FOR IMMEDIATE RELEASE Contact: ACD W. Scott Fillebrown, President & CEO [email protected] 972-664-0900 Web site: www.ACDUSA.com MIRTEC MV-7xi Demos Are Now Offered at ACD’s Facility in Richardson, TX RICHARDSON, TX ― October 2014 ― ACD, a full-service EMS company, is pleased to welcome MIRTEC customers to its facility for demonstrations. With its two MV-7xi In-Line AOI systems from MIRTEC, ACD offers its customers confidence in receiving quality, defect free assemblies. ACD has benefitted from superior lifted lead detection for gull wing devices, four-point height measurement capability for co-planarity testing of BGA and CSP devices and enhanced solder paste measurement capability. MIRTEC’s MV-7xi In-Line AOI machines are configured with the exclusive 10 Mega Pixel ISIS Vision System. This revolutionary optics system is comprised of a 10 Mega Pixel Top Down camera and a Precision 13.4 Micron Telecentric Compound Lens. The systems also are configured with Four (4) Ten Mega Pixel Side-View Cameras, a 2D camera bar code reader, a high-throughput, threestage PCB conveyor and a PCB under board support system. For more information about MIRTEC’s MV-7xi In-Line AOI System, visit www.mirtecusa.com. For more information about ACD’s services, which include complete board layout services, DFM/DFA capability, printed circuit fabrication, component procurement, SMT and thru-hole build, rework, X-ray, flying probe, functional test and more, visit www.ACDUSA.com. ### Scott Fillebrown, President of ACD, and Brian D’Amico, President of MIRTEC About ACD Founded in 1984, ACD is an AS9100 and ISO 13485 certified full service EMS company. The company’s services comprise complete board layout, DFM/DFA capability, printed circuit fabrication, component procurement, thru-hole, SMT and part-on-part mixed technology assembly, box build, rework, flying probe, functional and JTAG test, and development. For more information, visit www.ACDUSA.com. 1250 American Parkway (972) 664‐0900 ∙ Fax (972) 690‐6234 www.ACDUSA.com
© Copyright 2024