CSIRO Verification Services Highett, Victoria, Australia +61 (0)3 9252 6000 http://www.activfire.gov.au/ Certificate of Conformity Certificate num. afp - 2889 Registration date 14-Jan-2014 Version Valid until Number Issue date 1 14-Jan-2014 Product designation Simplex, 4099 Series, addressable manual call points (Refer to the Schedule/enclosures for further specified details) Agent/distributor Tyco Fire Protection Products Level 3, 95 Coventry Street, SOUTHBANK, VIC, AUSTRALIA, 3006 Registrant Tyco Fire Protection Products 17 Mary Muller Drive, HILLSBOROUGH, CHRISTCHURCH, NEW ZEALAND, 8022 Producer KAC Alarm Company Limited KAC House, Thornhill Road, North Moons Moat, REDDITCH, WORCESTERSHIRE, UNITED KINGDOM, B98 9ND Conformance criteria and evaluation The Simplex, 4099 Series, addressable manual call points has been evaluated and verified as conforming with the relevant requirements of the following criteria. 1. Australian Standard AS 1603.5-1996, 'Automatic fire detection and alarm systems Manual call points (all requirements other than weathering)' incl. Amdt 1 (August 1998). Limitations/conditions of conformance Limitations/conditions of conformance, where identified on this certificate, are derived from qualifications from evaluation(s) for conformity and/or other related technical documentation. All details with respect to design, assembly and installation instructions and restrictions should be checked against the producer's current technical manual/data sheets and the requirements of the Authority having Jurisdiction. i. ii. Compatibility of this device with new or existing control and indicating equipment should be verified prior to installation. This device has been validated by evaluation when connected to the Simplex 4010ES fire indicator panel (test platform variant of the Simplex 4100ES fire indicator panel). Issued by Page 1 of 2 30-Apr-2015 This certification is issued within the scope of CSIRO Verification Services – Rules governing ActivFire Scheme and is valid only for the product(s) as submitted for evaluation and verification of conformity, subject to the following conditions. • Reference to details, limitations and requirements, where documented as a schedule/enclosure with this certificate. • The Registrant is responsible for their attestation of conformity and ensuring that on-going production complies with the conformance criteria defined in this certificate. • This certificate will not be valid if any changes or modifications are made to the product which have not been notified and validated by CSIRO Verification Services. • This certificate is subject to periodical re-validation upon verification that all requirements, as determined by the conformity assessment body, continue to be satisfactorily met by the Registrant. • This certificate may only be reproduced in its published form, without modification and inclusive of all schedules/enclosures. • Any changes, errors or omissions, must be submitted in writing and if necessary or requested, substantiated with relevant evidence. • Any representations, such as advertising or other marketing related activities or articles shall reflect the correct contents of this certificate and conform with all relevant trade practices .and consumer protection legislation and regulations. • Any terms or conditions of use as applicable to content and documentation as published or accessed through web sites administered by the CSIRO Verification Services. David Whittaker Executive Officer – ActivFire Scheme © CSIRO Australia, 2014 This certificate remains the property of CSIRO and may be subject to amendment, suspension or withdrawal at any time. The validity and authenticity of this certificate can be verified by the certification register located at http://www.activfire.gov.au Schedule to Certificate of Conformity Certificate num. Registration date afp - 2889 Version 14-Jan-2014 Valid until Number Issue date 1 14-Jan-2014 Page 2 of 2 30-Apr-2015 Producer's description The Simplex, 4099 Series, addressable manual call points, with compact communications module, are easily installed to satisfy demanding applications. An integral individual addressable module (IAM) monitors status and communicates changes to the connected control panel via IDNet communications. Technical specification The following details are a representative extract of the technical specification for the Simplex, 4099 Series, addressable manual call points and may be subject to change. Complete and current details should be determined from the designated producer’s technical manual/data sheets. Model Model feature Model 4099-9701 Model 4099-9702 LED status indicator Power and communications Address means Device type Wire connections Storage and operating temperature range Humidity range Ingress protection Color Material Dimensions Circuit type Addressable, IDNet™ IDNet, 1 address per callpoint DIPswitch, 8 position KACPUL Spade terminals -10° to 55° C (14° to 131°F) Up to 95% RH non-condensing IP24D Red, RAL3001 PC/ABS 93 mm H x 89 mm W x 28 mm D (3-5/8” x 3-1/2” x 1-1/16”) Supplementary information Schedule of relevant articles The following schedule is an extract of articles significant and/or related as evidence of conformity. Reference Ident. type Report Number. Datasheet Ident. XF2708/R1 A0001-0006-3 Title / description Evaluation for Conformity of the Simplex Models 40999701 and 4099-9702 Manual Call Points to the requirements of AS 1603.5-1996 Simplex IDNet™ I/O Devices IDNet Communicating Devices, Internal Addressable Manual Callpoint Date issued (or date validated) 18-Dec-2013 Mar-2009 Source CSIRO, Materials Science and Engineering, Fire Systems, AU Tyco Safety Products, MA, US
© Copyright 2024