™
HCI DVD Player
OPERATIONS MANUAL
Model # HCI- DVD2
REVISION 1.1
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
CONTENTS
PACKAGE CONTENTS
SAFETY PRECAUTIONS
MOUNTING INSTRUCTION
SUPPORTED FORMATS
2
3-5
6, 7
7
PRODUCT INTRODUCTION
8-12
FRONT AND REAR PANEL VIEW
IR REMOTES
PILLOW SPEAKER CONTROL
TV SETUP FOR PILLOW SPEAKER CONTROL
OPERATION
8
9, 10
11
11
12
ADVANCED SETUP
ACCESSING SETUP MENUS
SOFTWARE VERSION
13
13
MENUS
GENERAL MENU
TV DISPLAY
ANGLE MARK
OSD LANGUAGE
CAPTIONS
SCREEN SAVER
HDCD
LAST MEMORY
MP3 LYRICS
13, 14
13
13
13
13
13
13
13
13
AUDIO MENU
SPEAKER SETUP
DOWNMIX
POST DRC
SPDIF SETUP
SPDIF OUTPUT
LPCM OUT
14, 15
14, 15
14
15
15
15
15
DOLBY MENU
DUAL MONO
DYNAMIC RANGE
15
15
15
VIDEO MENU
COMPONENT
RESOLUTION
QUALITY
SHARPNESS
BRIGHTNESS
CONTRAST
GAMMA
HUE
SATURATION
LUMA DELAY
HDMI SETUP
HDMI
AUDIO SOURCE
16
16
16
16
16
16
16
16
16
16
16
16
16
16
PREFERENCE MENU
IR BAND
PCB
AUDIO
SUBTITLE
DISC MENU
PARENTAL CONTROL
PASSWORD
DEFAULT
17, 18
17
17
17
17
17
18
18
18
CLEANING
SPECIFICATIONS
WARRANTY
18
18
19
HealthCare Information, LLC
1
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
PACKAGE CONTENTS
After opening, carefully check the package contents:
DVD player
1
Operation Manual
1
HDMI Cable
1
POWER Cord
1
3`RCA Cable Set
1
Foot Pads
4
Mounting Screws M4*8 Philips Pan Head
4
Black Washer
4
RJ11Data Cable
1
IR Remote
1
HealthCare Information, LLC
2
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
SAFETY PRECAUTIONS
WARNING
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture and this apparatus shall not be exposed to dripping
or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus.
Do not use this apparatus near water. For example: avoid placing it near a bathtub, washbowl, kitchen sink, or laundry tub, in a wet basement,
or near a swimming pool, etc.
This apparatus shall be connected to a mains socket outlet with a protective earthing connection.
The mains plug of this apparatus must remain readily operable.
Advertisement:
Pour réduire le risque du feu ou de décharge électrique, n’exposez pas cet appareil à la pluie ou à l’humidité. L’appareil ne sera pas exposé à
l’égoutture ou l’éclaboussement et aucun objet remplis de liquides, tels que des vases, ne seront placés sur l’appareil.
NOTE TO CABLE TV INSTALLER
This reminder is provided to call the cable TV installer’s attention to Article 820-40 of the National Electric Code (U.S.A.). This code provides
guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building as
close to the point of the cable entry as practical.
REGULATORY INFORMATION
This equipment generates uses and can radiate radio frequency energy, and if not installed in accordance with this instruction manual, may
cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of the follow measures:
1. Increase the separation between the equipment and receiver.
2. Consult the dealer or an experienced radio/TV technician for help.
CAUTION
Do not attempt to modify this product in any way without written authorization from HealthCare Information, LLC. Unauthorized
modification will void the warranty of the product.
This unit employs a laser system. To ensure the proper use of the unit, read this manual carefully and keep it for future reference.
This DVD video player is a class 1 laser product. Adjustments or performance procedures other than those specified herein may result in
hazardous radiation exposure. The laser beam used in this DVD video player is harmful to the eyes; refer servicing to qualified personnel only.
COMPLIANCE
The party responsible for this product’s compliance is:
HealthCare Information, LLC, 113 Commerce Blvd., Loveland, OH 45140, USA. Phone 513-271-8100
HealthCare Information, LLC
3
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
IMPORTANT SAFETY INSTRUCTIONS
1.
Read these instructions.
2.
Keep these instructions.
3.
Heed all warnings.
4.
Follow all instructions.
5.
Do not use this apparatus near water.
