reflex ’Hot water heater’ Because your family deserves the best!
reflex ’Hot water heater’ Because your family deserves the best! reflex ’Hot water heaters’ Fulfill all wishes Energy saving is higher on the agenda than ever before. Improved standard of living has led to increasing hot water demand. House owners insist more and more on having a dependable, efficient and energy saving water heating system which gives them the most for their money and plentiful supplies of hot water anywhere at anytime. The reflex glass-lined Hot water heaters are an outstanding example in this respect, as in addition to a whole range of capacities, they offer outstanding performance and exceptional convenience without leaving out aspects such as long service life and economy. Suitable for domestic water heating, solar applications as well as heavy duty hot water requirements in sport accommodations, hotels, schools, factories, etc. Quality „made by Reflex“: Glass-fused-to-steel: tank protection for life 2 heavy duty S235JRG2 (RSt 37-2) quality steel corrosion resistant glass-lined tank according to German DIN 4753 standards well-positioned glass-lined heat exchanger for optimal heat transfer large heating surface for quick heating recovery magnesium anode rod for additional protection reflex ’Hot water heater’ – because your family deserves the best! numerous models of hot water heaters for heating and solar systems from 100 up to 2.000 litres available 5 year warranty on glass-lined tank max. operating pressure: Heating circuit water - 16 bar Solar circuit - 16 bar - 10 bar Potable water extra thick insulation available in 4 colours minimize energy losses and lower operating costs large variety of accessories practical packaging for efficient transportation reflex ’SB/SF Hot water heater’ reflex ’SF/2 Solar hot water heater’ reflex ’SF Indirect hot water heater’ 120 ltr reflex ’US Horizontal hot water heater’ reflex ’LS Hot water storage tanks’ reflex ’Hot water heaters’ Perfect quality and technology Protection anode optimal protection against corrosion maintenance free power anode available as accessory Circulation connection for the separate integration of the circulation pipe Heating coil large heating surface for quick recovery period heating coil designed to prevent the formation of cold zones and thus contamination with bacteria for ’LS Hot water storage tank’ without heating surface for storage charging systems Pocket tube for holding a temperature sensor for the measurement of the water temperature in the storage tank, not at the vessel wall for ’SB/2 and SF/2 Solar Hot water heater’ one pocket tube per heating spiral for ’LS Hot water storage tanks’: 2 sensor locations are provided for differential temperature regulation Impact plates avoid turbulences by the fresh water that continues flowing indispensable for an optimum storage charge and a stable stratification „reflex ’Hot water heaters’ – perfect quality and technology, of course! And with the variety in size, model and colour I can offer the customer exactly what he needs.