TAMCO, INC. 03.01.2014 Price Manual

TAMCO, INC.
1466 Delberts Drive
Monongahela Pa 15063
(P) 800-826-2672
(P) 724-258-6622
(F) 724-258-6692
www.tamcotools.com
03.01.2014 Price Manual
Table of Contents
General Information and Terms of Sale
Air Tools - Paving Breakers
Air Tools - Clay Diggers and Trenchers
Air Tools - Rock Drills
Air Tools - Rivet Busters and Tampers
Air Tools - Chipping Hammers
Air Tools - American Made
Air Tools - Weld Flux and Needle Scalers
Air Tools - Rammers
Air Tools - Scabbler and Scabbler Accessories / Inline Oilers
Air Tool Accessories
Air Tool Accessories / Nail Stakes
Weld Flux Scaler Steel
Electric Demo Hammer Steel
Boom Mounted Demo Tools
Paving Breaker Steel
Paving Breaker Accessories
Chipping Hammer Steel
Rivet Buster Steel
Detachable Bit Hollow Drill Steel
Threaded Rock Bits
Carbide Tipped Hollow Drills
Seize-Free Carbide Hollow Drills
Hard Tip Drill Care and Safety Recommendations
Hand Tools
Maintenance Bars
Handled Tools
Replacement Handles
Steel Cross References
1-800-826-2672 P
www.tamcotools.com
2
3
4
5
6
7
8
9
10
11
12-13
14
15
16
17
18-19
20-21
22-23
24
25
26
27-28
29
29
30-31
32
33-34
34
35-40
724-258-6692 F
General Information and Terms of Sale
Terms of Sale
This price manual supercedes all other catalogs and/or price lists. All prices are subject to change without notice.
Shipping Terms
FOB: Shipping Point (unless noted otherwise at time of sale)
Minimum Invoice: $50.00 Net, this excludes freight and tax where applicable
Returned Goods: Tamco will not accept returns without prior authorization. All returns are subject to a 25% restocking fee.
No credit will be issued without proper documentation. All material must be returned in new condition.
Shortages and/or Damages
Never accept any shortaged or damaged shipments without making a notation on the bill of lading.
Tamco Inc., must be notified promptly of any shortages/damages or claims will not be considered.
Tamco Inc., cannot be held responsible for delivery delays due to strikes, fires, or other conditions outside of our control.
Our responsibility ceases when goods are received by freight carriers in new condition.
All published weights are approximate. Actual shipping weights may vary.
Credit Policy
1.
Tamco’s credit terms are 1% -10 days, Net 30 days. (This discount applies only to merchandise; all freight charges are due in
full.)
2. Repeated deviations or violation of our 30 day terms will result in an account being placed on credit hold and/or COD status.
3. Accounts with invoices unpaid beyond 60 days will be placed on credit hold and no further tools or parts will be sold until the
account is current (No invoices open beyond 30 days).
4. In the event collections are required, the customer is responsible for all costs of collection.
Pneumatic Tool Limited Warranty
Tamco Inc., warrants its pneumatic tools to be free of defects in materials and workmanship, to the original purchaser, for
a period of one year from the date of purchase. This warranty will not apply to any tool which Tamco Inc., deems to have
been abused, modified, misused, improperly maintained, inadequately lubricated, or repaired by anyone other than a
authorized Tamco repair house. Authorization to return any pneumatic tool for evaluation must be obtained from Tamco’s
customer service staff prior to return. All returns must be shipped prepaid to:
Tamco, Inc.
1466 Delberts Drive
Monongahela, PA 15063
No collect shipments will be accepted. Pneumatic tools shipped without authorization will be returned to the customer.
Tamco Inc., guarantees to repair or replace (at Tamco’s discretion) pneumatic tools at no charge to the original
purchaser if defects in materials or workmanship exist at the time of inspection. Tamco Inc., makes no other expressed
and/or implied warranty. Under no circumstances will Tamco Inc., be liable for damage to property or person, death,
consequential, incidental, indirect or special damages of any nature arising from the sale or use of pneumatic tools.
General Tool Warranty
Tamco Inc., products are guaranteed against defects and workmanship. Tamco Inc., cannot be responsible for failures due
to normal wear. Any product that has been modified, misused, abused, or suffered a lack of proper maintenance will not
be recognized for a warranty claim. Warranty consideration will be given to any product found to have defects in workmanship or materials at the time of inspection. No other warranty is expressed or implied. Never use a tool for a purpose
other than what is intended or designed for.
Safety Warnings and Cautions
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
2
11.
ALWAYS wear approved safety gear such as hearing protection, safety glasses, hard hats, and safety shoes when
using tools.
ALWAYS use the proper tool for the job. Do not use any tool other than the manner it was intended or designed for.
NEVER strike a tool designed for an air hammer with a hand held hammer.
NEVER use a pneumatic tool for prying. This can cause tool failure and/or operator injury.
NEVER use a dull or improperly maintained tool. Failure to properly maintain tools will lead to tool failure and/or
operator injury.
ALWAYS properly maintain air hammers. Worn parts, bushings, pistons, springs, etc can and will lead to premature
tool failure.
ALWAYS warm tools prior to use in freezing temperatures.
NEVER alter any tool in any way. This can cause tool failure and/or operator injury.
ALWAYS use a silicon carbide grinding wheel on dull tools or drills with carbide cutting edges. Drills should be
sharpened regularly after drilling 25 or more holes, depending on the hardness and abrasiveness of the material.
NEVER allow a pneumatic hammer to run idly. This practice allows undue stress to build in the tool and can lead to
premature tool failure and/or operator injury.
ALWAYS use tools in accordance with all OSHA and MSHA regulations.
Air Tools - Paving Breakers
Toku paving breakers offer a rugged and reliable tool for whatever task you may have for them. Toku breakers
are available in 30, 40, 60, and 90 pound classes. All Toku breakers feature a rugged four bolt back head,
drop forged alloy steel construction, forged latch retainers, replaceable chuck bushings, and safety triggers.
Optional mufflers are available.
Toku 30 and 40 pound hammers are the perfect size and weight for light to medium construction. These tools
work great for demolishing black top, masonry walls, bridge decks, or digging in frozen soil.
The Toku 60 and 90 pound class breakers are designed with larger demolition jobs in mind. Whether it’s
breaking rock, reinforced concrete, or pavement, these breakers have plenty of power to get the job done.
****Please note that hoses and fittings are not included.****
PB-60
PB-90
Shank Size
Piston Stroke
Piston Diameter
Impact Rate
Weight
Overall Length
Air Consumption
Air Inlet
Hose Size
PB-90
1-1/8” x 6”
1-1/4” x 6”
6” (152mm)
2-5/8” (66.67mm)
1,250 BPM
92.4 lbs (42 kg.)
28-1/2” (723mm)
77 CFM
3/4” NPT
3/4” (19mm)
1-800-826-2672 P
PB-40
PB-60
1-1/8” x 6”
1-1/4” x 6”
4” (100mm)
2-1/4” (57.15mm)
1,400 BPM
66 lbs. (30 kg.)
25-3/8” (645mm)
70 CFM
3/4” NPT
3/4” (19mm)
PB-30
PB-40
1” x 4-1/4”
5-3/4” (146mm)
1-3/4” (44mm)
1,100 BPM
39.6 lbs. (18 kg.)
26” (660mm)
56 CFM
1/2” NPT
3/4” (19mm)
www.tamcotools.com
PB-30
7/8” x 3-1/4”
1” x 4-1/4”
3-11/32” (85mm)
1-3/4” (44.45mm)
1,550 BPM
33 lbs. (15 kg.)
22-1/4” (564mm)
49 CFM
3/8” NPT
3/4” (19mm)
724-258-6692 F
3
Air Tools - Clay Diggers / Trenchers
When it comes to digging packed soil and clay from around forms, footers, or any other construction
area, you can be sure Tamco has a Toku digger to fit your needs. With three models to choose from,
you are sure to find the right tool for the job at hand. The CD-30 and CD-20 are D-handled tools that
offer maneuverability and strength in a compact package. The TD-30 offers the comfort and control of
a T-handle with the same power and performance as the CD-30.
Toku diggers and trenchers feature four bolt back heads, drop forged alloy steel construction, forged
latch retainers, replaceable chuck bushings, and safety triggers. Optional mufflers are available.
CD-30
TD-30
Shank Size
Piston Stroke
Piston Diameter
Impact Rate
Weight
Overall Length
Air Consumption
Air Inlet
Hose Size
4
TD-30
7/8” x 3-1/4”
1” x 4-1/4”
3-11/32” (85mm)
1-3/4” (44.45mm)
1,550 BPM
36 lbs. (16.3 kg.)
29” (736mm)
49 CFM
3/8” NPT
3/4” (19mm)
1-800-826-2672 P
CD-30
7/8” x 3-1/4”
1” x 4-1/4”
3-11/32” (85mm)
1-3/4” (44.45mm)
1,550 BPM
30 lbs. (13.6 kg.)
22” (559mm)
49 CFM
3/8” NPT
3/4” (19mm)
www.tamcotools.com
CD-20
CD-20
7/8” x 3-1/4”
2-3/8” (60mm)
1-11/16” (42.85mm)
2,000 BPM
22 lbs. (10 kg.)
20” (520mm)
38 CFM
1/2” NPT
3/4” (19mm)
724-258-6692 F
Air Tools - Rock Drills
We offer multiple rock drills for a wide variety of applications. Whether you are drilling through rock, concrete,
or brick, Tamco offers a rock drill that will fit your distinct requirements.
The Toku TS-55 rock drill has all the power needed for the biggest jobs. It features rugged construction and is
designed for larger diameter bits and deeper drilling jobs.
The Toku TJ-20 and TJ-15 are mid-sized rock drills that pack a big punch. These drills are great for road
building, shaft sinking, quarrying, as well as general demolition or construction work. Both models include
standard, removable in line oilers.
The Tamco CP9-A and Toku THD-1100N are lightweight drills that are able to get into smaller spaces other
drills cannot. These D-handled drills pack big power in a compact package. Recommended operation pressure
is 80 - 90 PSI. Exceeding 90 PSI may cause internal damage.
All rock drills feature replaceable chuck bushings, drop forged alloy steel construction, and forged latch
retainers. Mufflers are available for the TS-55, TJ-20, and TJ-15 models. TJ-20 and TJ-15 models include
Clear-View in line oilers.
Shank Size
Piston Stroke
Piston Diameter
Impact Rate
Speed
Weight
Overall Length
Air Consumption
Air Inlet
Hose Size
TS-55
TJ-20
TJ-15
THD-1100N
CP9-A
7/8” x 3-1/4”
7/8” x 4-1/4”
1” x 4-1/4”
2-9/16” (65mm)
2-5/8” (66.6mm)
1,800 BPM
200 RPM
59.4 lbs. (27 kg.)
22-3/8” (568mm)
91.81 CFM
3/4” NPT
3/4” (19mm)
7/8” x 3-1/4”
7/8” x 4-1/4”
7/8” x 3-1/4”
7/8” x 4-1/4”
7/8” x 3-1/4”
3/4” Round
Slotted
1-15/16” (49mm)
2-11/16” (68mm)
2,400 BPM
200 RPM
40.7 lbs. (18.5 kg.)
24-1/32” (610mm)
87.5 CFM
3/4” NPT
3/4” (19mm)
1-3/4” (45mm)
2-1/8” (54mm)
2,450 BPM
250 RPM
30.8 lbs. (14 kg.)
18-1/2” (468mm)
56 CFM
3/4” NPT
3/4” (19mm)
1-7/32” (31mm)
1-1/2” (38mm)
3,200 BPM
350 RPM
11.4 lbs. (5.2 kg.)
16-17/32” (420mm)
28.3 CFM
3/8” NPT
1/2” (12.7mm)
1-3/8”
1-1/4”
3,400 BPM
1-800-826-2672 P
www.tamcotools.com
8 lbs. (3.63 kgs.)
14-3/4”
20 CFM
3/8” NPT
1/2” (12.7mm)
724-258-6692 F
5
Air Tools - Rivet Busters / Tampers
Toku rivet busters are the ideal tool for any mid-sized demolition job you can throw at them. They
perform under the toughest conditions, whether you’re demolishing bridge decks, parking garages,
ripping tanks, cutting rivet heads, or any demolition work. These hard hitting tools simply perform.
The Toku line of rivet busters are available with goose-neck or D-handles, and are available for either
small buster or jumbo buster steel. All Toku rivet busters feature drop forged alloy handles, outside or
inside trigger designs, heat treated alloy cylinders, exhaust deflectors, and safety piston stoppers.
The Toku tamper is a rugged tool that comes with a steel tamping pad for compacting soil and
substrate material around foundations, trenches, poles and other compacting applications. Optimal
operating performance is achieved at 80 p.s.i. for this particular tool.
D-Handle
Upper/Lower Sleeves
Rubber Bumper and
Lock Spring
**See Page 14**
Shank Size
Piston Stroke
Piston Diameter
Impact Rate
Weight
Overall Length
Air Consumption
Air Inlet
Hose Size
RB-70
RB-70D (D Handle)
1-1/8” Shank
7-3/8” (250mm)
1-3/16” (27mm)
940 BPM
**28 lbs. (12.70)
19-3/4” (501.65mm)
37 CFM
3/8” NPT
1/2” (19mm)
RB-91HP
RB-91HPD (D Handle)
1-1/8” Shank
8-15/16” (227mm)
1-3/16” (30.2mm)
700 BPM
32 lbs. (14.3 kg.)
22-29/32” (582mm)
36.0 CFM
3/8” NPT
1/2” (19mm)
RB-110
RB-110D (D Handle)
1-1/8” Shank
11-15/16” (303mm)
1-3/16” (30.2mm)
680 BPM
35 lbs. (14.6 kg.)
26” (660mm)
32.9 CFM
3/8” NPT
1/2” (19mm)
TOKUJET-06
N/A
5-1/2” (140mm)
1-1/2”(38mm)
750 BPM
39.6 lbs. (18.0 kg.)
49”(1240mm)
35.2 C.F.M.
1/2” NPT
1/2” (12.7mm)
** D Handle - 30 lbs.
6
1-800-826-2672 P
www.tamcotools.com
724-258-6692 F
Air Tools - Chipping Hammers
Toku’s rugged TCH series of “D-handle” chipping hammers are available in 2” through 4” stroke lengths. All
TCH series chipping hammers feature drop forged handles, replaceable bushings, heat treated alloy cylinders,
and exhaust deflectors. The TCH line of hammers features a rock solid four bolt handle for maximum reliability
and durability which allows a sure grip in all conditions. The TCH series is designed to only operate when the
chisel is in contact with the work surface to avoid excessive wear caused by dry firing.
Toku’s AA-0S chipping hammer
proves bigger is not always
better. It’s lightweight and
compact size allows for greater
flexibility when working in tight
spaces or small enclosures.
The AA-0S is small on size but
big on power.
AA-OS
Shank Size
Piston Stroke
Piston Diameter
Impact Rate
Weight
Overall Length
Air Consumption
Air Inlet
Hose Size
TCH-2
TCH-3
TCH-4
.680” Round Shank or .580” Hex Shank with Round or Oval Collar (Please Specify)
1-13/16” (45mm)
2” (50.8mm)
2-1/2” (63.5mm)
4” (101.6mm)
7/8” (22.2mm)
1-1/8” (28.54mm)
1-1/8” (28.54mm)
1-1/8” (28.54mm)
3,000 - 3,200 BPM
2,600 - 2,800 BPM
2,000 - 2,200 BPM
1,600 - 1,800 BPM
7.9 lbs. (3.6 kg.)
18 lbs. (8.1 kg.)
19 lbs. (8.55 kg.)
20 lbs. (9 kg.)
12-3/4” (374.65mm)
14-3/4” (374.65mm)
16” (406.4mm)
17” (431.79mm)
22.95 CFM
29.75 CFM
31.5 CFM
33.25 CFM
3/8” NPT
7/8” x 24 Thrds/In NPT 7/8” x 24 Thrds/In NPT 7/8” x 24 Thrds/In NPT
1/2” (12.7mm)
1/2” (12.7mm)
1/2” (12.7mm)
1/2” (12.7mm)
Toku’s THA series of gooseneck chipping hammers are available in 1” through 4” stroke lengths. The THA
series utilizes a saw tooth connection between the handle and cylinder which provides a more
e secure,
positive fit.
The Toku THA series
chipping hammers feature
alloy steel drop forged
handles, replaceable
bushings, heat treated
alloy cylinders, reliable ring
valve design, and exhaust
deflectors. Optional quick
connect retainers are
available for all models.
THA-1B
Shank Size
Piston Stroke
Piston Diameter
Impact Rate
Weight
Overall Length
Air Consumption
Air Inlet
Hose Size
THA-2B
THA-3B
THA-4B
.680” Round Shank or .580” Hex Shank with Round or Oval Collar (Please Specify)
1” (25.4mm)
2-3/32” (51mm)
2-17/32” (64mm)
4-1/32” (102mm)
1-1/8” (28.54mm)
1-1/8” (28.54mm)
1-1/8” (28.54mm)
1-1/8” (28.54mm)
2,500 BPM
2,300 BPM
2,200 BPM
1,800 BPM
14.8 lbs. (5.9 kg.)
15.8 lbs. (6.2 kg.)
16.5 lbs. (6.8 kg.)
18.25 lbs. (7 kg.)
15-9/32” (388mm)
16-1/4” (413mm)
17-23/32” (450mm)
18-29/32” (480mm)
28 CFM
29.75 CFM
31.8 CFM
33.25 CFM
3/8” NPT
3/8” NPT
3/8” NPT
3/8” NPT
1/2” (12.7mm)
1/2” (12.7mm)
1/2” (12.7mm)
1/2” (12.7mm)
1-800-826-2672 P
www.tamcotools.com
724-258-6692 F
7
Air Tools - American Made
If an American made air tool is required for your job, this is your tool. Tamco rivet busters are
manufactured domestically and are a great addition to your tool needs. These tools are
manufactured by American craftsmen and manufactured using high quality U.S. made components.
The Tamco brand of rivet buster will perform tasks such as bridge-deck repair, vertical and / or
horizontal concrete demolition, busting rivets and bolts, and for use on underground tanks.
Try the CP-4181 model for the really tough job.
Upper/Lower Sleeves
Rubber Bumper and
Lock Spring
**See Page 14**
Shank Size
Bore
Stroke
Impact Rate
Length
Weight
Air Inlet
Air Consumption
Hose Size
8
RB-133
RB-1133
RB90 / RB91
CP-4181
1-1/8”
1-3/16”
8”
960 BPM
22”
30 lbs.
3/8”
44 C.F.M.
1/2”
1-1/8”
1-3/16”
11”
850 BPM
25”
34 lbs.
3/8”
39 C.F.M.
1/2”
1” / 1-1/8”
1-1/16” (27mm)
9-27/32” (250mm)
900 BPM
21-1/16” / 20-92/32
28 lbs.
3/8”
27.9 C.F.M.
1/2”
1-1/8”
1-3/16”
11”
720 BPM
26”
34.5 lbs.
3/8”
39 C.F.M.
1/2”
1-800-826-2672 P
www.tamcotools.com
724-258-6692 F
Air Tools - Weld Flux / Needle Scalers
The SF-A1L1 and SF-A1L2 weld flux and needle scalers utilize Cleco style steel and are available
with standard throttles, push type throttles, or solid backhead type.
The SF-A182 series of weld flux and needle scalers use Ingersoll-Rand style steel and are available
with standard throttle, solid backhead, or pistol grip styles.
Our line of weld flux and needle scalers use advanced materials for greater longevity and weight
reduction. Tools convert from needle scaler to weld flux scaler quickly and easily.