6.
Clean only with soft dry cloth. For heavy contamination a soft cloth dampened with a mild soap solution may be used.
7.
Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8.
Do not install near any heat source such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that
produce heat.
9.
Do not defeat the safety purpose of the polarized or grounding type plug. A polarized plug has two blades with one
wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or third prong
is provided for your safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of
the obsolete outlet.
10.
Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point
where they exit from the apparatus.
11.
Only use attachments/accessories specified by the manufacturer.
12.
Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a
cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
13.
The mains plug is used as the disconnect device, the disconnect device shall remain readily operable. Always remember
to remove the plug from the mains socket before disconnecting the power lead from the unit.
14.
Unplug this apparatus during lightning storms or when unused for long periods of time.
15.
Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any
way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the
apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
-----------------------------------------------------------------------------------------------------------IMPORTANT SAFEGUARDS FOR YOU AND YOUR NEW PRODUCT
YOUR NEW PRODUCT HAS BEEN MANUFACTURED AND TESTED WITH YOUR SAFETY IN MIND. HOWEVER,
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. TO AVOID DEFEATING
THE SAFEGUARDS THAT HAVE BEEN BUILT INTO YOUR NEW PRODUCT, PLEASE READ AND OBSERVE THE
FOLLOWING SAFETY POINTS WHEN INSTALLING AND USING YOUR NEW PRODUCT, AND SAVE THEM FOR
FUTURE REFERENCE. OBSERVING THE SIMPLE PRECAUTIONS DISCUSSED IN THE MANUAL CAN HELP YOU
GET MANY YEARS OF ENJOYMENT AND SAFE OPERATION THAT ARE BUILT INTO YOUR NEW PRODUCT.
HealthCare Information, LLC
4
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
IMPORTANT SAFETY INSTRUCTIONS
Do not use a
defective power
cable.
Switch off the player,
If the cable plug wires
are not completely in
power socket.
If it is very cold, please
turn on the power for
1min. then turn off the
power for 1min. then
you can turn on and
use the unit.
Place DVD player on
a stable surface.
Do not touch
the power cable
with wet hands.
Insert the plug
in to the socket
firmly.
Unplug the apparatus
if the device is wet.
Disconnect player
from power outlet if
unit is damage.
Do not expose the
unit to the direct
sunlight or extreme
heat.
Do not place this unit
near moisture.
Do not place the unit
under any heavy
object or in
unventilated place.
Do not use discs with
scratches and
deformations.
HealthCare Information, LLC
5
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
MOUNTING INSTRUCTIONS (OPTIONAL)
Installing HCI DVD player flat against the wall or on a flat surface.
1.
Place DVD mounting bracket bottom of HCI DVD player as picture shown above.
2.
Use the 4 M4x8mm screws and 4 black washers (included with DVD player) to fasten the mount to DVD player.
3.
Place DVD player fixed with mounting bracket flat against the wall.
4.
Using 4pcs 1/4`` lag bolts fasten the DVD player onto wall or flat surface.
Mounts are available to mount the DVD player directly to an HCI RoomMate series TV. Mounts are available for left, right and
bottom mounting. Contact your dealer for more information and part numbers. For these mounts, follow the directions that are
included with the mount to mount the DVD player to the TV.
5.
Connect the RJ-11 cable to the RJ-11 jack on the rear panel of the TV to the RJ-11 jack on the rear panel of the
DVD player. (Optional for pillow speaker control only)
6.
For HCI RoomMate TV’s connect the HDMI output of the DVD player to the HDMI input of the TV.
7.
Plug the power cord in to the power cord jack on the rear panel of the DVD player and the other end in to a
standard wall outlet.
HealthCare Information, LLC
6
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
8.
To connect to non-HCI sets.
A.
Locate the DVD player close to the set. The connecting cables must be able to reach the input jacks of the
set.
B.
Connect the DVD player to the TV using one of the following outputs on the back of the DVD player.
The TV must have a corresponding input.
A.
B.
C.
D.
E.
HDMI
COMPONENT
S-VIDEO
COMPOSITE (A/V)
COAX (RF-CH4)
Best picture and sound quality
Excellent picture and sound quality
Good picture and sound quality
Common picture and sound quality
Common picture and sound quality
If using the coax connector, connect the incoming coax to the RF IN coax connector and the RF OUT coax
connector to the TVs RF IN connector. (tuner) To watch a DVD, tune the TV to channel four. NOTE:
When the DVD player is on, the TV will not receive normal TV channels. To return to normal TV
viewing, turn the DVD player off.
