Download Report

Established in 1968, Wheeler Metals has been providing quality service and products to our customers
for over 40 years. Our first location was at 54th and Border in Muskogee, Oklahoma. Growing and
expanding beyond our expectations, we moved to our current location in 1996 at HWY 69 and the
Arkansas River Bridge. In order to serve our customers in surrounding areas, we built two new locations.
The first was at Springfield, Missouri in 2002 and the second was at Rogers, Arkansas in 2004.
Wheeler Metals Muskogee houses 40 acres of new and used steel. We continually add products to
better fit your needs. From pipe and square tubing to welders and metal buildings, we offer a full line of
structural steel, metal building components and fencing material.
Customer satisfaction is our number one priority. We have attentive, friendly staff on hand ready to
answer your questions and guide you in the right direction for all your steel needs. Call us or come out
anytime and we’ll show you why you should “Build it to Last ... Build it with Steel!”
1 1.800.256.5865 (OK) 417.862.5291 (MO) 479.986.8736 (AR) www.wheelermetals.com
Table of Contents
Policies .................................................................................................................................................... 3
Delivery Schedule..................................................................................................................................... 4
Angle ...................................................................................................................................................... 5
Bar Grating .............................................................................................................................................. 8
Beam ....................................................................................................................................................... 6
Channel ................................................................................................................................................... 7
Concrete Accessories .............................................................................................................................. 12
Containers .............................................................................................................................................. 18
Drainage Pipe ........................................................................................................................................ 18
Expanded Metal ....................................................................................................................................... 8
Farm & Ranch ......................................................................................................................................... 10
Fencing ............................................................................................................................................. 11,12
Flat Bar .................................................................................................................................................... 7
Industrial Tools ....................................................................................................................................... 16
Metal Buildings ................................................................................................................................. 23, 24
Metal Building Accessories ...................................................................................................................... 22
Metal Building Products ......................................................................................................................... 21
Metal Homes .......................................................................................................................................... 23
Paint ...................................................................................................................................................... 15
Pipe ....................................................................................................................................................... 17
Plate Steel ............................................................................................................................................... 8
Racing Accessories .................................................................................................................................. 15
Rectangle Tube ........................................................................................................................................ 9
Sheet Metal ........................................................................................................................................... 25
Sheet Metal Color Chart .......................................................................................................................... 26
Sheet Metal Trims ........................................................................................................................ 27, 28, 29
Solid Bar .................................................................................................................................................. 5
Square Tube ............................................................................................................................................ 9
Sucker Rod ............................................................................................................................................... 7
Trailers & Parts ....................................................................................................................................... 16
Truck Beds ......................................................................................................................................... 13,14
Welding Equipment ........................................................................................................................... 19,20
417.862.5291 (MO) 479.986.8736 (AR) 1.800.256.5865 (OK) www.wheelermetals.com 2
DELIVERY REQUIREMENTS
Our minimum order for any delivery is $800.00. All orders must be called in by 10:00a.m. the day before the delivery.
Someone must be present at the delivery location to meet our driver. A semi must be able to get in and out of your
property and you must have a way to unload your material.
RETURN MATERIAL POLICY
Because of the sensitivity of sheet metal and trim, we cannot accept returns on these products. There will be a 10%
restocking fee on all other material. Material must be returned in original condition and accompanied with a sales
receipt within 30 days of the date of purchase. The condition of material will be determined by Wheeler Metals.
STOCKING & PRICING POLICY
Some products listed in the catalog are not kept in stock at all times. Because of market fluctuations, please call
for current pricing and availability. We are continually adding new products. If you have an inquiry on products
not listed, please call.
SPECIAL ORDER POLICY
A 25% deposit will be required on all special order products. Special order materials must be picked up within 20 working
days from the date of order, after which they will be returned to the manufacturer and deposit will be forfeited.
TERMS
Cash, money orders, personalized checks, cashiers check, Visa, Mastercard, and Discover will be accepted. Any credit
purchases at Wheeler Metals will be extended to approved buyers only. Credit applications are available and ample
time must be allowed for processing. Terms are net 30 days.
CUTTING POLICY
Custom cutting is available on large quantity orders for an additional charge. In order to serve you better, please call
ahead so that we may have plenty of time to process your order. We also have half lengths on most new steel products
available for an additional charge.
SALES TAX POLICY
Sales tax is charged on all materials unless a valid tax exemption certificate is presented at time of sale. We must keep
a copy of certificate on file. If proof of exemption is not presented, taxes will be applied.