We also offer an imported version of the Cleco weld flux and needle scaler, as well as replacement
parts and needles for all of the tools.
Bore
Stroke
Impact Rate
Length
Weight
Air Inlet
Air Consumption
SF-A1L1
SF-A1L2
SF-A182NS
SF-A182WF
1”
1-1/8”
4,600 B.P.M.
17”
6.25 lbs.
1/4”
12 C.F.M.
1”
1-1/8”
4,600 B.P.M.
10”
4.20 lbs.
1/4”
12 C.F.M.
15/16”
1-1/16”
4,000 B.P.M.
18”
6.00 lbs.
1/4”
13 C.F.M.
15/16”
1-1/16”
4,000 B.P.M.
9”
4.00 lbs.
1/4”
13 C.F.M.
1-800-826-2672 P
www.tamcotools.com
724-258-6692 F
9
Air Tools - Rammers
Tamco offers a variety of rammers for the job site, foundry, or mill. All tools feature heat treated alloy
steel cylinders, innovative features and rugged construction. Tamco has the ideal tool for any of your
compaction needs.
These rugged and reliable tools will provide years of service on any job site.
Optional steel or rubber heads are available for all Tamco rammers.
Bore
Stroke
Taper/Diameter
Impact Rate
Length
Weight
Air Inlet
Butt Diameter
10
SF-1BA
1”
4”
0.802”
1,240 B.P.M.
20-1/4”
10 lbs.
3/8”
2-1/2”
1-800-826-2672 P
SF-2BAR
1”
2-1/2”
0.802”/.687”
1,725 B.P.M.
15-1/4”
7.125 lbs.
3/8”
2-1/2”
SF-OBR
1”
2”
0.802”/.645”
2,500 B.P.M.
16-1/2”
6.65 lbs.
1/4”
2-1/2”
www.tamcotools.com
SF-00BA
11/16”
2”
S Taper/.460”
1,600 B.P.M.
11-3/4”
3.75 lbs.
3/8”
1-3/4”
724-258-6692 F
Scabbler and Inline Oilers
Tamco offers a Triple-piston Scabbler for use in roughing up concrete and steel surfaces. The three
piston action will help remove a variety of unwanted surface debris for a variety of applications,
including paint and rust removal.
SF-T3
Triple Piston Scabblerbl
Bore
Stroke
Impact Rate
Height
1”
13/16”
5,200 B.P.M.
5-7/8”
Length
Weight
Air Inlet Thread
Air Consumption
11”
8.25 lbs.
3/8”
15 C.F.M.
Triple Piston Scabbler Accessories
Part Number
Description
Price
SF-00146
SF-00146C
SF-00146REX
Steel Piston
Carbide Piston
Rexalloy Piston - Spark Resistant
$54.00
$115.89
$309.45
In-Line Oilers
Description
Part
Number
TAM-0L
TAM-1L
TAM-2L
TAM-3L
430101V0J
In-Line Oiler 1.4 Fluid Oz.
In-Line Oiler 3.7 Fluid Oz.
In-Line Oiler 11.0 Fluid Oz.
In-Line Oiler 16.0 Fluid Oz.
L0-15 Clearview In-Line Oiler 6.0 Fluid Oz.
1-800-826-2672 P
Price
$69.78
$72.35
$88.45
$117.01
$199.30
www.tamcotools.com
724-258-6692 F
11
Air Tool Accessories
Toku Whip Hoses
Part Number
Description
TAM-WH5-3/8
TAM-WH5-7/8
TAM-WH10-3/8
TAM-WH10-1/2
TAM-WH10-7/8
TAM-AH50
5 foot Whip Hose - 3/8” NPT Swivel End, rated 250 PSI
5 foot Whip Hose - 7/8” x 24” Thread/In Swivel End, rated 250 PSI
10 foot Whip Hose - 3/8” NPT Thread/In Swivel End, rated 250 PSI
10 foot Whip Hose - 1/2” NPT Swivel End, rated 250 PSI
10 foot Whip Hose - 7/8” X 24” Thread/In Swivel End, rated 250 PSI
50 foot Air Hose - 3/4” Hose w/Universal Fitttings, rated 250 PSI
Net Price
$34.95
$27.95
$38.95
$33.50
$33.50
$40.75
Whip Checks
Part Number
TAM-WA2
TAM-WB1
Description
List Price
Safety Cable - 1/4” x 38” - Fits hose sizes 1-1/2” to 3”
Safety Cable - 1/8” x 20” - Fits hose sizes 1/2” to 1-1/4”
$16.43
$8.87
Assembled
Part Numbers
include:
131501017 /
..........131501016
410241550
130801043
410241560
Part Numbers
include:
410241610
131303048
136301010R
410241650
130801042
410241620
134601019
(Side Rod Kit) SRKIT-60 OR SRKIT-90
Description
Front Head Bolt for 90lb Paving Breaker / for 60 lb
Paving Breaker
Front Head Bolt Nut
Front Head Bolt Spring
Front Head Bolt Lock Washer
(Latch Kit) LKIT-60/90
Description
Steel Retainer Latch
Washer
Bushing
Plunger
Spring
Bolt
Nut
List
Price
$72.25
List Price
$94.30
Other model parts are available and in stock. Call for pricing!
12
1-800-826-2672 P
www.tamcotools.com
724-258-6692 F
Air Tool Accessories
Mufflers
Part Number
41027187C
41024187C
41023187C
41020187C
430101Y1C
Description
Muffler for a PB 90
Muffler for a PB 60
Muffler for a PB 40
Muffler for a PB 30
Muffler for a TJ-15
List Price
$272.34
$215.07
$186.35
$186.35
$134.15
Accessories
Part Number
Y10212300
SF-01038
SF-01040
SF-01060
SF-UF37
SF-UM37
SF-UF50
SF-UM50
SF-UF75
SF-UM75
Description
List Price
Retainer Spring (Fits Toku THH, THA, TCH, and AA-0S Series Chippers)
3/8” NPT x 1/2” Hose Barb Swivel Assembly
7/8” x 24 Threads/In x 1/2” Hose Barb Swivel Assembly
1/2” NPT x 1/2” Hose Barb Swivel Assembly
3/8” Female Universal Chicago Fitting
3/8” Male Universal Chicago Fitting
1/2” Female Universal Chicago Fitting
1/2” Male Universal Chicago Fitting
3/4” Female Universal Chicago Fitting
3/4” Male Universal Chicago Fitting
$1.50
$29.82
$19.75
$19.75
$9.51
$8.85
$8.13
$7.70
$8.90
$8.25
Retainers
Part Number
T25119002
T25119000R
T25129103
Y10298230
Y10298230R
Description
List Price
Oval Retainer - Solid Type (Fits Toku THA, THH, and TCH Series Chippers)
Round Retainer - Solid Type (Fits Toku THA, THH, and TCH Series Chippers)
Deluxe Quick Change Retainer (Fits Toku THA, THH, and TCH Series Chippers)
Oval Retainer - Solid Type (Fits Toku AA-0S Series Chippers)
Round Retainer - Solid Type (Fits Toku AA-0S Series Chippers)
1-800-826-2672 P
www.tamcotools.com
$49.41
$49.41
$121.11
$87.41
$87.41
724-258-6692 F
13
Air Tool Accessories / Nail Stakes
Poly or black rubber
Bumpers
(Assembled
with steel)
Part
Number
Rivet Buster Accessories
Description
List Price
T33210100
T33210300
T33210300S
T33210400
T33210400PJR
T33219400
Jumbo Buster Upper Sleeves
Jumbo Buster Lower Sleeves
Jumbo Buster Lower Sleeves (Split)
Jumbo Buster Rubber Bumper
Jumbo Buster Poly Red Bumper
Jumbo Buster Lock Spring
$12.00
$14.95
$17.50
$3.00
$5.30
$2.30
Lock Spring
Upper Sleeve and Lower Sleeve
Nail Stakes With Holes
Part Number
Size
Carton/Pallet
Quantity
STAKE3418
STAKE3424
STAKE3430
STAKE3436
STAKE3448
STAKE7818
STAKE7824
STAKE7830
STAKE7836
3/4” X 18”
3/4” X 24”
3/4” X 30”
3/4” X 36”
3/4” X 48”
7/8” X 18”
7/8” X 24”
7/8” X 30”
7/8” X 36”
10 PER CARTON
10 PER CARTON
10 PER CARTON
10 PER CARTON
10 PER CARTON
10 PER CARTON
10 PER CARTON
10 PER CARTON
10 PER CARTON
60 / PAL
50 / PAL
30 / PAL
30 / PAL
N/A
50 / PAL
40 / PAL
25 / PAL
25 / PAL
List
Price
$15.75
$21.00
$26.25
$31.50
$49.50
$25.25
$32.00
$37.75
$45.00
***This item is sold in carton quantities only.***
Stakes are completely boxed. They are also manufactured from high carbon
material to assure easy driving, and long life.
Also available in solid style (without holes).
These Nail Stakes are American made!
14
1-800-826-2672 P
www.tamcotools.com
724-258-6692 F
Weld Flux / Scaler Steel
Cleco Style Shank
Description
1-3/8” Std. Wide Scaler
2” Wide Scaler
3” Wide Scaler
3/4” Wide Narrow Scaler
1-3/8” Wide Spoon Scaler
Bull / Moil Point
7” Part
Number
1851-007
1807-007
1842-007
1853-007
1854-007
1811-007
Wt.
0.50
0.50
0.50
0.50
0.50
0.50
List
Price
$9.00
$20.70
$25.20
$8.40
$9.00
$10.35
12” Part
Number
1851-012
1807-012
1842-012
1853-012
1854-012
1811-012
Wt.
0.75
0.75
1.00
0.75
0.75
0.75
List
Price
$11.30
$23.75
$27.70
$10.50
$11.30
$12.65
18” Part
Number
1851-018
1807-018
1842-018
1853-018
1854-018
1811-018
List
Price
$11.30
$23.75
$27.70
$10.50
$11.30
$12.65
18” Part
Number
2051-018
2007-018
2042-018
2053-018
2054-018
2011-018
Wt.
1.25
1.50
1.50
1.25
1.25
1.25
List
Price
$13.65
$37.85
$41.85
$13.05
$13.65
$15.15
Ingersoll-Rand Style Shank
Description
1-3/8” Std. Wide Scaler
2” Wide Scaler
3” Wide Scaler
3/4” Wide Narrow Scaler
1-3/8” Wide Spoon Scaler
Bull / Moil Point
7” Part
Number
2051-007
2007-007
2042-007
2053-007
2054-007
2011-007
Wt.
0.50
0.50
0.50
0.75
0.50
0.50
List
Price
$9.00
$20.70
$25.20
$8.40
$9.00
$10.35
12” Part
Number
2051-012
2007-012
2042-012
2053-012
2054-012
2011-012
Wt.
0.75
1.00
1.00
0.75
0.75
0.75
Wt.
1.25
1.50
1.40
1.25
1.25
1.25
List
Price
$13.35
$37.85
$41.85
$13.05
$13.65
$15.15
Chicago Pneumatic Style Shank
Description
1-3/8” Std. Wide Scaler
2” Wide Scaler
3” Wide Scaler
3/4” Wide Narrow Scaler
1-3/8” Wide Spoon Scaler
7” Part
Number
2151-007
2107-007
2142-007
2153-007
2154-007
Wt.
0.50
0.50
0.75
0.50
0.50
List
Price
$9.00
$20.70
$25.20
$8.40
$9.00
12” Part
Number
2151-012
2107-012
2142-012
2153-012
2154-012
Wt.
0.75
1.00
1.00
0.75
0.75
List
Price
$11.30
$23.75
$27.70
$10.50
$11.30
18” Part
Number
2151-018
2107-018
2142-018
2153-018
2154-018
Wt.
1.25
1.50
1.50
1.25
1.25
List
Price
$13.65
$37.85
$41.85
$13.05
$13.65
.401 Parker Taper Style Shank
Point Style
Flat 1/2” Wide Chisel
Offset 1/2” Flat Chisel
Sidecut 1/2” Chisel
Wide Flat 1-1/4” Blade
Bull/Moil Point
Flat 3/4” Chisel
1-800-826-2672 P
7” Part
Number
2201-007
2202-007
2203-007
2205-007
2211-007
2253-007
List
Price
$11.35
$11.90
$11.35
$14.55
$11.35
$11.35
12” Part
Number
2201-012
2202-012
2203-012
2205-012
2211-012
2253-012
List
Price
$13.95
$14.60
$13.95
$17.20
$13.95
$13.95
18” Part
Number
2201-018
2202-018
2203-018
2205-018
2211-018
2253-018
www.tamcotools.com
List
Price
$23.10
$23.75
$23.10
$26.25
$23.10
$23.10
24” Part
Number
2201-024
List
Price
$32.10
2205-024
$35.25
2253-024
$32.10
724-258-6692 F
15
Electric Demo Hammer Steel
Part Number
Description
Lgth.
Wt.
Box Qty.
List Price
This tool fits: Bosch 11202, 11203, 11204, 11205, 11209, 11214, 11306, & 11310; AEG PHD26, PH38, & PHA38; Black & Decker 5041, 5042, 5043,
5044, & 5016K; Hitachi DH3YA, DH38YE, DH38YF, DH50SB, & H45SB; Kango 5015, 637S, 638S, 950S; Makita HR 3851; Matebo RH66, RH99, &
1129; Milwaukee 5343, 5347, & 5348; Ramset 442, 445, & 475; Red-Head 747-2; Ryobi ED382 & ER382; Wacker EHB7S
Spline Drive
44-01811T
44-01812T
44-01813T
44-01814T
44-01817T
44-01819T
44-01810T
44-01818T
44-01809T
44-01822T
44-01824T
Chisel 1” Blade
Chisel 1” Blade
Moil Point
Moil Point
Scaling Chisel 2” Blade
Scaling Chisel 2” Blade
Scaling Chisel 3” Blade
Bushing Tool (Shank Only)
Bushing Tool (1 Pc.)
Clay Spade
Ground Rod Driver
12”
18”
12”
18”
12”
18”
12”
7”
10”
18”
12”
1.50
2.25
1.50
2.25
1.75
2.50
2.25
1.00
2.75
4.50
3.00
25
25
25
25
25
25
25
25
15
5
10
Part Number
Description
Lgth.
Wt.
Box Qty.
$11.15
$12.95
$11.15
$12.95
$21.65
$24.95
$28.40
$13.70
$59.25
$67.90
$93.10
List Price
This tool fits: Black & Decker 5021K; Bosch 11302, 11303, & 11305; Milwaukee 5355; Hitachi H55SC; Dewalt 551 & 558; and Kango 900S
3/4” Hex
44-01517T
44-01518T
44-01515T
44-01516T
44-01529T
44-01503T
44-01508T
44-01520T
44-01504T
44-01524T
44-01506T
Chisel 1” Blade
Chisel 1” Blade
Moil Point
Moil Point
Scaling Chisel 2” Blade
Scaling Chisel 3” Blade
Bushing Tool (Shank Only)
Bushing Tool (1 Pc.)
Clay Spade
Ground Rod Driver
Asphalt Cutter
12”
18”
12”
18”
12”
12”
7”
10”
18”
12”
18”
1.50
2.25
1.50
2.25
1.75
2.25
1.00
2.75
4.50
3.00
4.50
25
25
25
25
25
25
25
15
5
10
5
Part Number
Description
Lgth.
Wt.
Box Qty.
44-02161T
44-02163T
44-02164T
44-02167T
44-02169T
Moil Point
Narrow Chisel
Chisel 3” Blade
Asphalt Cutter 5” Blade
Clay Spade
21-1/2”
21-1/2”
16”
20”
20”
6.00
6.00
6.75
8.50
9.75
8
8
8
5
8
Part Number
Description
Lgth.
Wt.
Box Qty.
$11.75
$14.20
$11.75
$14.20
$21.15
$30.10
$13.70
$57.45
$66.15
$91.95
$78.15
List Price
This tool fits: Bosch 11304
1-1/8” Electric
$27.05
$27.05
$46.00
$91.45
$92.20
List Price
This tool fits: Hilti TE54, RE55, 705, TE74, TE75, TE76 ATC, TE504, TE505, & TE704; Bosch 11227E, 11230EVS, 11231EVS, 11313EVS, 11311EVS,
11312E, 11214E, 11214EVS, 11216EVS, & 11309EVS; SDS Max T-19; Wacker EHB75M
SDS Max
16
1-800-826-2672 P
44-01911T
44-01912T
44-01913T
44-01914T
44-01917T
44-01910T
44-01908T
44-01909T
Chisel 1” Blade
Chisel 1” Blade
Moil Point
Moil Point
Scaling Chisel 2” Blade
Scaling Chisel 3” Blade
Detachable Shank
Bushing Tool (16 Teeth)
12”
18”
12”
18”
12”
12”
12”
10”
www.tamcotools.com
1.25
1.75
1.25
1.75
1.25
1.50
1.00
2.75
25
25
25
25
25
25
25
15
$13.70
$17.75
$13.70
$17.75
$25.80
$28.45
$30.70
$59.25
724-258-6692 F
Boom Mounted Demo Steel
1.) MOIL POINT
2.) CROSS CUT CHISEL
3.) INLINE CHISEL
4.) WIDE CROSS CUT CHISEL
5.) WIDE INLINE CHISEL
6.) BLUNT
We offer a line of Boom Mounted
Demo Tools for these manufacturers:
Allied
Bobcat / Melroe
Kent
Indeco
NPK
Stanley
BTI / Teledyne / Toku
JCB
1-800-826-2672 P
Atlas Copco
Caterpillar
Husky / IPC
Okada
Rammer
Tramac
Magnum
Soosan
We are currently stock these
brands:
Allied
Bobcat
CP
Husky / IPC
Okada
Tramac
Magnum
www.tamcotools.com
Atlas Copco
Caterpillar
Kent
Indeco
NPK
Toku/Striker
724-258-6692 F
17
Paving Breaker Steel
Moil Points and
Narrow Chisels
**Longer lenghts
available**
Heavy Duty Moil Points
and Narrow Chisels
18
1-800-826-2672 P
Narrow
Chisel
Moil Point
4001-014
4001-018
4001-024
4001-036
4001-048
4001-060
4001-072
4001-084
4001-096
4001-014X
4001-018X
4002-014
4002-018
4002-024
4002-036
4002-048
4002-060
4002-072
4002-084
4002-096
4003-014
4003-018
4003-024
4003-036
4003-048
4003-060
4003-072
4003-084
4003-096
4004-014
4004-018
4004-024
4004-036
4004-048
4004-060
4004-072
4004-084
4004-096
4011-014
4011-018
4011-024
4011-036
4011-048
4011-060
4011-072
4011-084
4011-096
4011-014X
4011-018X
4012-014
4012-018
4012-024
4012-036
4012-048
4012-060
4012-072
4012-084
4012-096
4013-014
4013-018
4013-024
4013-036
4013-048
4013-060
4013-072
4013-084
4013-096
4014-014
4014-018
4014-024
4014-036
4014-048
4014-060
4014-072
4014-084
4014-096
Narrow
Moil Point
Chisel
4001-014H
4001-018H
4002-014H
4002-018H
4003-014H
4003-018H
4004-014H
4004-018H
4011-014H
4011-018H
4012-014H
4012-018H
4013-014H
4013-018H
4014-014H
4014-018H
Shank Size Lgth UC
7/8” x 3-1/4”
7/8” x 4-1/4”
1” x 4-1/4”
1-1/8” x 6”
1-1/4” x 6”
Shank Size
7/8” x 3-1/4”
1” x 4-1/4”
1-1/8” x 6”
1-1/4” x 6”
Wt.
