1. science
2. computer science
3. software engineering

ITS-EASY
Annual Symposium 2013
September 25th
Aros Congress Centre, Västerås
Content
Welcome
2
Keynote presentations
3
Agenda
4
Participants
5
Management team
6
Board
7
Industrial committee
8
ITS-EASY companies
9
ITS-EASY PhD students
10
Publications
14
Planned courses
16
ITS-EASY+ companies
18
ITS-EASY+ PhD students
19
www.mrtc.mdh.se/projects/itseasy
Welcome to
ITS-EASY 2nd Annual Symposium!
ITS-EASY is just starting the third year – it started October 1st 2011.
ITS-EASY is a large organisation: it counts 16 PhD students, 10 main
advisors from the university, 15 co-advisors from the university and the
partner companies, and more than 20 associated members; senior
researchers and industrial specialists. The board, led by Helena
Malmqvist, ABB, has five members, and the industrial committee
where all participating companies are represented, has 9 members.
The management team of the research school consists of five members.
All in all, about 75 persons are directly engaged in ITS-EASY, which is
quite a large consortium, the result expected, and already visible
results are far above the results of “standard” 16 PhD students. The
PhD students have published more then 35 research papers which is a
respectable number.
In addition, ITS-EASY, directly or indirectly, boosted many new activities in cooperation with the
industrial partners, and with the international research centers. In these two years, for example,
MDH and ABB have signed a partnership agreement, and MDH became a preferred research
partner of Volvo. The ITS-EASY board members have led or directly been involved in this process.
We have also increased a cooperation by exchanging staff between MDH and the partners; for
example Kristina Forsberg from SAAB Electronic Systems became an adjunct professor at IDT,
Embedded Systems research direction. We also had a successful visit to University of Paderborn,
Germany, one of the leading universities in Software Engineering research and know for their
successful cooperation with industry.
ITS-EASY+
Extending ITS-EASY Postgraduate school
From October 1st 2013 eight new industrial PhD students are joining ITS-EASY! The new students
will join ITS-EASY and participate in all activities planned for ITS-EASY. The experienced
colleagues will help the new students with the advices from their experienced colleagues how to
organize their “research” life. ITS-EASY+ students, we wish you a warm welcome to ITS-EASY!
IST-EASY is affiliated with the School of Innovation, Design and Engineering (IDT) at Mälardalen
University (MDH), as an integrated part of the MDH strategic research area Embedded Systems
(ES).
2
Keynote presentations
Jan Bosch: Speed and Innovation through
Architecture and New Ways of Working
The nature of software system development is changing. Rather than
building systems according to specification, innovation processes and
customer intimacy are at the heart of software development, requiring
unprecedented levels of agility and speed. In addition, software is
increasingly built in the context of a software ecosystem where other
companies and independent developers add value as well. As these trends
require small teams to work efficiently and rapidly in the context of large
complex systems, the role of software architecture (and that of a software
architect in particular) is more important in this new world, but there is
significant evolution in its implementation. This talk starts by
characterizing the new approach to software engineering and the role of
compositionality. It then explores the implications for software
architecture and the role of the software architect. The talk will present
examples from several industries to illustrate specific focus areas.
About Jan Bosch
In 2011 Jan returned to academia as a professor of software engineering at
Chalmers University of Technology after 8 years in industry. Earlier, he
worked as VP Engineering Process and VP Open Innovation for Intuit in
Mountain View, California. Prior to joining Intuit, Jan worked for several
years at Nokia Research Center. Before that he lived 4 years in the
Netherlands where he is a full professor of Software Engineering at the
University of Groningen.
Nicole Levy: French Research Tax Credit:
a powerful incentive for companies' research
Regardless of direct aid, a number of OECD countries have a tax support
for R & D system. In France, the Research Tax Credit (CIR for « Crédit
Impôt Recherche ») was created in 1983. In 2008, a major reform put it
to a volume-based scheme of 30% to €100M of expenses in Research
&Development activities then 5%. The reduction of the cost of R & D aims
at encouraging companies to increase their investment in research. This
public support is justified by the externalities generated by the R & D for
the benefit of the entire French economy and the risks taken by companies
in the process of research and innovation. This public support contributes,
through the stimulation of investment in R & D companies to increase the
innovation capacity of France and ultimately its ability to grow.
The presentation will explain how companies can obtain this aid and the
impact of it.
