L-012 The L-012 is a solid brass steplight with a recessed housing. Construction: Cast brass faceplate. 1/8” [3mm] thick brass recessed housing. Lens: Tempered soda lime glass. Lens Options: __ CL __ FR __ RT Voltage: 12 Volts AC. Remote transformer required. Mounting: Suitable for outside recessed wall mounting only, in both combustible and non-combustible applications. A 3” diameter x 4.5” deep [7.6cm x 11.4cm] hole is required. A spacer is included for this purpose. Lamps: Combustible surface installation limited to 10 Watt max. MR16 Halogen 50 Watt maximum MR16 LED GU5.3 base Warm White (3000K) Clear Frosted Rectilinear spread __ BAB __ BAB/60 __ FMW __ FMW/60 __ EXN __ FNV 20 Watt 20 Watt 35 Watt 35 Watt 50 Watt 50 Watt 36° 60° 36° 60° 36° 60° __ 5W-FL __ 9W-FL 5 Watt 9 Watt 36° flood 36° flood narrow flood flood narrow flood flood narrow flood flood GROOVED FOR HEAT DISSIPATION 2.1" [5.2cm] Ø2.5" [6.3cm] Finish: Unfinished is standard; no specification required. The fixture will weather to a natural patina. The patina process is natural with brass and copper. Rate of patina and eventual color is dependent upon climate and proximity to the ocean. Thus, Beachside does not guarantee any specific appearance. Ø4.4" [11.1cm] WALL-MOUNT BRACKET Ø3" x 4.5" COPPER TUBING (2) HOLES EACH IN BACK AND SIDE FOR 1/2" CONDUIT Weight: 3.7 lbs. [1.7 kg] IP 67 CSA Listed 10 year fixture warranty 3 year warranty on MR16 LED lamps Project L-012 Fixture MADE IN USA By For ordering purposes, please specify (example: L-012―CL―9W-FL) Lens Date Lamp BEACHSIDE LIGHTING ● 800-405-6732 ● www.BeachsideLighting.com October 2014