Owner’s Manual: 1015 Speed Demon 1 One-Gallon Vortex Mixer

Owner’s Manual:
1015 Speed Demon 1
1784593 Rev M
ECO 14-0083
June 2014
One-Gallon Vortex Mixer
Models:
0-1015-PB (110V, 60 Hz, Digital Display)
0-1015-SP (110V, 60Hz, Side Panel Mechanical Timer)
1015-PB
1015-SP
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
1784593 Rev M
ECO 14-0083
June 2014
Table of Contents
1. Safety Information 3
1.1 Safety Precaution Labels 4
1.2 Safety Precaution Summary 5
2. Introduction 6
2.1 Application 6
2.2 Specifications 6
2.3 Control Panel - 1015 PB 7
2.3 Control Panel - 1015 SP 7
3. Installation 8
3.1 Unpacking 8
6. Troubleshooting 10
7. Wiring Diagrams 11
7.2 1015 SP 11
7.2 1015 PB 12
8. Exploded Views 13
8.1 PB Electrical Assembly 13
8.2 SP Electrical Assembly 14
8.4 Enclosure Components 15
8.5 Frame Assembly 16
8.6 Drive Assembly 17
4. Operation—1015PB 9
9. Ordering 18
5. Cleaning 9
10. Warranty 19
4.1 Install a Container 9
Replacement Parts 18
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
2
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
1784593 Rev M
ECO 14-0083
June 2014
1. Safety Information
Review this owner’s manual and read all warning labels on the machine prior to use.
The three main safety notifications used in this manual and on the warning labels are WARNING, CAUTION
and NOTICE. They have specific meanings and indicate the potential dangers from misuse of the machine.
“WARNING!” indicates a hazardous situation, which, if not avoided,
could result in death or serious injury. These serious injuries could
include permanent loss of function or significant disfigurement, disability,
considerable pain and suffering, amputations, severe burns, and loss or
impairment of vision or hearing. Take all necessary precautions to avoid
unnecessary injury.
“CAUTION!” indicates a hazardous situation, which, if not avoided, could
result in minor or moderate injury.
NOTICE
“NOTICE” indicates practices that do not involve physical injury but may
damage the machine.
Safety Information, continued...
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
3
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
1784593 Rev M
ECO 14-0083
June 2014
...Safety Information, continued
1.1 Safety Precaution Labels
Safety Information, continued...
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
4
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
1784593 Rev M
ECO 14-0083
June 2014
...Safety Information, continued
1.2 Safety Precaution Summary
WARNING! Avoid death or serous injury!
DO NOT attempt to replace any damaged
electrical wire or components. Improper
replacement could result in electric shock and
serious injury. Only a qualified service
representative should attempt to repair or replace
any damaged electrical components.
Review this owner's manual before installing or
operating.
The machine must be properly grounded prior to
use. In the case of an electrical short circuit,
grounding reduces the risk of electric shock by
providing an escape wire for the electric current.
The machine’s power cord has a grounding wire
with an appropriate grounding plug. This plug must
be inserted into an electrical outlet that is properly
installed and grounded according to all local codes
and ordinances.
If you must repair or replace the power cord or
plug, DO NOT connect the grounding wire to either
flat-blade terminal. The wire with insulation having
an outer surface that is green (with or without
yellow stripes) is the grounding wire.
Check with a qualified electrician if you don’t
completely understand these grounding
instructions, or if you are not sure whether the
machine is properly grounded. DO NOT modify the
plug provided; if it won’t fit in the outlet, have a
proper outlet installed by a qualified electrician.
To avoid electric shock, don’t get the timer,
control panel, or wiring wet.
DO NOT mix flammable or combustible
materials in this mixer.
Review product label, Material Safety Data
Sheet, and HMIS rating of materials prior to mixing
to determine potential hazards.
DO NOT use solvent-based cleaners or
thinners.
Use in a dry and well-ventilated environment
where dust and flammable vapors are not present.
CAUTION! Avoid minor or moderate
injury!
Keep the work area free of clutter and
electrical cords.
Avoid extension cords. To minimize the risk
of improper electrical grounding, extension
cords are not recommended. If an extension
cord is unavoidable, consult a qualified electrician
to determine what type of extension cord will
satisfy the grounding, current capacity, and other
requirements of the particular situation.