3 1.800.256.5865 (OK) 417.862.5291 (MO) 479.986.8736 (AR) www.wheelermetals.com
Delivery Schedule
MON & WED
TUES & THURS
WED & FRI
THURS & MON
BartlesvilleAdair
Bache
Ballard
Beggs Afton CanadianChance
Bixby Bernice ChecotahChewey
Boynton
Big Cabin
Council Hill
Colcord
Broken Arrow
Blue Jacket
Crowder
Cookson
Catoosa ChouteauEnterpriseEldon
Claremore CommerceEufaula Flint
Collinsville
Disney
Featherston
Ft. Gibson
Coweta FairlandGowen Gideon
Haskell
Grand Lake
Hartshorne
Hulbert
Morris Grove HeavenerKansas
Mounds Inola IndianolaLeach
Okmulgee
Jay
Keefeton
Locust Grove
Oologah KetchumKeota Lyon
Owasso LangleyKinita Moody
FRI & TUES
Arkoma
Bokoshe
Braggs
Cartersville
Cowlington
Gans
Gore
Milton
Muldrow
Roland
Sallisaw
Vian
Webbers Falls
Porter MazieKiowaOaks ARKANSAS
SapulpaMiami Krebs Okay Alma
Skiatook
Pensacola
Leflore
Park Hill
Branch
Sperry Picher LequirePeggs Caulksville
Tulsa
Pryor
McAlestar
Proctor
Ft. Smith
QuapawOktaha Scraper Greenwood
Salina Onapa StilwellHackett
Spavinaw Panama TahlequahLavaca
Vinita PittsburgWatts Mountainburg
WagonerPocola Welling Mulberry
Welch Porum WestvilleOzark
Poteau
Ratcliff
KANSAS
Quinton
ChetopaRentiesville
Red Oak
Van Buren
MISSOURISavanna
S.W. City
Shady Point
Tiff City
Spiro
Stigler
Talahina
Warner
Whitefield
Wilburton
417.862.5291 (MO) 479.986.8736 (AR) 1.800.256.5865 (OK) www.wheelermetals.com 4
Angle & Solid Bar
Angle
Size
1/2” X 1/2”
3/4” X 3/4”
1” X 1”
1 1/4” X 1 1/4”
1 1/2” X 1 1/2”
2” X 2”
2 1/2” X 2 1/2”
3” X 2”
3” X 3”
3 1/2” X 3 1/2”
4” X 3”
4” X 4”
5” X 3”
6” X 6”
Round Rod
Size
1/4”
5/16”
3/8”
1/2”
9/16”
5/8”
3/4”
7/8”
1”
1 1/2”
2”
Thickness
1/8”
1/8”
1/8”, 3/16”, 1/4”
1/8”, 3/16”
1/8”, 3/16”, 1/4”
1/8”, 3/16”, 1/4”, 3/8”
3/16”, 1/4”
3/16”, 1/4”
3/16”, 1/4”, 3/8”
1/4”
1/4”
1/4”, 3/8”
1/4”
3/8”
Square Bar
Size
3/8”
1/2”
5/8”
3/4”
1”
AVAILABLE IN 10’ & 20’ LENGTHS
5 1.800.256.5865 (OK) 417.862.5291 (MO) 479.986.8736 (AR) www.wheelermetals.com
Beam
I Beam
B
C
A = Size
3” X 5.7#
4” X 7.7#
5” X 10#
6” X 12.5#
8” X 18.4#
A
B = Flange Width (In.)
2.33
2.66
3.00
3.33
4.00
• Available in 20’ & 40’ Lengths
Wide Flange Beam
4” X 13#
Depth Of
Section (In.)
A
4.16
Flange Width
(In.)
B
4.06
Flange
Thickness (In.)
C
0.345
Web Thickness
(In.)
D
0.280
6” X 9#
5.90
3.94
0.215
0.170
6” X 12#
6” X 15#
6” X 16#
6” X 25#
8” X 10#
8” X 13#
8” X 18#
8” X 21#
8” X 24#
10” X 12#
10” X 15#
12” X 14#
12” X 16#
12” X 19#
12” X 26#
14” X 22#
14” X 26#
16” X 26#
18” X 35#
24” X 55#
6.00
5.99
6.28
6.37
7.90
8.00
8.14
8.28
7.93
9.87
10.00
11.91
11.99
12.16
12.22
13.72
13.89
15.65
17.71
23.63
4.03
5.99
4.03
6.08
3.94
4.00
5.25
5.27
6.50
3.96
4.00
3.97
3.99
4.01
6.49
5.00
5.03
5.50
6.00
7.00
0.279
0.260
0.405
0.456
0.204
0.254
0.330
0.400
0.398
0.210
0.269
0.224
0.265
0.349
0.380
0.335
0.418
0.345
0.429
5.000
0.230
0.230
0.260
0.320
0.170
0.230
0.230
0.250
0.245
0.190
0.230
0.200
0.220
0.240
0.230
0.230
0.255
0.250
0.298
0.375
Size
C = Web Thickness (In.)
