Download Report

American Petroleum Institute Programs
API104 - API 510 Pressure Vessel Inspector Certification Preparatory Course (12 – 23 October 2014, Dubai)
TÜV®
Akademie
API104 - API 510 Pressure Vessel Inspector Certification Preparatory
Course (12 – 23 October 2014, Dubai)
Course Description
Who Should Attend?
This 10 days training course is designed to give a detailed understanding of the required engineering knowledge for In-service Pressure Vessel Inspection (API 510) and provide adequate
preparation before appearing for examination. This preparatory
course will cover the fundamental Pressure Vessel Design with
emphasis on syllabus published by API body for the said examination. It includes all the code sections referred by API 510
committee to the extent required from examination point of view.
This course will clarify basic intentions of all code sections, how
to interpret code rulings and build-up the confidence among the
participants for taking decisions. The course covers five main
areas: Basic Pressure Vessel Design engineering i.e. ASME
Sec VIII Div 1, In-service inspection techniques (API 510/ 572/
576/ 577), and In-service degradation mechanisms (API 571),
calculations of retirement thickness and other aspects required
for taking Run-Repair-Replace decisions.
The participants will receive comprehensive course notes, illustrated with practical examples, Mock-examinations, main
punch-points of the course and extensive question banks to give
the participants the confidence for getting certified successfully.
Pressure Vessel inspection Engineers, Managers, Inspection
personnel, Plant operating Engineers and Managers, and those
who wish to appear for API 510 examination. Maintenance engineers and technicians and people involved in trouble shooting
of plant operations.
This course will be equally beneficial to all QA/Qc engineers
even though they may or may not be planning to take API 510
examination.
Course Objectives
n To familiarize participants with the main concepts and techni-
cal terms of API 510 Code
n To provide participants step-by step approach in use of API
510 Inspection Code, with clear understanding of stated and
intended requirements.
n Understand basic design and the rules for correct fabrication,
inspection and testing of Pressure Vessels
n How to Conduct and certify the pressure testing.
n To know the in-service degradation and damage suffered by
Pressure vessels.
n To learn the basic requirements for inspection of Pressure
vessels placed in service.
n To calculate corrosion rate, interval of inspection and similar
parameters of Vessel inspection
n To be able to choose the appropriate inspection tools and
inspection intervals
n Carry out re-rating, remaining life and retirement thickness
calculations
n Calculate and certify the correct set pressure of pressure relieving device
n To know learn different methods of Vessel repairs, and integrity assessments, Score very well in API 510 examination
Course Outline
n Module -1 Concepts related to new Vessels, ASME Sec.
VIII.
Introduction to API 510 Certification
Guidelines for preparation for examination
Design of Cylindrical shells, Calculation of vessel MAWP
Static head calculations, Design of Dished heads - Hemispherical, Ellipsoidal, Torispherical
Calculate vessel MAWP given vessel parts MAWP and
elevations, Impact testing requirements, How to conduct and
certify Pressure tests, Writing hydro test Procedure & pneumatic test procedure, Key concepts of Nozzle reinforcement
Inspection requirements for Pressure Vessels
NDT of Pressure Vessels
Fabrication and Heat treatment requirements
Module -2 Concepts related to Inspection of in-service
n Vessels API 510
Inspection and testing practices for In-Service Vessels as
per API 510, Typical degradation mechanisms in Pressure
vessels, Monitoring degradation mechanisms
Inspection Plans , Pressure vessel inspection External, Internal ,On-stream Inspection
Inspection and testing of Pressure relieving devices
Corrosion Rate Determination , Remaining Life Calculations
Frequency and Time of Inspection, Evaluation of Locally
thinned Areas, Evaluation of Pitted surface
Correction of Weld joint Efficiency, Repairs, alterations & rerating of Pressure Vessels, Reports and Records
Sample Inspection Record
n Module -3 Other related codes, standards and recommended practices
Detail discussions on Damage Mechanisms (API 571)
Introduction to ASME Sec IX and its requirements
Understanding of PQR and WPS , Welding procedure qualification & welder qualification,Understanding rules imposed
by ASME Sec V for various NDE techniques
Inspection of pressure relief devices (API RP 576)
Safety valves, Relief valves, Safety Relief valves
Balanced Safety Relief valves, Inspection and Test Procedures of pressure relief devices, Discussions on Welding
Inspection and Metal¬lurgy (API RP 577)
Practice examinations close book and open book
Concluding Session.