SUPPORTED FORMATS
CD PLAYER
VCD, SVCD, DVD, MP3, MP4, JPEG, HDCD, CDDA, WMA, CD-G, CD-RW, DVD-R, DVD+R, DVD-RW, DVD +RW,
HDVD and Kodak Picture CD.
USB FLASH DRIVE AND SD/MS/MMC MEMORY CARD
WMA, AVI, MP3, DIVX, MPEG 4, DIVX3.11, DIVX4.X and DIVX5.X.
HealthCare Information, LLC
7
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
PRODUCT INTRODUCTION
FRONT PANEL
REAR PANEL
HealthCare Information, LLC
8
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
IR REMOTE (DVD ONLY)
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
POWER
MENU DIRECTION
DVD/USB
SLOW
REVERSE
PLAY/ PAUSE
PREVIOUS
ZOOM
SUBTITLE
REPEAT
ROOT MENU
FORWARD
NEXT
STOP
IR REMOTE (HCI TV AND DVD)
1. POWER
POWER ON/OFF
2. MUTE
TURNS SOUND ON AND OFF
3. VOLUME UP
INCREASES SOUND LEVEL
4. SOURCE
SELECTS INPUT SOURCE (DVD/ USB/ CARD)
5. CC
CHANGE THE DVD SUBTITLE LANGUAGE
6. VOLUME DOWN
DECREASES SOUND LEVEL
7. IPTV
NO FUNCTION (TV)
8. LAST
NO FUNCTION (TV)
9. CHANNEL UP
PREVIOUS TRACK
10. FM
NO FUNCTION (TV)
11. FAVORITES
NO FUNCTION (TV)
12. CHANNEL DOWN
NEXT TRACK
13. NUMBER BUTTONS
DIRECT ACCESS TO TRACKS
14. PREVIEW
NO FUNCTION (TV)
15. SLEEP
NO FUNCTION (TV)
16. ALARM
NO FUNCTION (TV)
17. TIME
NO FUNCTION (TV)
18. STATUS
NO FUNCTION (TV)
19. SCREEN SIZE
SETS SCREEN SIZE (ZOOM)
20. NAVIGATION
USED TO NAVIGATE TV SETUP MENUS
AND DVD SETUP MENUS
21. B
REPEAT FUNCTION
22. SETUP
USED TO ENTER SETUP MENU
23. FUNCTION
NO FUNCTION (TV)
24. BACK
RETURN TO ROOT MENU OF DVD DISC
25. HOME
RETURN TO ROOT MENU OF DVD DISC
26. MEDIA CONTROL
CONTROLS DVD PLAYBACK
27. ESC
PUSH DISC IN OR OUT
28. MEDIA TITLE
RETURN TO SUBTITLE MENU OF DVD DISC
HealthCare Information, LLC
9
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
UNIVERSAL IR (IR4)
Universal remotes should be set for a Broksonic DVD player.
1
2
3
4
1.
POWER
POWER ON/OFF
2.
NUMBER BUTTONS
DIRECT ACCESS TO TRACKS
3.
ENTER
CONFIRM THE OPTION
4.
MENU
RETURN TO ROOT MENU
5.
CHANNEL UP
PREVIOUS TRACK
6.
DIRECTION BUTTONS
7.
CHANNEL DOWN
USED TO NAVIGATE DVD
SETUP MENUS
NEXT TRACK
8.
VOLUME UP
INCREASES SOUND LEVEL
9.
VOLUME DOWN
DECREASES SOUND LEVEL
8
5
10. SUBTITLE Button
CHANGE THE DVD SUBTITLE
LANGUAGE
11. PLAY Button
PLAY
9
6
7
12. REV Button
REWIND
13. FWD Button
FAST FORWARD
10
11
14. STOP Button
STOP
12
13
15
15. PAUSE Button
PAUSE
14
NOTE: Unspecified button have no function.
HealthCare Information, LLC
10
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
PILLOW SPEAKER CONTROL
Any digital pillow speaker with number buttons can be used through an HCI RoomMate television to control the DVD player.
Pillow speakers with custom HCI overlays with DVD functions printed on the button pad are available from both Curbell and
Anacom Medtek.
When the HDMI, Component or Composite input is selected on the RoomMate TV (usually the HDMI input) the number buttons
on the pillow speaker are used for DVD control. When the TV is in TV or DTV mode, the number buttons function normally.