Use the proper power source. Refer to the
machine data plate on the right side panel or
the section 2.2, Specifications, in this manual.
Disconnect the power cord before servicing,
cleaning, or removing any covers
Keep customers away from the work area.
The machine should be used only by properly
trained individuals.
Follow the lockout/tagout procedures of your
company.
Clamp the can carefully to ensure that it is
held securely during the mixing cycle.
DO NOT open the door until the machine comes
to a complete stop.
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
5
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
1784593 Rev M
ECO 14-0083
June 2014
2. Introduction
2.1 Application
2.2 Specifications
Congratulations on your purchase of the Speed
Demon 1 Vortex Mixer. This machine is designed
to accommodate single round pint, quart, or gallon
plastic or metal containers weighing up to 15 lb.
(6.8 kg). It can also accommodate square cans
when used in conjunction with the optional adapter,
part no. 9783761. See section 9, Ordering, for
ordering instructions.
Unit Size, 1015PB: W 15 in. (38.1 cm) D 21.5 in.
(54.6 cm) H 20.5 in. (52.1 cm)
Understand your machine's features and proper
operation to take full advantage of its capabilities.
Maximum Capacity: 15 lb. (6.8 kg)
Read this entire manual completely before
operating the machine. Practice installing and
removing a pail before mixing for the first time.
Keep this manual for future reference.
Unit Size, 1015SP: W 17 in. (43.18 cm) D 21 in.
(52.07 cm) H 23 in. (58.4 cm)
Machine Weight
PB: 113 lb. (51.3 kg)
SP: 116 lb. (52.6 kg)
Sizes Mixed: One pt., one qt, one gal.
Electric Service: 110 V 60 Hz
110 V Units
Machines rated at 110 V, 60 Hz are for use with a
nominal 120 V circuit.
Always follow all safety instructions!
20.5"
(PB)(PB)
20.5"
23" (SP)
15" (PB)
15" (PB)
17" (SP)
17" (SP)
17"
21.5" (PB)
21.5" (PB)
21" (SP)
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
6
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
2.3 Control Panel - 1015 PB
1784593 Rev M
ECO 14-0083
June 2014
2.3 Control Panel - 1015 SP
•
Operation Indicator (A): This light is
illuminated during machine operation.
•
E-STOP (A): Push only to immediately cut the
power to the machine.
•
Power Switch (B): Turn the power off or on.
•
Timer (B): Turn to set the mix cycle length.
•
Digital Display (C): View programming
revision and cycle time remaining.
•
Two-Minute Cycle (D): Push to set a twominute cycle, and to increase cycles in two
minute increments.
•
Three-Minute Cycle (E): Push to set a threeminute cycle, and to increase cycles in three
minute increments.
•
Stop (F): Press to stop a cycle before the
preset time expires.
(A)
(A)
(B)
(C)
(E)
(F)
(B)
(D)
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
7
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
3. Installation
3.1 Unpacking
This machine was shipped fully assembled.
Before plugging in the machine or attempting to
operate it:
1. Use a 1/2 in. combination wrench and a 1/2 in.
socket wrench to remove the shipping bolts at the
back of the mixer (at the end of the yellow lanyard).
To loosen, turn the bolts counter- clockwise until
the nuts and washers have been removed from the
bottom side of the pallet. It may be necessary to
prop the machine up to get at the nuts underneath
the pallet.
2. Slide the bolts up through the frame and out of
the mixer. Set aside the bolts, washer, nuts, and
yellow lanyard in case they are needed for future
shipment of the mixer.
3. Set the machine on a stable, level surface
and plug it in an appropriately grounded outlet
(see section 1.2, Safety Precaution Summary, for
grounding information).
NOTE: If the machine needs to be shipped any
time, contact Red Devil to obtain the appropriate
packaging kit, part no. 6784975. See section 9,
Ordering, for ordering information.
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
8
1784593 Rev M
ECO 14-0083
June 2014
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
4. Operation—1015PB
1784593 Rev M
ECO 14-0083
June 2014
5. Cleaning
4.1 Install a Container
Always unplug the power cord before cleaning!