“ Glass-lined tank steel and glass are fused together to achieve the best of both materials - the strength and engineering flexibility of steel and the corrosion resistance of glass 1st class water with respect to hygiene and taste smooth glass-lined which prevents formation of lime deposits on surface Insulation / Jacket extra thick Polyurethane insulation (CFC-free) for minimum heat loss steel jacket available in 4 colours to suit each boiler combination: from 750 ltr and above, insulated jacket in soft foam will delivered in additional package Inspection hole from 150 litres facilitates cleaning and maintenance could be used to install an additional electrical heating element or auxiliary heat exchanger ’LS 1500 - 2000’: 2 inspections holes 3 reflex ’SB, SF Hot water heaters’ Technical data reflex ’SB, SF Hot water heaters’ floor standing indirect fired water heater heavy duty S235JRG2 (RSt 37-2) quality steel corrosion resistant glass-lined tank according to German DIN 4753 magnesium anode rod(s) for tank protection high capacity, low pressure-drop glass-lined heat exchanger factory mounted thermometer extra thick (50-80 mm) PU-foam insulation ’SB’ steel jacket in various colours, ’SF’ foil jacket in various colours clean-out and inspection access max. operating pressure: 10 bar (tank), 16 bar (coil) max. operating temperature: 95 °C (tank), 110 °C (coil) 4 Type Capacity Diameter Ø D Height H Heating surface Net weight Inclination height Insulation thickness Hot water outlet WW Cold water inlet KW Circulation Z Boiler supply HV Boiler return HR Sensor tube Flange 4) Heating capacity Continuous rating Recovery rate Performance Article-no. 1) 2) 3) ∆T = 35 °C ∆T = 50 °C ∆T = 35 °C litres mm mm m² kg mm mm R h1 mm R h6 mm R h2 mm R h3 mm R h5 mm Ø internal x L mm h4 mm h7 mm Opening B mm kW l/h min l / 10 min l / 1sth blue orange silver white SB 100 98 512 849 0,61 38 960 50 ¾ 740 ¾ 55 ¾ 605 1 523 1 193 16 x 200 428 248 Rp 1½ 19 480 18 204 593 7763000 7763100 7763900 7763800 SF 120 115 560 800 0,71 42 980 50 ¾ 835 ¾ 835 ¾ 835 ¾ 835 ¾ 835 11 x 450 800 800 125 22 540 18 238 689 ------7759600 SB 150 158 540 1222 0,75 54 1290 50 ¾ 1106 ¾ 55 ¾ 732 1 596 1 191 16 x 200 461 246 150 25 615 22 306 818 7750100 7750600 7764100 7763600 ’SF 750 and 1000’: models with 2 magnesium anodes / removable jacket (delivered separately) without insulation Ø D = 750 mm, H = 1932 mm without insulation Ø D = 850 mm, H = 1959 mm 4) from 100 ltr ’EEHR Electric screw-in heater’ can be fitted on flange → p. 14 (to be ordered separately) from 150 ltr ’EFHR Electric screw-in heater’ can be fitted on flange → p. 14 SB 200 198 540 1473 0,95 65 1530 50 ¾ 1366 ¾ 55 ¾ 899 1 686 1 191 16 x 200 506 246 150 31 760 22 382 1017 7750200 7750700 7764200 7763300 SB 300 300 700 1334 1,45 99 1472 50 1 1226 1 55 ¾ 918 1 720 1 220 16 x 200 548 275 150 48 1170 22 583 1566 7750300 7750800 7764300 7763400 reflex ’SB, SF Hot water heaters’ Technical data ∅D WW ∅D HV, HR WW, KW Z B Z HV h1 H Sensor tube H h7 h1 h2 h3 h4 h5 h6 4) h2 h3 B HR h7 h4 h5 KW h6 120 litres Type Capacity Diameter Ø D Height H Heating surface Net weight Inclination height Insulation thickness Hot water outlet WW Cold water inlet KW Circulation Z Boiler supply HV Boiler return HR Sensor tube Flange 4) Heating capacity Continuous rating Recovery rate Performance Article-no. ∆T = 35 °C ∆T = 50 °C ∆T = 35 °C 100, 150 - 2000 litres SB 400 385 700 1631 1,8 119 1738 50 1 1523 1 55 ¾ 1111 1 908 1 220 16 x 200 683 275 150 57 1395 24 729 1896 7750400 7750900 7764400 7763500 SB 500 478 700 1961 1,9 170 2044 50 1 1853 1 55 ¾ 1264 