0.17
0.19
2.14
0.23
0.27
B
D
A
C
• Available in 40’ & 50’ Stock Lengths. Ask About Our 20’, 25’, & 30’ Lengths
417.862.5291 (MO) 479.986.8736 (AR) 1.800.256.5865 (OK) www.wheelermetals.com 6
Flat Bar, Channel, Sucker Rod
Flat Bar
Size
3/4”
1”
1 1/4”
1 1/2”
2”
3”
4”
5”
6”
8”
10”
12”
Sucker Rod
Size
5/8” NR Sucker Rod
5/8” Used Sucker Rod
3/4” NR Sucker Rod
3/4” Used Sucker Rod
7/8” NR Sucker Rod
7/8” Used Sucker Rod
1” NR Sucker Rod
1” Used Sucker Rod
1 1/8” NR Sucker Rod
Length
25'
25'
25' & 30'
25'
25' & 30'
25'
25' & 30'
25'
25' & 30'
Thickness
1/8”, 3/16”,
1/8” , 3/16”, 1/4”, 3/8”, 1/2”
1/8”, 3/16”
1/8”, 3/16”, 1/4”, 3/8”
1/8”, 3/16”, 1/4”, 3/8”, 1/2”, 3/4”, 1”
1/8”, 3/16”, 1/4”, 3/8”, 1/2”, 3/4”, 1”
1/8”, 3/16”, 1/4”, 3/8”, 1/2”, 3/4”, 1”
1/8”, 1/4”, 3/8”, 1/2”, 3/4”, 1”
1/8”, 3/16”, 1/4”, 3/8”, 1/2”, 3/4”, 1”
1/8”, 1/4”, 3/8”, 1/2”, 3/4”, 1”
1/8”, 1/4”, 3/8”, 1/2”, 3/4”, 1”
1/8”, 3/16”, 1/4”, 3/8”, 1/2”, 3/4”, 1”
• Available in 10’ & 20’ Lengths
Channel
Size
1 1/2” X 1/2” X 1/8”
2” X 1” X 1/8”
3” X 3.5#
4” X 4.5#
5” X 6.7#
6” X 8.2#
7” X 9.8#
8” X 11.5#
10” X 15.3#
12” X 20.7#
• Available in 10’ & 20’ Lengths•
Select Sizes Available in 40’ Lengths
7 1.800.256.5865 (OK) 417.862.5291 (MO) 479.986.8736 (AR) www.wheelermetals.com
Plate
Expanded Metal
Smooth Plate
Size
4' X 4'
4' x 8'
4' x 10'
Size
4’ X 8’ X 3/4” #13
4’ X 8’ X 1/2” #16
4’ X 4’ X 1/2” #13
4’ X 8’ X 1/2 “#13
4’ X 4’ X 3/4” #9
4’ X 8’ X 3/4” #9
4’ X 8’ X 1 1/2” #9
4’ X 8’ X 1 1/2” #9
4’ X 8’ X 1 1/2” #6
4’ X 8’ HEAVY 3#
Thickness
16 ga, 14 ga, 12 ga,
11 ga, 10 ga, 3/16”
16 ga, 14 ga, 12 ga, 11ga,
10 ga, 3/16”, 1/4”, 3/8”,
1/2”, 3/4”, 1”
16 ga, 14 ga, 12 ga, 11ga,
10 ga, 3/16”, 1/4”, 3/8”,
1/2”, 3/4”, 1”
Aluminum Floor Plate
Size
4' X 10'
Thickness
16 ga, 14 ga, 1/8”
Floor Plate
Size
4' X 4'
4' X 8'
4' X 10'
Thickness
14 ga, 1/8”
14 ga, 1/8”, 3/16”, 1/4”
14 ga, 1/8”, 3/16”, 1/4”
• We also have 5’, 6’, & 8’ wide material in various lengths and thicknesses….
Bar Grating
Material
1” X 1/8” Bar Grating
1” X 3/16” Bar Grating
1 1/4” X 3/16” Bar Grating
Width
2' & 3'
2' & 3'
2' & 3'
Length
12', 24'
12', 24'
12',24'
• ASK ABOUT OUR VARIOUS SIZES OF
REMNANT PLATE, SOLD BY THE POUND!!