DO NOT get the timer, control panel, or wiring wet.
1. Open the cabinet Door
2. Load the can into the machine for mixing:
•
Gallon Cans: Insert the can into the can
holder. Slip the bail handle into the clip
retainers (D).
•
Quart Cans: Place the can inside the quart
adapter (A). Set the quart can horizontally with
the lid up. Insert the adapter into the can holder
(B). Make sure the adapter lugs (C) are lined
up with the bail retainers and the adapter is all
the way to the bottom of the can holder.
(A)
CLEANING:
Keeping the machine clean is important for reliable
operation.
• Colorant or base paint spilled on machine
surfaces can be removed using lukewarm
water and mild detergent for water-based/glycol
colorants.
• To preserve the appearance of the machine, do
not use abrasives to clean machine surfaces.
(C)
(D)
(B)
3. Attach the clip retainer (D) to the container
handle.
4. Close the cabinet door. The mixer has a safety
switch that interrupts operation if the door is open.
5. Select the desired mix time.
If the container handle wasn’t properly secured,
press the STOP button on the control panel.
NOTE: If colorant has been added to the paint,
be sure to reattach paint can lid tightly (using the
RED DEVIL EQUIPMENT 1-Gallon Pail Press,
Part No. 0-5080-01).
Select mix time by either turning the timer dial
clockwise (1015SP models) or press a preset mix
cycle push button (1015PB models).
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
9
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
6. Troubleshooting
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
10
1784593 Rev M
ECO 14-0083
June 2014
BLU
5784216
MOTOR HARNESS
W
G
BL
5784650
MOTOR TO JUNCTION
BOX HARNESS
W
G
BL
W
MOTOR
5785917
DOOR
SWITCH
5783815
B/W
2
1
E-STOP
SWITCH
5784827
1
2
5756700
TIMER
ASSEMBLY
NO
C
WIRE COLOR CODE:
BL = BLACK
B/W = BLACK W/WHITE STRIPE
G = GREEN
W = WHITE
BLU = BLUE
BR = BROWN
9780542
ORANGE
WIRE NUT
WIRE
E-STOP/SWITCH
5782556
7.2 1015 SP
POWER CORD
5780485
BR G
G
9780542
ORANGE
WIRE NUT
9786545 ENCLOSURE, SIDE CONTROL
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
1784593 Rev M
ECO 14-0083
June 2014
7. Wiring Diagrams
Wiring Diagrams, continued...
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
11
9784606
JUNCTION
BOX
12
BLU
G
DOOR
SWITCH
5783815
W
G
BL
MOTOR
5785917
5784650
MOTOR TO JUNCTION
BOX HARNESS
5784216
MOTOR HARNESS
G
BL
W
W
B/W
5756700
TIMER
WIRE COLOR CODE:
BL = BLACK
B/W = BLACK W/WHITE STRIPE
G = GREEN
W = WHITE
BLU = BLUE
BR = BROWN
NO
C
7.2 1015 PB
POWER CORD
5780485
BR G
G
9780542
ORANGE
WIRE NUT
6784531 CONTROL PANEL ASSEMBLY
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
Wiring Diagrams, continued...
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
1784593 Rev M
ECO 14-0083
June 2014
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
1784593 Rev M
ECO 14-0083
June 2014
8. Exploded Views
8.1 PB Electrical Assembly
8
5
8
10
3
5
10
3
1
7
6
7
1
9
6
9
4
4
2
2
1
2
3
4
5
6
7
8
9
10
PART
DESCRIPTION
PART
NO.NO.DESCRIPTION
Box, Digital Display
1
9786423
Box,
Digital Display
9786423
2
9782603
Strain Relief
9782603
Strain
Relief
3
9781840 Nut, Keps,
#8-32
9781840
4 9786539 Nut,
Keps,
#8-32
Control
Panel
5
5786233 Control
120V Digital
Timer
9786539
Panel
Digital Display Label
6 1786540
5786233 120V Digital Timer
7
5782445 Power Switch
Display
Label
1786540
8
9783595 Digital
Nut, Nylock,
#4-40
9
9786232 Power
SpacerSwitch
5782445
10
5782448 Nut,
Operation
Light
9783595
Nylock,
#4-40
9786232
Spacer
5782448
Operation Light
PART NUMBERS LISTED MAY ONLY BE AVAILABLE IN KIT FORM OR AS AN ASSEMBLY
Exploded Views, continued...