1 965 1 220 16 x 200 695 275 150 65 1590 26 881 2212 7750500 7751000 7764500 7763700 SF 750 1) 750 910 2) 2000 2) 3,7 241 1990 80 1¼ 1886 1¼ 99 ¾ 1417 1¼ 1314 1¼ 288 16 x 200 1079 378 225 99 2440 27 1371 3398 ------7754600 SF 1000 1) 982 1010 3) 2025 3) 4,5 304 2025 80 1¼ 1900 1¼ 103 ¾ 1489 1¼ 1324 1¼ 296 16 x 200 1087 387 225 110 2715 31 1714 3967 ------7754700 SF 1500 1) 1500 1200 2216 6,0 480 2520 100 2 2048 2 105 1¼ 1660 1¼ 1543 1¼ 333 16 x 250 1140 412 225 156 3833 34 2566 5761 ------7800700 SF 2000 1) 2000 1400 2126 7,0 650 2545 100 2 1937 2 118 1¼ 1670 1¼ 1568 1¼ 360 16 x 250 1175 443 225 196 4816 36 3373 7387 ------7800800 5 reflex ’SF/2 Solar hot water heaters’ Technical data reflex ’SB/2, SF/2 Solar hot water heaters’ floor standing indirect fired/solar water heater heavy duty S235JRG2 (RSt 37-2) quality steel corrosion resistant glass-lined tank according to German DIN 4753 magnesium anode rod(s) for tank protection high capacity, low pressure-drop glass-lined heat exchangers factory mounted thermometer extra thick (50-80 mm) PU-foam insulation opening for an additional electrical heating element ’SB’ steel jacket in various colours, ’SF’ foil jacket in various colours clean-out and inspection access max. operating pressure: 10 bar (tank), 16 bar (coil) max. operating temperature: 95 °C (tank), 110 °C (coil) 6 Type Capacity Diameter Ø D litres mm mm upper / m² lower / m² kg mm mm R h1 mm R h9 mm R h4 mm R h2 mm h5 mm h6 mm h8 mm Ø internal x L mm h3 mm heating h7 mm solar h10 mm Opening B mm h11 mm / Rp 1½ Height H Heating surface Net weight Inclination height Insulation thickness Hot water outlet WW Cold water inlet KW Circulation Z Boiler supply WW Boiler return HR Solar supply SV Solar return SR Sensor tube Flange 3) Plug for electrical element 4) Upper coil / heating heating capacity kW Continuous rating ∆T = 35 °C l / h Recovery rate ∆T = 50 °C min Performance ∆T = 35 °C l / 10 min l / 1sth Lower coil / solar heating capacity kW Continuous rating ∆T = 35 °C l / h Recovery rate ∆T = 50 °C min Performance ∆T = 35 °C l / 10 min l / 1sth Article-no. Color blue orange silver white grey SF 200/2 SB 300/2 SF 300/2* SF 400/2 24 550 29 371 871 26 630 40 486 1019 26 630 40 490 1022 31 740 45 616 1251 31 760 22 399 1034 ------7743400 --- 48 1170 22 576 1559 7740100 7740000 7740800 7741500 --- 48 1170 22 580 1810 --------7753300 57 1395 25 722 2193 7753500 7753600 7740900 7741300 --- 191 540 1473 0,70 0,95 70 1530 50 ¾ 1366 ¾ 55 ¾ 899 1 1146 786 686 191 16 x 200 1011 280 246 150 736 * model with lower height ** removable jacket (delivered separately) 295 600 1834 0,80 1,55 106 1892 50 1 1725 1 90 ¾ 1179 1 1424 1064 964 254 16 x 200 1289 403 324 150 1013 1) 2) 298 700 1334 0,85 1,45 106 1472 50 1 1226 1 55 ¾ 625 1 1048 790 715 220 16 x 200 920 306 275 150 755 380 700 1631 1,05 1,80 130 1738 50 1 1523 1 55 ¾ 1111 1 1354 1006 909 220 16 x 200 1223 369 275 150 957 without insulation Ø D = 750 mm, H = 1932 mm without insulation Ø D = 850 mm, H = 1959 mm reflex ’SF/2 Solar hot water heaters’ Technical data ∅D WW HV Sensor tube Z HR 4) SV M h1 H h2 h3 h4 h5 h11 Sensor tube h6 3) SR B h8 KW h10 h7 h9 Type Capacity Diameter Ø D SF 500/2 Height H Heating surface Net weight Inclination height Insulation thickness Hot water outlet WW Cold water inlet KW Circulation Z Boiler supply WW Boiler