Box Qty
List Price
14”
18”
24”
36”
48”
60”
72”
84”
96”
14”
18”
14”
18”
24”
36”
48”
60”
72”
84”
96”
14”
18”
24”
36”
48”
60”
72”
84”
96”
14”
18”
24”
36”
48”
60”
72”
84”
96”
3.25
4.00
5.25
7.50
9.75
12.00
14.25
16.50
18.00
3.50
4.25
4.50
5.50
6.75
10.00
13.00
15.75
18.75
21.75
24.50
6.00
7.25
9.50
13.25
17.00
20.50
24.00
28.00
31.75
7.50
9.00
11.25
15.75
20.50
25.00
29.50
34.00
38.75
12
12
$21.80
$23.80
$29.40
$42.60
$55.75
$69.00
$82.15
$95.35
$108.50
$24.70
$26.65
$23.15
$26.20
$30.15
$45.05
$59.95
$74.85
$89.80
$104.65
$119.60
$26.20
$29.30
$34.35
$53.10
$71.85
$90.60
$109.35
$128.10
$146.85
$30.15
$32.85
$38.55
$65.50
$92.45
$119.45
$146.35
$173.30
$200.25
Lgth
UC
14”
18”
14”
18”
14”
18”
14”
18”
Wt.
www.tamcotools.com
3.75
4.50
5.25
6.25
6.75
8.25
8.00
9.75
12
10
8
7
8
7
Box
Qty
List Price
$33.90
$38.50
$31.55
$35.70
$35.75
$41.60
$41.60
$49.75
724-258-6692 F
Paving Breaker Steel
Part Number
3” Wide Chisels
** Longer lengths available **
Heavy Duty 3” Wide Chisels
1-800-826-2672 P
4021-014
4021-018
4021-024
4021-036
4021-048
4021-060
4021-072
4021-096
4021-014X
4021-018X
4022-014
4022-018
4022-024
4022-036
4022-048
4022-060
4022-072
4022-084
4022-096
4023-014
4023-018
4023-024
4023-036
4023-048
4023-060
4023-072
4023-084
4023-096
4024-014
4024-018
4024-024
4024-036
4024-048
4024-060
4024-072
4024-084
4024-096
Length
UC
14”
18”
24”
36”
7/8” x 3-1/4”
48”
60”
72”
96”
14”
7/8” x 4-1/4”
18”
14”
18”
24”
36”
48”
1” x 4-1/4”
60”
72”
84”
96”
14”
18”
24”
36”
48”
1-1/8” x 6”
60”
72”
84”
96”
14”
18”
24”
36”
1-1/4” x 6”
48”
60”
72”
84”
96”
3.25
4.00
5.50
8.00
10.00
12.25
14.00
18.25
3.50
4.25
4.50
5.50
7.50
10.00
12.75
16.50
19.25
22.00
24.00
6.00
7.25
9.75
13.50
17.25
21.00
24.75
28.50
32.00
7.50
9.00
12.25
16.75
21.25
26.00
30.00
35.00
39.50
Part Number
Shank Size Lth UC
Wt.
4021-014H
4021-018H
4022-014H
4022-018H
4023-014H
4023-018H
4024-014H
4024-018H
Shank
Size
7/8” x 3-1/4”
1” x 4-1/4”
1-1/8” x 6”
1-1/4” x 6”
14”
18”
14”
18”
14”
18”
14”
18”
www.tamcotools.com
Wt.
5.00
6.00
5.25
6.25
7.00
8.25
8.50
10.25
Box
Qty
12
12
12
10
8
7
8
6
Box
Qty
List Price
$30.15
$32.85
$39.45
$62.95
$86.45
$109.95
$133.50
$180.45
$32.95
$35.75
$30.75
$35.60
$41.90
$68.85
$95.75
$122.75
$149.70
$176.65
$203.55
$34.35
$36.75
$45.55
$76.55
$107.45
$138.45
$169.40
$200.35
$231.30
$37.75
$42.05
$50.00
$87.75
$125.40
$163.10
$200.90
$238.60
$276.30
List Price
$44.80
$48.70
$43.75
$49.60
$49.60
$54.50
$54.60
$62.25
724-258-6692 F
19
Paving Breaker Accessories
Asphalt Cutters
Clay Spades
Frost Wedges
Bushing Tools
Shank Size
4061-012
4061-012X
4062-012
4063-012
4064-012
7/8” x 3-1/4”
7/8” x 4-1/4”
1” x 4-1/4”
1-1/8” x 6”
1-1/4” x 6”
Blade Size
Wt.
5” x 6”
6.75
7.00
7.25
8.50
9.25
Part Number
4111-016
4111-016X
4102-016
4103-016
4104-016
4102-916
4103-916
4104-916
Shank Size
7/8” x 3-1/4”
7/8” x 4-1/4”
1” x 4-1/4”
1-1/8” x 6”
1-1/4” x 6”
1” x 4-1/4”
1-1/8” x 6”
1-1/4” x 6”
Part Number
4081-017
4081-017X
4082-017
4083-017
4084-017
Part Number
4131-012
4132-009
4133-009
4134-009
Box Qty
$76.00
$76.00
$83.95
$77.95
$79.90
5
5
5
Blade Size
List Price
Wt.
7.00
7.25
7.25
8.50
11.00
7.00
8.00
10.50
List Price
$105.30
$107.50
$105.30
$111.95
$117.80
$107.50
$114.15
$121.00
Shank Size Length UC
7/8” x 3-1/4”
7/8” x 4-1/4”
1” x 4-1/4”
16-1/2”
1-1/8” x 6”
1-1/4” x 6”
Wt.
7.00
7.25
10.00
13.00
18.00
List Price
$99.75
$99.75
$98.25
$102.15
$105.90
Shank Size Length UC
7/8” x 3-1/4”
1” x 4-1/4”
12”
1-1/8” x 6”
1-1/4” x 6”
Wt.
5.00
6.50
7.00
7.25
List Price
$108.55
$96.55
$99.55
$104.30
5-1/2”
4-1/2”
Combo Cutters
Part Number
4063-011.5
4064-011.5
Shank Size Length UC
1-1/8” x 6”
11-1/2”
1-1/4” x 6”
Wt.
8.05
8.65
List Price
$87.45
$90.05
Super-Kut Chisels
Part Number
4043-016
4044-016
Shank Size Length UC
1-1/8” x 6”
16”
1-1/4” x 6”
Wt.
8.00
9.25
List Price
$57.05
$64.20
Concrete Busters
20
Part Number
1-800-826-2672 P
Part Number
4096-014
4097-014
Shank Size
1-1/8” x 6”
1-1/4” x 6”
www.tamcotools.com
Length UC Wt.
14-1/2”
11.25
12.25
List Price
$111.45
$120.00
724-258-6692 F
Paving Breaker Accessories
Digging Chisel
Ground Rod Drivers
Detachable Shanks
Part Number
4071-016
4071-016X
4072-016
4073-018
4074-018
Part Number
4162-609
4162-709
4162-809
4162-909
4163-609
4163-709
4163-809
4163-909
4164-609
4164-709
4164-809
4164-909
Part Number
44-00307
44-00307X
44-00308
44-00309
44-00310
44-00308L
44-00309L
44-00310L
Shank Size Rod Size
5/8”
3/4”
1” x 4-1/4”
7/8”
1”
5/8”
3/4”
1-1/8” x 6”
7/8”
1”
5/8”
3/4”
1-1/4” x 6”
7/8”
1”
Shank Size
7/8” x 3-1/4”
7/8” x 4-1/4”
1” x 4-1/4”
1-1/8” x 6”
1-1/4” x 6”
1” x 4-1/4”
1-1/8” x 6”
1-1/4” x 6”
**Use Large Taper Detachable Shanks**
**Use Large Taper Detachable Shanks**
Sign Post Driver (Heads Only)
**Use Small Taper Detachable Shanks**
1-800-826-2672 P
Wt. List Price
7.50
$92.35
7.75
$92.35
8.00
$92.35
10.00
$96.35
11.50
$99.95
Hole Dia.
11/16”
13/16”
1”
1-1/8”
11/16”
13/16”
1”
1-1/8”
11/16”
13/16”
1”
1-1/8”
Description
Small Taper
Shank
9” Under Collar
Large Taper
Shank
9” Under Collar
Part Number
44-01363
44-01364
Sheathing Driver (Head Only)
Tamping Pads (Pads Only)
Shank Size Blade Size
7/8” x 3-1/4”
7/8” x 4-1/4”
1” x 4-1/4”
3” x 10”
1-1/8” x 6”
1-1/4” x 6”
Wt.
5.25
6.75
7.25
Wt.
3.75
4.00
4.50
5.25
6.00
4.50
5.25
6.00
Lgth UC
2”
3”
List Price
$75.50
$75.50
$85.20
$93.35
$79.75
$79.75
$89.25
$98.40
$85.80
$85.80
$95.50
$108.55
List Price
$59.70
$60.85
$59.70
$63.10
$67.75
$60.20
$64.00
$68.55
Wt. List Price
17.25
$160.25
22.25
$167.20
Part Number
44-01352
44-01360
44-01362
Description
7” Round Pad
6” Square Pad
8” Square Pad
Wt. List Price
11.75
$109.40
10.00
$109.40
14.50
$137.10
Part Number
44-01910
44-01911
Description
3-1/2” ID Driver Only
Post Block Insert Only
Wt. List Price
14.25
$109.45
4.00
$61.35
www.tamcotools.com
724-258-6692 F
21
Chipping Hammer Steel
RSOR
Flat Chisels
Bull / Moil Points
2” Wide Flat Blade
3” Wide Flat Blade
HSOR
RSRR
HSRR
Length
9”
12”
18”
24”
36”
48”
60”
72”
84”
96”
Weight
1.25
1.75
2.50
3.00
5.25
6.00
9.00
9.25
12.50
14.50
RSOR
1401-009
1401-012
1401-018
1401-024
1401-036
1401-048
1401-060
1401-072
1401-084
1401-096
HSOR
1501-009
1501-012
1501-018
1501-024
1501-036
1501-048
1501-060
1501-072
1501-084
1501-096
RSRR
1601-009
1601-012
1601-018
1601-024
1601-036
1601-048
1601-060
1601-072
1601-084
1601-096
HSRR
Box Qty
1701-009
25
25
1701-012
1701-018
20
1701-024
15
1701-036
1701-048
1701-060
1701-072
1701-084
1701-096
List Price
$11.95
$14.05
$18.40
$22.65
$31.55
$40.50
$49.40
$58.35
$67.25
$76.25
Length
9”
12”
18”
24”
36”
48”
60”
72”
84”
96”
Weight
1.25
1.75
2.50
3.50
5.25
7.00
9.25
11.00
12.50
14.50
RSOR
1411-009
1411-012
1411-018
1411-024
1411-036
1411-048
1411-060
1411-072
1411-084
1411-096
HSOR
1511-009
1511-012
1511-018
1511-024
1511-036
1511-048
1511-060
1511-072
1511-084
1511-096
RSRR
1611-009
1611-012
1611-018
1611-024
1611-036
1611-048
1611-060
1611-072
1611-084
1611-096
HSRR
Box Qty
1711-009
25
1711-012
25
20
1711-018
1711-024
15
1711-036
1711-048
1711-060
1711-072
1711-084
1711-096
List Price
$11.95
$14.05
$18.40
$22.65
$31.55
$40.50
$49.40
$58.35
$67.25
$76.25
Length
9”
12”
18”
24”
36”
48”
60”
72”
84”
96”
Weight
1.25
1.75
2.50
3.50
5.25
7.00
9.25
11.00
12.50
14.50
RSOR
1407-009
1407-012
1407-018
1407-024
1407-036
1407-048
1407-060
1407-072
1407-084
1407-096
HSOR
1507-009
1507-012
1507-018
1507-024
1507-036
1507-048
1507-060
1507-072
1507-084
1507-096
RSRR
1607-009
1607-012
1607-018
1607-024
1607-036
1607-048
1607-060
1607-072
1607-084
1607-096
HSRR
Box Qty
1707-009
25
1707-012
25
1707-018
20
1707-024
15
1707-036
1707-048
1707-060
1707-072
1707-084
1707-096
List Price
$15.85
$17.85
$21.35
$25.50
$35.40
$45.25
$55.05
$64.95
$74.80
$84.70
Length
12”
Weight RSOR
HSOR
RSRR
HSRR
Box Qty
2.00 1442-012 1542-012 1642-012 1742-012
15
List Price
$37.20
** Longer lengths are available for narrow chisels, moil points, and 2” wide flat blades **
22
1-800-826-2672 P
www.tamcotools.com
724-258-6692 F
Chipping Hammer Steel
1-1/2” Wide Flat Blade
Bushing
g Tools
Length
9”
12”
18”
Weight RSOR
HSOR
RSRR
HSRR
Box Qty
N/A
1406-009 1506-009 1606-009 1706-009
N/A
1406-012 1506-012 1606-012 1706-012
1406-018 1506-018 1606-018 1706-018
List Price
$14.25
$16.40
$19.90
Length
9”
Weight RSOR
HSOR
RSRR
HSRR
Box Qty
2.50 1482-009 1582-009 1682-009 1782-009
N/A
List Price
$57.15
****Ground Rod Drivers available upon request****
Non-Retainer Chipping Hammer Steel
Non-Retainer Steel Flat Chisel
Length
9”
12”
18”
24”
36”
48”
60”
Round Shank
3/4” Stock
1001-009
1001-012
1001-018
1001-024
1001-036
1001-048
1001-060
Hex Shank
3/4” Stock
1201-009
1201-012
1201-018
1201-024
1201-036
1201-048
1201-060
List
Price
$10.15
$13.20
$16.20
$19.55
$30.05
$40.50
$51.00
Round Shank
7/8” Stock
1101-009
1101-012
1101-018
1101-024
1101-036
1101-048
1101-060
Hex Shank
7/8” Stock
1301-009
1301-012
1301-018
1301-024
1301-036
1301-048
1301-060
List
Price
$12.55
$15.70
$18.85
$22.30
$33.25
$44.10
$55.00
Non-Retainer Steel Offset Flat Chisels
Length
12”
18”
Round Shank
3/4” Stock
N/A
Hex Shank
3/4” Stock
1202-012
1202-018
List
Price
$14.80
$17.85
Round Shank
7/8” Stock
1102-018
Hex Shank
7/8” Stock
N/A
List
Price
$20.50
Hex Shank
7/8” Stock
2” Wide Pt.
1307-009
1307-012
1307-018
List
Price
Non-Retainer Steel Wide Flat Blade
Length
9”
12”
18”
Round Shank
3/4” Stock
1-1/4” Wide Pt.
N/A
N/A
N/A
1-800-826-2672 P
Hex Shank
3/4” Stock
1-1/4” Wide Pt.
1205-009
N/A
1205-018
List
Price
$11.75
N/A
$18.10
Round Shank
7/8” Stock
2” Wide Pt.
1107-009
1107-012
1107-018
www.tamcotools.com
$15.05
$18.20
$21.35
724-258-6692 F
23
Rivet Buster Steel
Length Small Buster
9”
12”
18”
24”
36”
48”
Flat Chisels
Wt.
1.50
2.00
3.00
3201-009
3201-012
3201-018
3201-024
3201-036
3201-048
Length Small Buster
9”
12”
18”
24”
36”
48”
Bull / Moil Points
Wt.
1.50
2.00
3.00
3211-009C
3211-012C
3211-018C
3211-024C
3211-036C
N/A
Length
Length Small Buster
Wt.
3258-009
3258-012
1.50
2.25
Rivet
Size
3/8”
1/2”
5/8”
3/4”
7/8”
1”
Small Buster
Wt.
3260-009
3261-009
3262-009
3263-009
3264-009
N/A
1.25
1.50
1.50
1.50
Small Buster
Wt.
4” Lg Backout Punch
Rivet
Size
5/8”
3/4”
7/8”
3270-010
3271-010
3272-010
1.50
1.50
1.75
Small Buster
Wt.
6” Lg Backout Punch
Rivet
Size
5/8”
3/4”
7/8”
3273-012
3274-012
3275-012
1.50
1.75
2.00
Small Buster
Wt.
8” Lg Backout Punch
Rivet
Size
5/8”
3/4”
7/8”
3276-014
3277-014
3278-014
1.75
2.00
2.50
9”
12”
Ripper Chisels
Chise
els
Std. Backout Punch
24 1-800-826-2672
P
Jumbo
Buster
3301-010
3301-012
3301-018
3301-024
3301-036
3301-048
List
Price
$15.65
$19.50
$28.80
$39.40
$55.25
N/A
Jumbo
Buster
3311-010C
3311-012C
3311-018C
3311-024C
3311-036C
3311-048C
Jumbo Buster
“Duck Bill”
3301-810
3301-810SPEC
1-1/8” X 10”
1-1/8” X 10”
Radius Blade
List
Price
$15.65
$19.50
$28.80
$39.40
$55.25
$70.65
List
Price
$26.00
$28.30
List
Price
$19.60
$19.60
$19.60
$19.60
$19.60
N/A
Jumbo
Buster
3358-009
3358-012
Jumbo
Buster
3360-009
3361-009
3362-009
3363-009
3364-009
3365-009
List
Price
$25.30
$25.30
$25.30
Jumbo
Buster
3370-010
3371-010
3372-010
List
Price
$26.80
$26.80
$26.80
Jumbo
Buster
3373-012
3374-012
3375-012
List
Price
$28.90
$28.90
$28.90
Jumbo
Buster
3376-014
3377-014
3378-014
www.tamcotools.com
Wt.
2.00
2.50
3.75
Wt.
2.00
2.50
3.75
List
Price
$18.20
$22.15
$29.95
$40.55
$57.90
$75.30
Box
Qty
25
25
15
List
Price
$18.20
$22.15
$29.95
$40.55
$57.90
$75.30
Box
Qty
25
25
15
Wt.
List Price
1.85
2.00
$19.35
$23.10
Wt.
2.00
2.25
Wt.
1.50
1.50
1.75
1.75
2.00
Wt.
1.75
2.00
2.25
Wt.
1.75
2.00
2.25
Wt.
2.00
2.25
2.50
List
Price
$28.90
$32.45
Box
Qty
25
25
List
Price
$22.75
$22.75
$22.75
$22.75
$22.75
$22.75
Box
Qty
25
25
25
25
25
25
List
Price
$29.55
$29.55
$29.55
Box
Qty
25
25
25
List
Price
$31.05
$31.05
$31.05
Box
Qty
25
25
25
List
Price
$32.75
$32.75
$32.75
Box
Qty
25
25
25
724-258-6692 F
Detachable Bit Hollow Drill Steel
7/8” x 3-1/4” Shank H-Thread
Length U.C.
12”
18”
24”
30”
36”
48”
60”
72”
96”
120”
Part Number
44-01414H
44-01415H
44-01416H
44-014161H
44-01417H
44-01418H
44-01419H
44-01420H
44-01421H
44-01422H
Wt.
3.00
4.00
5.00
6.00
7.00
9.00
11.00
14.00
18.00
22.00
List Price
$57.35
$62.25
$67.20
$72.65
$78.10
$88.55
$99.05
$109.55
$134.85
$160.25
Part Number
44-01428H
44-01429H
44-01430H
44-014301H
44-01431H
44-01432H
44-01433H
44-01434H
44-01435H
44-01436H
Wt.
4.00
5.00
7.00
9.00
10.00
12.00
15.00
18.00
23.00
28.00
List Price
$61.75
$67.40
$73.10
$79.35
$85.50
$96.65
$107.80
$118.95
$146.50
$174.00
7/8” x 3-1/4” Shank E-Thread
Length U.C.