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
13
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
1784593 Rev M
ECO 14-0083
June 2014
...Exploded Views, continued
8.2 SP Electrical Assembly
3
3
9
9
4
4
2
2
5
1
5
8
6
7
1
8
7
7
6
7
1
2
3
4
5
6
7
8
9
PART NO. DESCRIPTION
9786545
Side Panel
Timer
5756700
Knob DESCRIPTION
9756960
PART NO.
LabelPanel
1 1786543
9786545Timer Side
2 9784648
5756700CoverTimer
9783518
Rubber Grommet
Knob
3
9756960
9781840
Nut, Keps, #8-32
4 9784198
Timer
Label#4, Thread Forming
1786543Pan Head
Screw,
5 5784827
9784648E-StopCover
Switch
6
9783518
7
9781840
8
9784198
9
5784827
www.RedDevilEquipment.com
Rubber Grommet
Nut, Keps, #8-32
Pan Head Screw, #4, Thread Forming Exploded Views, continued...
E-Stop800-221-1803
Switch | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
(PHONE)
PART NUMBERS LISTED MAY ONLY BE AVAILABLE IN KIT FORM OR AS AN ASSEMBLY
14
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
1784593 Rev M
ECO 14-0083
June 2014
...Exploded Views, continued
8.4 Enclosure Components
2
6
9
9
2
16
14
14
6
14
16
18
14
18
19
19
17
17
14
14
3
3
5
5
88
77
4
10
4
13
12
13
12
11
10
11
1
1
15
15
PART NO. DESCRIPTION
1 9784550 Enclosure
11
PART
NO.
DESCRIPTION
2 9784551 Door
12
Enclosure
9784550Back
Panel
3 1 9784552
13
Door
2
9784551
4 9784589 Door Seal
14
BackSelf-Threading,
Panel
9784552Screw,
5 3 9783385
15
#10-32
9784589Bumper
Door Seal
6 4 9782681
16
9783385PanScrew,
Self-Threading,
#10-3217
7 5 9781142
Head Screw,
#10-32 x .50
8 6 9780633
18
Washer, #10
Bumper
9782681Lock
9 7 9783510
Limit
Switch
Actuator
9781142 Pan Head Screw, #10-32 x .5019
108 9780381
HeadWasher,
Screw, #8-32
9780633PanLock
#10 x .38
PART NO. DESCRIPTION
9784425 Bronze Flange Bearing
PART NO. DESCRIPTION
9784426 Steel Sleeve
Bronze
Flange
11 9784425
9780886
Hex Screw,
3/8-x16
x 1.00Bearing
12 9784426
Steel
Sleeve
9781840
Nut, Keps,
#8-32
13
9780886
Hex
Screw,
3/8-x16 x 1.00
9783672 Plug, 1/4 Hole
14 9781840
Nut,Bracket
Keps, #8-32
9783503
Limit Switch
15 9783672
Plug, 1/4 Hole
5783815
Limit Switch
9641300
Washer,Limit
Flat, #8
16 9783503
Switch Bracket
9781338
Screw,
Pan
Head,
#8-32 x 1.00
17 5783815 Limit Switch
18 9641300 Washer, Flat, #8
9 9783510 Limit Switch Actuator
19 9781338 Screw, Pan Head, #8-32 x 1.00
PART NUMBERS LISTED MAY ONLY BE AVAILABLE IN KIT FORM OR AS AN ASSEMBLY
10 9780381 Pan Head Screw, #8-32 x .38
Exploded Views, continued...