return HR Solar supply SV Solar return SR Sensor tube Flange 3) Plug for electrical element 4) Upper coil / heating heating capacity kW Continuous rating ∆T = 35 °C Recovery rate ∆T = 50 °C Performance ∆T = 35 °C Lower coil / solar heating capacity Continuous rating Recovery rate Performance Article-no. 3) kW ∆T = 35 °C ∆T = 50 °C ∆T = 35 °C 470 700 1961 1,30 1,90 160 2044 50 1 1853 1 55 ¾ 1264 1 1604 1114 965 220 16 x 200 1409 380 275 150 1040 SF 750/2** 750 910 1) 2000 1) 1,17 1,93 231 1990 80 1¼ 1887 1¼ 99 ¾ 1242 1 1467 1151 830 288 16 x 200 1332 402 378 225 1005 SF 1000/2 995 1010 2) 2025 2) 1,12 2,45 291 2025 80 1¼ 1905 1¼ 103 ¾ 1243 1 1423 1153 884 297 16 x 200 1333 411 387 225 1025 SF 1500/2 1500 1200 2) 2216 2) 1,9 3,8 495 2250 100 2 2048 2 105 1¼ 1660 1 1660 1153 884 333 20 x 250 1140 411 412 225 --- SF 2000/2 2000 1400 2) 2025 2) 2,37 4,74 670 2200 100 2 1937 2 118 1¼ 1695 1 1613 1224 1080 360 20 x 250 1350 510 443 225 --- 40 970 44 769 1588 33 815 80 1100 1776 32 780 109 1418 2073 57 1390 92 2160 3319 72 1760 97 2865 4331 65 1590 27 871 2586 7754000 7754100 7741000 7741400 --- 60 1460 44 1211 2890 ------7743200 --- 76 1870 46 1598 3692 ------7743300 --- 99 2430 53 2334 4358 ------78.00.750 --- 112 2749 63 3030 5320 ------78.00.850 --- ’EFHR/EEHR Electric heater’ can be fitted on flange (accessories → p. 14) 4) Performance based on: ∆T boiler = 80-60 °C, T storage = 60 °C, T mixed water = 45 °C, T cold water = 10 °C 7 reflex ’US Hot water heaters’ Technical data reflex ’US Hot water heaters’ horizontal indirect fired water heater heavy duty S235JRG2 (RSt 37-2) steel corrosion resistant glass-lined tank according to German DIN 4753 magnesium anode rod for tank protection high capacity, low pressure-drop glass lined heat exchanger factory mounted thermometer extra thick PU-foam insulation steel jacket in various colours robust frame to carry 240 kg max. operating pressure: 10 bar (tank), 16 bar (coil) max. operating temperature: 95 °C (tank), 110 °C (coil) T WW HV Z H h1 h3 h4 HR KW h6 h5 Type 8 Capacity Height / Length H Width T Heating surface Weight Hot water outlet WW Cold water inlet KW Circulation Z Boiler supply WW Boiler return HR Sensor tube Continuous rating Recovery rate ∆T = 35 °C Performance 1) ∆T = 35 °C Article-no. ∆T = 50 °C litres mm mm m² kg R h1 mm R h6 mm R h2 mm R h3 mm R h5 mm Ø internal x L mm h4 mm l/h min l / 10 min l / 1sth blue orange silver white 1) US 150 US 250 150 590 995 0,9 67 1 485 1 95 ¾ 290 ¾ 380 ¾ 380 16 x 250 265 740 18 316 930 7762000 7765000 7765000 7761900 250 644 1095 0,9 99 1 580 1 60 ¾ 320 1 552 1 90 16 x 200 280 755 29 445 1059 7762500 7765100 7765100 7761300 Performance based on: ∆T boiler = 80-60 °C, T storage = 60 °C, T mixed water = 45 °C, T cold water = 10 °C h2 reflex ’WPS Water heaters for heat pumps’ Technical data ∅D reflex ’WPS Water heaters for heat pumps’ WW floor standing indirect fired water heater destined for heat pump applications heavy duty S235JRG2 (RSt 37-2) steel corrosion resistant glass-lined tank according to German DIN 4753 great heating surface by means of coil-in-coil construction ensuring best energy transfer performance magnesium anode rod for tank protection factory mounted thermometer extra thick PU-foam insulation with foil jacket in white colour max. operating pressure Tank - 10 bar Coil - 16 