417.862.5291 (MO) 479.986.8736 (AR) 1.800.256.5865 (OK) www.wheelermetals.com 8
Square & Rectangle Tube
Square Tube
Size
1/2” X 1/2”
3/4” X 3/4”
Gauge
16
16, 14
Lengths
20', 24'
20', 24'
Finish
BARE
BARE, PRIMERED
1” X 1”
16, 11
20', 24'
BARE
14
16, 11
14
16, 11
14
16, 11, 3/16”, 1/4”
14
14, 11, 3/16”
14, 11
3/16”, 1/4”
14, 11
3/16”, 1/4”
20', 24'
20', 24'
20', 24'
20', 24'
20’, 24'
20', 24'
20’, 24'
20', 24'
20', 24'
20’, 24'
20', 24'
20', 24'
BARE, PRIMERED
BARE
BARE, PRIMERED
BARE
BARE, PRIMERED
BARE
BARE, PRIMERED
BARE
BARE, PRIMERED
BARE
BARE, PRIMERED
BARE
1 1/4” X 1 1/4”
1 1/2” X 1 1/2”
2” X 2”
2 1/2” X 2 1/2”
3” X 3”
4” X 4”
• Some Sizes Available in 30’ & 40’ Lengths
Rectangle Tube
Size
1” X 2”
Gauge
14
11
Lengths
20', 24'
20', 24'
Finish
BARE, PRIMERED
BARE
1 1/2” X 3”
14
20’, 24', 40'
BARE, PRIMERED
11
14
11
14
11
14
11
20’, 24'
20', 24'
20’, 24'
20', 24'
20', 24'
20', 24'
20', 24'
BARE
BARE, PRIMERED
BARE
BARE, PRIMERED
BARE
BARE, PRIMERED
BARE
2” X 3”
2” X 4”
2” X 6”
• Select Sizes Available In 30’ Lengths
9 1.800.256.5865 (OK) 417.862.5291 (MO) 479.986.8736 (AR) www.wheelermetals.com
Farm & Ranch
Cattle Equipment
FARM GATES
Powder River Squeeze Chutes Manual Or Auto Headgate Options
3 C Digital Counting Cattle Feeders
6' X 16' Cattle Guard - 25 Ton
10 ft. All Metal Feed Trough
Feeder Rings
8 Ft.
10 Ft.
12 Ft.
14 Ft.
16 Ft .
Arch Gate Options Available
Wire Panels
Corral Panels
50” X 16' Combo Panel
50” X 16' Stock Panel
34” X 16' Hog Panel
4' X 20' Horse Panel - 2” X 4” & 4” X 4”
5' X 20' Horse Panel - 2” X 4” & 4” X 4”
5' X 10'
5' X 12'
5' X 16'
Continuous Fence
Maintainers
5’, 6’, 7’, 8’
4' X 20' - 6 Bar
Hay Handling
Replacement Hay Spears
Hydraulic Hay Spear Units
Hydraulic Pumps
417.862.5291 (MO) 479.986.8736 (AR) 1.800.256.5865 (OK) www.wheelermetals.com 10
Fencing
Barbed Wire
Fencing Cable
2 Pt. -12 3/4 Barbed Wire - 1320'/Rl
4 Pt. - 12 3/4 Barbed Wire - 1320'/Rl
Barbless Wire - 1320'/Rl
3/8” X 7 Strand Guy Wire
5/16” X 7 Strand Guy Wire
1/4” x 7 Strand Guy Wire
T-Posts
6 Ft. X 1.25# - Red Or Green
Pipe Caps
1 5/8”
1 7/8”
2 3/8”
2 7/8”
3 1/2”
4” OD
4 1/2”
5 1/2”
6 5/8”
Pre-Cut Pipe Post
2 3/8” - 7' & 8'
2 7/8” - 7' & 8'
3 1/2” - 7' & 8'
4 1/2” - 7', 8', & 9'
Cable Clamps
1/2”
1/4”
3/8”
5/16”
Cable Wraps
3/8”
5/16”
Accessories
Fence Springs
Flat Hinges
Barrell Hinges
Turnbuckles
Fence Stays
90 Degree Elbows
Small & Large Fence Clips
11 1.800.256.5865 (OK) 417.862.5291 (MO) 479.986.8736 (AR) www.wheelermetals.com
ORNAMENTal Fencing
Spear & Ball Top Caps
Plastic Plugs For Square Tube
1/2"
3/4"
1/2"
3/4"
1"
1 1/4"
1 1/2"
2"
Square Post Ball & Flat Caps
1 1/2"
2"
2 1/2"
3"
4"
SMALL HORSE HEAD
LARGE HORSE HEAD
TUBING RINGS
5" CAST IRON LETTERS
Concrete Accessories
Rebar
Description
3/8” #3 Rebar - 20 Ft.
1/2” #4 Rebar - 20 Ft.
5/8” #5 Rebar - 20 Ft.