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
15
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
1784593 Rev M
ECO 14-0083
June 2014
...Exploded Views, continued
8.5 Frame Assembly
3
3
4
4
8
8
1
1
7
5
7
2
5
2
6
6
1
2
3
4
5
5
6
7
8
PART NO. DESCRIPTION
Base
9784556
Foot
9782044
Rubber Isolator
9781929
9784589
Door Seal
9784915
Hex
3/8-16 x 2.00
PART NO.Screw,
DESCRIPTION
9780886
Hex Screw,
3/8-16 x 1.00
Base
1 9784556
9780343
Nut, Nylock, 1/4-20
Foot
2 9782044
Riser
9785915
Rubber
Isolator
3 9781929
9780193
Nut, Nylock,
3/8-16
4
9784589
(SP model)
(-00, -PB, -E5 models)
(SP model only)
Door Seal
Hex Screw, 3/8-16 x 2.00
(SP model)
(-00, -PB, -E5 Exploded
models) Views, continued...
Hex Screw, 3/8-16 x 1.00
Nut, Nylock,
1/4-20
(PHONE)
800-221-1803
| (INTL) +1-763-533-2969 | (FAX) 763-852-1811
Riser
(SP model only)
Nut, Nylock, 3/8-16
PART NUMBERS
LISTED MAY ONLY BE AVAILABLE IN KIT FORM OR AS AN ASSEMBLY
5 9784915
5 9780886
6 9780343
www.RedDevilEquipment.com
7 9785915
16
8 9780193
Owner’s Manual: 1015 Speed Demon 1
22
One-Gallon
Vortex
Mixer
17
1784593 Rev M
ECO 14-0083
June 2014
6
...Exploded Views, continued
18
21
8.6 Drive20Assembly
22
17
6
19
18
29
20 21
14
19
15
9
29
28
14
7
7
9
15
28
28
8
9
13
12
5
28
8
10
9
10
1
16
12
3
15
7
7
16
13
15
10
5
1
26
3
27
10
26
27
5
2
23
3
2
4
3
5
23
25
4
5
25
24
5
24
12
12
1
2
3
4
5
6
6
7
8
9
10
11
12
13
14
15
PART NO.
9784523
9784513
9781903
9784525
9784334
5784633
5785917
9784514
9784515
9784640
9781904
9784555
9781414
9784919
9780257
9782995
PART NO.
DESCRIPTION
12
11
PART NO.
12
11
DESCRIPTION
DESCRIPTION
PART NO. DESCRIPTION
Mix Frame
16
9784639
1
9784523
Bevel Gear, Large
Mix Frame 2
9784639
Bevel17Gear,
Large
Housing16
9784513
9783717
Aluminum Can Holder
Housing
9783717
Aluminum
Can HolderRubber Ring
18
9782432
3
9781903
Bearing,17
5/8 Bore
19 Ring
9781383
Nut, Nylock, #10-32
Drive Shaft
Rubber
18
9782432
Bearing, 5/8 4Bore9784525
9784334
20
9784541
Square Key,
x .75
19 3/16
9781383
Nut, Nylock,
#10-32 Spring Tab
Drive Shaft 5
Pad
21Tab9784560
Motor, E5
(220v/50Hz) Spring
20models
9784541
Square Key, 63/16 5784633
x .75
6
5785917
22
9784698
1/4 HP Motor
Hex Screw, 1/4-20 x .50
Pad
21
9784560
Motor, E5 models (220v/50Hz)
7
Rotating Arm
9784514
23
9781918
Pulley, E5 models, (220v/50Hz)
22Shaft9784698
1/4 HP Motor8
Hex Screw,
1/4-20 x .50
9784515
23
9784652
Can Drive
Small Pulley
Rotating Arm9
23
9781918
Pulley,
E5
models,
(220v/50Hz)
9784640
24
9784527
V Belt, E5 models, (220v/50Hz)
Bevel Gear
9784652
Can Drive Shaft
Small24Pulley
Big Pulley
10
9781904
9782182
Spacer 23
V Belt
25 E5 9784651
Hex SEMS
x .75
24 1/4-20
9784527
V Belt,
models, (220v/50Hz)
Bevel Gear 11 9784555
12
9781414
26
9780402
Washer,24
Fender,9782182
1/4
Washer, 3/8, Split Lock
Big Pulley
Spacer
13
9784919
Hex Screw, 3/8-x16 x 1.00
Hex Screw, 1/2-13 x 3.00
V Belt27 9780886
25
9784651
Hex SEMS 1/4-20
x .75
28
9784554
14
9780257
Nut, Nylock, Thin, 1/2-13
Cap Screw, 1/4-20 x 1.25
26
9780402
Washer, Fender,
1/4
Washer,
3/8,
Split
Lock
15
9782995
29
9780343
Nut, Nylock, 1/4-20
Washer, 1/2 ID
27
9780886
Hex Screw, 3/8-x16 x 1.00
Hex Screw, 1/2-13 x 3.00
28
9784554
Nut, Nylock, Thin, 1/2-13
Cap Screw, 1/4-20 x 1.25
29
9780343
Washer, 1/2 ID
Nut, Nylock, 1/4-20
PART NUMBERS LISTED MAY ONLY BE AVAILABLE IN KIT FORM OR AS AN ASSEMBLY
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
17
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
1784593 Rev M
ECO 14-0083
June 2014
9. Ordering
Replacement Parts
HOW TO ORDER REPLACEMENT PARTS
Replacement parts can be ordered from Red Devil Equipment Co. by telephone, fax, or email:
RED DEVIL EQUIPMENT CO.