bar max. operating temperature Tank - 95 °C Coil - 110 °C Sensor tube 1 HV H Z Sensor tube 2 h2 h3 h4 h5 B HR h8 KW h7 Type Capacity Diameter Ø D Height H Heating surface Weight Inclination height Insulation thickness Hot water outlet WW Cold water inlet KW Circulation Z Boiler supply HV Boiler return HR Sensor tube 1 Sensor tube 2 Flange 1) Continuous rating Recovery rate Performance Article-no. ∆T = 35 °C ∆T = 50 °C ∆T = 35 °C litres mm mm m² kg mm mm R h1 mm R h7 mm R h4 mm R h3 mm R h6 mm Ø internal x L mm h2 mm Ø internal x L mm h5 mm Opening B mm h8 mm l/h min l / 10 min l / 1sth white h1 WPS 300 WPS 400 WPS 500 288 700 1334 3,2 145 1472 50 1 1226 1 55 ¾ 544 1 784 1 220 16 x 60 874 16 x 60 466 150 275 270 91 315 640 7772300 356 700 1634 5 185 1738 50 1 1526 1 55 ¾ 666 1 1100 1 220 16 x 60 1190 16 x 60 592 150 275 417 73 527 874 7772400 450 700 1961 5 235 2044 50 1 1853 1 55 ¾ 855 1 1099 1 220 16 x 60 1190 16 x 60 699 150 275 417 93 712 1052 7772500 1) ’EFHR Electric screw-in heater’ or ’RWT Ribbed-tube heat exchanger’ can be fitted on flange → p. 14 h6 9 reflex ’VKS Combination tank-in-tank’ Technical data reflex ’VKS Combination tank-in-tank’ buffer tank welded-in heating coil and integrated 200 l glass-lined tank for sanitary hot water use corrosion resistant glass-lined tank according to German DIN 4753 buffer tank manufactured of steel, externally painted with protective coating high performance heating coil magnesium anode rod for tank protection various pocket tubes at different locations for temperature sensors extra thick PU foam insulation with foil jacket in white colour (delivered in a separate package) max. operating pressure Buffer tank - 3 bar Glass-lined tank - 10 bar Heating coil - 16 bar max. operating temperature Buffer tank - 95 °C Glass-lined tank - 95 °C Heating coil - 110 °C Type 10 VKS 600/200 VKS 750/200 VKS 900/200 Capacity - storage tank Capacity - hot water litres litres 402 200 580 200 655 200 Diameter Ø D mm 900 990 990 Diameter Ø D Height H incl. thermal insulation Height Net weight Inclination height Hot water outlet WW mm mm h1 mm kg mm R h1 mm R h1 mm R h1 mm G Rp h2 mm Rp h3 mm Rp h4 mm Rp h5 mm Rp m² litres Rp h6 mm Rp h7 mm white 790 1910 1844 200 1868 ¾ 1844 ¾ 1844 ¾ 1844 1 x 550 1 1599 1 1244 1 906 1 184 790 2080 2006 214 2028 ¾ 2006 ¾ 2006 ¾ 2006 1 x 550 1 1761 1 1334 1 996 1 184 ⅜ 2,6 18,3 1 832 1 292 7774750 ⅜ 3,0 21,3 1 922 1 292 7774900 incl. thermal insulation Cold water inlet KW Circulation Z Anode Boiler supply KV Heating circuit supply HV Boiler return KR Heating circuit return KR/HR Relief valve Solar heating surface Capacity heat exchanger Solar supply SV Solar return SR Article-no. 700 1880 1808 178 1830 ¾ 1808 ¾ 1808 ¾ 1808 1 x 550 1 1586 1 1239 1 893 1 170 ⅜ 2,1 14,5 1 773 1 278 7774600 reflex ’VKS Combination tank-in-tank’ Technical data ∅D ∅ D1 WW Z KW KV HV H h1 KR SV h2 h3 h6 h4 SR K/HR h7 h5 ’VKS Combination tank-in-tank’ with ’VKW Thermal insulation’ reflex ’VKW Thermal insulation’ for combination with tank-in-tank system ’VKS’ 100 mm-thick soft PU-foam insulation (CFC-free) foil finish suitable for heating applications only (for cooling purposes all-round insulation to be built on-site) Type Article-No. white VKW 600/200 9203200 VKW 750/200 9203201 VKW 900/200 9203202 Weight € 13 15 18 Product group 61 61 61 ØD mm 