Accessories
TIE WIRE
TIE WIRE REELS
BAR TIES
FORM STAKES
PLASTIC CHAIRS
CONCRETE MIX
Concrete Wire 6 X 6 X 10/10 - 5’ X 150’
Grade
40 & 60
40, 60, & No Grade
40, 60, & No grade
king
c
e
D
e
s
Purpo GA - 20 GA)
i
t
l
u
M
(18
0’
3’ X 2
Great For:
Roofing
Bridges
Wind Breaks
Guard Rail Substitutes
417.862.5291 (MO) 479.986.8736 (AR) 1.800.256.5865 (OK) www.wheelermetals.com 12
TRUCK BEDS
Model NS
Ranch Hand
• Headache rack with formed gussets,
sunshades, and sealed beam lights
• Headache rack with rounded corners, sunshades, and 4 sealed beam lights
• Spring loaded fuel doors
• Fully skirted with a 10 ga. smooth plate, 2” fenders,
running boards, exterior stake pockets and rub rails
• Rear hitch and gooseneck box
• 2 recessed tool boxes in front of wheels
• Recessed clearance lights and license plate box
• 1/8” tread plate floor
• DuPont IMRON paint
• 4 recessed sealed beam taillights, clearance lights and license plate box
• DuPont HYBRID corlar epoxy primer – CENTURI 500
high gloss acrylic urethane enamel paint
Rough Rider
Hydraulic Arm
Bale Bed
• Headache rack with formed gussets,
sunshades, and sealed beam lights
• Headache rack with rounded corners, sunshades, and 4 sealed beam lights
• Spring loaded fuel doors
• Fully skirted with a 10 ga. smooth plate, 2” fenders, running boards
• 1/8” tread plate floor and tail section with sealed beam lights
• 2 recessed tool boxes in front of wheels
• Rear hitch and gooseneck box
• 1/8” tread plate floor
• Two durable hydraulic arms with spinners for unrolling hay
• Reinforced gooseneck trough and rear dovetail
• Electric over hydraulic pump with all hoses and fittings
• 4 recessed sealed beam taillights, clearance lights and license plate box
• DuPont IMRON paint
• DuPont HYBRID corlar epoxy primer – CENTURI 500
high gloss acrylic urethane enamel paint
13 1.800.256.5865 (OK) 417.862.5291 (MO) 479.986.8736 (AR) www.wheelermetals.com
Bale Bed
Foreman
• Headache rack with formed gussets, sunshades, and sealed beam lights
• Spring loaded fuel doors
• 1/8” tread plate floor and tail section
• Rear hitch and gooseneck box
• Set of removable hardened super spears which can be stored beneath the bed
• 2- way electric over hydraulic pump that powers
2 – 3” X 10” hydraulic cylinders, and all hoses and fittings
• DuPont IMRON paint
• Headache rack with rounded corners, sunshades, and 4 sealed beam lights
• Fully skirted with a 10 ga. smooth plate, 2” fenders, running boards
• 2 tall side opening boxes in front, 2 underbody boxes
in back, and 2 top opening boxes on top of floor
• 1/8” tread plate floor
• 4 recessed sealed beam taillights ,
clearance lights and license plate box
• DuPont HYBRID corlar epoxy primer – CENTURI 500
high gloss acrylic urethane enamel paint
Grille Guards
Standard Full Bumper Replacement
Deweze
Combine rugged off-road style with heavy duty
protection for your truck. We have models available
to fit your Ford, Chevy, GMC, or Dodge truck.
Standard Grille Guard
The DewEze was designed for optimal feed effciency.
It has the capabilities of multiple bale hauling and unrolling.
Additional Bed Models Available: Field Service – Oil Field • Platform Stake • Firebed • Custom
417.862.5291 (MO) 479.986.8736 (AR) 1.800.256.5865 (OK) www.wheelermetals.com 14
Racing Accessories
Aluminum
Roll Cage Tubing
Black
Flat Black
Red
White
Pepsi Blue
Chevron Blue
Orange
Yellow
Clear Satin
Bright Clear
1 1/4”
1 1/2”
1 3/4”
Race Car Pipe
3/4”
1”
Paint
Paint
Paint
Available In 1 Gallon Cans
Or 5 Gal Buckets
Rust Tough Tan Enamel
Rust Tough White Enamel
Rust Tough Gloss Black
Rust Tough Semi Gloss Black
Red Oxide Primer
Gray Oxide Primer
White Enamel
Aluminum
Gloss Black
Implement Green - 1 Galllon Only
Dark Green - 1 Gallon Only
Walnut Brown - 1 Gallon Only
Safety Red - 1 Gallon Only
Safety Blue - 1 Gallon Only