About Nicole Levy
Professor in Computer Science at CNAM, a public higher education
establishment and referent expert of the french Ministry of Research and
Higher Education for the Research Tax Credit.
3
Agenda
8:30 – 09.00
Registration
9:00 - 09:15
Opening session
9:15 - 10:00
Keynote presentation I, Jan Bosch
Speed and Innovation through Architecture and New Ways of Working
10:00-10:30
Coffee
10:30 - 11:15
ITS-EASY 2012–2013, including plans for the nearest future
11:15 - 12.30
New PhD students in ITS-EASY+
12:30 - 13:30
Lunch
13:30 - 14:00
Mats Waltré:, the Knowledge Foundation:
Supporting research with industrial cooperation
14:00 - 14:45
Keynote presentation II, Nicole Levy:
French Research Tax Credit: a powerful incentive for companies' research
14:45 - 15:15
Coffee
15:15 - 16:30
ITS-EASY PhD students' short presentations
16:30 - 17:30
ITS-EASY PhD students´ poster presentations
17:30
Closing the symposium
18:00
Dinner at ACC
4
Participants
ABB
Daniel Hallmans
MDH
Abu Naser Masud
ABB
Gaetana Sapienza
MDH
Eduard Paul Enoiu
ABB
Peter Löfgren
MDH
Elaine Weyuker
ABB
Tiberiu Seceleanu
MDH
Federico Ciccozzi
Addiva
Dag Lindahl
MDH
Gordana Dodig Crnkovic
Addiva
Daniel Söderholm
MDH
Gunnar Widforss
Addiva
Liz Hoffman
MDH
Ivica Crnkovic
Addiva
Melika Hozhabr
MDH
Jiale Zhou
Addiva
Thomas Wilen
MDH
Kaj Hänninen
Bombardier
Christer Persson
MDH
Kristina Lundqvist
Bombardier
Luciana Provenzano
MDH
Magnus Otterskog
Bombardier
Mathias Ekman
MDH
Malin Rosqvist
Bombardier
Ola Sellin
MDH
Mats Björkman
Chalmers
Jan Bosch
MDH
Mikael Ekström
CNAM
Nicole Levy
MDH
Mikael Sjödin
Effective Change
Stig Larsson
MDH
Moris Behnamn
Ericsson
Diarmuid Corcoran
MDH
Radu Dobrin
Ericsson
Andreas Ermedahl
MDH
Rikard Lindell
Ericsson
Kristian Wiklund
MDH
Thomas Nolte
Ericsson
Magnus Schlyter
MDH
Wasif Afzal
Ericsson
Marcus Jägemar
MDH
Yue Lu
Etteplan
Henrik Jonsson
Motion Control
Jiaying Du
Etteplan
Karol Niechwiadowic
Rutgers Univ.
Tom Ostrand
Etteplan
Maria Signal
SICS
Markus Bohlin
Etteplan
Torbjörn Andersson
SICS
Sara Gestrelius
Hök Instruments
Bertil Hök
Volvo CE
David Rylander
Hök Instruments
Jonas Ljungblad
Volvo CE
Sara Dersten
ImaginationStudios
Daniel Kade
Volvo CE
Tomas Olsson
KKS
Mats Waltré
XDIN
Detlef Scholle
LEAX, MDH
Farhad Noruzi
XDIN
Mehrdad Saadatmand
MaximaTecc
Markus Wallmyr
Osijek Univ
Goran Martinovic
MaximaTecc
Mikael Åkerholm
MaximaTecc
Rikard Land
5
Management team
6
Board
The ITS-EASY Board consists of 3 industrial representatives (including the chairperson) + 2 reputed
scientists. The role of the board is to support the ITS-EASY leadership in the development of the
school, to give advice on strategic development, and to suggest corrective actions when needed.
7
Industrial Committee
The ITS-EASY Industrial Committee (IC) includes representatives for the participating companies
and acts as a forum for discussions regarding the planned and on-going activities in the ITS-EASY
research projects, deployments, and exploitation, as well as for providing opportunities for crosscompany contacts. The Committee organizes biannual meetings, discussing, e.g., the current
state of the project, or new ideas for integrated cooperation. IC is also responsible for providing
the companies annual reports that are merged in the ITS-EASY annual report.