900 990 990 H mm 1880 1910 2080 11 reflex ’LS Hot water storage tank’ Technical data reflex ’LS Hot water storage tanks’ storage tank for hot water heating purposes heavy duty S235JRG2 (RSt 37-2) quality steel corrosion resistant glass-lined tank according to German DIN 4753 magnesium anode rod for tank protection factory mounted thermometer extra thick (50 - 100 mm) PU soft foam insulation (delivered separately) opening for additional electrical heating element(s) (→ kW input capacities on p. 14) clean-out and inspection access max. operating pressure: 10 bar max. operating temperature: 95 °C 12 Type Capacity Diameter Ø D Height H Weight Inclination height Insulation thickness Battery charging L Hot water outlet WW Cold water inlet KW Circulation Z Sensor tube Flange 5) Article-no. 1) 2) 3) litres mm mm kg mm mm R h1 mm R h2 mm R h6 mm R h3 mm Rp h4 mm h5 mm h7 mm h8 mm Opening B mm white LS 300 300 600 1834 87 1892 50 1½ 1546 1½ 1546 1½ 272 ¾ 1180 ½ 1180 272 325 --150 6500500 LS 500 500 700 1961 96 2044 50 1½ 1672 1½ 1672 1½ 238 ¾ 1265 ½ 1265 238 275 --150 6500600 without insulation ∅ D = 750 mm, H = 1932 mm without insulation ∅ D = 850 mm, H = 1959 mm without insulation ∅ D = 1000 mm, H = 2122 mm 4) without insulation ∅ D = 1200 mm, H = 2033 mm 5) 6) ’EEHR Electric screw-in heater’ can be fitted on flange → p. 14 (to be ordered separately) ’EFHR Electric screw-in heater’ can be fitted on flange → p. 14 ’RWT Ribbed-tube heat exchanger’ can be fitted on flange → p. 14 from ’LS 1500’ with 2 inspection openings LS 750 750 910 1) 2010 1) 195 1990 80 2 1908 2 1638 2 88 1¼ 1143 ½ 943 288 378 --225 6500000 LS 1000 1000 1010 2) 2035 2) 248 2025 80 2 1911 2 1646 2 92 1¼ 1154 ½ 951 296 387 --225 6500100 LS 1500 1500 1200 3) 2215 3) 366 2220 100 2 2049 2 1782 2 105 1¼ 1357 ½ 1077 322 412 812 225 6500300 LS 2000 2000 1400 4) 2126 4) 522 2235 100 2 1933 2 1648 2 118 1¼ 1388 ½ 1108 353 443 843 225 6500400 LS 3000 3000 1400 4) 2876 4) 630 2848 100 2 2691 2 2406 2 235 1¼ 1966 ½ 1546 391 481 881 225 6501200 reflex ’LS Hot water storage tank’ Technical data ∅D L ∅D WW WW, L Z H h1 h2 h1 Sensor tube Z h2 6) B h3 H h4 h3 h4 h8 B B 5) Sensor tube Sensor tube/KW h5 h7 KW h7 h6 h6 ’LS 300 - 500’ h5 KW ’LS 750 - 3000’ 13 reflex ’Hot water heaters’ Accessories reflex ’EEHR Electric screw-in heater’ for (additional) heating purposes for reflex ’Hot water heaters’, ’Solar hot water heaters’, ’Hot water storage tanks’ to be used as back-up for space/solar heating; max. water hardness 14 °dH control thermostat up to 95 °C and pilot lamp Type EEHR 1,8 EEHR 2,4 EEHR 3,0 EEHR 4,5 * EEHR 6,0 EEHR 8,0 EEHR 10,0 Article-No. 9200277 9200278 7755100 7755300 7755400 7755550 7755600 Weight kg 1.75 1.75 1.75 1.85 1.90 2.20 2.35 Product group 68 68 68 68 68 68 68 Storage size/l > 100 > 100 > 100 > 300 > 300 > 750 > 1000 Power kW 1.8 2.4 3.0 4.5 6.0 8.0 10.0 Voltage V 230 230 230 400 400 400 400 L mm 375 375 375 450 510 620 750 * not for ’SB/SF 300/2’, Ø 600 reflex ’EFHR Electricflange heater’ suitable for continous operation as electrical heating 3 power levels, reconnectable safety temperature cut-off max. 120 °C control thermostat up to 95 °C on-site electrical connection including flange and sealing Type Article-No. EFHR 4,0 EFHR 6,0 * EFHR 8,0 * EFHR 10,0 EFHR 16,0 EFHR 19,0 EFHR 25,0 9116314 9116315 9116316 9116317 