Safety Yellow - 1 Gallon Only
Safety Orange - 1 Gallon Only
Paint Accessories
Spray Paint
Rollers
Trim Brushes
Paint Mitts
15 1.800.256.5865 (OK) 417.862.5291 (MO) 479.986.8736 (AR) www.wheelermetals.com
TRAILERS & PARTS
Utility Trailers
5' X 10' Standard Trailer
5' X 10' Tilt Trailer
6' X 10' Standard Trailer
16' Utility Trailer / Angle Rails
16' Utility Trailer / Pipe Rails
18' Car Hauler W/ Ramps
Gate Options Available
AXLES
AXLE ACCESSORIES
LIGHTS
FENDERS
TIRES & WHEELS
JACKS
COUPLERS
RECEIVER HITCHES
PLUGS
Industrial Tools
POWER TOOLS
MAKITA CHOP SAW
CHOP SAW BLADES
GRINDER BLADES
MAKITA GRINDER KITS
MAKITA SCREW GUN
MAKITA NIBBLER
DEWALT SHEAR
MAKITA 7 1/4” METAL CUTTER
HAND TOOLS
STRONG HAND TOOLS
TIN SNIPS
417.862.5291 (MO) 479.986.8736 (AR) 1.800.256.5865 (OK) www.wheelermetals.com 16
Pipe
14 ga. Round Tube
Material
1”
1 1/4”
1 1/2”
1 5/8”
1 7/8”
2 3/8”
Lengths
20', 24'
20', 24', 32'
20', 24'
20', 24'
20', 24', 32'
21', 24', 32'
Used Pipe
New Pipe
Material
1.050
1 5/16”
1 5/8”
1 7/8”
2 3/8”
2 7/8”
3 1/2”
4 1/2”
6 5/8”
Thickness
.100W
.115W
.120W
.120W
SCH 30, SCH
35, SCH 40
.145W, .188W
.188W
.200W
.250W
Lengths
20'
21', 24'
21', 24'
21', 24', 32'
2 3/8”
2 7/8”
3 1/2”
4 1/2”
21', 24', 32'
21', 24', 32'
21', 24', 32'
21', 24', 32'
21', 24', 32'
Spiral Weld Pipe
Sizes Starting At 36” Through 110” Diameters
Various Lengths & Thicknesses
Sign Quality Pipe
Sizes Starting At 10 3/4” Diameters
Various Lengths & Thicknesses
Road Bore Pipe
10” - 36” Diameters Available
Various Lengths & Thicknesses
ASK ABOUT OUR 1 1/2” & 2 3/8”
OVAL PIPE!!
17 1.800.256.5865 (OK) 417.862.5291 (MO) 479.986.8736 (AR) www.wheelermetals.com
Drainage
Galvanized Tinhorns
Size
12”
15”
18”
24”
30”
36”
Length
10', 16', 20', 24'
10', 16', 20', 24'
10', 16', 20', 24'
10', 16', 20', 24'
10', 16', 20', 24'
10', 20'
We also stock connecting bands for 12” - 36” diameters.
Special order sizes and end sections are available upon request.
DRAINAGE PIPE
DIAMETERS STARTING AT 8” THROUGH 36”
• GREAT FOR DRIVEWAYS, CREEK CROSSINGS, & POND DAMS
CONTAINERS
20’ & 40’
417.862.5291 (MO) 479.986.8736 (AR) 1.800.256.5865 (OK) www.wheelermetals.com 18
Welding equipment
Ranger 225
A great choice for getting the job done! For construction contractors, maintenance
crews, farmers or ranchers, the Ranger® 225 does a variety of basic welding jobs.
And with 10,500 watts of peak AC generator power, it handles a variety of other
jobs: lights, grinder, Lincoln Electric inverter, plasma cutter (separate air supply
needed) or emergency power.
Ranger 250 GXT
Get all of the XTras needed for construction and maintenance work. That’s XTra
welding performance with 250 amps for AC or DC stick and DC wire welding and XTra
power with up to 11,000 watts peak for lights, grinders or high amperage equipment.
You also get XTra protection and quiet operation with the Lincoln enclosed case.
Vantage 300
The Vantage® 300 is an ideal choice for construction teams, pipe rig owners and rental
fleet managers. Housed in a compact, corrosion resistant stainless steel case, this rugged
welder/generator features Lincoln® Chopper Technology® to deliver great arc starts and a
smooth arc for stick, TIG or wire welding. The quiet, smooth-running 1800 rpm watercooled 4-cylinder Kubota® or Deutz® diesel engine generates 12,500 watts of 3 Phase or
11,500 watts of 1 Phase auxiliary power.
Steelworker Torch Kit
Twin Hoses & Regulators
Electrodes & MIG Wire
19 1.800.256.5865 (OK) 417.862.5291 (MO) 479.986.8736 (AR) www.wheelermetals.com
AC/DC 225
Power Mig 140c
The AC/DC 225/125 is an arc
welding power source with an
AC welding output range of
40-225 amps and a DC welding
output range of 30-125 amps.
It is an extremely useful stick
welding power source for
maintenance repair, fabrication,
construction, erecting and
hardfacing applications.
