d+10*
20-45
2,2
140
10
055
(O. R.)
* For each Vernier calliper.
h Individual Vernier callipers, with graduation of 10 mm, available on request.
Prod. Gr. 338
Continued next page
ESU adjusting devices
for SUBITO internal precision measuring instruments SU, SK, SW, SMT, SP
SUBITO instruments are set to the requested set point measurements quickly and precisely with
parallel gauge blocks.
Setting cheeks made of hardened steel, fixed and loose carbide measuring arms and lapped to gauge block
quality.
To make adjustments, the two measuring arms are set against the gauge block or gauge block combination.
This gauge block unit is inserted into the slot of the ESU traverse. A lever clamps the gauge block unit with
reproducible measuring force.
Advantage: Horizontal and vertical setting options.
Delivery: complete with accessories, without SUBITO and precision pointer.
33580
Number
For SUBITO internal precision measuring instruments, application range
With setting jaws and wooden case
Unit price
33582
mm 4,5-160 18-160 18-290 160-510 20-300*
Ident. No. 010
E O. R.
015
(O. R.)
* For SS devices.
h On request:
- Setting jaws and individual parts for adjusting devices for borehole base.
- SCA and pedestal bearings as well as devices for larger application areas are available.
- Single parts for an individual combination or as replacement parts.
020
O. R.
010
O. R.
020
(O. R.)
Prod. Gr. 338
No. 33580
Illustration shows a vertical insert
(comes without SUBITO and precision pointer)
Edition 5
817