API104 - API 510 Pressure Vessel Inspector Certification Preparatory
Course (12 – 23 October 2014, Dubai)
Terms & Conditions
About the Instructor
n TÜV Middle East Certificate will be issued to all attendees.
n Course Fee mentioned is per delegate.
n Avail an attractive 10% discount on course fee if you
register 30 days before course start date.
n Courses will be conducted during the designated
dates at a 4 star or 5 star hotel in the designated city.
n Payments to be made in advance. Exact venue of the
training will be notified two weeks prior to course start
date.
n This rate includes course notes, buffet lunch, coffee/
tea on arrival, morning and afternoon of each day.
n Accomodation is not included in course fees. However, any accomodation required can be arranged by
TÜV Middle East at time of booking.
Mr. Chintamani M. Khade,
For further details and up to date terms and conditions,
visit http://www.tuvme.com/tac.pdf
Duration
10 days - 08:00am until 03:30 pm daily
Location & Date
Dubai, 12 – 23 October 2014
Participation Fee
US$ 4,900 per participant
Your Contact
Ms. Annie Cabarles
Tel: +971 2 4411148
Email: [email protected]
n API 653 Authorised Storage Tank Inspector.
Cert. No. 27295.
n API 510 Authorised Pressure Vessel Inspector.
Cert. No. 36311.
n API 570 Authorised Process Piping Inspector.
Cert. No. 38775.
n API 571 Authorised Damage Mechanism.
Cert. No. 27295.
n API 580 Authorised Risk Based Inspection.
Cert. No. 36311.
n API SI Authorised Source Inspector.Cert. No. 38775.
n
n
n
n
Level II (ASNT) UT of T,K,Y joints as per API
Welding Inspector (ISNT)
ASNT Level III (ASNT) UT, MT, RT, PT, VT, LT, ET & IR
Cert No 126348. ( Level III in 8 methods)
Level 3 PED (EN 473) UT, PT, VT Cert no. 04-502-04964
Level 3 (EN 473/ ISO 9712) UT, MT, RT, PT & VT
Welding Inspector (TWI) CSWIP 3.1Cert No. 58523
Mr. Khade is a Mechanical Engineer, with more than 20
years experience as Tank Specialist in field of Design,
Detailing, Fabrication, Field erection, testing and certification of Storage Tanks. He has handled all types of tanks
including Fixed Cone roof and Dome roof Tanks; Floating roof Tanks (Pontoon type, Double Deck Type; Internal
Floating roof Tanks); Geodesic Roof Tanks etc. Led team
of multidiscipline engineers at various tank construction
projects involving all aspects of tank Design, construction, erection procedures, Welder qualification & welding
inspection, Hydro testing, tank calibration and handing
over. at various stages He has carried out Inspection and
integrity assessment of in-service tanks including repairs
and replacement of tanks as per API 653.
He worked on Tank projects in India, Middle East & Africa. He also carried out NDT, Ultrasonic thickness gauging, flaw detection, vacuum box leak testing, & advanced
inspection like tank bottom scanning by Magnetic flux
leakage Testing of existing tanks. He worked as API inspector & project coordinator for Qatar Fuel Additives Co.
(QAFAC), Massaid, Qatar, and executed in service tank
inspection as per API 653 including Acoustic emission
testing of tank bottoms for corrosion assessment on entire Tank farm having various services & designs. He has
Conducted several training courses in Storage Tanks as
per API 650, API 653, and NDT in South-East Asia and
Gulf countries.
Registration
Please visit www.tuvakademie.net for details on courses we offer and more updated information. You can also
register online.
For applications by mail / fax, please fill the form below and send to address below :
TÜV Middle East
P. O. Box 46030
Abu Dhabi, United Arab Emirates
Fax Number : +971 2 4411149
API104 - API 510 Pressure Vessel Inspector Certification Preparatory
Course
Date
Location
Yes, register me for the training.
Company Information
Company Name
Address Line 1
Address Line 2
City
Country
Telephone
Fax
Industry
Number of employees
Participant Information
Name
Job Title
Email
I agree that TÜV Middle East can send me periodic emails about news and latest course offerings to my email.
I / we acknowledge to the terms and conditions of the organizer
Location & Date
Signature
TÜV Middle East
P. O. Box 46030
Abu Dhabi, United Arab Emirates
Tel : +971 2 4411148
Fax : +971 2 4411149
[email protected]
www.tuvakademie.net | www.tuv-nord.com
TÜV Middle East • All rights reserved
Akademie