763-533-2969
800-221-1083
763-852-1811 (FAX)
[email protected]
If you need help in determining the proper part(s) to order, please call customer service. at 1-800-221-1083.
Always indicate the Model and Serial numbers of the machine when ordering replacement parts.
GENERAL PARTS REPLACEMENT POLICIES
While your machine is under warranty, do not attempt on-site repair or parts replacement without first
contacting Red Devil Equipment Co. (to protect your warranty). After the warranty expires, replacement parts
and recommendations for on-site servicing are available from Red Devil Equipment Co. Please Customer
Service for assistance.
RESTOCKING FEE
A restocking fee will be charged on all unused parts which are returned.
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
18
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
1784593 Rev M
ECO 14-0083
June 2014
10. Warranty
Equipment Covered Under This Warranty:
Model 1015 PB & SP
Warranty
Red Devil Equipment Co. warrants equipment manufactured by it and bearing its name to be free from defects
in material and workmanship.
Red Devil Equipment Co. will provide replacement parts caused by failure due to production or manufacturing
error for a period of two years. Costs of labor and transportation for service of machines under this warranty
will also be covered during the warranty period. Normal ground freight will be covered for replacement parts
sent within the warranty period. UPS Ground or common carrier ground freight will be covered for the return of
defective items only.
This warranty applies only when the equipment is installed, operated, and maintained in accordance with
written Red Devil Equipment Co. instructions as appearing in the owners' manuals.
This warranty does not cover, and Red Devil Equipment Co. shall not be liable for, any malfunction, damage,
or wear caused by faulty installation, misapplication, abrasion, corrosion, inadequate or improper maintenance,
negligence, accident, tampering, or substitution of non-red Devil Equipment Co. component parts, modification
or use for non-intended purposes. Nor shall Red Devil Equipment Co. be liable for malfunction, damage,
or wear caused by the incompatibility with Red Devil equipment Co. equipment of structures, accessories,
equipment, or materials not supplied by Red Devil Equipment Co.
Disclaimers and Limitations
The terms of this warranty constitute purchaser;s sole and exclusive remedy and are in lieu of any other
warranties, express or implied. In no case shall Red Devil Equipment Co.'s liability exceed the amount of
the purchase price. *All warranty repairs must be executed by a Red Devil Equipment Co. Authorized
Service Center or warranty will be voided.
Please contact your Red Devil Equipment Co. account representative at 800-221-1083 for specific questions
regarding warranty terms.
www.RedDevilEquipment.com (PHONE) 800-221-1803 | (INTL) +1-763-533-2969 | (FAX) 763-852-1811
19
Owner’s Manual: 1015 Speed Demon 1
One-Gallon Vortex Mixer
For sales or service, please contact:
Red Devil Equipment Company
Attn: Customer Service Department
14900 21st Ave N
Plymouth, MN 55447
USA
U.S. Telephone:
International Telephone:
Fax:
E-mail:
800.221.1083
+1.763.533.2969
763.852.1811
[email protected]
www.RedDevilEquipment.com
For instructional “How To” videos please visit:
www.RedDevilEquipment.com
Copyright 2014 Red Devil Equipment Company. All rights reserved.
1784593 Rev M
ECO 14-0083
June 2014