SIM800H Module Manual Soldering User Guide

SIM800H Module Manual Soldering User Guide
SIM800H Module Manual Soldering User Guide
Document Title:
SIM800H Module Manual Soldering User Guide
Version:
1.14
Date:
2014-05-05
Status:
Release
Document Control ID:
SIM800H Module Manual Soldering User Guide
General Notes
SIMCOM offers this information as a service to its customers, to support application and
engineering efforts that use the products designed by SIMCOM. The information provided is
based upon requirements specifically provided to SIMCOM by the customers. SIMCOM has
not undertaken any independent search for additional relevant information, including any
information that may be in the customer’s possession. Furthermore, system validation of this
product designed by SIMCOM within a larger electronic system remains the responsibility
of the customer or the customer’s system integrator. All specifications supplied herein are
subject to change.
Copyright
This document contains proprietary technical information which is the property of SIMCOM
Limited., copying of this document and giving it to others and the using or communication
of the contents thereof, are forbidden without express authority. Offenders are liable to the
payment of damages. All rights reserved in the event of grant of a patent or the registration
of a utility model or design. All specification supplied herein are subject to change without
notice at any time.
Copyright © Shanghai SIMCom Wireless Solutions Ltd. 2013
SIM800H Module Manual Soldering User Guide
3
05.05.2014
SIM800H Module Manual Soldering User Guide
Contents
1.1
1.2
1.3
1.4
1.5
I, Tools for Manual Soldering ............................................................................... 5
II,The Preparation for Manual Soldering ............................................................... 6
III,Operation Steps for Manual Soldering .............................................................. 6
IV,Manual Disassembly of SIM800H Module (Rework Procedure) ..................... 9
V, Precaution Consideration of Manual Soldering .................................................. 10
SIM800H Module Manual Soldering User Guide
4
05.05.2014
SIM800H Module Manual Soldering User Guide
Declaration
This document is only suitable for SIM800H Module, the following content is using SIM800H
module manual soldering process as an example.
1.1
I, Tools for Manual Soldering
Number
Manual Soldering Tools Name and Picture
1
Heat Gun STEINEL _3483 230~300W
(As shown in Figure 1)
2
Soldering Flux Paste AMTECH RMA-223-UV
(As shown in Figure 2)
Heat Gun Air Nozzle ‘Circular’ Port
3
(As shown in Figure 3)
4
Smoke Absorber HAKKO 493
(As shown in Figure 4)
5
Electric-Static Discharge Wrist strap
(As shown in Figure 5)
6
Electric-Static Discharge Tweezer
(As shown in Figure 6)
7
Development Board SIM800H-TE_V1.02
(As shown in Figure 7)
8
SIM800H Module
(As shown in Figure 8)
9
Soldering Repair Fixture
(As shown in Figure 9)
10
Solder Wire
(As shown in Figure 10)
11
Electric Iron HAKKO 936
(As shown in Figure 11)
12
Soldering Wick
(As shown in Figure 12)
figure 2
figure 1
figure 5
SIM800H Module Manual Soldering User Guide
figure 3
figure 6
5
figure 4
figure 7
05.05.2014
SIM800H Module Manual Soldering User Guide
figure 8
figure 11
1.2
figure 9
figure 10
figure 12
II,The Preparation for Manual Soldering
1. First assemble the Heat Gun ‘Circular’ Air Nozzle Port to the casing of Heat Gun STEINEL
_3483, assemble it along the clamping slot, fix it and prevent shaking; then turn on the Heat
Gun STEINEL _3483 power and Set to II; Turn on the White Light Smoke Absorber, the
distance between Smoke Absorber and the PCBA to be soldered is usually 15cm.
2. Heat Gun STEINEL _3483 Air Outlet temperature, adjust the Heat Gun temperature
regulation button and wind force regulation button, to make the temperature of Air Outlet to
be 390℃ ±10℃,air force to be Step 1, as shown in Figure 13.
3. Pay attention to ESD protection, one must wear Electric-Static Discharge Wrist strap when
contacting PCBA board and components.
4. The position of hand holding Heat Gun handle is shown in Figure 14.
figure 13
1.3
figure 14
III,Operation Steps for Manual Soldering
When manually soldering SIM800H module to SIM800H-TE_V1.02 board,
SIM800H-TE_V1.02 board could be independently placed on the Repair Fixture; In addition,
during the manual soldering process, pay attention to the control of the Heat Gun Handle
position, tweezer position and Heat Gun heating time, to avoid the long time heating which will
cause PCBA delamination.
SIM800H Module Manual Soldering User Guide
6
05.05.2014
SIM800H Module Manual Soldering User Guide
The following test parameters are just for reference:
1. The Heat Gun starting power is in set II, temperature is 390℃±10℃, air force is grade 1,
the soldering time of SIM800H module is about 180S.
2. The Electric Iron temperature setting is 350±10℃.
The correct manual soldering operation process is as following:
Coat the solder pad U101 of SIM800H-TE_V1.02 board evenly with Soldering Flux Paste ---
Coat the solder pad U102 of SIM800H-TE_V1.02 board with Tin---Coat the solder pad of
SIM800H module evenly with Soldering Flux Paste ---Coat the solder pad of SIM800H
module with Tin--- Correctly put the SIM800H module into the U101 frame of
SIM800H-TE_V1.02 board according to the silk screen printing or positioning pad--- Start to
solder SIM800H module with Heat Gun, withdraw Heat Gun after soldering, the solder is
completed.