12”
18”
24”
30”
36”
48”
60”
72”
Part Number
44-01414E
44-01415E
44-01416E
44-014161E
44-01417E
44-01418E
N/A
N/A
Wt.
2.75
3.00
3.50
5.00
5.75
8.00
Length U.C.
12”
18”
24”
30”
36”
48”
60”
72”
Part Number
44-01450H
44-01451H
44-01452H
44-01455H
44-01456H
44-01453H
44-014531H
44-01454H
Wt.
3.25
4.25
5.25
6.25
7.25
9.25
12.00
13.25
List Price
$58.45
$63.35
$68.25
$73.70
$79.20
$89.65
$100.15
$110.65
H-Thread Extentions
1” x 4-1/4” Shank H-Thread
Length U.C.
12”
18”
24”
30”
36”
48”
60”
72”
96”
120”
7/8” x 4-1/4” Shank H-Thread
List Price
$84.90
$89.80
$94.70
$100.15
$105.65
$116.15
N/A
N/A
Length U.C.
24”
36”
48”
72”
96”
Part Number
44-01430X
44-01431X
44-01432X
44-01434X
44-01435X
Wt.
7.00
10.00
12.00
18.00
23.00
List Price
$73.10
$85.50
$96.65
$118.95
$146.50
Couplings and Adaptors
Description
Coupling
H to D Adaptor
Part Number
44-01504H
44-01507
Wt.
0.50
0.75
List Price
$27.30
$40.45
1” x 4-1/4” Shank D-Thread
Length U.C.
12”
18”
24”
30”
36”
48”
60”
72”
Part Number
44-01428D
44-01429D
44-01430D
Wt.
4.25
5.50
6.50
List Price
$81.40
$87.05
$92.70
44-01431D
44-01432D
9.25
11.00
$105.20
$116.35
44-01434D
15.00
$138.60
11 Degree Tapered Steel, 7/8 x 3-1/4
1” Rope Thread Drill Steel
Length U.C.
18”
24”
30”
36”
48”
60”
Part Number
44-01429RT
44-01430RT
44-014301RT
44-01431RT
44-01432RT
44-01433RT
List Price
$145.60
$168.00
$176.55
$185.11
$204.75
$224.90
Length U.C.
12”
18”
24”
30”
36”
42”
48”
60”
Part Number
44-DS7312
44-DS7318
44-DS7324
44-DS7330
44-DS7336
44-DS7342
44-DS7348
44-DS7360
List Price
$69.40
$70.90
$79.30
$83.35
$90.90
$97.15
$134.80
$152.25
***Also available in 7/8 x 4-1/4 and 1”***
1-800-826-2672 P
www.tamcotools.com
724-258-6692 F
25
Threaded Rock Bits
Thread Type
D
E
H
Dimension A
1.180”
0.623”
0.998”
Dimension B
1-3/4”
7/8”
1-3/8”
Dimension C
0.868”
0.500”
0.711”
Threads/Inch
5
6
6
Multi-Use Threaded Carbide Rock Bits
Bit
Diameter
Bit
Diameter
Part
Number
Inch
MM
1-3/8”
35
HTI-137H
1-1/2”
38
HTI-150H
1-5/8”
41
1-3/4”
45
1-7/8”
48
Wt.
Carbide
Height
Carbide
List
Price
(MM)
Width
(MM)
0.50
14
8
$43.65
0.60
14
8
$46.20
HTI-162H
0.65
14
8
$55.55
HTI-175H
0.80
14
8
$60.60
HTI-187H
0.90
14
8
$66.85
2”
51
HTI-200H
1.10
14
8
$72.45
2-1/4”
57
HTI-225H
1.20
14
8
$81.30
2-1/2”
64
HTI-250H
1.30
14
9.5
$109.85
2-3/4”
70
HTI-275H
1.55
20
12
$142.50
3”
76
HTI-300H
2.00
23
12
$148.65
All Steel Threaded Rock Bits
E-Thread
Inch
MM
Part #
Wt.
List
Price
15/16”
24
44-0RB15E
0.12
$13.15
1”
25
44-0RB16E
0.12
$13.15
1-1/8”
29
44-0RB18E
0.14
$13.40
1-1/4”
32
44-0RB20E
0.16
$13.40
H - THREAD
11 Degree Tapered Rock Bits
We offer a line of Tapered 11 Degree Carbide Bits,
Ballistic Button Bits, and Rope Threaded Bits.
Please call us for information and pricing!
26
1-800-826-2672 P
1-3/8”
35
44-0RB22H
0.44
$9.35
1-1/2”
38
44-0RB24H
0.46
$9.35
1-5/8”
41
44-0RB26H
0.56
$9.80
1-3/4”
45
44-0RB28H
0.60
$12.90
1-7/8”
48
44-0RB30H
0.82
$14.30
2”
51
44-0RB32H
0.88
$14.30
2-1/4”
57
44-0RB36H
1.16
$15.70
2-1/2”
64
44-0RB40H
1.30
$18.35
2-5/8”
67
44-0RB42H
1.34
$21.30
D - THREAD
3-1/2”
89
44-0RB56D
2.90
$22.40
4”
102
44-0RB64D
3.30
$38.75
www.tamcotools.com
724-258-6692 F
Carbide Tipped Hollow Drills
Hexagon Shank
Drill Lgth 7/8” x 3-1/4”
Bit
Diameter Depth U.C.
6”
9”
44-03034
9”
12”
44-02040
5/8”
15”
18”
44-03033
21”
24” 44-030331
27”
30” 44-0303311
6”
9”
44-01218
9”
12”
44-01219
15”
18”
44-03037
24”
44-01226
3/4”
21”
27”
30”
44-01228
33”
36” 44-012282
48” 44-012284
45”
6”
9”
44-00991
9”
12”
44-01229
44-03038
15”
18”
24”
44-00993
7/8”
21”
27”
30”
44-01221
44-012211
36”
33”
48” 44-012214
45”
12”
44-00994
9”
15”
18”
44-03039
44-01232
24”
21”
1”
30”
44-01222
27”
33”
36” 44-012221
48” 44-0122211
45”
12”
44-00997
9”
44-00998
15”
18”
21”
24”
44-01223
1-1/8”
30”
44-01231
27”
44-012311
33”
36”
45”
48” 44-0123111
15”
18”
44-01002
1-3/16”
21”
24”
44-01003
12”
44-00999
9”
15”
18”
44-01000
21”
24”
44-01224
1-1/4”
27”
30”
44-03041
33”
36”
44-030411
45”
48” 44-030413
44-03025
9”
12”
15”
18”
44-03026
44-03027
1-3/8”
21”
24”
44-03028
27”
30”
45”
48”
44-03029
44-03043
9”
12”
15”
18”
44-03044
44-03042
1-1/2”
21”
24”
44-03045
27”
30”
45”
48”
44-03046
9”
12” 44-030472
15”
18” 44-030441
1-5/8”
21”
24” 44-030474
27”
30” 44-030475
1-800-826-2672 P
Wt.
1.50
1.75
2.00
2.50
3.00
1.75
2.00
2.50
3.00
3.50
3.75
4.25
2.00
2.50
3.00
3.75
4.50
5.00
6.25
2.75
3.50
4.25
5.25
6.00
7.50
3.00
4.00
5.00
6.00
6.75
8.75
4.00
5.00
3.00
4.00
5.00
6.00
7.00
8.75
3.25
4.00
5.25
6.25
7.50
3.25
4.25
5.25
6.25
9.00
3.00
4.00
5.50
6.50
List
7/8” x 4-1/4”
Price
$107.50
44-01934
$115.45
44-01935
$133.55
44-01948
$144.40
44-01950
$167.50
44-01960
$97.55
44-019359
44-01936
$103.30
$112.80
44-01937
$113.80
44-01951
$116.50
44-01961
$131.05
44-019611
$160.15
44-019614
44-019371
$ 97.65
$ 99.20
44-01938
44-01939
$109.40
44-01952
$113.95
$117.30
44-01949
44-019491
$131.45
$161.05
44-019493
44-01940
$106.05
44-01941
$110.85
$112.00
44-01942
$120.85
44-019421
$134.95
44-019422
$164.45 44-0194221
$107.55
44-01943
$110.60
44-01944
$114.15
44-01946
$117.30
44-019461
$130.95
44-019462
$162.05
44-019464
$148.00
44-019465
$151.50
44-019466
44-01953
$114.15
$117.30
44-01945
44-01954
$120.50
44-019541
$123.55
$139.35
44-019542
44-019544
$168.75
$110.60
44-01955
$115.05
44-01947
$116.50
44-01956
$118.10
44-019561
$161.35
44-019563
$127.35
44-01957
$132.20
44-01958
$137.10
44-01959
$142.05
44-019591
$185.20
44-019596
$163.35
$171.75
44-030442
$180.25
44-01963
$188.70
Wt.
1.75
2.00
2.25
2.75
3.25
2.00
2.25
2.75
3.25
3.75
4.00
4.50
2.25
2.75
3.25
4.00
4.75
5.25
6.50
3.00
3.75
4.50
5.50
6.25
7.75
3.25
4.25
5.25
6.25
7.00
9.00
4.50
5.25
3.25
4.25
5.25
6.25
7.25
9.00
3.50
4.25
5.50
6.50
9.25
3.50
4.50
5.50
6.50
9.00
List
Price
$108.65
$116.55
$134.65
$145.50
$168.60
$98.60
$104.35
$113.85
$114.90
$117.60
$132.15
$161.30
$98.70
$100.25
$110.55
$115.05
$118.40
$132.60
$162.10
$107.15
$111.95
$113.10
$121.90
$136.05
$165.55
$108.70
$111.65
$115.25
$118.40
$132.00
$163.20
$149.10
$152.55
$115.25
$118.40
$121.55
$124.70
$140.45
$169.85
$111.65
$116.15
$117.60
$119.25
$162.35
$128.45
$133.30
$138.25
$143.10
$186.25
4.25
5.75
$172.80
$181.30
www.tamcotools.com
1” x 4-1/4”
44-019621
44-01962
44-019622
44-019623
Wt.
List
Price
2.50 $115.60
3.00 $ 123.85
3.50 $ 125.25
4.00 $ 129.00
44-019624
44-019625
44-019626
44-019627
44-0196271
2.50
3.25
4.00
4.50
5.50
$ 118.65
$ 120.40
$ 122.25
$ 127.65
$ 200.85
44-01971
44-01972
44-01976
44-01977
44-0197711
3.00
4.00
5.00
5.75
6.25
$130.30
$ 131.60
$137.10
$ 145.00
$ 176.00
44-01973
44-01974
44-01978
44-01979
44-019791
44-0197911
3.75
4.50
5.50
6.75
7.75
10.0
$133.90
$ 135.55
$141.90
$ 152.70
$ 179.05
$ 265.70
44-01989
44-01980
44-01981
44-01982
44-0198211
44-019822
44-01990
44-01983
44-01984
44-01985
4.25
5.50
6.75
8.00
7.50
11.5
4.25
5.50
6.50
8.00
$ 137.10
$ 138.70
$ 141.90
$ 154.50
$ 183.15
$ 270.00
$132.45
$ 138.60
$ 145.00
$150.80
44-01991
44-01986
44-01987
44-01988
4.00
5.50
6.75
8.00
$137.10
$ 141.10
$ 147.45
$ 150.50
44-019884
7.00 $ 182.90
724-258-6692 F
27
Carbide Tipped Hollow Drills
C9 Shank Carbide Tipped Hollow Drills (3/4” Round Slotted)
Part
Number
44-03154
44-03155
44-03156
44-03157
44-03140
44-03141
44-031571
44-031572
44-03142
44-03143
44-031438
44-03144
44-03145
44-031458
44-03146
44-03147
44-031478
44-03148
44-03149
Bit
Dia.
5/16”
3/8”
7/16”
15/32”
1/2”
1/2”
9/16”
9/16”
5/8”
5/8”
5/8”
3/4”
3/4”
3/4”
7/8”
7/8”
7/8”
1”
1”
Drill
Depth
8” Solid
8” Solid
8” Solid
8” Solid
8”
10-1/2”
8”
12”
8”
12”
18”
8”
12”
18”
8”
12”
18”
8”
12”
Overall
Lgth.
13”
13”
13”
13”
13”
16”
13”
17”
13”
17”
23”
13”
17”
23”
13”
17”
23”
13”
17”
Wt. List Price
0.75
0.75
1.00
1.00
0.75
1.00
1.00
1.00
1.00
1.25
1.75
1.25
1.50
2.00
1.75
2.25
3.00
1.75
2.50
$81.80
$82.70
$83.50
$84.10
$95.60
$106.90
$96.35
$106.80
$96.65
$107.05
$124.30
$97.85
$109.25
$125.50
$99.10
$110.45
$126.20
$101.20
$112.65
Part
Number
44-031498
44-031497
44-03150
44-03151
44-031518
44-03152
44-03153
44-031538
44-03160
44-03161
44-031618
44-03162
44-03163
44-031631
44-03164
44-03165
44-031651
44-03166
44-03167
Bit
Dia.
1”
1”
1-1/8”
1-1/8”
1-1/8”
1-1/4”
1-1/4”
1-1/4”
1-3/8”
1-3/8”
1-3/8”
1-1/2”
1-1/2”
1-1/2”
1-5/8”
1-5/8”
1-5/8”
1-3/4”
1-3/4”
Drill
Depth
18”
23”
8”
12”
18”
8”
12”
18”
8”
12”
18”
8”
12”
18”
8”
12”
18”
8”
12”
Overall
Lgth.
23”
28”
13”
17”
23”
13”
17”
23”
13”
17”
23”
13”
17”
23”
13”
17”
23”
13”
17”
Wt. List Price
3.50
4.50
2.00
2.75
3.75
2.25
2.75
4.00
2.25
3.00
4.00
2.25
3.00
4.00
2.50
3.00
4.00
2.50
3.25
$130.00
$177.70
$103.50
$115.00
$130.40
$112.65
$124.25
$132.80
$114.95
$126.30
$141.90
$124.30
$135.65
$144.65
$126.30
$137.95
$175.35
$128.65
$140.10
U7 Shank Carbide Tipped Hollow Drills (9/16” x 1-3/4” Hex Shank)
Part
Bit
Number
Dia.
44-01840
1/2”
44-01841
1/2”
9/16”
44-01855
44-01856
9/16”
5/8”
44-01842
44-01843
5/8”
44-018431 5/8”
44-01844
3/4”
44-01845
3/4”
44-018458 3/4”
44-01846
7/8”
Drill
Depth
8”
12”
8”
12”
8”
12”
18”
8”
12”
18”
8”
Overall
Lgth.
13”
16”
13”
16”
13”
16”
22”
13”
16”
22”
13”
Wt. List Price
0.75
1.00
0.75
1.00
1.00
1.25
2.00
1.25
1.50
2.00
1.50
$118.20
$127.10
$118.20
$127.10
$118.20
$127.10
$163.65
$118.20
$127.10
$163.65
$101.40
C9 Shank Non-Rotating
Chipping Accessories
Part Number
44-01818
44-0181816
44-01819
44-0181916
44-018192
44-01820
28
Description
Moil Pt.
Moil Pt.
Chisel 1” BLD
Chisel 1” BLD
Chisel 1” BLD
Chisel 2” BLD
1-800-826-2672 P
Lgth.
10”
16”
10”
16”
24”
10”
Part
Number
44-01847
44-018471
44-01848
44-01849
44-018491
44-01850
44-01851
44-01852
44-01853
44-01857
44-01858
Bit
Dia.
7/8”
7/8”
1”
1”
1”
1-1/8”
1-1/8”
1-1/4”
1-1/4”
1-1/2”
1-3/4”
Drill
Depth
12”
18”
8”
12”
18”
8”
12”
8”
12”
12”
12”
Overall
Lgth.
16”
22-1/2”
13”
16”
22-1/2”
13”
16”
13”
16”
16”
16”
Wt. List Price
1.75
2.25
1.75
2.25
2.75
1.75
2.25
2.00
2.75
2.75
3.00
$113.10
$151.00
$103.65
$115.35
$124.95
$106.05
$117.70
$115.35
$131.00
$138.35
$142.85
U7 Shank Non-Rotating
Chipping Accessories
List Price
$21.55
$28.90
$21.25
$28.90
$36.75
$32.90
Part Number
44-01680
44-01685
44-01686
Description
Moil Pt.
Chisel 1” BLD
Chisel 2” BLD
www.tamcotools.com
Lgth.
10”
10”
10”
List Price
$19.15
$19.15
$34.90
724-258-6692 F
Seize-Free Carbide Hollow Drills
Seize-Free Carbide Drill Bits
Part Number
Bit Dia. Drill Depth
Shank Size
Lgth UC
Wt.
List Price
44-THB7308822
19”
7/8” x 3-1/4”
22”
3.25
$179.70
44-THB7308827
24”
7/8” x 3-1/4”
27”
3.75
$222.30
44-THB7308840
37”
7/8” x 3-1/4”
40”
5.25
$319.00
7/8”
44-THB7408822
19”
7/8” x 4-1/4”
22”
3.50
$180.95
44-THB1408822
19”
1” x 4-1/4”
22”
3.75
$299.60
44-THB1408827
24”
1” x 4-1/4”
27”
4.25
$342.20
Tamco’s patented Seize-Free carbide drill bit combines a unique, spiral fluted design with increased air flow
to the carbide tip. This prevents drill binding, the most common problem encountered when drilling through
pavement overlays such as asphalt, concrete and stone.
Carbide Tipped Hollow Drill Fitment Chart
Manufacturer 7/8” x 3 -1/4” Shank 7/8” x 4 -1/4” Shank
American Pneumatic
115, 137, 155
Atlas Copco
Chicago Pneumatic CP14RR, CP22, CP-32A-87
4108, 4112
Harper
Ingersoll Rand
Jet
RD-15, RD-30, RD-60
Kent
MacDonald
Ramit
Sullair
MRD-30, MRD-40, MRD-50
14D, 15D
Thor
THD 1100U/N, TJ-15, TJ-20
Toku
Urhu
4110, 4114
1” x 4 -1/4” Shank
C9 Shank
U7 Shank
137, 155
109
DKR36R
CP-9A
DKR-32, DKR-34
CP69
4110, 4114, 4115
JH30AC, JH40C3
RD-60
RD-619
4105
RD-7
MRD-9
5LHD
TJ-15, TJ-20, TS-55
MRD-40, MRD-50, MRD-55
40066B, 40067B
TS-55
UT-7, MD-8
TH-8
MRD-9(w/hex
chuck)
TH800
Tamco Hard Tipped Drill Bits
Over 45 years of experience producing quality carbide tipped drills for use with pneumatic drills has resulted in
products which perform the toughest of jobs. Our drill bits perform with huge success in all construction and/or demolition
applications.
Tamco carbide tipped drill bits used in rotary percussion hammers will drill hundreds of holes in granite, and a
greater quantity in softer stone and concrete.
For best results and a longer tool life, the carbide insert should be sharpened frequently. It is not only easier to
grind a small amount of carbide more often, rather than larger amounts of dull carbide less frequently, it also results in
a minimal loss of carbide and maximum usable life of the drill bit. It is a good practice to sharpen the carbide insert after
drilling 100-200 linear inches. This measure will vary accordingly to the hardness and abrasiveness of the material being
drilled. It is important to maintain the original curvature of the carbide along with the 110 degree cutting angle during the
sharpening process. Tamco can provide you with a drill guide to check and maintain the proper profile and cutting angle.