9116501 9116502 9115569 Weight kg 4.7 4.8 5.0 5.2 10.5 11.0 11.5 Product group 68 68 68 68 68 68 68 Storage size/l 150 - 500 300 - 500 300 - 500 300 - 500 750 - 1000 1000 -2000 1000 -2000 Power Voltage kW V 4,0 / 2,7 / 2,0 400 6,0 / 4,0 / 3,0 400 8,0 / 5,5 / 4,0 400 10,0 / 6,7 / 5,0 400 16,0 / 11,0 / 8,0 400 19,0 / 12,7 / 9,0 400 25,0 / 18,8 /12,5 400 L mm 295 395 495 495 610 740 740 B mm 150 150 150 150 225 225 225 H mm 110 110 110 110 140 140 140 D mm 185 185 185 185 280 280 280 * not for ’SB/SF 300/2’, Ø 600, ’WPS 300-500’ reflex ’RWT 1 Ribbed-tube heat exchanger’ to connect to an additional heat generator, e.g. a fire place G¾ or a solar energy system suitable for heating water, district water and solar fluid made of ribbed copper tube max. operating pressure 10 bar max. operating temperature 90 °C Type RWT 1 RWT 2 Article-No. 7755900 7756300 Weight kg 5.5 7.5 Product group 68 68 W 14 D Power kW 9 - 11 31 - 39 Surface m² 1,1 2,3 B mm 150 225 L D mm 110 170 L mm 420 540 reflex ’Hot water heaters’ Accessories Flange cap for ’EEHR’ for reflex ’Hot water heaters’ and ’Hot water storage tanks’ Rp 1½ socket for screw-in element ’EEHR’ replaces the factory-mounted blank flange of the inspection access gasket ring to be ordered separately Storage size 150 - 500 750 - 2000 Dichtung 150 - 500 750 - 2000 Article-No. 7760000 7760100 Product group 68 68 7760900 7761000 68 68 reflex ’Control thermostat’ for activation/deactivation of water heater pump (in the abscence of built-in temperature regulator in boiler)* 15 temperature range 30 - 80 °C differential gap 6K switching capacity 16 (5) A/ 230 V protection type IP 40 to be fitted in the water heater sensor tube with a clip-spring Article-No. 7751100 Product group 68 * not for ’SF 120’, ’US 150 - 250’, ’PH, PHF, PHW Buffer tanks’ Accessories and spare parts for reflex ’Hot water heaters’ * Power anode G ¾ x 400 mm (230 V) Power anode for ’SF 1500 - 2000’, G 1¼ x 800 mm (230 V) Anode for 100 litres, G 1 x 26 x 420 mm 120 litres, M 8 x 26 x 420 mm 150 litres, G 1 x 26 x 480 mm 200 litres, G 1 x 26 x 550 mm 300 litres, G 1 x 26 x 800 mm 400 litres, G 1 x 26 x 900 mm 500 litres, G 1 x 26 x 1100 mm 750 litres, G 1¼ x 33 x 530 mm (2 pcs. required) 1000 litres, G 1¼ x 33 x 625 mm (2 pcs. required) 750/2 litres, G 1¼ x 33 x 1060 mm 1000/2 litres, G 1¼ x 33 x 1250 mm ** Flexible anode, G 1 x 22 x 1600 mm Thermometer for pocket tube ½” (bi-metal) * not for ’SF 120’ Article-No. 7751300 9119365 7751580 7757400 7751400 7751500 7751510 7751520 7751530 7751540 7751610 7751570 7751590 7751600 7751200 Product group 68 68 68 68 68 68 68 68 68 68 68 68 68 68 68 ** not for ’SF 120’, ’SF 750 - 1000’, ’US 150 - 250’, ’LS 750 - 2000’ Reflex – Responsibility in the interests of the environment New Reflex technologies are to provide advantages not only to human beings, but also to the environment. This is the principle on which we base all our development, planning, and manufacturing. PI0205enE / 9571096-3000 / 11 - 10 Subject to modifications We comply with our responsibility as manufacturer by the purposeful selection of materials and production technologies - the environmental - impacts are as low as possible. Reflex Winkelmann GmbH + Co. KG Gersteinstrasse 19 59227 Ahlen Germany Tel. +49 23 82 70 69 - 0 Fax +49 23 82 70 69 - 558 www.reflex.de
© Copyright 2024