L-012 The L-012 is a solid brass steplight with a recessed housing. Construction: Cast brass faceplate. 1/8” [3mm] thick brass recessed housing. Lens: Tempered soda lime glass. Lens Choices: __ CL __ FR __ RT Voltage: 12 Volts AC. Remote transformer required. Mounting: Suitable for outside recessed wall mounting only, in both combustible and non-combustible applications. A 3” diameter x 4.5” deep [7.6cm x 11.4cm] hole is required. A spacer is included for this purpose. Lamps: Combustible surface installation limited to 10 Watt max. Clear glass Frosted glass Rectilinear spread lens MR16 Halogen 50 Watt maximum __ BAB __ BAB/60 __ FMW __ FMW/60 __ EXN __ FNV MR16 LED Cree chipset, GU5.3 Amber (1500K) __ 5W-A-NFL 5 Watt Amber MR16 LED Cree chipset, GU5.3 Warm White (3000K) __ 5W-SP __ 5W-NFL __ 5W-FL __ 5W-WFL 5 Watt 5 Watt 5 Watt 5 Watt 15° spot 25° narrow flood 40° flood 100° wide flood MR16 LED __ 9W-SP Soraa chipset, GU5.3 __ 9W-NFL Warm White (3000K) __ 9W-FL 9 Watt 9 Watt 9 Watt 10° spot 25° narrow flood 36° flood 20 Watt 20 Watt 35 Watt 35 Watt 50 Watt 50 Watt 36° 60° 36° 60° 36° 60° GROOVED FOR HEAT DISSIPATION narrow flood flood narrow flood flood narrow flood flood 2.1" [5.2cm] 25° narrow flood WALL-MOUNT BRACKET Finish: Unfinished is standard; no specification required. The fixture will weather to a natural patina. The patina process is natural with brass and copper. Rate of patina and eventual color is dependent upon climate and proximity to the ocean. Thus, Beachside does not guarantee any specific appearance. Ø3" x 4.5" COPPER TUBING (2) HOLES EACH IN BACK AND SIDE FOR 1/2" CONDUIT Ø2.5" [6.3cm] Weight: 3.7 lbs. [1.7 kg] Ø4.4" [11.1cm] IP 67 CSA Listed, file #190030 10 year fixture warranty 3 year warranty on MR16 LED lamps Project L-012 Fixture MADE IN USA By For ordering purposes, please specify (example: L-012―CL―9W-FL) Lens Date Lamp BEACHSIDE LIGHTING ● 800-405-6732 ● www.BeachsideLighting.com October 2014