Dull carbide will cut slowly and will require more energy to drill a hole. This extra energy is absorbed by the drill,
which can result in fractured carbides, failure of the steel, and/or a failure of the brazing which attaches the carbide into
the steel. Dull carbides should be sharpened on a Green Silicone Carbide grinding wheel with a grit size of approximately
80 grit. These wheels are readily available at most industrial suppliers.
Following these procedures will result in faster drilling, more holes drilled per bit, and fewer failures.
Tamco Hard Tipped Drills
**For Best Results**
1. DO grind carbide after 50 holes
6. DON’T hollow grind
2. DO rotate use of drills
7. DON’T put J10 or L27’s in old adapters
3. DO grind to a 110 degree angle
8. DON’T grind to a knife edge
4. DO use cut outs as guides
9. DON’T let drill get dull
5. DO leave slight flat on the cutting edge
10. DON’T quench in water
1-800-826-2672 P
www.tamcotools.com
724-258-6692 F
29
Hand Tools
Stone Splitting Wedges and Shims
Hole Size
Length Wedge Part Number List Price Length
Shim Part Number
2-1/2”
45-01594
2”
45-01597
3/8”
45-01566
2”
45-01597
7/16”
2-5/8”
2-5/8”
45-01566
2-1/2”
45-00735
1/2”
45-00727
45-00735
5/8”
2-3/4”
45-00731
45-00739
3/4”
4”
7/8”
5”
45-01570
45-01582
45-00740
45-00741
1”
6”
45-01568
45-01569
1-1/4”
8”
45-01583
1-3/8” to 1-5/8”
12”
45-01571
18”
45-01572
45-01584
1-3/8” to 1-5/8”
24”
45-01573
45-01585
1-3/8” to 1-5/8”
45-01587
1-3/8” o 1-5/8”
36”
45-01575
45-01589
48”
45-01577
1-3/8” to 1-5/8”
**All wedges and shims are sold by the individual piece.**
List Price
$2.10
$2.10
$1.70
$1.70
$2.50
$2.80
$3.35
$6.65
$10.00
$19.90
$24.85
$37.20
$49.60
Alloy Wedges
Part Number
6601-004
6602-006
6611-004
6612-004
6621-006
6622-007
6623-008
6631-008
6632-006
6641-007
6642-006
6643-012
6651-007
6661-008
6662-012
6663-012
6671-010
6681-008
6682-012
6683-012
H
1/4”
1/4”
3/8”
3/8”
1/2”
1/2”
1/2”
5/8”
5/8”
3/4”
3/4”
3/4”
7/8”
1”
1”
1”
1-1/2”
2”
2”
2”
W
1/2”
1/2”
3/4”
1”
3/4”
1”
1-1/2”
1-1/4”
2”
3/4”
1”
1”
1”
1”
1-1/2”
3”
2”
2”
2”
3”
L
4”
6”
4”
4”
6”
7”
8”
8”
6”
7”
6”
12”
7”
8”
12”
12”
10”
8”
12”
12”
Wt.
0.25
0.25
0.25
0.25
0.50
0.50
1.00
1.00
1.25
0.50
0.75
1.75
1.00
1.25
2.75
5.00
5.00
4.50
6.75
12.75
List Price
$11.90
$12.90
$13.85
$13.90
$17.00
$17.40
$20.70
$21.75
$24.00
$19.10
$19.10
$25.85
$24.90
$22.90
$53.20
$65.40
$71.20
$66.75
$102.80
$106.70
L
3”
6”
8”
8”
8”
10”
12”
12”
Wt.
0.25
0.50
1.00
1.50
2.00
3.00
5.00
7.00
List Price
$5.80
$6.60
$10.45
$11.10
$13.70
$17.95
$23.55
$32.80
Carbon Right Angle Wedges
Part Number
6881-003C
6882-006C
6883-008C
6884-008C
6885-008C
6886-010C
6887-012C
6888-012C
30
1-800-826-2672 P
H
1/4”
1/2”
3/4”
1”
1-1/4”
1-1/2”
1-3/4”
2”
W
3/4”
1”
1-1/2”
1-1/2”
1-1/4”
1-1/2”
1-3/4”
2”
www.tamcotools.com
724-258-6692 F
Hand Tools
Alloy Banana Wedge
Part Number
6696-013UNB
6696-813UNB
(With Hole)
Height
13/16”
13/16
Width
13/16”
13/16
Length
13”
13”
Wt.
1.25
1.25
List Price
$10.40
$30.00
Alloy Barrel Drift Pins
Part
Pin
Number
Dia.
6531-006 7/16”
6532-006 9/16”
6533-007 11/16”
6534-007 13/16”
6535-008 15/16”
6536-008 1-1/16”
6537-009 1-3/16”
6538-009 1-5/16”
Rivet
Size
3/8”
1/2”
5/8”
3/4”
7/8”
1”
1-1/8”
1-1/4”
End
Center
OAL
Wt.
1-3/4”
2”
2-1/4”
2-1/4”
2-1/2”
2-3/4”
3”
3-1/8”
2-1/2”
2-1/2”
2-1/2”
3”
3”
3”
3”
3-1/4”
6”
6-1/2”
7”
7-1/2”
8”
8-1/2”
9”
9-1/2”
0.25
0.25
0.50
0.75
1.00
1.50
2.00
2.75
List
Price
$6.55
$6.55
$6.75
$7.20
$8.05
$11.30
$14.85
$16.00
Carbon Barrel Drift Pins
Part
Number
6534-008C
6535-008C
6536-008C
6537-008C
Pin
Dia.
13/16”
15/16”
1-1/16”
1-3/16”
Rivet
Size
3/4”
7/8”
1”
1-1/8”
End
Center
OAL
Wt.
2-1/2”
2-1/2”
2-1/2”
2-1/2”
3”
3”
3”
3”
8”
8”
8”
8”
0.75
1.00
1.50
1.75
List
Price
$6.55
$6.85
$8.35
$12.85
Sheeters Chisel
Part Number
Style
5952-008
5907-008
Std.
Heavy Duty
Blade
Width
1-3/4”
2”
Body
Stock
5/8”
3/4”
Length
8”
8”
List
Price
$9.60
$11.45
Flat Chisel
Part Number
5401-008
5401-010
5401-012
5501-008
5501-010
5501-012
5601-008
5601-012
1-800-826-2672 P
Body Stock
3/4”
7/8”
1”
www.tamcotools.com
Length
8”
10”
12”
8”
10”
12”
8”
12”
List Price
$12.25
$13.20
$14.10
$12.80
$13.45
$14.05
$14.65
$16.10
724-258-6692 F
31
Maintenance Bars
Pinch Bars
Part Number
7001-018
7001-024
7002-018
7002-024
7003-018
7003-024
7003-036
7003-048
7004-036
7004-048
7004-060
7005-036
7005-048
7005-060
7005-072
Stk. Size
1/2”
5/8”
3/4”
7/8”
1”
OAL
18”
24”
18”
24”
18”
24”
36”
48”
36”
48”
60”
36”
48”
60”
72”
Lining Bars
List Price
$13.50
$17.05
$14.85
$19.25
$16.10
$21.75
$27.85
$35.85
$31.85
$42.10
$53.25
$40.55
$54.80
$69.20
$83.60
Stk. Size
3/4”
7/8”
1”
OAL
60”
48”
60”
60”
72”
32
Stk. Size
7/8”
1-800-826-2672 P
OAL
30”
3/4”
7/8”
1”
OAL
36”
24”
36”
24”
60”
48”
60”
72”
List Price
$27.45
$21.75
$27.85
$21.85
$53.25
$54.80
$69.20
$83.60
Chisel Bars
List Price
$45.05
$41.15
$52.15
$72.90
$85.95
Nickle Chrome Plated Pinch Bars
Part Number
7004-030NCP
Stk. Size
5/8”
Part Number
7404-036
7404-060
7404-072
7405-060
Needle Bars
Part Number
7503-060
7504-048
7504-060
7505-060
7505-072
Part Number
7202-036
7203-024
7203-036
7204-024
7204-060
7205-048
7205-060
7205-072
Stk. Size
7/8”
1”
OAL
36”
60”
72”
60”
List Price
$28.10
$47.00
$56.65
$64.65
Gooseneck Bars
Part Number
7603-036
7605-048
7605-072
Stk. Size
3/4”
1”
OAL
36”
48”
72”
List Price
$27.85
$54.80
$83.60
List Price
$44.35
www.tamcotools.com
724-258-6692 F
Handled Tools
Tamco Double Faced Sledges
A.R.E.A. Plan 13-83
Alloy Steel Grade B
BT - Tool Head Only
HT - Head w/Wooden Handle
ST - Head w/STM Handle
Part
Number
BT-10201
HT-10201
ST-10201
BT-10251
HT-10251
ST-10251
BT-10202
HT-10202
ST-10202
BT-10252
HT-10252
ST-10252
BT-10203
HT-10203
ST-10203
BT-10204
HT-10204
ST-10204
BT-10206
HT-10206
ST-10206
BT-10208
HT-10208
ST-10208
BT-10210P
HT-10210
ST-10210
BT-10212
HT-10212
ST-10212
BT-10216
HT-10216
ST-10216
BT-10220
HT-10220
ST-10220
Tool
Size
Eye
Size
1#
5/8” x 7/8”
1-1/2#
5/8” x 7/8”
2#
3/4” x 1”
2-1/2#
3/4” x 1”
3#
3/4” x 1”
4#
3/4” x 1”
6#
1” x 1-3/8”
8#
1” x 1-3/8”
10#
1” x 1-3/8”
12#
1” x 1-3/8”
16#
1” x 1-3/8”
20#
1-1/4” x 1-1/2”
Handle
Length
N/A
15”
12”
N/A
15”
12”
N/A
16”
14”
N/A
16”
14”
N/A
16”
14”
N/A
16”
14”
N/A
36”
34”
N/A
36”
34”
N/A
36”
34”
N/A
36”
34”
N/A
36”
34”
N/A
36”
34”
Wt.
Each
1#
1-1/2#
1-3/4#
1-1/2#
2#
2-1/4#
2#
2-1/2#
2-3/4#
2-1/2#
3#
3-1/4#
3#
3-1/2#
3-3/4#
4#
4-1/2#
4-3/4#
6#
6-1/2#
6-3/4#
8#
8-1/2#
8-3/4#
10#
10-1/2#
10-3/4#
12#
12-1/2#
12-3/4#
16#
16-1/2#
16-3/4#
20#
20-1/2#
20-3/4#
List
Price
$28.04
$38.90
$45.31
$32.24
$43.10
$49.51
$39.43
$50.30
$59.69
$45.99
$56.86
$66.26
$50.40
$61.27
$70.67
$54.18
$65.05
$74.50
$58.80
$73.08
$89.09
$74.18
$88.46
$104.48
$90.62
$104.90
$120.91
$104.74
$119.02
$134.98
$149.73
$164.01
$179.97
$180.29
$195.51
$210.53
5# Builder’s Adze
Part Number
BT-82003
HT-82003
Eye Size
Handle Lgth
N/A
Wt. Each
List Price
$76.45
$104.42
BT - Tool Head Only
HT - Head w/Wooden
Handle
1-800-826-2672 P
www.tamcotools.com
724-258-6692 F
33
Handled Tools
Tamco Handled Back-Out Punches
Part
Punch
Number
Dia.
BT-10106
HT-10106
3/8”
ST-10106
BT-10108
HT-10108
1/2”
ST-10108
BT-10110
HT-10110
5/8”
ST-10110
BT-10112
HT-10112
3/4”
ST-10112
BT-10114
HT-10114
7/8”
ST-10114
BT-10116
HT-10116
1”
ST-10116
Alloy Steel Grade B
BT - Tool Head Only
HT - Head w/Wooden
Handle
ST - Head w/STM Handle
Punch
Lgth.
OAL
Eye
Size
2-1/2”
7-1/4”
3/4” x 1”
2-1/2”
7-1/2”
3/4” x 1”
2-3/4”
7-3/4”
3/4” x 1”
3”
8”
3/4” x 1”
3”
8-1/4”
3/4” x 1”
3-1/2”
8-1/2”
3/4” x 1”
Handle
Lgth.
N/A
16”
14”
N/A
16”
14”
N/A
16”
14”
N/A
16”
14”
N/A
16”
14”
N/A
16”
14”
Wt.
Each
1#
1-1/2#
1-3/4#
1-3/4#
2-1/4#
2-1/2#
2#
2-1/2#
2-3/4#
2-1/2#
3#
3-1/4#
3#
3-1/2#
3-3/4#
3-1/2#
4#
4-1/4#
List
Price
$52.13
$63.00
$72.45
$52.13
$63.00
$72.45
$55.34
$66.20
$75.65
$57.91
$68.72
$78.17
$63.16
$74.03
$83.48
$66.78
$77.60
$87.05
Saf-T-Mate Replacement Handles
Part Number
STM-3400
STM-2000
STM-1400
STM-1200
STM-1000
STM-0800
EPK-0100
Fits Eye Size
1” x 1-3/8”
1-1/4” x 1-1/2”
3/4” x 1”
5/8” x 7/8”
24-32 Oz. Machinists Handle
16-20 Oz. Machinists Handle
Epoxy Kit
Length
34”
34”
14”
12”
14”
13”
N/A
List Price
$26.72
$26.72
$16.75
$13.70
$15.02
$13.39
$8.82
Wooden Replacement Handles
Part Number
WH-10001
WH-10002
WH-10003
WH-10004
WH-10005
WH-10006
WH-10007
WH-10009
WH-82003
34 1-800-826-2672
P
Fits Eye Size
5/8” x 7/8”
3/4” x 1”
3/4” x 1-3/8”
3/4” x 1-3/8”
1” x 1-3/8”
1-1/2” x 1-3/8”
#6 Pick
3/4” x 1”
#5 Adze
www.tamcotools.com
Length
16”
16”
24”
36”
36”
36”
36”
36”
36”
List Price
$8.98
$8.98
$11.08
$12.39
$12.39
$13.39
$15.23
$12.39
$26.04
724-258-6692 F
Steel Cross Reference
Ajax
221
221-12
221-18
223
224
225
226
227
231
232
233
234
235
236
237
238
239
241
245
246
246-18
276
276-12
276-18
276-24
278
279
280
281
282
283
284
285
286
287
288
289
290
291
292
293
295
295-12
296
296-12
296-18
296-24
297
297-18
303
303-12
303-18
303-24
303-36
303-48
303-60
303-72
304
304-12
304-18
304-24
304-36
304-48
304-60
304-72
313
314
315
315-18
Tamco
3201-009
3201-012
3201-018
3260-009
3261-009
3262-009
3263-009
009
3264-009
-009
3270-010
-010
3273-012
-012
3276-014
-014
3271-010
-010
3274-012
-012
3277-014
-014
-010
3272-010
3275-010
-010
3278-014
-014
3258-009
-009
3211-009
-009
3211-012
-012
3211-018
-018
3301-010
-010
3301-012
-012
3301-018
-018
3301-024
-024
3360-009
-009
3361-009
-009
3362-009
-009
3363-009
-009
3364-009
-009
9
3365-009
-00
09
3366-009
-0
009
3370-010
-0
010
3373-012
-0
012
3376-014
-014
3371-010
-010
3374-012
-012
3377-014
- 14
-0
3372-010
-0
010
3375-012
-0
012
3378-014
-0
014
3358-009
-00
09
3358-012
-012
2
3311-009
-009
9
3311-012
-012
3311-018
-018
3311-024
-024
3311-012
-012
3311-018
-018
1401-009
-009
1401-012
-012
1401-018
-018
1401-024
-024
-036
1401-036
1401-048
-048
1401-060
-060
1401-072
-072
1501-009
1501-012
1501-018
1501-024
1501-036
1501-048
1501-060
1501-072
1411-009
1511-009
1411-012
1411-018
Ajax
315-24
315-36
315-48
315-60
316
316-18
316-24
316 24
316-36
316-48
316-60
323
323-12
323-12-3
323-18
323-24
323-36
323-48
323-60
324
324-12
324-12-3
324-18
324-24
324-36
6
324-48
324-4
-48
324-60
324
24-60
380
38
382
382-12
382-1
12
382-18
382
2-18
383
3
383-12
383-18
383
3-18
384
4
384-12
384-18
390
392
392-12
392-18
393
393-12
393-18
394
394-12
2
394-18
3 -18
394
8
396
39
96
396-12
396
6-12
396-18
18
397
397-12
397-18
398
398-12
398-18
399
405
406
407
407-18
407-24
407-36
407-48
407-60
407-72
408
408-18
408-24
408-36
Tamco
1411-024
1411-036
1411-048
1411-060
1511-012
1511-018
1511-024
1511 024
1511-036
1511-048
1511-060
1407-009
1407-012
1442-012
1407-018
1407-024
1407-036
1407-048
1407-060
1507-009
9
1507-012
1507-0
7-012
1542-012
154
1507-018
1507-0
018
1507-024
150
077-024
1507-036
15
1507-048
1507-060
2007-007
2053-007
2053-012
2053-018
2051-007
2051
205
1-007
007
2051-012
2051-018
2051--018
2054-007
2054
205
4-007
2054-012
2
2054-018
2054-0
018
1807-007
18077-007
1853-007
1853-012
185
853
3-012
012
1853-018
1853-0
018
8
1851-007
1851-0
007
7
1851-012
1851-0
012
2
1851-018
1854-007
1854-0
185
4 007
07
1854-012
1854-018
2153-007
2153-012
2153-018
2 3-018
215
2151-007
215
151-007
2151-012
2151-0
-012
2151-018
2 1-018
215
8
2154-007
215
54-0
4 07
2154-0
012
2154-012
2154-018
2107-007
1601-009
1701-009
1601-012
1601-018
1601-024
1601-036
1601-048
1601-060
1601-072
1701-012
1701-018
1701-024
1701-036
Ajax
408-48
408-60
408-72
409
410
411
411-18
411 18
411-24
411-24
411-36
411-36
412
412-18
412-24
412-36
423
423-12
423-12-3
423-18
423-24
423
3-24
423-36
423-48
48
423-60
42
423-72
424
424-12
424-12-3
424
424-12
424-12-3
424-18
424-24
424-36
424-36
36
424-48
424-60
424-60
0
424-72
424
4-72
503
50
506
507
508
510
51
511
513
611
612
613
633
634
635
636
660
687
691
876
882
82
884
886
888
905
910
910-1/2
910-11
910-18
912
922
940
11100
11200
11300
12100
12200
Tamco
1701-048
1701-060
1701-072
1611-009
1711-009
1611-012
1611-018
1611 018
1611-024
1611-0
024
1611-036
1711-012
171
1711-017
1711-0
017
1
1711-024
4
1711-036
1711-03
36
1607-009
1607-00
09
1607-012
1642-012
1607-018
16
1607-024
1607-036
1607-0
160
7 36
1607-048
1607
7-048
1607-060
1607
7-060
1607-072
1707-009
1707-012
1707--012
1742-012
1742--012
1707-009
1707-0
009
1707-012
1707-0
-012
1742-012
1742-01
12
1707-018
1707-024
1707-036
1707
170
7-036
036
1707-048
1707-060
17
707-060
0
1707-072
17
707-0
072
5201-006
52
201-0
006
5401-008
54
401-0
008
8
5401-010
54
401-0
010
5401-012
5501-009
5501-0
550
1 09
5501-012
5501
1-01
12
5601-006
5601
1-00
06
6531-006
653
31-006
06
6532-006
6533-007
6533-0
653
3 007
07
6533-007
6534-007
6535-008
6536-008
7603-036
7605-048
6698-010
6696-013
6882-006C
6884-008C
6886-010C
6886-0
010C
6888-012C
2205-006
220
05-006
5 006
2253-006
2201-007
2253-012
2253-018
2203-006
2254-007
2211-007
4001-014
4011-014
4021-014
4001-018
4011-018
Ajax
12300
39500
39501
40010
41080
41100
41130
41200
41200
41300
41700
41701
41734
41758
42100
42200
42300
48400
49500
49501
50100
50200
50300
50400
60010
60020
60030
60040
60050
60060
0
60070
0
60080
0
60090
60100
0
60110
6011
10
60120
601
60130
30
60140
601
140
60150
60160
60160
60170
60170
0
60180
60190
60200
60210
0
60220
6022
20
60230
6023
30
60240
6024
40
60250
6025
50
60260
6026
60
60270
0
60280
0
60290
0
60300
0
60310
0
60320
0
60330
60340
60340
60350
60360
60370