Home projects and repair, sheet metal autobody
work, farm and small shop welding - the Power
MIG® 140C designed for 120 volt household
power does it all! Use the continuous voltage
control to precisely dial in the settings that some
thin sheet metal and aluminum applications
require for optimal results.
Power MIG 180C
Power Mig 216
The POWER MIG® 216 offers the autobody and
sheet metal fabrication industries top welding
performance with a host of professional features:
• Diamond Core Technology™ – Delivers a
forgiving arc, excellent out-of-position arc
action, low spatter and a wide voltage sweet
spot for steel, stainless steel or aluminum.
• MAXTRAC® Cast Aluminum Industrial Wire Drive –
Features dual driven rolls, regulated wire feed speed
control, brass-to-brass connections and Lincoln’s
100% wire supporting split wire guide system.
Whether you’re a farmer or a fabricator, an
autobody shop or a backyard mechanic, the
Power MIG® 180C will help you get the job done!
It’s a portable wire welder designed for use with
industrial 230 volt input power, so you can weld
on thicker material - up to 3/16” with MIG welding
and 1/2” with gas-less flux-cored welding.
Port-A-Torch
Contains all the quality equipment
needed for cutting, welding and brazing
in a rugged molded plastic carrying case.
The outfit is designed to carry one MC
acetylene cylinder and one 20 cu. ft.
oxygen cylinder. As supplied, the outfit
is capable of cutting to 1” and welding to
1/16”. Can cut to 4” and weld to 1/2” with
larger tips and acetylene cylinders.
417.862.5291 (MO) 479.986.8736 (AR) 1.800.256.5865 (OK) www.wheelermetals.com 20
METAL BUILDING PRoducts
Base Angle
2 “ X 2 “ X 14 Ga
3 “ X 2” X 14 Ga
4” X 2” X 14 Ga
** Available In
20' & 25' Lengths
Zee Purlin
Size
4" X 2" X 14 Ga
6" X 2" X 14 Ga
8" X 2 1/2" X 14 Ga
Length
21', 26'
22', 27'
22', 27', 30'
Cee Purlin
All Sizes Available In
20', 25', & 30' Lengths
3” X 1 1/2” X 14 Ga
4” X 1 1/2” X 14 Ga
4” X 2” X 14 Ga
6” X 2” X 14 Ga
8” X 2 1/2” X 14 Ga
10” X 2 3/4” X 14 Ga
Receiver Channel
Available In
20' & 25' Lengths
4 3/16” X 2” X 14 Ga
6 3/16” X 2 1/2” X 14 Ga
8 3/16” X 3” X 14 Ga
TRUSSES
20'
24'
30'
40'
21 1.800.256.5865 (OK) 417.862.5291 (MO) 479.986.8736 (AR) www.wheelermetals.com
Metal Building Accesories
Doors
3/0 X 6/8 DOOR Pre-Hung with 3 1/2” Jamb
3/0 X 7/0 DOOR WITH 4” OR 8” JAMB
4/0 X 7/0 DOOR WITH 4” OR 8” JAMB
6/0 X 7/0 DOOR WITH 4” OR 8” Jamb
Insulation
Screws
3” X 36” X 104’ VINYL BACK
3” X 48” X 104’ VINYL BACK
4’ X 125’ DOUBLE BUBBLE
¾” METAL TO METAL
7/8” METAL TO METAL
1 ¼” METAL TO METAL
1 ½” METAL TO WOOD
Tape
ALUMINUM FOIL TAPE
TACKY TAPE
PATCH TAPE
DOUBLE BACK TAPE
Pipe Flashings
1 ¼” – 4”
4” – 7”
6” – 11”
10” – 18”
417.862.5291 (MO) 479.986.8736 (AR) 1.800.256.5865 (OK) www.wheelermetals.com 22
EZ TRUSS BUILDING KITS
Do It Yourself!
Service – Quality – Value
If you are looking for a pre-fabricated metal building for business or for your home,
Wheeler Metals has the answer. We offer several different sizes in a complete package that
you can erect yourself. All kits are designed for easy installation and all are manufactured
with a 2:12 pitch roof that gives more head room, better roof drainage, and a better
looking building. Every building is 100% steel.
Kit includes – Bolt together trusses, all steel frame, factory painted purlins, and angle
clips for easy installation of purlin. Numerous options are available that make our EZ Truss
Building Kits easy on you and your pocket book.
Call or come by for a visit and let us put
you in an all steel building that IS affordable and looks great!
METAL HOME PACKAGES
100% Steel Roofs and Walls!
As a division of Wheeler Metals, Inc., the metal home package brings you a level of quality
and service that beats the rest. We manufacture your Metal Home Packages at our Muskogee,
OK facility, not just broker them from someone else. Manufactured by our team, in our
warehouse means no middleman and produces a metal home package on time, with a higher
quality product at a great value.
