Getting Started Connecting Your Device Connect the Soundbar and the audio line. TV PC CD/DVD Powering On Make sure that the soundbar is plugged into a power source. Push the on/off button on the remote control. The LED indicator light on the front will light up. User’s Manual Ematic Soundbar ESB212 EQ Function Remote Control Press the EQ button to choose from the equalizer options: music, movie, standard, etc. Bluetooth™ Mode Press the MODE button to switch to Bluetooth mode. 1. You will hear a tone, and a green light will ﬂash. 2. Scan for devices in your Bluetooth settings. 3. Connect to ESB212 when scan has completed. 4. The default password is: 0000. AUX Mode Press the MODE button to switch to AUX mode. Speciﬁcations • • • • • • 30W 2.0 Channel Soundbar with Bass Enhancer Total Peak Power 50W Ultra-thin 55mm / 2.2” deep Frequency Response: 100Hz-20kHz Voltage AC: 100-240 / 50-60Hz Speaker driver: 50mm full frequency driver + 116 x 45mm bass enhancer • Input Sensitivity: 850mV • AUX in, Bluetooth input Customer Support Visit ematic.us/support for customer service regarding your device. Connect Soundbar to another device to stream music. Note: MP3 Line-in and AUX mode use the same audio input channel. Both cannot be played at the same time. To submit a request, ﬁll out the required information online. You will be provided a ticket number regarding your issue, which you can refer to when contacting us further. ©2014 Ematic. All Rights Reserved. Bluetooth and the Bluetooth logo are trademark of Bluetooth SIG, Inc and used by Ematic under a license. 1 Year warranty from the date of purchase, 90 dys only on labor.