For the pillow speaker to be able to control the DVD player, a six conductor RJ-11 cable must be connected from the TV serial
control port (labeled SER) to the DVD serial control port. Serial control in the TV “ADVANCE” menu must be set to “DVD”
BUTTON FUNCTIONS
1
EJECT
2
FAST FORWARD, MENU CHOICE UP
3
STOP
4
PLAY PREVIOUS TITLE, CHAPTER OR TRACK, MENU CHOICE LEFT
5
PLAY/PAUSE, MENU ENTER
6
PLAY NEXT TITLE, CHAPTER OR TRACK, MENU CHOICE RIGHT
7
DVD DISC MENU
8
FAST FORWARD, MENU CHOICE DOWN
9
DVD TITLE MENU
GENII IPTV SETUP FOR PILLOW SPEAKER CONTROL
1.
Enter the setup menu. (Function 0, 9999)
2.
Go to the SYSTEM menu
3.
Select SERIAL CONTROL
4.
Set SERIAL CONTROL to DVD
5.
Exit Setup menu.
Curbell pillow speaker
with custom HCI overlay
HealthCare Information, LLC
11
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
OPERATION
RoomMate TV
1.
Turn the TV and DVD player on.
2.
Use the “SOURCE” or “INPUT” buttons to select the DVD input source. Normally this will be the HDMI
input of a RoomMate set. The input source may be renamed DVD. See the RoomMate Operations Manual to
rename the source. The component, S-Video or audio/video inputs may also be used but the picture quality
will not be as good as using the HDMI port.
3.
Insert a DVD into the slot. Printed side faces the top of the DVD player. Push the DVD gently and slowly in
to the slot until the DVD player takes it.
4.
If the DVD has no menu content the DVD will start to play automatically. If the DVD contains menu content,
use the menu navigation buttons to select the main title and press the “ENTER” or “PLAY” button.
5.
When the DVD is finished, press the “EJECT” button and retrieve the DVD. Do not pull the DVD out of the
player until it is finished ejecting.
**NOTE: When you play the DVD disc, if you want to skip the warning and the advertising, you can press the STOP button
twice followed by PLAY button to directly access to DVD content.
Other TV
1.
Turn the TV and DVD Player on.
2.
Set the TV to the input source the DVD player is connected to.
3.
Insert a DVD into the slot. Printed side faces the top of the DVD player. Push the DVD gently and slowly in
to the slot until the DVD player takes it.
4.
If the DVD has no menu content the DVD will start to play automatically. If the DVD contains menu content,
use the menu navigation buttons to select the main title and press the “ENTER” or “PLAY” button.
5.
When the DVD is finished, press the “EJECT” button and retrieve the DVD. Do not pull the DVD out of the
player until it is finished ejecting.
HealthCare Information, LLC
12
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
ADVANCED SETUP
Use one of the following methods to access the setup menu.
1.
Press the rewind (left) and fast forward (right) buttons on the front panel at the same time.
2.
Using a RoomMate IR remote press and release the “SETUP” button followed by the “1” button and then the
“2” button.
3.
Press the menu button on the DVD IR remote. NOTE: The DVD player default IR remote is set for a
RoomMate IR remote. See page 17 to change the IR remote setting.
4.
Use the “UP”, “DOWN”, “LEFT” and “RIGHT” arrow buttons to navigate the menus. Press the “ENTER”
button to make selections.
5.
To return to the MENU selection bar press the “LEFT” arrow button.
6.
Press the “SETUP” button on a RoomMate IR remote or the “MENU” button on the DVD remote to exit setup
mode. Setup mode will also time out if no buttons are pressed.
SOFTWARE VERSION
To check the software version number of the DVD player, enter the setup menu per above instructions then using and IR remote,
press and release number buttons “1, 3, 8, 9” one at a time. Software version information will be displayed. Press the
“ENTER” button to exit version display. Setup menu will then be displayed.
MENUS
1.
General Menu
HealthCare Information, LLC
13
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
TV Display
Sets the aspect ratio (width to height ratio) of the picture. Selections are:
4:3/PS - 4:3/LB – 16:19
PS
LB
Angle Mark
Pan and Scan
Letter Box
Allows viewing of scenes from different angles. DVD must be recorded with
different angles for this function to operate. Turns Angle Mark on or off.