Instruction of manual soldering operation:
1. Coat the solder pad U101 of SIM800H-TE_V1.02 board evenly with Soldering Flux Paste.
The operation instruction: (as shown in Figure 15,16)
When coating U101 pad with
Coat the solder pad
flux paste, do not put too
U101 with Soldering
much, it should cover all the
Flux Paste
area and be even.
figure 15
figure 16
2. Coat the solder pad U102 of SIM800H-TE_V1.02 board with Tin. The Electric Iron
temperature setting is 360±10℃. The operation instruction: (as shown in Figure 17,18)
When coating U101 pad
Coat the U101 pad
with Tin, do not put too
with Tin by
much on each pad, it
Electric Iron
should be even and
smooth.
figure 17
figure 18
3. Coat the solder pad of SIM800H module evenly with Soldering Flux Paste. The operation
instruction: (as shown in Figure 19, 20)
SIM800H Module Manual Soldering User Guide
7
05.05.2014
SIM800H Module Manual Soldering User Guide
Coat the solder
When coating SIM800L
pad of SIM800L
module pad with flux
module with
paste, do not put too
Soldering Flux
much, it should cover all
Paste
the area and be even.
figure 19
figure 20
4. Coat the solder pad of SIM800H module with Tin. The Electric Iron temperature setting is
360±10℃. The operation instruction: (as shown in Figure 21,22)
When coating SIM800H
Coat SIM800H
module pad with Tin, do not
module pad with
put too much on each pad, it
Tin by Electric
should be even and smooth.
Iron
figure 21
figure 22
5. Correctly put the SIM800H module into the U101 frame of SIM800H-TE_V1.02 board
according to the silk screen printing or positioning pad, prepare to solder. The operation
instruction: (as shown in Figure 23)
The ‘Triangle’ in the
upper left corner of U101
pad is the Origin, it is
marked in the red circle.
figure 23
6. Solder SIM800H module. The Heat Gun Power switch is in set II, the temperature is 400℃,
air force is grade 1, the soldering time of SIM800H module is about 180S. The operation
instruction: (as shown in Figure 24, 25)
Take the Heat Gun handle by the left hand, then make it vertical to the SIM800H module
mother board and revolve the Heat Gun slowly to preheat the module evenly, and keep the whole
welding frame stable. When continuous soldering time is about 130S, if the Tin around the
SIM800H Module Manual Soldering User Guide
8
05.05.2014
SIM800H Module Manual Soldering User Guide
module begins to melt, use the tweezer gently stir the module PCB base board (Slightly stir, the
shift should be smaller than 0.5mm). If the module could not finish reposition automatically, it
means Tin in the heating place is not melted completely, so need to keep heating it with Heat
Gun, until when slightly stirring the module, it could do reposition automatically, then the
module soldering is complete, remove the Heat Gun and turn off power, the manual soldering is
finished.
The operation instruction is as in the following:
Soldering SIM800H
Soldered
module by Heat Gun.
SIM800H module
figure 24
1.4
figure 25
IV,Manual Disassembly of SIM800H Module (Rework Procedure)
When dissembling SIM800H module, the Heat Gun setting is same as the manual soldering (The
Heat Gun Power switch is in set II, the temperature is 400℃, air force is grade 1, the dissembling
time of SIM800H module is also about 180S.) The operation instruction: (as shown in Figure
26, 27, 28, 29)
1. When SIM800H module Tin begins to melt, put one of the tweezer tip into the tiny gap
between SIM800H module bottom part and TE terminal SIM800H-TE_V1.02, slightly and
stably take the SIM800H module.
2. Clipping the SIM800H module with tweezers at the right hand, stably clip it and place on the
surface of the welding frame, let it cool down naturally. The module could not be shaking or
flipping in the whole placing process, otherwise there is a risk that the electrical components
inside SIM800H module will be mislocated, and BGA bridge, which causes the module
damaged by human!
SIM800H Module Manual Soldering User Guide
9
05.05.2014
SIM800H Module Manual Soldering User Guide
Step1:When SIM800H
Step2:Take the
module Tin begins to
module slightly
melt, put one of the
and stably with
tweezer tip under it.
the tweezer.
figure 26
figure 27
Step3:Remove SIM800H
Step4:Cool the
module with the tweezer,
taken-out SIM800H
take away Heat Gun.
module aside, the
dissembly is
complete.
figure 28
figure 29
Caution: The Tin on the pad of dissembled SIM800H module will not be even and smooth
(as in Figure 30), do during REWORK, we need to absorb and remove the leftover Tin by
Soldering Wick before soldering, recoat with Tin to be relatively even and smooth, then
solder manually again.
figure 30
1.5
V, Precaution Consideration of Manual Soldering
1. After using the Heat Gun, it should be placed in the welding frame steadily, and be cautious
that the conduct wire, plastic items and other miscellany will not touch the Heat Gun Air
Nozzle, to avoid burning the wire, and cause electricity leakage accident.
2. When the Heat Gun power is on, the temperature of Heat and Hot Air near the Nozzle is
about 100~450℃ high, so make sure don’t touch Hot Air or the metal part around the
Nozzle, don’t use it near the inflammable gas or material.
3. If you don’t use Heat Gun for a long time, please turn off its power.
SIM800H Module Manual Soldering User Guide
10
05.05.2014
SIM800H Module Manual Soldering User Guide
Contact us:
Shanghai SIMCom Wireless Solutions Ltd
Add: Building A,SIM Technology Building,No.633,Jinzhong Road,Changning
District,Shanghai P.R. China 200335
Tel: +86 21 3252 3300
Fax: +86 21 3252 3301
URL: www.sim.com/wm
HU
UH
SIM800H Module Manual Soldering User Guide
11
05.05.2014