60380
60390
60400
60410
60420
60430
60440
60450
60460
Tamco
4021-018
4103-016
4103-916
4134-009
4074-018
4004-014
4044-016
4044 016
4014-014
4014-0
401
4 14
4024-014
4097-014
4097-0
40
014
4164-909
4164-709
4164-609
416
4004-018
4004-0
4 18
4014-0
4-018
4014-018
4024-018
402
024-0
4 18
4064-012
4064-0
406
4-012
4104-016
4104-916
4104-9
410
4 16
1482-009
09
1582-009
1682-009
1782-009
44-03034
44-02040
44-03033
44-030
4403 33
3
44-01218
4 01218
4444-01219
44-03037
44-01226
44-01228
44-012
44
01228
28
44-00991
44-01229
444-0
01229
44-03038
44
4-030
038
44-00993
44
4-00
0993
44-01221
44
4-012
221
44-01230
444-012
0 30
44-00994
44-03039
4444-01232
44--01232
44-01222
44--01222
44-00997
44-00998
44-01223
44 012
4401223
23
44-01231
44-00999
44-01000
44-01224
44-03041
44-03025
44-03026
44-03027
44-03028
44-03043
44-030
03043
43
44-03044
44-03042
44-030
3042
42
44-03045
44-03045
44-01934
44-01935
44-01948
44-01950
44-01936
44-01937
44-01951
44-01961
44-019371
44-01938
44-01939
44-01952
Ajax
60470
60490
60500
60510
60520
60530
60540
60540
60550
6055
60560
6056
60
60570
60580
60590
60600
60610
60620
60630
60640
60650
60
60660
0
60670
6 70
606
60680
606
0680
60880
608
880
60890
6089
90
60900
6090
00
60910
609
910
60920
60 0
60930
609
093
30
60940
60950
60960
60970
60970
60980
60990
90
61000
610
61010
61020
610
61030
30
62005
62010
620
2010
10
62020
20
62030
620
2030
30
62040
62
2040
62050
62060
62060
62070
62080
62090
62100
62110
62120
62130
63220
0
63230
632
63240
63250
632
325
50
63260
63270
63280
63290
63300
63310
64010
64020
64030
64040
64050
64060
64070
64080
Tamco
44-01949
44-01940
44-01941
44-01942
44-019421
44-01943
44-01944
44 01944
44-01946
44-019461
44-01953
44-01945
44-01954
44-019541
44-01955
44-01947
44-01956
44-019561
44-01957
44-01958
44-01959
44-019591
444-019
0 591
44-01973
44-01
01973
44-01974
44-019
974
7
44-01978
44
8
44-01979
44-01
01979
44-01989
44-019
989
44-01980
80
44-01981
44-01982
44-01990
44-01983
44-019
44
01983
83
44-01984
44-01985
44-01991
44-019
44
01991
91
44-01986
6
44-01987
44-019
4401987
87
44-01988
44-03140
44-01342
44-01343
44-01343
44-031438
44
4-031438
44-03144
44-03144
44-03145
44-031458
44 031
44031458
458
44-03146
44-03147
7
44-031478
44-03147
478
44-03148
44-03
03148
44-03149
444-0
03149
44-031498
44
98
44-031497
44-031
1497
HTI-137H
HTI
TI-137H
HTI-150H
HTI-150H
HTI-162H
HTI-175H
HTI-187H
HTI-200H
HTI-225H
HTI-250H
HTI-275H
HTI-300H
44-01414H
44-01415H
44-01416H
44-014161H
44-01417H
44-01418H
44-01419H
44-01420H
Ajax
64090
64100
64210
64220
64230
64240
64250
64260
64270
64280
64410
64420
64430
64440
64450
64460
64470
64480
64490
64500
B&L
A01014
A01018
A02014
A02018
A 018
A02
A03014
A0
03014
A03018
A03
3018
0
A11014
A1101
014
A11018
A 018
A11
8
A12014
A12014
4
A12018
A1
A13014
A13018
A 018
A13
A14014
A14014
A14018
A15014
A15014
A15018
A15018
A16014
A16018
A21014
A21018
A22014
A22018
A23014
A 014
A23
4
A23018
A2301
18
A24014
A240
014
A24018
A24
24018
A25014
A2
A25018
A26014
A26018
A31014
A31018
A32014
A32018
A33014
A33014
A33018
A34014
A34018
A35014
A35018
A36018
A41014
A41018
A41024
A42014
A42018
A42024
Tamco
44-01421H
44-01422H
44-01450H
44-01451H
44-01452H
44-01455H
44-01456H
44-01453H
44-014531H
44-01454H
44-01428H
44-01429H
44-01430H
44-014301H
44-01431H
44-01432H
44-01433H
44-01434H
44-01435H
44-01436H
Tamco
4011-014X
4011-018X
4001-014X
4001-018X
4021-014X
4021-018X
4011-014
4011-018
4001-014
4001-018
4021-014
4021-018
4011-014H
4011-018H
4001-014H
4001-018H
4021-014H
4021-018H
4012-014
4012-018
4002-014
4002-018
4022-014
4022-018
4012-014H
4012-018H
4002-014H
4002-018H
4022-014H
4022-018H
4013-014
4013-018
4003-014
4003-018
4023-014
4023-014
4023-018
4013-014H
4013-018H
4003-014H
4003-018H
4023-018H
4014-014
4014-018
4014-024
4004-014
4004-018
4004-024
35
Steel Cross Reference
B&L
A43014
A43018
A43024
A44014
A44018
A45014
A45018
A46014
A46018
A90008
A90009
B00300
B00500
B10200
B10300
B10500
B10600
B10700
B11100
B11100
B11300
B20200
B20300
B20500
B20600
B20700
B21100
B21200
B22783
B22785
B22787
B22789
B30200
B30300
B30500
B30600
B30700
B30800
B31100
B31200
B32000
B32783
B32785
B32787
B32789
B34006
B40200
B40300
B40500
B40600
B40600
B40800
B41100
B41200
B42100
B42783
B42785
B42787
B42789
B44006
B91502
B91503
B91606
B91607
B91608
B92300
CBH0000
36
CCH0000
E11012E
Tamco
4024-014
4024-018
4024-024
4014-014H
4014-018H
4004-014H
4004-018H
4024-014H
4024-018H
4043-016
4044-016
4111-016X
4061-012X
4111-916
4111-016
4061-012
4071-016
4081-017
4131-012
4131-012
4121-016
4102-916
4102-016
4062-012
4072-016
4082-017
4132-009
44-00308L
4162-609
4162-709
4162-809
4162-909
4103-916
4103-016
4063-012
4073-018
4083-017
4096-014
4133-009
44-00309L
4093-014
4163-609
4163-709
4163-809
4163-909
44-01910
4104-916
4104-016
4064-012
4074-018
4084-017
4097-014
4134-009
44-00310L
4094-014
4164-609
4164-709
4164-809
4164-909
44-01911
44-01363
44-01364
44-01360
44-01352
44-01362
44-00294
44-01507
44-01504H
44-01414E
B&L
E11012H
E11018E
E11018H
E11024E
E11024H
E11030E
E11030H
E11036E
E11036H
E11048E
E11048H
E11060H
E11072H
E11096H
E11120H
E12012H
E12018H
E12024H
E12030H
E12036H
E12048H
E12060H
E12072H
E23012D
E23012H
E23018D
E23018H
E23024D
E23024H
E23030H
E23036D
E23036H
E23048D
E23048H
E23060H
E23072D
E23072H
E23096H
E23120H
L02F09
L02F12
L02F18
L02F24
L02F36
L02F48
L02F60
L02F72
L02G09
L02G12
L02G18
L02G24
L02G36
L02G48
L02G60
L02G72
L02H09
L02H12
L02H18
L02H24
L02H36
L02H48
L02H60
L02H72
L02J09
L02J12
L02J18
L02J24
L02J36
L02J48
Tamco
44-01414H
44-01415E
44-01415H
44-01416E
44-01416H
44-014161E
44-014161H
44-01417E
44-01417H
44-01418E
44-01418H
44-01419H
44-01420H
44-01421H
44-01422H
44-01450H
44-01451H
44-01452H
44-01455H
44-01456H
44-01453H
44-014531H
44-01454H
44-01428D
44-01428H
44-01429D
44-01429H
44-01430D
44-01430H
44-014301H
44-01431D
44-01431H
44-01432D
44-01432H
44-01433H
44-01434D
44-01434H
44-01435H
44-01436H
1711-009
1711-012
1711-018
1711-024
1711-036
1711-048
1711-060
1711-072
1511-009
1511-012
1511-018
1511-024
1511-036
1511-048
1511-060
1511-072
1611-009
1611-012
1611-018
1611-024
1611-036
1611-048
1611-060
1611-072
1411-009
1411-012
1411-018
1411-024
1411-036
1411-048
B&L
L02J60
L02J72
L03F09
L03F12
L03F18
L03F24
L03F36
L03F48
L03F60
L03F72
L03G09
L03G12
L03G18
L03G24
L03G36
L03G48
L03G60
L03G72
L03H09
L03H12
L03H18
L03H24
L03H36
L03H48
L03H60
L03H72
L03J09
L03J12
L03J18
L03J24
L03J36
L03J48
L03J60
L03J72
L07F00
L07G00
L07H00
L07J00
L11F09
L11F12
L11F18
L11F24
L11G09
L11G12
L11G18
L11G24
L11H09
L11H12
L11H18
L11H24
L11J09
L11J12
L11J18
L11J24
L14J09
L21A09
L21A12
L21A18
L21B10
L21B12
L21B18
L21B24
L22A09
L22A12
L22A18
L22B10
L22B12
L22B18
L22B24
Tamco
1411-060
1411-072
1701-009
1701-012
1701-018
1701-024
1701-036
1701-048
1701-060
1701-072
1501-009
1501-012
1501-018
1501-024
1501-036
1501-048
1501-060
1501-072
1601-009
1601-012
1601-018
1601-024
1601-036
1601-048
1601-060
1601-072
1401-009
1401-012
1401-018
1401-024
1401-036
1401-048
1401-060
1401-072
1782-009
1582-009
1682-009
1482-009
1707-009
1707-012
1707-018
1707-024
1507-009
1507-012
1507-018
1507-024
1607-009
1607-012
1607-018
1607-024
1407-009
1407-012
1407-018
1407-024
1442-012
3211-009C
3211-012C
3211-018C
3311-009
3311-012
3311-018
3311-024
3201-009
3201-012
3201-018
3301-010
3301-012
3301-018
3301-024
B&L
LD1012A
LD892AH
LE23
LE26
LE27
LE32
LH35SH
LH38SH
LH41SH
LH44SH
LH47SH
LH50SH
LH57SH
LH63SH
LH66SH
T1207MO
T1507MO
T1607MO
T1707MO
T1907MO
T2007MO
T2207MO
T2507MO
T2507MO
X30216
X30219
X30222
X30225
X30316
X30319
X30322
X30325
X30325
X30328
X30328
X30332
X30335
X30338
X30416
X30419
X30422
X30425
X30425
X30428
X30428
X30432
X30435
X30438
X30616
X30619
X30622
X30825
X30828
X30832
X30835
X30838
X31216
X31222
X31316
X31319
X31322
X31325
X31328
X31332
X31335
X31338
X31416
X31419
X31422
Tamco
44-ORB64D
44-ORB56D
44-ORB15E
44-ORB16E
44-ORB18E
44-ORB20E
44-ORB22H
44-ORB24H
44-ORB26H
44-ORB28H
44-ORB30H
44-ORB32H
44-ORB36H
44-ORB40H
44-ORB42H
HTI-137H
HTI-150H
HTI-162H
HTI-175H
HTI-187H
HTI-200H
HTI-225H
HTI-250H
HTI-300H
44-03034
44-01218
44-00991
44-01230
44-02040
44-01219
44-01229
44-00994
44-00994
44-00997
44-00997
44-00999
44-03025
44-03043
44-03033
44-03037
44-03038
44-03039
44-03039
44-00998
44-00998
44-01000
44-03026
44-03044
44-030331
44-01226
44-00993
44-01222
44-01231
44-03041
44-03028
44-03045
44-01934
44-019371
44-01935
44-01936
44-01938
44-01940
44-01943
44-01953
44-01955
44-01957
44-01948
44-01937
44-01939
B&L
X31425
X31428
X31432
X31435
X31438
X31616
X31619
X31622
X31625
X31628
X31632
X31635
X31638
X31819
X31822
X31825
X31828
X31832
X31835
X31838
X32129
X32319
X32322
X32325
X32328
X32332
X32335
X32338
X32419
X32422
X32425
X32428
X32432
X32435
X32438
X32619
X32622
X32625
X32628
X32632
X32635
X32638
X32819
X32822
X32825
X32828
X32835
X32838
X32932
X90116
X90119
X90122
X90125
X90128
X90132
X90135
X90138
X90212
X90312
X90316
X90319
X90322
X90325
X90328
X90332
X90335
X90338
X90416
X90419
Tamco
44-01941
44-01944
44-01945
44-01947
44-01958
44-01950
44-01951
44-01952
44-01942
44-01946
44-01954
44-01956
44-01959
44-01961
44-01949
44-019421
44-019461
44-019541
44-019561
44-019591
44-019359
44-019621
44-019624
44-01971
44-01973
44-01989
44-01990
44-01991
44-01962
44-019625
44-01972
44-01974
44-01980
44-01983
44-01986
44-019622
44-019626
44-01976
44-01978
44-01981
44-01984
44-01987
44-019623
44-019627
44-01977
44-01979
44-01985
44-01988
44-01982
44-03142
44-03144
44-03146
44-03148
44-03150
44-03152
44-03160
44-03162
44-03140
44-03141
44-03143
44-03145
44-03147
44-03149
44-03151
44-03153
44-03161
44-03163
44-031438
44-031458
B&L
X90422
X90425
X90428
X90432
X90435
X90438
X90625
Chi Pneu
8542
8572
41644
46072
46073
46080
49969
50411
51064
52043
54013
56148
59229
71005
71007
71008
71009
71010
71011
71202
71204
71205
71206
71207
71587
72209
72216
72217
73225
82291
84175
84176
87376
92294
92295
92298
92299
92848
92882
92883
95775
98851
123996
123998
123999
829150
829165
829310
837201
837203
839008
839009
839010
839011
839013
839014
839018
839019
839023
839024
839038
Tamco
44-031478
44-031498
44-031518
44-031538
44-031618
44-031631
44-031497
Tamco
2201-007
2301-007
1407-009
2205-007
2201-007
2201-018
1401-018
1501-024
2205-006
1507-012
1401-036
1411-018
1401-018
3301-009
3362-009
3363-009
3364-009
3358-009
3311-012
3201-009
3262-009
3263-009
3264-009
3258-009
3361-009
3261-009
3365-009
3265-009
2153-007
2201-007
2151-009
2151-012
2154-007
1401-009
1401-012
1501-009
1501-012
3311-009
1411-009
1411-012
3301-012
1511-009
1853-007
1851-007
1854-007
2153-007
2151-007
2154-007
2201-007
2205-006
1501-009
1501-012
1501-018
3258-009
3211-009
1401-009
1511-009
3201-009
1411-009
3203-009
3261-009
Steel Cross Reference
Chi Pneu
839042
839045
839047
839050
839051
839083
839084
839098
839190
839334
839335
839341
839467
71208-10
71208-12
R-004938
R-004949
R-005738
R-005739
R-005752
R-005753
R-056233
R-070115
R-070116
R-070118
R-070119
R-070131
R-076398
R-076399
R-085363
R-085364
R-085446
R-085447
R-085448
R-085449
R-085501
R-085502
R-085503
R-085504
R-085505
R-085506
R-085507
R-085508
R-085509
R-085510
R-085511
R-085519
R-085520
R-085522
R-085525
R-092246
R-096849
R-096850
R-096851
R-096852
R-098002
R-098003
R-098070
I.R.
22040463
22040471
22040489
22040588
22040596
22040604
22040620
22040778
22040927
22040935
Tamco
3263-009
1401-018
3265-009
1854-007
1853-007
1401-012
1511-012
2301-007
1411-012
1854-018
1853-018
1853-012
1851-007
3211-009
3211-012
4014-014
4013-014
4074-018
4073-018
4023-014
4024-014
4024-018
4012-014
4102-016
4022-014
4072-016
4002-014
4064-012
4063-012
4002-024
4002-036
4003-014
4003-018
4004-014
4004-018
4002-018
4012-018
4012-024
4013-018
4013-024
4013-036
4014-018
4014-024
4014-036
4004-024
4004-036
4003-024
4003-036
4012-036
4023-018
4111-016
4001-018
4001-014
4011-018
4011-014
4103-016
4104-016
4062-012
Tamco
4042-016
4043-016
4044-016
4162-909
4163-909
4164-909
4064-012
44-00307
44-00307L
4061-012
I.R.
22040943
22040968
22040976
22040984
22041008
22041016
45509932
45509940
45509957
45509965
45509973
45510211
45510229
45510237
45510245
45510252
45510260
45510278
45510286
45510294
45510302
45510369
45510377
45510385
45510393
45510401
45510476
45510484
45510492
45510500
45510518
45510526
45510534
45510542
45510559
45510567
45510575
45510583
45510682
45510690
45510708
45510716
45512480
45512498
45512506
45512514
45512522
45512530
45512548
45512555
45512563
45512571
45512589
45512597
45512605
45512613
45512621
45512639
45512647
45512654
45512662
45512670
45512688
45512696
50050269
50050277
50050285
50050368
50050376
Tamco
44-00308
4071-016
4072-016
4073-018
44-00309
44-00310
4004-120
4004-144
4004-168
4004-084
4004-096
4002-120
4002-144
4002-168
4002-024
4002-036
4002-048
4002-060
4002-072
4002-084
4002-096
4003-120
4003-144
4003-084
4003-096
4003-120
4022-060
4024-036
4024-060
4023-036
4023-048
4023-060
4023-072
4021-024
4021-036
4021-048
4021-060
4021-072
4001-036
4001-048
4001-060
4001-072
4013-120
4013-144
4013-168
4013-084
4013-096
4012-120
4012-144
4012-168
4012-036
4012-048
4012-060
4012-072
4012-084
4012-096
4011-048
4011-060
4011-072
4014-120
4014-144
4014-168
4014-084
4014-096
4011-014
4011-018
4011-024
4012-014
4012-018
I.R.