MAXIMATECC
ADDIVA
Mikael Backström
CEO
8
ITS-EASY companies
Contact persons
PhD students
ABB
Lars Lindgren
Stefan U Svensson
ABB
Apala Ray
Daniel Hallmans
Gaetana Sapienza
Bombardier
Christer Persson
Bombardier
Mathias Ekman
Ericsson
Sigrid Eldh
Ericsson
Kristian Wiklund
Marcus Jägemar
Etteplan
Maria Signal
Etteplan
Henrik Jonsson
ImaginationStudios
Daniel Kade
Imagination Studios
Mikael Backström
MaximaTecc
Stefan Björnander
MaximaTecc
Ken Lindfors
SAAB
Göran Bertheau
SAAB
Kristina Forsberg
SICS
Kivanc Doganay
SICS
Björn Levin
Markus Bohlin
Volvo CE
David Rylander
Fredrik Ekstrand
Stephan Baumgart
Tomas Olsson
Volvo CE
Peter Wallin,
Jonas Larsson
XDIN
Mehrdad Saadatmand
XDIN
Barbro Claesson
9
ITS-EASY PhD students
10
11
12
13
Publications
Journals
1.
2.
Managing Timing Implications of Security Aspects in Model-Driven Development of Real-Time Embedded Systems,
Mehrdad Saadatmand, Thomas Leveque (Orange Labs, Meylan, France), Antonio Cicchetti, Mikael Sjödin, International
Journal On Advances in Security, vol 5, nr 3&4, December, 2012
A Formal Analysis Framework for AADL, Stefan Björnander, Cristina Seceleanu, Kristina Lundqvist, Paul Pettersson, The
Journal of Science and Technology, November, 2011
Conferences and workshops
2011
1.
2.
Resource Limited Hardware-based Stereo Matching for High-Speed Vision System , Fredrik Ekstrand, Carl Ahlberg,
Mikael Ekström, Lars Asplund, Giacomo Spampinato, Proceedings of the 5th International Conference on Automation,
Robotics and Applications (ICARA 2011), Wellington, December, 2011
GIMME - A General Image Multiview Manipulation Engine , Carl Ahlberg, Jörgen Lidholm, Fredrik Ekstrand, Giacomo
Spampinato, Mikael Ekström, Lars Asplund, Proceedings of the International Conference on ReConFigurable Computing
and FPGAs (ReConFig 2011), Cancun, November, 2011
2012
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Towards Accurate Monitoring of Extra-Functional Properties in Real-Time Embedded Systems, Mehrdad Saadatmand,
Mikael Sjödin, The 19th Asia-Pacific Software Engineering Conference (APSEC 2012), Hong Kong, December, 2012
Agile Practices in Regulated Railway Software Development, Henrik Jonsson, Stig Larsson (former), Sasikumar
Punnekkat, Software Reliability Engineering Workshops (ISSREW), 2012 , IEEE, Dallas, TX, USA, November, 2012
A Method to Formally Evaluate Safety Case Arguments against a System Architecture Model, Stefan Björnander, Rikard
Land (former), Patrick Graydon, Kristina Lundqvist, Philippa Comny (The University of York), 2nd edition of the IEEE
Workshop on Software Certification (WoSoCER2012), IEEE Computer Society, Dallas, Texas, U.S.A., November, 2012
Towards a Methodology for Hardware and Software Design Separation in Embedded Systems, Gaetana Sapienza, Ivica
Crnkovic, Tiberiu Seceleanu, In Proceedings of the Seventh International Conference on Software Engineering Advances
(ICSEA 2012), p 557-562, IARIA, Lisbon, Portugal, November, 2012
Case-Based Reasoning Supports Fault Diagnosis Using Sensor Information, Ning Xiong, Peter Funk, Tomas Olsson, The
2nd International Workshop and Congress on eMaintenance, Luleå, Editor(s): Uday Kumar, Ramin Karim, Aditya Parida, .