Selections are:
On – Off
OSD Lang
Selects the language used for the On-Screen-Displays. Selections are:
English – French – Spanish
Captions
Turns closed captions on or off. Selections are:
On – Off
Screen Saver
Turns screen saver on and off. Settings are:
On – Off
HDCD
High Definition Compatible Digital. Sets HDCD mode. Settings are:
Off – 1X – 2X
Last Memory
Turns memory function on or off. When on and player is turned off while playing,
play will resume at the power off point when power is turned back on. Settings are:
On – Off
Mp3 Lyric
Displays Mp3 lyrics if available. MP3 file and LRC song lyric document must have
the same filename. Selections are:
On - Off
2.
Audio Menu
Speaker Setup
Downmix
Selects sound mode.
Selects donwmix mode. Selections are:
LT/RT – Stereo
LT/RT
Dolby Surround mix suitable for Dolby Surround Pro Logic
decoding. Also known as Pro Logic or Left total/Right total.
Stereo
Dolby Surround mix suitable for use with headphones or standard
stereo system.
HealthCare Information, LLC
14
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
Post DRC
Dynamic Range Compression. Lower the dynamic range (volume difference
between high and low levels) for better playback quality on low quality stereo
systems. Selects post DRC mode. Selections are:
On – Off – AUTO
Spdif Setup
Spdif Output
Digital audio output setup.
Sets the SPDIF mode. Selections are:
Spdif Off – RAW – Spdif/Pcm
Lpcm Out
Sets the sampling frequency of the digital audio output. Selections are:
48K – 96K – 192K
NOTE: Karaoke Setup, CH EQ Setup and 3D process are not available.
3.
Dolby Menu
Dual Mono
Sets stereo audio output mode. Selections are:
Stereo – L-Mono – R-Mono – Mix-Mono
Stereo
Standard left and right audio output.
L-Mono Left channel is output on both audio output jacks.
R-Mono Right channel is output on both audio output jacks.
Mix-Mono
Left and right channels are mixed together and the mix is output
to both audio output jacks.
Dynamic
Sets the amount of stereo enhancement. Selections are:
FULL – 7/8 – ¾ - 5/8 – ½ - 3/8 – ¼ - 1/8 – OFF
HealthCare Information, LLC
15
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
4.
Video Menu
Component
Selects component YPBr output or S-video output. Both outputs can not be active
at the same time. Selections are:
S-Video – YUV
YUV – Component
Resolution
Sets output resolution. Selections are:
480I – 480P – 720P60 – 1080I60 – 1080p(60Hz) – 576I - 576P – 720P50 – 1080I50
1080p(50Hz)
Quality
Video setup
Sharpness
Adjusts picture sharpness. Selections are:
High – Medium – Low
Brightness
Adjusts picture brightness. Press “ENTER” to exit. Selections are:
-20 to +20
Contrast
Adjusts picture contrast. Press “ENTER” to exit. Selections are:
-16 to +16
Gamma
Sets Gamma correction. Selections are:
None – Low – Medium – High
Hue
Adjust color tone. Also know as tint. Press “ENTER” to exit. Selections are:
-9 to +9
Saturation
Adjusts color level. Press “ENTER” to exit. Selections are:
-9 to +9
Luma Delay
Adjusts the delay between the Luminance and chroma signals. Selections are:
0T–1T
HDMI Setup
HDMI
Setup for the HDMI output.
Turns HDMI output on or off. Selections are:
On – Off
Audio Source
Selects HDMI audio source track to playback from on a DVD. Selections are:
AUTO - PCM
HealthCare Information, LLC
16
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
5.
Preference Menu
NOTE: To access the Preference Menu page the DVD player must be in the stop mode.
IR
Selects IR band. Selections are:
IR1 – IR2 – IR3 – IR4
IR 1
IR 2
IR 3
IR4
HCI RoomMate IR Remote Band 1
HCI RoomMate IR Remote Band 2
DVD Mini Remote
Universal IR remote Broksonic codes.
NOTE: The DVD player will always respond to an RoomMate IR remote is the player is
connected to an HCI RoomMate television via the serial port. Serial control in the TV
“ADVANCE” menu must be set to “DVD”
NOTE: Press and hold the “POWER” button for 10 seconds on a RoomMate IR remote to
change the IR band.
PBC
Playback Control. Allows interactive playback control for Video CD 2.0 and Super Video
CD 1.0 discs. Selections are:
On – Off
Audio
Selects the audio playback language. Disc must have the selected language recorded.