50050392
50050475
50055524
50055540
50055565
50055573
50055581
50055599
50055680
50055698
50055714
50055730
50055748
50055755
50114883
50185982
50185990
50186014
50187830
50187848
50187855
50187897
50189554
50189562
50189570
50189596
50190404
50191790
50193747
50193754
50193879
50193887
50193903
50193937
50195288
50195296
50195320
50195338
50195353
50195361
50195379
50196385
50196401
50196419
50197805
50197821
50197904
50197912
50197938
50197979
50197987
50197995
50198993
50199207
50199215
50199223
50283183
50283241
50283266
50283506
50283555
50283696
50354596
50712132
50712140
50712728
50712736
50712744
50712751
Tamco
4012-024
4013-014
4013-018
4013-024
4013-036
4013-048
4013-060
4013-072
4014-014
4014-018
4014-024
4014-036
4014-048
4014-060
4023-014
4063-012
4064-012
4074-018
44-00308L
44-0309L
44-00310L
44-01362
4102-016
4103-016
4104-016
4111-016
4062-012
4024-072
4023-024
4023-018
4024-014
4024-018
4024-024
4024-048
4021-014
4021-018
4022-014
4022-018
4022-024
4022-036
4022-048
4004-014
4004-018
4004-024
4002-014
4002-018
4003-014
4003-018
4003-024
4003-048
4003-060
4003-072
4014-072
4001-014
4001-018
4001-024
I.R.
50712975
50713023
50713031
50713049
50713056
51233690
51234052
51234060
51242006
51242014
51242030
51242063
51248300
51248318
51248326
51248334
51248342
51248359
51248367
51248375
51248383
51248391
51248409
51293017
51298107
51299048
51299477
51299485
51299493
51304574
51305639
51305704
51305860
51307155
51356723
44-01432H
44-01435H
44-01415H
44-01416H
44-01418H
44-01434H
44-01430H
44-01436H
44-01437H
44-01417H
44-01419H
44-01420H
401WBC1149
2204-0612
4010SC127
401FC1212
401FC1218
401FC127
401FC129
401FC3412
401FC3418
401FC347
401FC349
401MP12
401MP18
401MP7
401MP9
401OFC1212
401OFC1218
401OFC127
401OFC129
401WBC11412
401WBC11418
401WBC1147
9001-276-12
9001-276-18
9001-276-24
9001-276-36
9001-276-9 1/2
9001-278
9001-279
9001-280
9001-281
9001-282
9001-283
44-01421H 9001-295-12
Tamco
I.R.
Tamco
44-01454H
44-01428H
44-01429H
44-01431H
44-01433H
44-01452H
44-01456H
44-01453H
44-01450H
44-01451H
44-01455H
9001-295-9 1/2 3358-009
9001-297-12 3311-012C
9001-297-18 3311-018C
9001-297-24 3311-024C
9001-297-36 3311-036C
9001-297-9 3311-009C
HTI-150H
HTI-162H
HTI-175H
HTI-187H
HTI-200H
CP2107-07
CP2107-12
CP2107-18
CP2142-07
CP2142-12
CP-2151-07
CP-2151-12
CP-2151-18
CP-2153-07
CP-2153-12
CP-2153-18
CP-2154-07
CP-2154-12
CP-2154-18
FW40810
FW40820
FW40830
FW40840
BT41310
BT41320
BT41330
BT41340
CB40960
44-014531H CB40970
44-0RB22H
44-0RB24H
44-0RB26H
44-0RB28H
44-0RB30H
44-0RB32H
HTI-250H
4003-036
4004-060
4004-036
4004-048
4004-072
4022-072
44-014161H
44-014301H
4011-036
HTI-137H
HTI-225H
4063-012
2204-007
2201-012
2201-018
2201-007
2201-009
2253-012
2253-018
2253-007
2253-009
2211-012
2211-018
2211-007
2211-009
2202-012
2202-018
2202-007
2202-009
2205-012
2205-018
2205-007
2205-009
3301-012
3301-018
3301-024
3301-036
3301-010
3360-009
3361-009
3362-009
3363-009
3364-009
3365-009
3358-012
H3R-214F-12
H3R-214F-18
H3R-214F-24
H3R-214F-36
H3R-214F-48
H3R-214F-60
H3R-214F-72
H3R-214F-84
H3R-214F-9
H3R-214F-96
H3R-214M-12
H3R-214M-18
H3R-214M-24
H3R-214M-36
H3R-214M-9
H3R-214S-12
H3R-214T-9
H3R-215F-12
H3R-215F-18
H3R-215F-24
H3R-215F-36
H3R-215F-48
H3R-215F-60
H3R-215F-72
H3R-215F-84
H3R-215F-9
H3R-215F-96
H3R-215M-12
H3R-215M-18
H3R-215M-24
H3R-215M-36
H3R-215M-9
H3R-215S-12
H3R215T-9
H3R-423-12
H3R-423-18
H3R-423-24
H3R-423-36
H3R-423-48
4131-012
4132-009
4133-009
4134-009
4096-014
4097-014
2107-007
2107-012
2107-018
2142-007
2142-012
2151-007
2151-012
2151-018
2153-007
2153-012
2153-018
2154-007
2154-012
2154-018
4081-017
4082-017
4083-017
4084-017
1701-012
1701-018
1701-024
1701-036
1701-048
1701-060
1701-072
1701-084
1701-009
1701-096
1711-012
1711-018
1711-024
1711-036
1711-009
1742-012
1782-009
1701-012
1601-018
1601-024
1601-036
1601-048
1601-060
1601-072
1601-084
1601-009
1601-096
1611-012
1611-018
1611-024
1611-024
1611-009
1642-012
1682-009
1607-012
1607-018
1607-024
1607-036
1607-048
I.R.
H3R-423-60
H3R-423-72
H3R-423-84
H3R-423-9
H3R-423-96
H3R-424-12
H3R-424-18
H3R-424-24
H3R-424-36
H3R-424-48
H3R-424-60
H3R-424-72
H3R-424-84
H3R-424-9
H3R-424-96
HH1-214F-12
HH1-214F-18
HH1-214F-24
HH1-214F-36
HH1-214F-48
HH1-214F-60
HH1-214F-72
HH1-214F-84
HH1-214F-9
HH1-214F-96
HH1-214M-12
HH1-214M-18
HH1-214M-24
HH1-214M-36
HH1-214M-9
HH1-214S-12
HH1-214T-9
HH1-215F-12
HH1-215F-18
HH1-215F-24
HH1-215F-36
HH1-215F-48
HH1-215F-60
HH1-215F-72
HH1-215F-84
HH1-215F-9
HH1-215F-96
HH1-215M-18
HH1-215M-24
HH1-215M-36
HH1-215M-9
HH1-215S-12
HH1-215T-9
HH1-323-12
HH1-323-18
HH1-323-24
HH1-323-48
HH1-323-60
HH1-323-72
HH1-323-84
HH1-323-9
HH1-323-96
HH1-324-12
HH1-324-18
HH1-324-24
HH1-324-36
HH1-324-48
HH1-324-60
HH1-324-72
HH1-324-84
HH1-324-96
HH1-324-96
HH-215M-12
PF2200-390
Tamco
1607-060
1607-072
1607-084
1607-009
1607-096
1707-012
1707-018
1707-024
1707-036
1707-048
1707-060
1707-072
1707-084
1707-009
1707-096
1501-012
1501-018
1501-024
1501-036
1501-048
1501-060
1501-072
1501-084
1501-009
1501-096
1511-012
1511-018
1511-024
1511-036
1511-009
1542-012
1582-009
1401-012
1401-018
1401-024
1401-036
1401-048
1401-060
1401-072
1401-084
1401-009
1401-096
1411-018
1411-024
1411-036
1411-009
1442-012
1482-009
1407-012
1407-018
1407-024
1407-048
1407-060
1407-072
1407-084
1407-009
1407-096
1507-012
1507-018
1507-024
1507-036
1507-048
1507-060
1507-072
1507-084
1507-096
1507-009
1411-012
1807-007
37
Steel Cross Reference
I.R.
PF2200-390-12
PF2200-390-18
PF2200-390-3
PF2200-390-3-12
PF2200-390-3-18
PF2200-392
PF2200-392-12
PF2200-392-18
PF2200-393
PF2200-393-12
PF2200-393-18
PF2200-394
PF2200-394-12
PF2200-394-18
WB1121518
WB1122124
WB1122730
WB1124548
WB112912
WB1141518
WB1142124
WB1142730
WB1143336
WB1144548
WB114912
WB11518
WB11582124
WB1181518
WB1182124
WB1182730
WB1183336
WB1184548
WB118912
WB12124
WB12730
WB13336
WB1381518
WB1381518
WB1382124
WB1382730
WB1384548
WB138912
I.R.
WBA1142124
WBA1142730
WBA1143336
WBA1144548
WBA114912
WBA11518
WBA11582124
WBA1181518
WBA1182124
WBA1182730
WBA1183336
WBA1184548
WBA118912
WBA12124
WBA12730
WBA13336
WBA1382124
WBA1382730
WBA1384548
WBA138912
44-0194221
WBA1581518
44-030442
44-01940
44-01937
44-01951
44-01961
44-019611
44-019614
44-019359
44-01936
44-01948
44-01950
44-01960
44-01934
44-01935
44-01939
44-01952
44-01949
44-019491
44-019493
44-019371
44-01938
44-01986
44-01987
44-01988
44-01991
44-01980
44-01981
44-01982
44-019822
44-01989
44-01972
44-019884
44-01974
44-01978
44-01979
44-019791
44-01973
44-01976
44-01977
44-01983
44-01984
44-01985
44-01990
44-01971
44-01962
44-019622
44-019623
44-019621
WBA1912
WBA341518
WBA342124
WBA342730
WBA343336
WBA344548
WBA3469
WBA34912
WBA581518
44-0123111 WBA582124
44-00997 WBA582730
44-01232 WBA5869
44-01222 WBA58912
44-012221 WBA781518
44-01947 WBA782124
44-03026 WBA782730
44-03027 WBA783336
44-03028 WBA784548
44-03029 WBA7869
44-03025 WBA78912
WB14548
44-0122211 WBC1121518
44-030441 WBC1122124
44-00994 WBC1122730
44-03037 WBC112912
44-01226 WBC1141518
44-01228 WBC1142124
44-012282 WBC1142730
44-012284 WBC1144548
44-01218 WBC114912
44-01219 WBC11518
44-03033 WBC11582124
44-030331 WBC1181518
WB1912
WB3469
WB34912
WB581518
WB582124
WB582730
WB5869
WB58912
WB781518
WB782124
WB782730
WB783336
WB784548
WB7869
WB78912
WBA1121518
WBA1122124
WBA1122730
WBA112912
WBA1141518
44-0303311 WBC1182124
44-03034
44-02040
44-03038
44-00993
44-01221
44-012211
44-012214
44-00991
44-01229
44-01958
44-01959
44-019591
44-01957
44-01945
Tamco
44-01954
44-019541
44-019542
44-019544
44-01953
44-01941
44-01963
44-01944
44-01946
44-019461
44-019462
44-019464
44-01943
44-01942
44-019421
44-019422
44-01956
44-019561
44-019563
44-01955
WBA14548
WB1581518
WB341518
WB342124
WB342730
WB343336
WB344548
38
Tamco
1807-012
1807-018
1842-007
1842-012
1842-018
1853-007
1853-012
1853-018
1851-007
1851-012
1851-018
1854-007
1854-012
1854-018
44-03044
44-03042
44-03045
44-03046
44-03043
44-01000
44-01224
44-03041
44-030411
44-030413
44-00999
44-03039
44-030474
44-00998
44-01223
44-01231
44-012311
WBC1182730
WBC1183336
WBC118912
WBC12124
WBC12730
WBC1381518
WBC1382124
WBC1382730
WBC138912
WBC1912
WBC341518
WBC342124
WBC342730
WBC34912
I.R.
WBC781518
WBC782124
WBC782730
Tamco
44-019625
44-019626
44-019627
WBC783336
44-0196271
WBC78912
WF-14A-12
WF-14A-18
44-019624
2054-018
2054-012
2054-007
2051-012
2051-018
2051-007
2007-007
2007-012
2007-018
2042-007
2042-012
2042-018
2053-012
2053-018
2053-007
Tamco
1582-211
1482-211
4084-017
4064-012
4104-016
4097-014
4074-018
4111-016
4062-012
4102-016
4095-014
4072-016
4083-017
4063-012
4103-016
4096-014
4073-018
1582-009
1482-009
44-01515T
44-01517T
44-01516T
44-01518T
44-01529T
44-01539T
44-01503T
44-01520T
44-01813T
44-01811T
44-01821T
44-01814T
44-01812T
44-01817T
44-01819T
44-01810T
44-01809T
44-01913T
44-01911T
44-01914T
44-01912T
44-01910T
44-02161T
44-02163T
44-02167T
44-02169T
44-02164T
44-022763
44-022764
WF-14A-6 1/8
WF-14B-11 1/2
WF-14B-18
WF-14B-6 1/8
WF-14C-007
WF-14C-012
WF-14C-018
WF-14D-007
WF-14D-012
WF-14D-018
WF-14F-12
WF-14F-18
WF-14F-7
Pioneer
357
367
1044
1050
1055
1056
1078
1755
1850
1855
1856
1878
1944
1950
1955
1956
1978
3570
3670
7010
7020
7030
7040
7055
7056
7060
7070
7110
7120
7127
7130
7140
7155
7156
7160
7170
7310
7320
7330
7340
7360
7410
7420
7450
7455
7460
7910
7920
Pioneer
8011
8012
8013
8014
8015
8016
8017
8018
8019
8033
8034
8119
10114
10118
10124
10136
10148
10160
10172
10196
10214
10218
10224
10236
10248
10260
10272
10296
10314
10318
10324
10336
10348
10360
10372
10616
10709
10877
10909
10915
17114
17118
17124
17136
17148
17214
17218
17224
17236
17248
17314
17318
17324
17336
17348
17709
18114
18118
18124
18136
18148
18160
18172
18214
18218
18224
18236
18248
18260
Tamco
44-ORB22H
44-ORB24H
44-ORB26H
44-ORB28H
44-ORB30H
44-ORB32H
44-ORB36H
44-ORB40H
44-ORB42H
44-ORB56D
44-ORB64D
44-01507
4014-014
4014-018
4014-024
4014-036
4014-048
4014-060
4014-072
4014-096
4004-014
4004-018
4004-024
4004-036
4004-048
4004-060
4004-072
4004-096
4024-014
4024-018
4024-024
4024-036
4024-048
4024-060
4024-072
4044-016
4134-009
4094-014
44-00294
44-00310L
4011-014
4011-018
4011-024
4011-036
4011-048
4001-014
4001-018
4001-024
4001-036
4001-048
4021-014
4021-018
4021-024
4021-036
4021-048
4131-012
4012-014
4012-018
4012-024
4012-036
4012-048
4012-060
4012-072
4002-014
4002-018
4002-024
4002-036
4002-048
4002-060
Pioneer
Tamco Pioneer
18272
4002-072 36224
18314
4022-014 36236
18318
4022-018 36248
18324
4022-024 36260
18336
4022-036 36272
18348
4022-048 36409
18360
4022-060 36412
18372
4022-072 36418
18709
4132-009 36424
18915
44-00308L 36512
19114
4013-014 41207
19118
4013-018 41212
19124
4013-024 41218
19136
4013-036 41307
19148
4013-048 41312
19160
4013-060 41318
19172
4013-072 41407
19196
4013-096 41412
19214
4003-014 41418
19218
4003-018 41507
19224
4003-024 41512
19236
4003-036 41518
19248
4003-048 41707
19260
4003-060 41712
19272
4003-072 41718
19296
4003-096 42207
19314
4023-014 42212
19318
4023-018 42218
19324
4023-024 42307
19336
4023-036 42312
19348
4023-048 42318
19360
4023-060 42407
19372
4023-072 42412
19616
4043-016 42418
19709
4133-009 42507
19877
4093-014 42512
19915
44-00309L 42518
35109
1511-009 42707
35112
1511-012 42712
35118
1511-018 42718
35124
1511-024 44207
35136
1511-036 44212
35148
1511-048 44218
35160
1511-060 44307
35172
1511-072 44312
35209
1501-009 44318
35212
1501-012 44407
35218
1501-018 44412
35224
1501-024 44507
35236
1501-036 44512
35248
1501-048 44518
35260
1501-060 44707
35272
1501-072 44712
35409
1507-009 44718
35412
1507-012 51109
35418
1507-018 51112
35424
1507-024 51118
35512
1542-012 51209
36109
1411-009 51212
36112
1411-012 51218
36118
1411-018 51706
36124
1411-024 51708
36136
1411-036 51710
36148
1411-048 51712
36160
1411-060 51714
36172
1411-072 51714
36209
1401-009 51810
36212
1401-012 51812
36218
1401-018 51818
Tamco
1401-024
1401-036
1401-048
1401-060
1401-072
1407-009
1407-012
1407-018
1407-024
1442-012
1853-007
1853-012
1853-018
1851-007
1851-012
1851-018
1807-007
1807-012
1807-018
1842-007
1842-012
1842-018
1854-007
1854-012
1854-018
2053-007
2053-012
2053-018
2051-007
2051-012
2051-018
2007-007
2007-012
2007-018
2042-007
2042-012
2042-018
2054-007
2054-012
2054-018
2153-007
2153-012
2153-018
2151-007
2151-012
2151-018
2107-007
2107-012
2142-007
2142-012
2142-018
2154-007
2154-012
2154-018
3211-009C
3211-012C
3211-018C
3201-009
3201-012
3201-018
3260-009
3261-009
3262-009
3263-009
3264-009
3258-009
3311-009
3311-012
3311-018
Steel Cross Reference
Pioneer
51824
52112
52118
52209
52212
Tamco
3311-024
3311-012
3311-018
3301-010
3301-012
Pioneer
651436
651448
651460
651648
651660
Tamco
7004-036
7004-048
7004-060
7005-048
7005-060
Pioneer
36224R
36236R
36248R
36260R
36272R
Tamco
1601-024
1601-036
1601-048
1601-060
1601-072
52218
52224
52706
52708
52710
52712
52714
52716
52810
81012
81018
81024
81030
81036
81048
81060
81072
81096
87312
87318
87324
87330
87336
87348
87360
87372
87396
87412
87418
87424
87430
87436
87448
87460
87472
109210
109212
109214
109216
189210
189212
189214
189216
199210
199212
199214
199216
390107
390112
390118
390207
390212
390218
390307
390312
390318
390707
392207
392212
392218
651018
651024
651224
651236
3301-018
3301-024
3360-009
3361-009
3362-009
3363-009
3364-009
3365-009
3358-009
651672
661236
661648
661672
671436
671460
671660
681436
681460
681660
810120
873120
5171004
5171006
5171008
5171204
5171206
5171208
5171404
5171406
5171408
5271004
5271006
5271008
5271204
5271206
5271208
5271404
5271406
5271408
10907R
35109R
35112R
35118R
35124R
35136R
35148R
35160R
35172R
35209R
35212R
35218R
35224R
35236R
35248R
35260R
35272R
35409R
35412R
35418R
35424R
35512R
3570R
36109R
36112R
36118R
36124R
36136R
36148R
36160R
36172R
36209R
36212R
36218R
7005-072
7603-036
7605-048
7605-072
7404-036
7404-060
7405-060
7404-036
7404-060
7405-060
36409R
36412R
36418R
36424R
36512R
3670R
7070S
7170S
8011CM
8012CM
8013CM
8014CM
8015CM
8016CM
8017CM
8018CM
8020CM
8021CM
8119C
81X24
81X36
81X48
87X24
87X36
87X48
87X72
87X96
Sullair
1607-009
1607-012
1607-018
1607-024
1642-012
1682-009
44-01428H
44-01429H
44-01430H
44-014301H
44-01431H
44-01432H
44-01433H
44-01434H
44-01435H
44-01414H
44-01415H
44-01416H
44-014161H
44-01417H
44-01418H
44-01419H
44-01420H
44-01421H
44-01450H
44-01451H
44-01452H
44-01455H
44-01456H
44-01453H
44-014531H
44-01454H
4164-609
4164-709
4164-809
4164-909
4162-609
4162-709
4162-809
4162-909
4163-609
4163-709
4163-809
4163-909
2211-007
2211-012
2211-018
2201-007
2201-012
2201-018
2205-007
2205-012
2205-018
2205-807
2253-007
2253-012
2253-018
7002-018
7002-024
7003-024
7003-036
44-01436H
44-01422H
3270-010
3273-012
3276-014
3271-010
3274-012
3277-014
3272-010
3275-012
3278-014
3370-010
3373-012
3376-014
3371-010
3374-012
3377-014
3372-010
3375-012
3378-014
44-01352
1711-009
1711-012
1711-018
1711-024
1711-036
1711-048
1711-060
1711-072
1701-009