Phillip Tretten, November, 2012
Using Wireless Communication to Improve Road Safety and Quality of Service at Road Construction Work Sites (Poster),
David Rylander , Jakob Axelsson, IEEE Vehicular Networking Conference (VNC), p 152-156, IEEE, Seoul, Korea, November,
2012
Composing Textual Modelling Languages in Practice, Bart Mayers (Modelling, Simulation and Design Lab (MSDL),
University of Antwerp, Belgium), Antonio Cicchetti, Esther Guerra (Universidad Autónoma de Madrid (Spain)), Juan De
Lara (Universidad Autonoma de Madrid (Spain)), Procs. of the Intl. Workshop on Multi-Paradigm Modeling (MPM'12),
ACM/IEEE, Innsbruck (Austria), October, 2012
Monitoring Capabilities of Schedulers in Model-Driven Development of Real-Time Systems, Mehrdad Saadatmand, Mikael
Sjödin, Naveed Ul Mustafa (Master Student at KTH), 17th IEEE International Conference on Emerging Technologies &
Factory Automation (ETFA 2012), Krakow, Poland, September, 2012
Toward Model-Based Trade-off Analysis of Non-Functional Requirements, Mehrdad Saadatmand, Antonio Cicchetti,
Mikael Sjödin, 38th Euromicro Conference on Software Engineering and Advanced Applications(SEAA), Cesme-Izmir,
Turkey, September, 2012
Towards using the Graphics Processing Unit (GPU) for Embedded Systems, Daniel Hallmans, Mikael Åsberg, Thomas
Nolte, 17th IEEE International Conference on Emerging Technologies & Factory Automation (ETFA'12), Work-in-Progress
(WiP) session, Krakow, Poland, September, 2012
Towards Feedback-Based Generation of Hardware Characteristics, Marcus Jägemar, Sigrid Eldh, Andreas Ermedahl
(former), Björn Lisper, 7th International Workshop on Feedback Computing, San Jose, California, September, 2012
Bandwidth Measurement using Performance Counters for Predictable Multicore Software, Rafia Inam, Mikael Sjödin,
Marcus Jägemar, 17th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA'12), WiP,
p 1-4, IEEE, Krakow, Poland, September, 2012
Software Instrumentation of Safety Critical Embedded Systems - A Problem Statement, Mathias Ekman, Henrik Thane,
System, Software, SoC and Silicon Debug Conference IEEE S4D, 2012., Vienna, Austria., September, 2012
Towards Efficient Functional Safety Certification of Construction Machinery using a Component-based Approach,
Stephan Baumgart, Joakim Fröberg, Sasikumar Punnekkat, 34th International Conference on Software Engineering
(ICSE)- PLEASE Workshop, IEEE, Zurich, Switzerland, June, 2012
Case-based reasoning combined with statistics for diagnostics and prognosis, Tomas Olsson, Peter Funk, 25th
International Congress on Condition Monitoring and Diagnostic Engineering, p 1-9, IOPScience, Huddersfield, UK,
Editor(s):Andrew Ball, Rakesh Mishra, Fengshou Gu and Raj B K N Rao, June, 2012
Technical Debt in Test Automation, Kristian Wiklund, Sigrid Eldh, Daniel Sundmark, Kristina Lundqvist, TAIC PART 2012,
April, 2012
Utilization and Performance Considerations in Resource Optimized Stereo Matching for Real-Time Reconfigurable
Hardware, Fredrik Ekstrand, Carl Ahlberg, Mikael Ekström, Lars Asplund, Giacomo Spampinato, VISAPP 2012 International Conference on Computer Vision Theory and Applications, Rome, Italy, February, 2012
14
Conferences and workshops
2013
1.
Testing of Timing Properties in Real-Time Systems: Verifying Clock Constraints, Mehrdad Saadatmand, Mikael Sjödin,
20th Asia-Pacific Software Engineering Conference (APSEC), IEEE-CPS, Bangkok, Thailand, December, 2013
2.
A Solution for Industrial Device Commissioning along with the Initial Trust Establishment, Apala Ray, Johan Åkerberg,
Mikael Gidlund (external), Mats Björkman, 39th Annual Conference of the IEEE Industrial Electronics Society (IECON
2013), Vienna, Austria, November, 2013
3.
Run-Time Monitoring of Timing Constraints: A Survey of Methods and Tools, Nima Asadi (external), Mehrdad
Saadatmand, Mikael Sjödin, The Eighth International Conference on Software Engineering Advances (ICSEA 2013), Venice,
Italy, October, 2013
4.
A Method for Handling Evolvability in a Complex Embedded System, Daniel Hallmans, Thomas Nolte, Stig Larsson
(former), 18th IEEE International Conference on Emerging Technologies and Factory Automation (ETFA'13), Cagliari,
Italy, September, 2013
5.
Modelling for Hardware and Software Partitioning based on Multiple Properties, Gaetana Sapienza, Ivica Crnkovic,
Tiberiu Seceleanu, In Proceeding of the 39th Euromicro Conference Series on Software Engineering and Advanced
Applications, p 189-194, IEEE, September, 2013
6.