Steel possesses the higher strength to weight ratio of any building material being utilized
today. It remains one of the strongest, most durable, and economical manufactured metals.
It is no wonder that over 80% of all commercial buildings constructed today use steel as their
primary structural component.
Years from now, a metal home will be just as straight, sturdy, and beautiful as it was the day
construction was completed. With most metal homes we sell, the steel frame fully supports
the structure, therefore it is not mandatory to have interior load bearing walls. This allows for
wide, spacious rooms without columns getting in your way. No ordinary wood frame home
offers that kind of design flexibility.
Construction is made simple with our manufactured trusses, pre-cut studs, and receiver
channel system that most any builder can erect. This is a cost-effective solution to a new
home that is rigid construction, energy efficient, termite proof, fire proof, and virtually
maintenance free that delivers a lifetime of superior performance.
23 1.800.256.5865 (OK) 417.862.5291 (MO) 479.986.8736 (AR) www.wheelermetals.com
PRE-ENGINEERED METAL BUILDING
Wheeler Metals, Inc. is proud to offer a
complete line of metal building systems for
commercial, agricultural, industrial, warehouses,
workshops, or personal use. Pre-engineered
and engineer stamped drawings are available
because we have an on staff engineer to provide
practically any application work for you. From
shops to garages, to barns and air plane hangars,
pre-engineered, bolt together buildings make it
possible for the home owner to “build it to last…
build it with steel.” An in house, experienced
design team can also help create the Wheeler
Metal Building you’ve been wanting.
An 18,000 square foot, modern, on site,
state-of-the-art fabrication facility, that features
CNC machinery, ensures quality that you expect.
We are committed to supply a top quality metal
building with a lifetime of superior performance
that is virtually maintenance free.
Wheeler Metals is quickly developing a strong
name as a leader in the metal building industry.
We know that when you need a metal building,
you want it fast, affordable, and with the quality
and service that you deserve. Wheeler Metals is
dedicated to providing first rate customer service.
We understand the importance of repeat business,
so we strive to satisfy all your needs. No sales
gimmick, no high pressure, just a quality steel
building at a great price.
CALL OR VISIT ANYTIME!
417.862.5291 (MO) 479.986.8736 (AR) 1.800.256.5865 (OK) www.wheelermetals.com 24
Sheet Metal
“We are the Manufacturer”
Wheeler Metals, Inc. is proud to announce its success in the metal roofing and siding division. We have expanded to a 30,000
square foot facility specially designed and equipped to efficiently produce all your Metal roofing and trim requirements.
We use the latest technology to produce our panels and trim
profiles to meet high standards, insuring you always get
the highest quality product. We also have the capabilities
to custom design and produce special trim shapes for your
non-standard applications.
We also offer coil sales to our customers who roll form their
own panels. We can provide you (1) coil, mixed load coils
with structural, or entire truck loads of coils from our 4,000
plus tons of coil inventory. Our prime material meets the
strict requirements of UL 790, UL 2218 Class 4 and UL 580.
Most all of our colors meet the Energy Star ratings. We
also carry commodity and non-warranty material for those
looking for the best price and function.
Call us with your metal needs!!!
25 1.800.256.5865 (OK) 417.862.5291 (MO) 479.986.8736 (AR) www.wheelermetals.com
Trim Colors
Polar White
Beige
Desert Beige
Emerald Green
Royal Blue
Patriot Red
Burgundy
Coca Brown
Clay
Charcoal
XA3G 41342
XH3G 41942
XA3G 41335
Burnished Slate
XN3G 41338
XP3G 43846
XR3G 41331
Ash Grey
XR3Y 45511
XL3G 42748
XL3G 41337
Country Red
XG3G 41344
XT3G 41336
XT3G 41329
Hawaiin Blue
XH3G 42083
XH3G 42083
XW3G 41328
Sahara Tan
Beige
Ebony Black
XS3G 41339
XS3G 41339
417.862.5291 (MO) 479.986.8736 (AR) 1.800.256.5865 (OK) www.wheelermetals.com 26
R-PANEL TRIM
27 1.800.256.5865 (OK) 417.862.5291 (MO) 479.986.8736 (AR) www.wheelermetals.com
Low Rib Trim
417.862.5291 (MO) 479.986.8736 (AR) 1.800.256.5865 (OK) www.wheelermetals.com 28
Gutters
29 1.800.256.5865 (OK) 417.862.5291 (MO) 479.986.8736 (AR) www.wheelermetals.com
NOTES
417.862.5291 (MO) 479.986.8736 (AR) 1.800.256.5865 (OK) www.wheelermetals.com 30