1701-012
1701-018
1701-024
1701-036
1701-048
1701-060
1701-072
1707-009
1707-012
1707-018
1707-024
1742-012
1782-009
1611-009
1611-012
1611-018
1611-024
1611-036
1611-048
1611-060
1611-072
1601-009
1601-012
1601-018
02250099-965
02250099-966
02250099-967
02250099-968
02250099-969
02250099-970
02250099-971
02250099-972
02250099-973
02250099-974
02250099-975
02250099-977
44-014508T
44-01818T
HTI-137H
HTI-150H
HTI-162H
HTI-175H
HTI-187H
HTI-200H
HTI-225H
HTI-250H
HTI-275H
HTI-300H
44-01504H
44-01430X
44-01431X
44-01432X
44-01430X
44-01431X
44-01432X
44-01434X
44-01435X
Tamco
44-01414H
44-01416H
44-01417H
44-01418H
44-01450H
44-01452H
44-01456H
44-01453H
44-01428H
44-01430H
44-01431H
44-01432H
02250142-930
HTI-137H
HTI-150H
HTI-175H
HTI-200H
HTI-250H
3358-009
HTI-300H
1442-012
1401-036
4001-024
4001-036
0225099-974
44-01430H
2500013-739
1711-009
1854-007
1853-007
4011-014
4011-018
4012-014
4012-018
4013-014
4013-018
4014-014
4014-018
4001-014
02250099-979
02250099-980
02250099-981
02250099-982
02250099-983
02250114-209
02250118-435
02250136-634
02250139-375
02250142-136
250013-663
250013-664
250013-671
250013-672
250013-673
250013-674
250013-675
250013-676
250013-677
250013-678
250013-680
Sullair
250013-681
250013-682
250013-683
250013-684
250013-685
250013-686
250013-687
250013-689
250013-690
250013-691
250013-692
250013-693
250013-694
250013-695
250013-697
250013-698
250013-700
250013-701
250013-702
250013-703
250013-712
250013-717
250013-718
250013-719
250013-720
250013-721
250013-722
250013-723
250013-724
250013-725
250013-726
250013-727
250013-728
250013-730
250013-731
250013-732
250013-733
250013-734
250013-735
250013-736
250013-737
250013-738
250013-740
250013-741
250013-756
250013-757
250013-758
250013-759
250013-760
250013-761
250013-762
250013--763
250013-764
250013-765
250013-766
250013-767
250013-769
250013-770
250013-771
250013-781
250013-782
250013-783
250013-850
250013-851
250013-856
250013-857
250013-862
250013-863
250013-867
Tamco
4001-018
4002-014
4002-018
4003-014
4003-018
4004-014
4004-018
4021-014
4022-014
4022-018
4023-014
4023-018
4024-014
4024-018
4063-012
4064-012
4111-016
4102-016
4103-016
4104-016
4084-017
1401-009
1401-012
1401-018
1501-009
1501-012
1501-018
1601-009
1601-012
1601-018
1701-009
1701-012
1701-018
1411-009
1411-012
1411-018
1511-009
1511-012
1511-018
1611-009
1611-012
1611-018
1711-012
1711-018
1407-009
1407-012
1407-018
1507-009
1507-012
1507-018
1607-009
1607-012
1607-018
1707-009
1707-012
1707-018
3301-010C
3301-012C
3301-018C
3311-010C
3311-012C
3311-018C
44-01840
44-01841
44-01842
44-01843
44-01844
44-01845
44-01846
Sullair
250013-868
250013-870
250013-871
250013-873
250013-874
250013-876
250013-877
250014-815
250015-265
250021-302
250024-566
250024-567
250024-568
250024-569
250026-687
250026-688
250026-689
250026-690
250026-691
250026-692
250026-693
250026-694
250026-695
250026-696
250026-697
250026-698
250026-699
250026-700
250026-701
250026-702
250026-703
250026-704
250026-705
250026-706
250026-707
250026-708
250027-004
250027-005
250027-006
250027-947
250027-953
250027-980
250028-002
250028-003
250028-004
250028-411
250028-412
250028-413
250030-668
250030-669
250030-670
250030-671
250039-805
250039-806
250039-807
250039-808
Vulcan
CR180
CR181
CR182
CR2805
CR2805A
CR2815
CR2815A
CR2825
CR2825A
F0120
F0121
F0122
Tamco
44-01847
44-01848
44-01849
44-01850
44-01851
Vulcan
F0123
F0124
F0125
F0126
F0127
Tamco
1411-024
1411-036
1411-048
1411-060
1411-072
44-01852 F0180
44-01853 F0181
4062-012 F0182
44-01434H F0183
4132-009 F0184
1582-009 F0185
1482-009 F0186
1782-009 F0187
1682-009 F02802
44-03140 F02812
44-03141 F02822
44-03142 F02832
44-03143 F02842
44-03144 F02852
44-03145 F02862
44-03146 F02872
44-03147 F120
44-03148 F121
44-03149 F122
44-03150 F123
44-03151 F124
44-03152 F125
44-01353 F126
44-03160 F127
44-03161 F180
44-03162 F181
44-03163 F182
44-03164 F183
44-03165 F184
44-03166 F185
44-03167 F186
44-01818 F187
44-01819 F240
44-01820 F2802
4021-018 F2812
4013-014H F2822
4061-012 F2832
4131-012 F2842
4133-009 F2852
4134-009 F2862
44-03154 F2872
44-03155 F3813
44-03156 FO120
44-031438 FO121
44-031458 FO122
44-031478 FO180
44-031498 FO181
44-031518 FO182
44-031538 FO183
44-031618 FO240
44-031631 FO2802
Tamco
FO2812
1853-007 FO2822
1853-012 FO2832
1853-018 FO3813
1851-007 G0120
1854-007 G0121
1851-012 G0122
1854-012 G0123
1851-018 G0124
1854-018 G0125
1411-009 G0126
1411-012 G0127
1411-018 G0180
1401-009
1401-012
1401-018
1401-024
1401-036
1401-048
1401-060
1401-072
1407-009
1407-012
1407-018
1407-024
1407-036
1407-048
1407-060
1407-072
1611-009
1611-012
1611-018
1611-024
1611-036
1611-048
1611-060
1611-072
1601-009
1601-012
1601-018
1601-024
1601-036
1601-048
1601-060
1601-072
1682-009
1607-009
1607-012
1607-018
1607-024
1607-036
1607-048
1607-060
1607-072
1642-012
1411-009
1411-012
1411-018
1401-009
1401-012
1401-018
1401-024
1482-009
1407-009
1407-012
1407-018
1407-024
1442-012
1511-009
1511-012
1511-018
1511-024
1511-036
1511-048
1511-060
1511-072
1501-009
39
Steel Cross Reference
40
Vulcan
G0181
G0182
G0183
G0184
G0185
G0186
G0187
G02802
G02812
G02822
G02832
G02842
G02852
G02862
G02870
GO3813
G120
G121
G122
G123
G124
G125
G126
G127
G180
G181
G182
G183
G184
G185
G186
G187
G240
G2802
G2812
G2822
G2832
G2842
G2852
G2862
G2872
G3813
HC112
HC134
HC138
HC158
HC178
HC200
HC212
HC214
HC234
HC300
TH-30
TH-D
WF180
WF181
WF182
WF2805
WF2805A
WF2815
WF2815A
WF2825
WF2825A
418-1
418-1.5
418-2
418-2.5
418-3
418-4
Tamco
1501-012
1501-018
1501-024
1501-036
1501-048
1501-060
1501-072
1507-009
1507-012
1507-018
1507-024
1507-036
1507-048
1507-060
1507-072
1542-012
1711-009
1711-012
1711-018
1711-024
1711-036
1711-048
1711-060
1711-072
1701-009
1701-012
1701-018
1701-024
1701-036
1701-048
1701-060
1701-072
1782-009
1707-009
1707-012
1707-018
1707-024
1707-036
1707-048
1707-060
1707-072
1742-012
HTI-150H
HTI-175H
HTI-137H
HTI-162H
HTI-187H
HTI-200H
HTI-250H
HTI-225H
HTI-275H
HTI-300H
44-01504H
44-01507
2053-007
2053-012
2053-018
2051-007
2054-007
2051-012
2054-012
2051-018
2054-018
44-01414E
44-01415E
44-01416E
44-014161E
44-01417E
44-01418E
Vulcan
520-1
520-1.5
520-10
520-2
520-2.5
520-3
520-4
520-5
520-6
520-8
521-1
521-1.5
521-2
521-2.5
521-3
521-4
521-5
521-6
522-1
522-1.5
522-2
522-2.5
522-3
522-4
522-5
522-6
522-8
522-2EXT
522-3EXT
522-4EXT
522-6EXT
522-8EXT
546
546-12
546-12SP
546-18
546-18SP
546-24
546-24SP
547-12
547-18
547-24
547-30
547-36
548-12
548-18
548-24
548-30
548-36
549-12
549-18
549-24
549-30
549-36
550
550-12
550-12SPL
550-18
550-18SPL
550-24
550-24SPL
550-30
550-30SPL
550-36
551
551-12
551-12SPL
551-18
551-18SPL
Tamco
44-01414H
44-01415H
44-01422H
44-01416H
44-014161H
44-01417H
44-01418H
44-01419H
44-01420H
44-01421H
44-01450H
44-01451H
44-01452H
44-01455H
44-01456H
44-01453H
44-014531H
44-01454H
44-01428H
44-01429H
44-01430H
44-014301H
Vulcan
551-24
551-24SPL
551-30
551-30SPL
551-36
552
552-10
552-12
552-12SPL
552-18
552-18SPL
552-24
552-24SPL
552-30
552-30SPL
552-36
552-5
552-6
552-8
553-12
553-12SP
553-12SPL
553-18
553-18SP
553-18SPL
553-24
553-24SP
553-24SPL
553-30
553-30SP
553-30SPL
553-36
554-12
554-12SP
554-12SPL
554-18
554-18SP
554-18SPL
554-24
554-24SP
554-24SPL
554-30
554-30SP
554-30SPL
554-36
555-12
555-12SP
555-12SPL
555-18
555-18SP
555-18SPL
555-24SP
555-24SPL
555-30
555-30SP
555-30SPL
556-12
556-12SP
556-12SPL
556-18
556-18SP
556-18SPL
556-20SP
556-24
556-24SP
556-24SPL
556-30
556-30SP
44-01431H
44-01432H
44-01433H
44-01434H
44-01435H
44-01430X
44-01431X
44-01432X
44-01434X
44-01435X
44-03034
44-02040
44-01935
44-03033
44-01948
44-030331
44-01950
44-01950
44-01937
44-01951
44-01961
44-019611
44-01938
44-01939
44-01952
44-01949
44-019491
44-01940
44-01941
44-01942
44-019421
44-019422
44-01218
44-01219
44-019621
44-03037
44-01962
44-01226
44-019622
44-01228
44-019623
44-012282
44-00991
44-01229
44-019624
44-03038
44-019625 556-30SPL
Tamco
44-00993
44-019626
44-01221
44-019627
44-012211
44-01230
44-01436H
44-00994
44-01971
44-03039
44-01972
44-01232
44-01976
44-01222
44-01977
44-012221
44-01433H
44-01434H
44-01435H
44-00997
44-01943
44-01973
44-00998
44-01944
44-01974
44-01223
44-01946
44-01978
44-01231
44-019461
44-01979
44-012311
44-00999
44-01953
44-01989
44-01000
44-01945
44-01980
44-01224
44-01954
44-01981
44-03041
44-019541
44-01982
44-030411
44-03025
44-01955
44-01990
44-03026
44-01947
44-01983
44-01956
44-01984
44-03028
44-019561
44-01985
44-03043
44-01957
44-01991
44-03044
44-01958
44-01986
44-019591
44-03042
44-01959
44-01987
44-03045
44-019591
44-01988
Vulcan
557-12
557-24
557-24SP
557-30
560
561
562
563
563-18
564
565
565-18
566
567
567-18
568
569
569-18
569-23
570
571
571-18
572
573
573-18
574
575
575-18
576
577
577-18
578
579
580
581
582
583
584
585
586
587
610-1
610-1.5
610-2
610-3
610-4
610-6
810
812
813
817W
818W
841
844
846
847
848
849
865
867
868
923
923R
924
924R
925
926
926R
934
Tamco
44-030472
44-030474
44-01963
44-030475
44-03140
44-03141
44-03142
44-03143
44-031438
44-03144
44-03145
44-031458
44-03146
44-03147
44-031478
44-03148
44-03149
44-031498
44-031497
44-03150
44-03151
44-031518
44-03152
44-03153
44-031538
44-03160
44-03161
44-031618
44-03162
44-03163
44-031631
44-03164
44-03165
44-03166
44-03167
44-03154
44-03155
44-03156
44-03157
44-031571
44-031572
44-01428D
44-01429D
44-01430D
44-01431D
44-01432D
44-01434D
4082-017
4083-017
4084-017
4093-014
4094-014
4096-014
4097-014
4131-012
4132-009
4133-009
4134-009
44-00308L
44-00309L
44-00310L
4001-014
4001-014H
4001-018
4001-018H
4002-014
4002-018
Vulcan
934R
935
935R
936
936R
937
937R
942
943
945
946
952R
965
968
969
972
972S
982
982S
1011
1011R
1012
1012R
1013
1013R
1014
1014-2
1014R
1019
1019R
1020
1020-2
1020-3
1020R
1023
1023R
1024
1024-2
1024-3
1024R
1030
1030R
1031
1031-2
1031-3
1031R
1034
1034R
1035
1035-2
1035-3
1035R
1040
1040R
1041
1041R
1042
1042R
1043
1043R
1045
1046
1046
1048
1049
1051
1052
4002-018H 1075
4021-014 1077
Tamco
4021-014H
4021-018
4021-018H
4022-014
4022-014H
4022-018
4022-018H
4061-012
4062-012
4071-016
4072-016
4002-014H
44-01352
44-01360
44-01362
4102-016
4102-916
4111-016
4111-916
4011-014
4011-014H
4011-018
4011-018H
4012-014
4012-014H
4012-018
4012-024
4012-018H
4013-014
4013-014H
4013-018
4013-024
4013-036
4013-018H
4014-014
4014-014H
4014-018
4014-024
4014-036
4014-018H
4003-014
4003-014H
4003-018
4003-024
4003-036
4003-018H
4004-014
4004-014H
4004-018
4004-024
4004-036
4004-018H
4023-014
4023-014H
4023-018
4023-018H
4024-014
4024-014H
4024-018
4024-018H
4063-012
4064-012
4064-012
4073-018
4074-018
44-01363
44-01364
4103-016
4104-016
Vulcan
1800
1801
1802
1803
1804
1805
1806
1807
1808
4000
4001
4002
4100
4101
4102
4300
5000
5001
5002
5100
5101
5102
5103
9100
9101
9102
9103
9104
9105
9106
9107
9107-18
9108
9109
9109-18
9110
9111
9111-18
9113
9114
9115
9136
9156
9166
112HS
114ES
118ES
1311S
134HS
138HS
156ES
158HS
178HS
200HS
212HS
214HS
258HS
312DS
400DS
Tamco
4162-609
4162-709
4162-809
4162-909
4163-709
4163-809
4163-909
4164-809
4164-909
3211-010
3211-012
3211-018C
3201-009
3201-012
3201-018C
3258-009
3311-009
3311-012
3311-018
3301-009
3301-012
3301-018
3301-024
44-01840
44-01841
44-01855
44-01856
44-01842
44-01843
44-01844
44-01845
44-018458
44-01846
44-01847
44-018471
44-01848
44-01849
44-018491
44-01851
44-01852
44-01853
4042-016
4043-016
4044-016
44-0RB24H
44-0RB20E
44-0RB18E
44-00294
44-ORB28H
44-0RB22H
44-0RB15E
44-0RB26H
44-0RB30H
44-0RB32H
44-0RB40H
44-0RB36H
44-0RB42H
44-0RB56D
44-0RB64D
Intended Uses of Forged Tools
Moil Points - Narrow Chisel Bits:
These can be used in just about anything as long as they can move through. They are the proper tool to use on
cement. When using in hard work, the extra grade tools are recommended. The Broad Moil Point is probably
the best tool for cement work as there is more wedging action to it.
3” Blade Chisel, Digging Chisels:
Their use is confined to easier working material such as hardpan gravel and the like. Although they might be
used in seamy or shaley rock, they should be used for asphalt cutting.
Asphalt Cutters:
The name of this tool describes its primary use, cutting asphalt. It should be used on soft material becaused of
the size of the blade. It could be used as a sod cutter and in hardpan or any place where there are no rocks.
Clay Spade:
Digging in clay is what this tool was designed to do. It should be used in soft materials where there are no rocks
because of the thin sharp blade.
Frost Wedge:
This tool is used for breaking frozen ground although it may be used wherever a wedge could be driven for splitting action.
Tamper Pads and Sheathing Driver:
These are quite self-explanatory.
Stake Driver / Pipe Driver (two-piece construction)
These tools use detachable or tamper shanks and fit over the outside of the stakes or pipe for driving into the
ground.
Concrete Buster:
This is used for breaking concrete after a hole is drilled. The buster is driven into the hole. This does not work
as well as the rock buster because there are no shims for it to slide on.
Good Safey Practices
Tamco tools are carefully manufactured from quality steel and are properly heat treated. Our tools are
safe to use when used properly. Steel will fatigue if continuously used with dull cutting edges. Dull cutting edges
also prevent work from being done efficiently. The extra energy used to drive dull cutting edges is absorbed by
the steel and contributes to the fatigue of the steel.
To provide good production, tools should be sharpened often. When the original hardened steel cutting
edges are worn away the tools should be ground on a grinding wheel or reforged - then properly heat treated.
Hand-held tools that are struck with a hammer will eventually upset on the head and chip off. Hammers
must strike on the center of the face and tools must be struck on the center of the head to reduce upsetting
and chipping of either the hammer or the tool. Upset edges should be ground off frequently to avoid chips from
breaking off and flying.
Tools and drills with carbide cutting edges should be ground on silicon carbide grinding wheels when the
cutting edges become dull. It is easier to grind often than to grind a large amount of dull carbide later. Drills
should be sharpened regularly after drilling 25 or more holes depending upon the hardness and abrasiveness of
the material being drilled.
Good safety practice is for workmen to use gloves, safety glasses, hard hats, and safety shoes. Use of
these safety items is usually required by utility companies and contracting firms and their good safety practices
are worth following.
Remember - improper use may cause breakage and serious injury.
Stocking Warehouses:
• Chicago, IL
• Hayward, CA
• Chino, CA
• Orange, CA
Manufacturing and Corporate Office:
1466 Delberts Drive
Monongahela, PA 15063
(800)826-2672
(72 4 ) 2 5 8 - 6 6 2 2
(724) 258-6692 Fax
www.tamcotools.com