Synthesizing a Comprehensive Framework for Lean Software Development, Henrik Jonsson, Stig Larsson (former),
Sasikumar Punnekkat, 2013 39th Euromicro Conference Series, IEEE, Santander, Spain, September, 2013
7.
LEAN METHOD TO IDENTIFY IMPROVEMENTS FOR OPERATION CONTROL AT QUARRY SITES, David Rylander ,
Jakob Axelsson, 30th International Symposium of Automation and Robotics in Construction and Mining (ISARC 2013),
Montreal, Canada, August, 2013
8.
Towards Automatic Verification of Safety Properties in AADL System Models, Stefan Björnander, Patrick Graydon, Rikard
Land (former), Proceedings of the 31st International System Safety Conference (ISSC), System Safety Society, Boston, MA,
USA, August, 2013
9.
Industrial Requirements on Evolution of an Embedded System Architecture, Daniel Hallmans, Thomas Nolte, Stig Larsson
(former), 5th IEEE International Workshop on Industrial Experience in Embedded Systems Design (IEESD'13), Kyoto,
Japan, July, 2013
10. Reusability assessment of financial card readers’ security mechanisms in process control devices, Apala Ray, Johan
Åkerberg, Mikael Gidlund (external), Mats Björkman, Christophe Tremlet (external), 11th IEEE International Conference
on Industrial Informatics (INDIN 2013), Bochum, Germany, July, 2013
11. Partitioning Decision Process for Embedded Hardware and Software Deployment, Gaetana Sapienza, Ivica Crnkovic,
Tiberiu Seceleanu, In Proceeding of the 37th Annual Computer Software and Applications Conference Workshops, p 674680, IEEE, July, 2013
12. An Automated Round-trip Support Towards Deployment Assessment in Component-based Embedded Systems, Federico
Ciccozzi, Mehrdad Saadatmand, Antonio Cicchetti, Mikael Sjödin, 16th International Symposium on Component-Based
Software Engineering (CBSE) 2013, ACM, Vancouver (Canada), June, 2013
13. Impediments in Agile Software Development: An Empirical Investigation, Kristian Wiklund, Daniel Sundmark, Sigrid
Eldh, Kristina Lundqvist, 14th International Conference of Product Focused Software Development and Process
Improvement - PROFES, Springer, Paphos, Cyprus, June, 2013
14. MOS: An Integrated Model-based and Search-based Testing Tool for Function Block Diagrams, Eduard Paul Enoiu,
Kivanc Doganay, Markus Bohlin, Daniel Sundmark, Paul Pettersson, 35th International Conference on Software
Engineering (ICSE) - First International Workshop on Combining Modelling and Search-Based Software Engineering, IEEE
, San Francisco, May, 2013
15. Can we do useful industrial software engineering research in the shadow of Lean and Agile?, Kristian Wiklund, Sigrid
Eldh, Daniel Sundmark, Kristina Lundqvist, 35th International Conference on Software Engineering (ICSE) - First Intl.
Workshop on Conducting Empirical Studies in Industry (CESI), , IEEE, San Fransisco, May, 2013
16. Evaluating Machine Learning for Predicting Next-Day Hot Water Production of a Heat Pump, Tomas Olsson, 4th
International Conference on Power Engineering, Energy and Electrical Drives - IEEE POWERENG 2013, Istambul, Turkey,
May, 2013
17. On Combining Model-Based Analysis and Testing, Mehrdad Saadatmand, Mikael Sjödin, 10th International Conference on
Information Technology : New Generations (ITNG 2013), Las Vegas, Nevada, USA, April, 2013
18. Search Based Testing of Embedded Systems Implemented in IEC 61131-3: An Industrial Case Study, Kivanc Doganay,
Markus Bohlin, Ola Sellin, International Conference on Software Testing, Verification and Validation (ICST) - Search-Based
Software Testing (SBST), IEEE, Luxembourg, March, 2013
19. Initial Key Distribution for Industrial Wireless Sensor Networks, Apala Ray, Johan Åkerberg, Mats Björkman, Mikael
Gidlund (external), IEEE International Conference on Industrial Technology (ICIT 2013), Cape Town, South Africa,
February, 2013
20. An Immersive Motion Capture Environment, Daniel Kade, Oguzhan Özcan, Rikard Lindell, ICCGMAT 2013 International
Conference on Computer Games, Multimedia and Allied Technology, p 6, World Academy of Science, Engineering and
Technology, Zurich, January, 2013
MRTC reports
1.