Selections are:
English – French – Spanish – Others
For others you must enter the language code then select OK and press the “ENTER” button.
Subtitle
Selects the subtitle language. Disc must have the selected language recorded. Selections are:
English –French – Spanish – Off – Others
For others you must enter the language code then select OK and press the “ENTER” button.
Disc Menu
Selects the disc menu language for disc equipped with interactive menus. Selections are:
English –French – Spanish – Others
For others you must enter the language code then select OK and press the “ENTER” button.
HealthCare Information, LLC
17
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
Parental
Sets the parental control rating. Any content rated above the set rating can not be viewed.
Selections are:
KID SAF – G – PG – PG 13 – PGR – R – NC17 – ADULT
Password
Sets password mode and password.
Password Mode
Turns password mode on or off. Selections are:
On – Off
Password
Default
Changes password.
Resets all settings to factory defaults.
CLEANING
CAUTION: Make sure that the power cable is removed from the AC outlet before cleaning the product.
Do not use a volatile solvent (such as toluene, rosin and alcohol) to clean the housing and remote control. Such chemicals may
damage the housing, housing and remote control cause the paint to peel.
Use only a soft dry cloth for cleaning the housing and remote control.
If the housing or remote control is heavily contaminated, use a soft cloth moistened with a mild soap and water solution. Wring
solution out of cloth before cleaning to prevent solution from entering the housing or remote control.
SPECIFICATIONS
GENERAL
POWER
POWER CONSUMPTION
DIMENSIONS
WEIGHT
SHIPPING WEIGHT
VIDEO SYSTEM
AUDIO FREQUENCY RANGE
AUDIO SIGNAL TO NOISE RATIO
AUDIO DYNAMIC RANGE
120VAC 60Hz
15W
315MM X 160MM X 61MM (L X W X H)
12.5” X 6.5” X 2.5” (L X W X H)
3.6LBS
4.8LBS
NTSC
20Hz TO 20KHz +/- 1dB
>90Db
>80Db
INPUT/OUTPUT
FRONT INPUTS
USB, SD/MS/MMC
REAR INPUTS
RF, SERIAL CONTROL PORT (RJ-11)
REAR OUTPUTS
HDMI, COMPONENT, COMPOSITE, AUDIO L, AUDIO R
S-VIDEO, DIGITAL AUDIO, RF
DIGITAL MEDIA SUPPORT
VCD, SVCD, DVD, MP3, MP4, JPEG, HDCD, CDDA, WMA, CD-G, CD-RW, DVD-R, DVD+R, DVD-RW,
DVD +RW, HDVD Kodak Picture CD, USB Flash Drive (MP3, MP4, JPEG) and SD/MS/MMC memory
cards.
HealthCare Information, LLC
18
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
PRODUCT LIMITED WARRANTY
HCI warrants, to the original purchaser only that all new HCI DVD players (excluding any equipment manufactured by others
and included in HCI shipment) are free from defects in material for a period of one year from the date of shipment.
The dealer your product was purchased through must receive notice of a defect or malfunction occurring during the warranty
period. HCI will repair or replace goods returned to its Loveland, Ohio office, at its discretion, free of charge to the original
purchaser, the whole or any component part of any product manufactured by HCI found to be defective.
As a condition to obtaining warranty service, notification must be given to the dealer the product was purchased through within
at least 10 days after defect is first observed. Repair of product requires it to be shipped to HCI in Loveland, Ohio. All shipping
and freight charges to HCI shall be paid for by the customer and will not be accepted without a Return Merchandise
Authorization Number (RMA#). The dealer can provide you information on how to obtain the RMA#.
This warranty does not apply to any HCI products subjected to improper use, negligence or accident; nor to tampering,
alterations, or repairs by others, without HCI’s written prior notice. For more information pertaining to this warranty, please
contact the dealer you purchased your product from.
HCI’s liability under this warranty is limited to repair or replacement of defective products and parts as provided above. HCI
shall not be liable for incidental or consequential damages.
HealthCare Information, LLC
19
----------------------------------------------------------------------------------------DVD2 OPERATIONS MANUAL
HealthCare Information, LLC
20
DID WE MENTION THE ROOMMATE SERIES OF TVS?
AVAILABLE IN 20”, 26”, 32” & 42” SIZES
HealthCare Information, LLC
113 Commerce Blvd.
Loveland, OH 45140
800-783-8105
©Copyright 2009, HealthCare information, LLC