EAST-ADL Tailored Testing: From System Models to Executable Test Cases, Raluca Marinescu, Mehrdad Saadatmand,
Alessio Bucaioni (external), Cristina Seceleanu, Paul Pettersson, MRTC report ISSN 1404-3041 ISRN MDH-MRTC278/2013-1-SE, Mälardalen Real-Time Research Centre, Mälardalen University, August, 2013
Feedback-Based Generation of Hardware Characteristics - Technical Report, Marcus Jägemar, Sigrid Eldh, Andreas Ermedahl
(former), Björn Lisper, MRTC report ISSN 1404-3041 ISRN MDH-MRTC-269/2012-1-SE, Mälardalen Real-Time Research
Centre, Mälardalen University, August, 2012
Technical reports
1.
Technical Report: Modelling for hardware and software deployment based on multiple properties selection, Gaetana
Sapienza, Ivica Crnkovic, Tiberiu Seceleanu, Technical Report, MDH, MRTC, February, 2013
15
Courses
The course curriculum of ITS-EASY includes courses in the following categories:
• Research methodology and professional/innovation-related courses. These courses provide
•
students with knowledge in research methodology, the purpose and goals of the research, the
professional and research ethical aspects, relation between research and development, and
finally utilisation of the research – innovation and technology transfer.
Research subject-related courses. These courses are either improvements of existing courses,
or new courses according to the research trends and activities at MDH, and needs of the
industrial partners and covering the ITS-EASY research directions.
It is expected that the PhD-students obtain between 75 and 90 credits (hp) in total during their
studies, according to the University requirements, which corresponds to up to one-and-a half year
of coursework. A list of the courses offered is presented in the table below.
Research methodology and professional courses
Research Planning, 4,5 hp (Mandatory)
Hans Hansson
Introduction to graduate education for new PhD students, 4,5 hp
Thomas Nolte & Emma Nehrenheim
Research methods in natural science and engineering 7,5 hp (Mandatory)
Gordana Dodig-Crnkovic
Professional ethics, 7,5 hp (Mandatory)
Gordana Dodig-Crnkovic
Research subject related courses
Distributed software development, 7,5 hp
Ivica Crnkovic
Industrial systems development, 7,5 hp
Antonio Cicchetti
Systems Thinking and its Application in Embedded Systems 7.5 hp
Harold “Bud” Lawson (external)
Project course in robotics, 15 hp
Giacomo Spampinato
Biomedical engineering, 7,5 hp
Maria Lindén
Advanced component-based software engineering, 7,5 hp
Ivica Crnkovic
Intelligent systems, 7,5 hp
Ning Xiong
Advanced software engineering, 7,5 hp
Frank Lüders
Advanced software verification and validation, 7,5 hp
Paul Pettersson
Safety critical systems engineering, 7,5 hp
Kristina Lundqvist
Industrial project course*, 15 hp
*mandatory for MDH employed ITS-EASY students
16
Possible / Future courses
Research methodology and professional courses
Course
Who
Empirical software engineering, 7,5 hp
Research and innovation, 7,5 hp
Intercultural competence in global engineering, 7,5 hp
Technology transfer, 7,5 hp (Mandatory)
Research subject related courses
Course
Who
Advances in embedded systems, 15 hp
Software and System Evolution, 7,5 hp
17
ITS-EASY+ companies
Contact persons
PhD students
Addiva
Dag Lindahl
Addiva
Melika Hozhabri
Bombardier
Christer Persson
Ola Sellin
Bombardier
Eduard Paul Enoiu
Ericsson
Sigrid Eldh
Hök Instrument
Bertil Hök
MaximaTecc
Ken Lindfors
Motion Control i
Västerås AB
Christer Gerdtman
SICS Swedish ICS
Björn Levin
Markus Bohlin
Ericsson
Diarmuid Corcoran
Hök Instrument
Jonas Ljungblad
MaximaTecc
Markus Wallmyr
Motion Control i Västerås AB
Jiaying Du
SICS Swedish ICS
Sara Gestrelius
Volvo CE
Sara Dersten
Volvo CE
Peter Wallin
Jonas Larsson
18
19
Eduard Paul Enoiu
20
21
22
23
24
25
Sara Gestrelius
26